Jetpack 4G MHS will not connect to Kodak Hero wirelessly

I have tried to conned my Kodak Hero with wifi to my Jetpack using the Search option on Kodak and entering string.  Jetpack does not connect but printer says it is found but not connected.  I also tired WRS to no avail.
I connected the prineter to a CLEAR device at another home no problem.  Is there some settings on the Jetpack that have to change to get the Kodak Hero to connect.  I also have a Kodak EPS7250 that also has same issue.  I am at my wits end.  I am fairly good at computers so this is weird.
Should I change a Jet pack setting or what.  Please any help would be super.

As we have learned from other threads, the 890L cannot change its IP address.  That means that any device that connects to it must have an IP address of 192.168.1.x.  From the info you posted your Kodak printer is definitly not on the correct network because it is reporting a 192.168.15.x IP address.
My first suggestion would be to try re-entering your wireless password and network name (SSID) into the wireless printer.  There should be some kind of wireless setup wizard on your printer that will allow you to do this.  Some printers are extra picky and like to know the encryption type when you setup a wireless connection.  Your choices are either AES or TKIP, so try them both out and see if you can establish the connection.
If you are absolutely sure you have entered the correct wireless password into the printer then the next step would be to try changing the Network Mode from BGN down to BG.  From there you could also experiment with the password type such as lowering it from WPA2 down to WPA or WEP. 
See page 22 of the 890L User Guide for more information on basic WiFi settings:
http://www.zteusa.com/support/um/201205/P020120524834954274011.pdf
See page 24 of the 890L User Guide for more information on WiFi passwords:
http://www.zteusa.com/support/um/201205/P020120524834954274011.pdf

Similar Messages

  • My Satellite A25-S279 (WinXP) will not connect to the internet wirelessly since UVerse was installed

    My Satellite A25-S279 (WinXP) will not connect to the internet wirelessly since UVerse was installed. (Rather, I should say
    it 'connects', then immediately disconnects.) When I had regular DSL, there was no problem, but since UVerse installation,
    I can connect ONLY with the ethernet cable.
    Thinking it was my 'old' computer, I took it to the local computer place---they were able to connect instantly (wirelessly) AND maintain connection. Sooo...I've told this to ATT, & had 2 different techs out here, both of whom were very patient & tried EVERYTHING they could think of,  & both of whom failed to fix the problem. They maintain that it is NOT the fault of the modem/router, but is some 'miscommunication' between my laptop & the modem/router.
    Is that possible? Is there a setting I need to change on the laptop? If it worked BEFORE UVerse, and if it STILL works at the Computer store, and if it works WITH the cable, why won't it connect wirelessly?
    Thank you SO much for any thoughts!

    It is possible. While it's not common, sometimes you could have a working router and a working wireless card in a laptop, but they just don't communicate. It sounds like that might be the problem unfortunately.
    - Peter

  • HT1695 My iPhone 5 will not connect to my home wireless connection.  My ipad works fine.  Now the forget this network and renew lease buttons are gone.  I have several things.  Now it won't even sync to iTunes.  Do I need to go to the apple store?

    Phone will not connect to wireless.  It's been giving me no service this week too.  The apple store is 45 minutes away and I really don't want to go.  Do I need to go there?

    Have you reset the phone by holding the home and off button down until the apple symbol comes up? Then if that doesnt work, you need to restore your phone in itunes first from your backup, then if still not, then fron as new.

  • HT4993 iPhone 6 will not connect to Boston Acoustics wireless speakers

    I have this issue with my Boston Acoustics SoundWare XS Digital Cinema 2.1 system. Any other device can connect just fine including all of my previous iPhones and Android devices, but my new iPhone 6 will not keep the connection. Strange because the iPhone 6 will connect and work perfectly fine with my Plantronics Voyager Legend and my JBL Flip bluetooth. Anyone esle having a similar issue? I spoke to Boston and they say it is a known issue with IOS 8.

    There ware some issues with iOS 8, 8.0.1, and 8.0.2, regarding bluetooth. Have you updated to 8.1? Forget the speaker in bluetooth settings, and update. If you are up to 8.1, try to forget the speaker, and reset all settings and attempt to pair again.

  • Deskjet 3050 will not connect via wps or wireless

    We recently changed to century link and the wireless printer does not connect to the internet. I deleted and tried reinstalling the software but with Mac OS X Maverick it doesn't show any or recognize it. The printer works connect through USB. In the HP Network configuration it says netwrok status offline active connection type none under 802.11 wireless status is disconnected everything else says enabled  and my netwrok was discoved with the SSID at page bottom. I called centurylink and they are confident their settings are correct.

