Jet Engine 4 needed for Creative Media Source Corrupt Libr

I have seen this asked before but not answered well.
I just installed Creative Media source for Zen Touch. When I bring up Creative Media source it says that I have a corrupt media library and need to download current Jet Engine 4 from Microsoft. I do that but when I try to upgrade it get the message that I already have a newer version on my computer. I have tried uninstalling and reinstalling with same result.
Is this bad software (Creative Media Source) or screwed registry or whatever on my computer.
Better yet can I remove Creative Media Source and just use Microsoft Media 0, i.e. will the necessary drivers be available?
Creative Nomad Explorer seems to be working ok?

Dusty,
Have you also installed the Microsoft Data Access Components (MDAC) 2.8 available from Microsoft?
You can find the MDAC here - MDAC_TYP.EXE
If the difficulty persists, you can uninstall MediaSource via Add/Remove Programs Wizard in Control Panel, delete the MediaSource folder in n C:\Program Files\Creative and reinstall it.
Jason

Similar Messages

Creative Media Source - PC Music Library Corrupt

0Creative Media Source - PC Music Library Corrupt? After doing some backup utilities on my music archi've, and relocating them to a new larger dri've, I am now receiving messages that my PC Music Library is corrupt, and is unusable. All of my playlists are gone, and I can't make new ones. it attempts to access a backup copy of the PC Music Library, fails at that as well, then reports it will make a new one. This fails as well, and the message recommends to repair the Microsoft jet Databse Engine and the MDAC, etc.
So naturally, I go to the Microsoft website, as instructed by Creative, and that's about as useful as you'd expect...none.
I have attempted to delete what remains of the old one, both via Media Source and Windows (XP),? and have even reinstalled media source. The problem persists. I'm less concerned about recovery of the old playlists than I am simply starting over with new ones (it was time for a redo anyways).
Media Source itself works fine in all other apsects. It can read files, play music, and interact with my Creative Zen Xtra device. But it's all useless if I can't make playlists for use on the PC and transfer to the Zen.
Anyone have any ideas? I just want to be able to use my stuff again.

Re: Creative Media Source - PC Music Library Corruptn Wasn't aware that it was possible, and haven't seen anything that tells how it could be done. Typically I make my playlists in Creative Media Center, in Organizer mode. As I'm pawing through the archi've and want to add a specific track to a playlist, I? right-click>add to playlist, select the playlist from the drop-down, and move on.
After deleting the old corrupted playlist files, and starting over from scratch, here is what happens:? I attempt to add a track to a playlist...no playlists exist, so I create one on the spot. Upon submitting the info, CMS crashes. ? I reopen CMS, now the PC Music Library is corrupted again, the backup is corrupted, and no playlists exist, etc. At that point, I can delete the playlist files again, and start the process over again (resulting in the same: CMS crashes and I have corrupted playlists.)

Mp3 player not showing on sources for Creative Media Souce 5

I've reinstalled XP (for some unrelated reason) and all my Creative applications work fine except for some reason Creative Media Source 5 isn't showing me my player so I can drag my music to my device. I've reinstalled it, downloaded drivers (from disc) but nothing works. Creative recognize the the device is plugged in. I can synchronize, add media through the Import Wizard but I can't have it listed on Media Source. (image provided) Please help
http://i446.photobucket.com/albums/q...nOrganizer.jpg

reynald wrote:
I can't download the plugin. It says "Setup could not detect the minimum version of Creative 5 5.0.38 in your system." I have version 5.0.25 but when i check for updates it says i already have the latest update.
http://support.creative.com/download...ownloadId=9834

Creative media source and Live!

Does anybody knows what is list of selected cards that can use crossfading in Creative media source?
Why Li've! 5. cannot? Not even EAX?
Thanks in advance

