JetSend does not work from HP9100C to P3015D

Hi Everyone,
I have Docu Centre HP9100C device, which has JetSend function. It works via JetDirect adaptors inserted into Scanner (HP9100C) and Printer. For HP8500 and HP4050 it worked pretty fine.
But when I purchased a printer P3015D, installed there JetDirect 600N adaptor, connected it to a network.
JetSend stopped functioning.
It simply can not find the printer. While network printing on P3015D works well.
I believe this is related to how P3015D is visible to HP9100C scanner.
Is there any gury from HP JetDirect team who can give me an advise what could be the problem?

Hi Srinivas,
Were you able to find out the solution for this.
We are using OID 11g and the user is not getting updated from OID to EBIz side however the user was able to sync from Ad to OID.
Please help
Thanks,
Vidya

Similar Messages

In 5s, personal hot spot does not work from time to time. Not detected

In 5s, personal hot spot does not work from time to time. Iphone does not get detected on Wi-fi or bluetooth. Restarting or rebooting does not help.

Settings, general, reset and reset network settings. Clear out your network settings and set personal hotspot again.
also avoid special characters making a password. hashtags or open brackets for example doesn't work too good.

Error: ELM does not work from UI

Hello guru´s,
hard to explain this briefly, but here it goes.
We´re trying to upload an ELM from UI, and it doesn´t work. But the thing is, if you just SAVE from UI (not launch), and then you go to CRMD_MKTLIST and you flag required fields, it works. But obviously, we need to do that from UI.
Besides this, we´ve implemented a Badi CRM_MKTLIST_BADI for a specific format but it´s never called from UI; however, if we simulate the execution from SAP GUI, this BADI works correctly.
Thanks in advance.

SunSudio Express (December 2006 release) introduces some
interesting new features, but there are still problems. For the first time,
I was able to debug Fortran 90 applications in Linux, but debugging is
still very limited. This is good to know that you were able to debug a f90 application
on Linux. What problems do you see? Please, report them, and we
will file them as bugs or RFEs (requests for enhancements).
Furthermore, the Fortran error parser does not work, even when
compiling using Sun's f95 compiler. Yes, you are right, this feature does not work yet.
This is a heavy disadvantage. I assume that Fortran error parsing
is not supported on Linux, although the tutorials don't make this
point clear: Yes, it does not work yet on all platforms.
In the Options window, there are settings concerning C/C++ (and
its parser), but there are no similar options for the Fortran parser,
even in "Advanced Settings" (which are similar to the old Options
window). There will be similar options for Fortran.
My Linux system is Debian 3.1 (Sarge), with JDK 1.5.0.09.JDK 1.5.0.09 is ok.
We do not target Debian system, but we assume everything
should work there (we test on Red Hat and SUSE).
Good to know that our assumption is correct :-)
I don't think that I'm doing something wrong, but I want to ask, just
to be sure: has someone had seen the Fortran error parser working
on Linux? No. It does not work on Linux, and it does not work on other platforms.
What about Fortran word completion? No, this feature is not implemented yet.
Thanks you for trying Sun Studio 12 Express release and for your report.
Nik

Magic mouse forward backward swiping does not work from time to time

Hello...
from time to time the forward/backward swiping functionality of my magic mouse does not work (The scrolling works though). Disconnecting and reconnecting does not do the trick. So I guess it might be a software problem. Restarting the iMac does not always help at once. After a couple of times it will work though again.
Can anyone help?
Regards
Bjoern

your answer should be here.
http://discussions.apple.com/thread.jspa?threadID=2211072&start=0&tstart=0

Icloud log in with Apple id does not work from my mac when i try to run on photo stream

When I try to active photostream or sharing via icloud it does not work I get an errormessage that there is communication problems with icloud. I cant get around to administrate the stream from the Icloud site or via my imac directly. It has never worked!

yes, the apple id works for everyting else, but not for icloud. on my phone and ipad it is set up with the correct apple id and password. however, when i try to log on to icloud under system by clicking the icon the erromessag that i get is unknown apple id or password.

Automatic text comparison does not work from child to Master in CUA

Hi,
When trying to transfer role specifications to CUA master from our child system the application log is displaying as seen in slg1.png.
On our master system we are running 7.31 SP7 which is fine according to Note 1642106.
Our client system is 7.31 sp5 and there for we went to note 1141736 and installed note 1580217 as the other three notes is not compatible with our system.
we have also implemented the switch "CUA_AUTO_TXTCMP_ROLE" with YES in table USR_CUST on both systems.
The "error" does not go away and the "synchronization" does not seem to be activated between the systems.

Hi,
This is a list of many Routing Modems and routers
http://portforward.com/routers.htm
AS you will see the Netgear section is quite long.
Of those that are Wireless most will be G type devices.
I am not saying DO the Port Forwarding.
If you click on your Model and then Dismiss the Advert in the next page > Then Choose iChat in the Next List you will be told the Default Access info
Most likely this will be 192.168.0.1 and admin and password as the Default Info.
Once in the Set up pages you need to Check the menu on the left for UPnP and make sure it is Enabled (No Need for Port Forwarding then).
In the WAN Page you need to Disable DOS (Or SPI) and Allow Response to Internet Pings on the WAN port.
The 4500 was a typo, sorry about that. Should have read 500kbps
On Adding Buddies.
Apple Names (@Mac.com and @me.com) and AIM ones need to be added to an AIM Buddy list.
By that I mean one that Logs into AIM.
If you have a @mac.com name then you should have selected the @mac.com option when choosing the Account type.
See the Drop down item in the middle of this Start Up Screen
From http://www.ralphjohns.co.uk/versions/ichatvers4/howtoStartiChat.html
Similarly you need to chose the account type the Buddy is as well.
More info with pics
So adding the Apple Test accounts requires that you type the same info as the iChat Software adds the @mac.com when you chose to add an @mac.com Buddy
Sample of middle Drop down in Add Buddy but set to @me.com instead
If you have a Jabber ID (And GoogleMail names work as GoogleTalk IDs and they are Jabber as well) you can add Jabber Buddies as well.
There is a way with some Jabber Servers to Add the ability to Text chat to MSN and Yahoo Buddies.
7:51 PM Monday; May 11, 2009
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Swf file does not work from InDesign