    Hi gchart57,
    Your model printer connects to a network with the aid of the HP software, either for Windows or Mac.  The driver provided through Apple for OS X 10.9 does not have the ability to connect the printer to the network.  It must already be connected.
    WPS is normally a valid way to connect, but you might have to reset the wireless on the printer to get that to work.  This
    Another method is to use a computer running Windows or an older version of OS X to connect the printer to the network and then Mavericks can see it.
    I was an HP employee.
    Please mark the post that solves your problem as "Accepted Solution"

  • Airport will not connect to my preferred wireless network

    Hi,
    I set up a wireless network in my house. My mac connected has connected to it before, but when i had to restart my computer I can no longer connect to it again.
    I have added it under my preferred networks and it is top of the priority list.
    Every time i try to reconnect it, my comp tells me "connection timedout", therefore not letting me reconnect to it. My router etc appears to be working properly as i can connect via ethernet.
    I have tried deleting the preferred network and re-adding it, and rebooting my computer. Nothing seems to be working.
    Someone who know about computers please help i have work that needs to be done!
    Thanks!

    Thanks, but it didn't work.
    My mac remembers it, but doesn't remember the settings (ie on the preferred list). It tells me that none of my preferred networks are available, even though my network is still in the preferred list.
    So i click on my network when it tells me that none of them are available and re-enter my password and it always says connection timeout.
    It was working perfectly earlier on today, like i said when i restarted my computer, it automatically connected to another network and i haven't been able to get on to mine since!

  • Officejet 4630 will not connect to computer through wireless or usb since installing Windows 10

    I have tried to install updated software for said printer but it still refuses to connect to my pc through either of the two mediums provided. Bit unstuck due to this as it is my work computer. Admittedly should have waited a while to install windows 10 but I got a bit caught up in the moment and didn't consider that issues such as this may arise. I also have a HP designjet T120 connected to this PC and that still works wirelessly no problem at all!

    HELP

  • K210 will not connect to secured network

    My Lenovo K210 system running Vista will not connect to a secured wireless network.  I added a Tenda, and Netgear USB wifi stick as well as a Rosewell PCI card (removing each before proceeding to the next element.).  It will see the secured network, and will allow for input of the PSK key, but it will not connect saying "Windows cannot connec tto <SSID>" with "Diagnose the problem" or "connect to another network".  Diagnose the problem results the same.  I end up connecting to an unsecured router I have set up on an old broadband connection.  The PCI adapter will handle WEP, WPA and WPA2.
    Is there something that could be changed to allow for connection to a secured network?
    Thank you,
    WIlliam

    It sees the network, there is no error message just showing the circular emblem and not the check next to the network.  I do not know about other networks since I am at home and just started this morning.  I can connect to my MacBook Pro with Bluetooth.

  • IPhone will not connect to home wifi network

    My iPhone 4s will not connect to my home wireless router. I have 2 other iPhones and an iPad which are connected fine. Help!!

    Ilindafrommilford,
    You might want to re-post your question in the iPhone subforum. By accident, you ended up in the iPhone forum.
    Good luck finding your router!

  • Remote app on my iphone 5 will not connect to itunes

    The remote app stopped working on my iphone 5 and will not connect to itunes. Home sharing is on on itunes and adding new library on my remote iphone app results in veryfying passcode results in the following message on itunes 'the pascode you have entered is incorrect'. I have the feeling that the library is already added but will not connect. Any suggestions are deeply appreciated!

    I had the same problem. Reinstalled everything and still nothing. Came across this article:
    5 Simple Tricks to Get iTunes to Recognize an iOS Device
    Quit and relaunch iTunes
    Connect the iOS device to a different USB port on the computer
    Reboot the iPhone, iPad, or iPod
    Reboot the computer
    Use a different syncing cable (if possible)
    I changed my syncing cable and it worked! Try that if all else is failing.

  • My Deskjet 3050 J610 will not connect to my Virgin WiFi router for use with Apple Mac laptop.

    I live in the UK and have Broadband access via a Virgin connection and WiFi router. My Apple MacBook laptop connects to the WiFi with no difficulties. However I have an HP Deskjet 3050 J610 printer which will not connect to the router. When I try to connect, the blue light just keeps on flashing but a connection is not found. Consequently my MacBook cannot "see" the printer on the network. Any suggestions? Thanks!