If you have the newer 24-bit versions of the Li've cards then disregard the following.
Perhaps you've installed some of that updated modded stuff? (I've tried it at times too, but always returned to the official 252 driver/software Uni-Pack stuff.)
The software you've got is not designed for the Li've series of cards. If you used the official cd's for the Audigy 2 series (not ZS), it all works as long as you choose not to install EAX Console and Speaker Calibrator. You should also not install MediaSource Player, choosing instead the PlayCenter 3.02.52 and , on XP, updating it to 3.02.70.
You'll probably need to use the ctcomp.exe (search) on the Audio\language\Setup\Setup.exe file. So you'd need the cd copied to a folder on your harddri've so you can let ctcomp adjust the files.
Then you run AudioHQ and choose to run on startup and load in systray in the options dropdown and use the EAX Control applet to control your effects. The AdvancedEQ effects work as long as you choose the effect, click the ParametricEQ in the center, then tick the volume slider tab with your mouse, exit and save. You need to do this everytime you apply an effect.
Or, you can install the U-UPAX stuff which has been modded (driverheaven forum for links). I believe MediaSource works with their setup.
I'm telling you though, your card will not give you any extra stuff it is not hardware designed to provide. So, you still only get EAX and 2, no Advanced HD EAX 3 or 4.
And, the sound quality for music is superior with the official 252 Li've Uni-Pack setup. Unless you like overwhelming, booming bass and the midrange missing sounds. Those updated Audigy 2 and up drivers may have settings and files for the Li've, but they are tuned for the Audigy 2 and up.
The 3 best optimizations made for the Li've were the old Li'veware 3.0 vxd drivers, the APS mod for the Li've (both for 9x), and the kXProject drivers (for XP). By far the most problem free software package was the Li've Uni-Pack. And it sounds okay.
So there you go. Now, if after you uninstall whatever you've got, the setup file of the package you select doesn't say "No SoundBlaster hardware installed" you'll be lucky. Modern Creative drivers oftentimes remove something when uninstalled that messes up the hardware detection and if installing with CTZAPP doesn't magically let the software setup recognize the card again then only a format will fix it.

Creative Media Source Prob

Whenever I transfer albume to and from my Zen V Plus, Media source insists on adding the album title to the song name. This makes very long titles which can't be easily read in the Zen V. I have tried a number of transfers, and media source always appends album names to song titles. Is there a way around this, or is this Creative Media Source bug. It's a real pain to have to edit every title on every transfer. Thanks for any clues.My Zen V firmware and Media Source software are up to date.

Which mediasource did you download? I believe you have downloaded the mediasource installation mean for their MP3 player and that's why you cannot install. Their sound card mediasource don't have any standalone installation as far as I know. If you need, you will need to install the mediasource from your installation CD. If you don't have the installation CD, you can download the ISO CD image here.
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=8433

The launch feature of Creative Media Source 5.

I need to clarify my question. I was able to install components of the latest version of Creative Media Source 5 from the WEB. All but the Go! feature seem to work OK!? Am I missing something or am I doing something wrong? I hilight that section in the menue bar but nothing happens. Can anyone help me with this issue?

Cheese32 wrote:
Yes I realize that--I'm thinking more specifically that CMS5 doesn't play well with SP3? The problem with your solution is that I don't like WMP. At least, I don't like the fact that you can't play your music straight from your device. You have to sync your device and copy all of your music onto your hard dri've to play from the device connected to the computer. That was mainly what I used CMS5 for--playing music directly from my device through the computer?without having to copy all of its contents onto my hard dri've. I keep my music stored on my Zen Microphoto so it doesn't take up space on my computer...
I would Google the errors & see what comes up.. I'm fairly certain that Sp3 probably included WMP with it so that may be the source of the conflict if you installed it. Since it was a reinstall I don't know if you'll be able to install WMP0 instead.You could try that & see if that hel
ps.
If you don't have backup copies of your music(cd or external dri've)you should do so. If the player's hardri've ever fails for whatever reason at least you will have an archi've & not lose all your files.

Creative Media Source Probl

Hi, i figured this should go in here.
Everytime i try to run creative media source i get the "Creative MediaSource Player has encountered a problem and needs to close. We are sorry for the inconvenience." error message and it just wont open. The error i get says it has something to do with the file "C:\DOCUME~\BARRYT~\LOCALS~\Temp\WER687.tmp.dir00\ appcompat.txt" but i am sceptical as to how much this file actually has to do with anything. I was just wondering if anyone has any ideas as how to fix this.
Also if it is unfixable, is there anyway to back up my music library so i can reinstall creative media course without having to re-add all my MP3's (i keep them on various locations on my PC you see, i also fear if i reinstall, ill have to tag all my files via mediasource again)
Any help would be greatly appreciated.

Delete every files and folders under "C:\Documents and Settings\YourName\Application Data\Creative\MediaSource" and try launching MediaSource again.

Creative Media Source problem with removable hardd

Hi,
I have my mp3 files stored on a external harddisk, using the following folder structure:
f:\mein musik\artist\ album\*.mp3. The problem I have is that the Creative Media Source program keeps forgetting that my "mein musik" folder contains the mp3 files that I'd imported before in my "PC Music Library". Just for info: I "told" Media Source to keep the PC Library in folder f:\mein musik.
Every time I restart my PC, the PC Music Library shows no mp3 tracks at all, even though my external harddisk is connected. This is of course extremely annoying because it takes many minutes before my +/- 3000 mp3 tracks are imported again.
What could be he cause of this problem and how could I overcome this? Would I need to use for my PC Library a folder that is located on my "normal" internal harddisk?
Many thanks in advance for your help,
Tom

I believe the Media Sniffer feature of your MediaSource is enabled to sniff your external hard disk folders. Try disabling the sniffing of your external hard disk.

Creative Media Source won't install

I just bought a Zen Microphoto and I was anxious to upload my songs on the forementioned player. However as I tried to install Creative MediaSource which I downloaded from this very site, I encountered a strange problem.
I clicked on the setup and my PC proceeded to extract the files, and when the setup screen loads up, there's a message saying "Looking for previously installed components" and there are two setup screens minimized to my taskbar (CMS web installer and Creative Media Source - Install Shield Wizard) Whenever I click either of them nothing will happen. I'm pretty confused about this.
I'm sure it's not my hardware because my PC is up to date and I never had problems of the likes. I browsed the forums for an answer and I've heard of a software conflict with quicktime, I followed the advices with no results. I'm pretty desperate right now and I can't wait to use my Zen MicroPhoto. Did anyone encounter a problem similar to this?

Hi MusicoftheNight-
I had a similar issue when downloading the PlayForSure software for my Zen Touch. What I ended up doing was something I found in another thread. Download the installer, then use Winzip or Winrar and make an archi've of it. Unzip or Unrar it to another folder and then go into each folder and run the setup icons individually.
This is the only thing that worked for me.
When I needed to update just Mediasource I installed it in safe mode.
My computer is up to date and everything as well but this is the only thing that worked. Good luck!

Monitor point of Creative Media Sourc

I had Creative Media Source 2 before and when I transfer vinyl record using the cleanup feature, I was monitoring the sound after the cleanup process.
Therefore, I was able to compare the change in quality by listening to my Hi-Fi and my computer. Now, After upgrading to Media Source 5, my monitor point is now at the input line before the cleanup process. Anyone know how to change the software setting so I can monitor the audio after the cleanup before the actual recording is done?vinylrecord

Ok.... I tried many times to put the PlaysForSure "firmware" on my actual player (I have version .0.03). The problem is I can not figure out how to actually put the firmware onto my MP3 player. Can someone please help me with this as I am leaving for Iraq VERY soon and I need to get the MP3 player to be recognized by Creative 5 and Windows Vista (32-bit). Thanks in advance.
BrianY wrote:
If you're new laptop is a Vista system, you won't have to load any software drivers for the Touch, but you'll have to update your Touch to PlaysForSure firmware since Creative doesn't do Vista drivers for the MP3 players. If your laptop is an XP system, and you're on V.x firmware, you'll need to load the drivers so that MediaSource can recognize the Touch.
lemondrop wrote:
My question is since now I have Creative Media Source 5 (along with Creative Li've! Cam and Sound Blaster Audigy) do I even need to load the Creative Zen Touch software on my new laptop inorder to transfer music files from my MP3 player and my laptop. Thank you in advance.

Creative Zen and Creative Media Sourc

A couple of years back I bought a creative MP3 player and it came with Creative Zen Touch software. Just recently I purchaed a new laptop that came with Creative Media Source 5. I used to use the Creative Zen Touch to load my music cds and transfer files from my computer and my MP3 player. My question is since now I have Creative Media Source 5 (along with Creative Li've! Cam and Sound Blaster Audigy) do I even need to load the Creative Zen Touch software on my new laptop inorder to transfer music files from my MP3 player and my laptop. Thank you in advance.

Ok.... I tried many times to put the PlaysForSure "firmware" on my actual player (I have version .0.03). The problem is I can not figure out how to actually put the firmware onto my MP3 player. Can someone please help me with this as I am leaving for Iraq VERY soon and I need to get the MP3 player to be recognized by Creative 5 and Windows Vista (32-bit). Thanks in advance.
BrianY wrote:
If you're new laptop is a Vista system, you won't have to load any software drivers for the Touch, but you'll have to update your Touch to PlaysForSure firmware since Creative doesn't do Vista drivers for the MP3 players. If your laptop is an XP system, and you're on V.x firmware, you'll need to load the drivers so that MediaSource can recognize the Touch.
lemondrop wrote:
My question is since now I have Creative Media Source 5 (along with Creative Li've! Cam and Sound Blaster Audigy) do I even need to load the Creative Zen Touch software on my new laptop inorder to transfer music files from my MP3 player and my laptop. Thank you in advance.