    See if this helps.
    Printer does not maintain wireless connection. 
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02817031&tmp_task=solveCategory&cc=us&dlc=en&la...
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • My hp c4599 printer will not connect to my wireless network

    My hp c4599 printer will not connect to my wireless network or show up on my computer during the installation even though it is usb connected. But it managed to create its own network where i can print wirelessly by selecting it sort of like bluetooth… I have installed different softwares from the hp website and looked at so many different forums but i cant find the answer. I have reset the printer and wireless network and god knows whatelse. I can also print fine through the usb cable, it just will not connect to my wireless network. I am going crazy P.S. once upon a time it was connected to my wireless network but i cant remember what happened. 
    So can someone please help and please dont be too technical

    Hi ..
    Try these support articles  ..
    OS X: Connecting a Wi-Fi printer to your Wi-Fi network
    Mac Basics: Printing in OS X

  • HP C4740 will not connect wirelessly to HP desktop

    I have an old HP desktop (prob Pavillion) running Win XP Pro w/ SP 3.  I have 2 MB RAM.  I purchased an HP C4740 AIO printer about 6 months ago.  At first it hooked up fine and performed very well in wireless mode.  Then when replacing an ink cartridge one of the retainer tabs broke.  Long story short I had to replace the unit.  HP gladly did so and I got a brand new one. 
    When I got the new one I hooked it up and installed the software exactly per the instructions for use as a wireless printer.  Unfortunately, no matter what I do it will not connect to my wireless network.  The only way to use this printer is via USB cable.  Two things happen that I find interesting:  it does not recognize the printer (even thought it's connected by USB cable) and it doesn't recognize my wireless network (even though it does recognize another unknown network).  Even when I try to manually enter my network SSID and Passphrase it will not recognize it.  I have also tried unsecuring the network but still no success.
    The network is secured but I have the SSID and passphrase information.  For reference, I have a Dell laptop and Lexmark printer that connect without issue.  My iPhone 4 connects without issue.  This C4740 will not.  I have uninstalled the software and even gone into the registery to locate and remove any entries associated with this printer.  Still nothing works in wireless mode.
    Need help.  I am by no means a computer expert, especially with networking.  I know enough to be dangerous but still make it through the day!  I'm ready to toss this and pay the much higher price for the much more usable Lexmark!  Only problem is I'm just cheap enough that I'm willing to try to make this printer work.
    Thanks!

    Hi,
    Download the latest installer software for your printer on the link below and save it to the Desktop.
    ftp://ftp.hp.com/pub/softlib/software11/COL28119/mp-71555-3/PS_AIO_06_C4700_USW_Full_Win_enu_140_175...
    Next download and install Revo Uninstaller from the link below.
    http://www.revouninstaller.com/download-freeware-version.php
    Disconnect your printer from your PC.
    Run revo and use it to uninstall your printer software.  Right click on the icon of the program you wish to remove and select Uninstall.  During the process you may be asked to delete registry entries, just select all and then click delete.  Do the same for any left over files and folders.  Once the uninstall has completed, reboot the PC.
    Temporarily disable any security software ( Antivirus and Antispyware )
    Now try running the software installer from your Desktop by double clicking the installer.  Do not connect the printer to the PC until the software asks ( Whether wired or wirelessly ).  If everything install Ok, remember to enable your security software.
    Hope this helps.
    Best wishes,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Apple TV (1st gen) will not connect to iTunes

    I am at wit's end. Until a couple of days ago, my 1st gen Apple TV connected fine to iTunes. Now, it will not connect no matter what. I have tried the following:
    1) restart both ATV and my machine (Win 7 running iTunes 10.7)
    2) restored ATV factory settings and reinstalled software
    3) hard-wire via ethernet to my computer (which some articles seemed to indicate should work - nothing happened)
    4) hard-wired both my cpu and ATV to a router - nothing shows up
    5) removed and reinstalled all Apple programs, including iTunes, QT and ancillary
    6) vaired between hard-wired internet connection and wireless for ATV
    7) did everything on this page, including open ports manually http://support.apple.com/kb/TS1453
    Most frustrating of all, my wife sees the device instantly in her iTunes. AGHH!

    Same thing happened to me, starting right after I  updated the Apple TV firmware. I restarted both devices to no avail. I can, however, play my itunes library content from the apple TV's "computer" app. So there must be some kind of connection. What I've lost is the ability to stream music from iTunes using AppleTV as an "airplay" device.

  • HT4623 please help - installed IOS7 and now I am having problems playing Words Free on my Iphone.  It gives me a pop up telling me to connect to ITunes but will not connect.  Cannot get out and have to continually shut down my phone and start over.

    please help - installed IOS7 and now I am having problems playing Words Free on my Iphone.  It gives me a pop up telling me to connect to ITunes but will not connect.  Cannot get out and have to continually shut down my phone and start over.

    Hi, jeantwin.
    Thank you for visiting Apple Support Communities.
    The steps in the article below may help you resolve the issue with push notifications.
    iPad and iPod touch: Unable to use YouTube or Push notifications
    http://support.apple.com/kb/ts3305
    If the issue persists, try signing out of your Apple ID and then sign back in.
    iOS: Changing the signed-in iTunes Store Apple ID account
    http://support.apple.com/kb/HT1311
    Cheers,
    Jason H.

Maybe you are looking for