How to play MPEG4 music files using Creative Media Source

I use iTunes store for buying music pretty much and receive files in MPEG4 format.
Instead of converting to MP3 I would prefer that my Creative Media Source player/organiser could handle the MPEG4 format. I'm using the Media Source player with an Audigy2ZS and sometimed the older Soundblaster-USB for notebooks.
Is there an upgrade that I have overlooked or ...
Or shall I buy a more professional player, like BMP studio?
I don't like the iTunes player very well!
/Peter

I use iTunes store for buying music pretty much and receive files in MPEG4 format.
Instead of converting to MP3 I would prefer that my Creative Media Source player/organiser could handle the MPEG4 format. I'm using the Media Source player with an Audigy2ZS and sometimed the older Soundblaster-USB for notebooks.
Is there an upgrade that I have overlooked or ...
Or shall I buy a more professional player, like BMP studio?
I don't like the iTunes player very well!
/Peter

What is better creative media source or Windows media player?

Hey I just bought a new Zen player, and I noticed while ripping and uploading songs that the album art does not come along with it if I'm using the creative media source software. Now if I use my windows media player that came with my vista computer I do get the album art. So now my question is if Creative media source can't even do this simple task what is the benefit of using creative's media source? Are there things that it can do that windows media player can't do? Which is a better product to use? :smileyindifferent:angry:

tapdiggity wrote:
And I guess another benefit to creative mediasource is converting video files for playback on the zen. Windows media player I don't think has a converter for video files for the zen.
That is part of the Creative Media Explorer not MediaSource. The Video Converter is slooow & not that great. I do use the Media Explorer it is better for making & editing playlists.

Creative Media Source Player not fo

Hi... I am lost & confused!!!! I purchased a new hard dri've & motherboard. I reinstalled my audigy 2zs card & loaded the install disk. To my suprise media player did not load...in fact I can't even find it on the original install disk!! I used the media player all the time and even plugged in my old hard dri've and behold..media player was on that hard dri've!! Can anybody tell me why it is not appearing on the original install disk whenin fact it was there when I loaded it the first time I purchased the card? It appears everything else will load off the install disk EXCEPT media source player.

There are differences in the details of how the various Creative soundcards work, and it would help me if I knew which one you have. I get the impression it came in the computer, and you don't actually know the answer. Where exactly are you trying to select what u hear? The Creative Media Source Player program (I've not used it, but it seems odd for a "player" program to do recording)? The mixer program? Which mixer, Windows or Creative's?
-Dave
[email protected]

Creative Media Source 5 Install Problems

(Creative Media Source 5 Install ProblemsM I've looked through some of the other install issues and can't seem to find my problem, but apologize if this is somewhere I did not find... I had installed and have been running CMS5 on my desktop for a while. Recently I had to reformat my hard dri've and reinstall Windows from scratch. Upon trying to install CMS5 on my Windows XP SP3 system, I got a bunch of errors basically saying something to the effect of "Installation is unable to continue because of one or more unresolved issues....."? Then it lists a file TagMgru.mft. After cancelling that error, they continue to come up for Id3Tagu.mft, WmaTagu.mft, OggTagu.mft, Mp4Tagu.mft. The error message comes up twice for each of the listed files, and then the installation does not complete. Any ideas? I was using an install file downloaded from Creative's [email protected]

Cheese32 wrote:
Yes I realize that--I'm thinking more specifically that CMS5 doesn't play well with SP3? The problem with your solution is that I don't like WMP. At least, I don't like the fact that you can't play your music straight from your device. You have to sync your device and copy all of your music onto your hard dri've to play from the device connected to the computer. That was mainly what I used CMS5 for--playing music directly from my device through the computer?without having to copy all of its contents onto my hard dri've. I keep my music stored on my Zen Microphoto so it doesn't take up space on my computer...
I would Google the errors & see what comes up.. I'm fairly certain that Sp3 probably included WMP with it so that may be the source of the conflict if you installed it. Since it was a reinstall I don't know if you'll be able to install WMP0 instead.You could try that & see if that hel
ps.
If you don't have backup copies of your music(cd or external dri've)you should do so. If the player's hardri've ever fails for whatever reason at least you will have an archi've & not lose all your files.

Jet Engine 4 needed for Creative Media Source Corrupt Libr

Similar Messages

Maybe you are looking for