I am not sure if this is a Flash or InDesign question, so i will post on both..
I am trying to embed an “animated” swf file (that was created in flash) into an InDesign layout and then export the InDesign layout to swf. in the resulting html file my navigation works ok but the swf file does not play “animate” when viewed in html or flash. It only shows up as a graphic.
I have tried exporting the ID file to xfl and bringing it into flash but then none of my animation works. What am I doing wrong?
any help would be appreciated.
thanks
mattG

You´re doing nothing wrong. SWF export of InDesign CS4 doesn´t support any media files. You can place videos, sounds and animations into indesign layout, but if you export to SWF, they won´t work in resulting SWF. They work in interactive PDF.
And you can export your basic layout to Flash CS4 by using XFL export and import those media elements in Flash, but that may be quite a job. I have been strugled a lot with that method. My files used to go really messy when I open them in Flash.

Links to discussion in a discussion board does not work from a Custom View

Hi,
I need to limit the number of Items shown in a discussion board the the 3 latest discussions.
The solution to do this is to created a new few where I set the item limit.
.. or so I thought.
The view shows only the 3 newest items however the link to the discussions are not working. If I change the view back to the normal "Subject/AllItems.aspx" view it works fine.
Anyone has a solution for this? hovering over the title link with the mouse I can verify that the links are different.
With the standard subject view where it works:
Home.aspx?RootFolder=%2Fsites%2Ftestsite%2FLists%2Ftest%20discussion%20board%2Ftest%203%202820&FolderCTID=0x012002000DF957D933C11F498845E0406B80727A&View=%7BF54786F4%2D10EB%2D4DB1%2DA686%2D7743DD17635A%7D
With my custom view where nothing happens when I click the link:
Home.aspx?RootFolder=&FolderCTID=&View=%7BF54786F4%2D10EB%2D4DB1%2DA686%2D7743DD17635A%7D
Thank you

check this post
http://social.technet.microsoft.com/Forums/sharepoint/en-US/9fc02732-3124-4c41-b7ce-ae26f6c3c00d/how-to-limit-the-discussion-board-webpart-to-show-only-10-discussions?forum=sharepointgenerallegacy
Another article
http://technet.microsoft.com/en-us/library/cc768269.aspx

Graph wizard does not work from report builder

Hi,
I am again an agian posting the same question because still i am unable to run a graph wizard from my reports builder. When i run this i get a program error "rwbld60.exe has generated an error ...." This shuts down the entire report builder and i need to restart my report builder.
I have reports 6i on win 2000 with SP2.
Also i applied 6i latest patch 4.
I can see dr. watson log generated.
my machine virtual memory is 893756.
I am really getting a hard time with this.
Thanks in adv.,
shailesh

Thanks guys for all your support.
I have this working now. I did a
fresh install for oracle reports and it worked for me.
For sure its working now i can't gurantee
in future. I will conclude this after testing this for couple of days.
Anyway thanks once agian,
shailesh
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Niranjan Ramakrishnan:
I would strongly suggest that the reports development team's idea to contact Support on this is a flawed one. I had very similar issues with my reports builder except that the Dr. Watson happened every where (even while just invoking reports builder) - opening the layout editor when graphics were involved, running the report, using the chart wizard, etc.
I opened a TAR on this with Support. Their response? We can't reproduce it on our computer so bad luck and good bye.
All I ask is that the reports team give us something to be able to provide some kind of function call trace information when the Dr. Watson does occur.
I use patchset 5a. Also, btw, I tried to run a report with graphics on Solaris from the builder and guess what? It core-dumped. Any way to send you guys trace files from there atleast?
Calling support is not an acceptable solution.
Thanks,
- NR
<HR></BLOCKQUOTE>
null

Media Query does not work from GoDaddy redirect?

Website is set up and all looks good, except when the page is loaded from the redirect host name setup in Godaddy, the mobile media queries don't work. I'm not sure why?? The page loads ok, but will not apply the phone.css on a mobile device. However, if I use the local host url all works great. Thank you if you have any recommendations!

Thank you again for taking time to look at this. I failed to mention I had adjusted the media query to 360px. Although, both urls above call up the same web page it seems the first url is wrapping the source into a frame.
Source code from Firefox:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN"
"http://www.w3.org/TR/html4/strict.dtd">
<html>
<head>
<title>O'Krent </title>
</head>
<frameset rows="100%,*" border="0">
<frame src="http://www.accu-print.org/okrentgolf" frameborder="0" />
<frame frameborder="0" noresize />
</frameset>



</html>

Workflow does not work from Script Menu or as Application

Hi,
I create a really simple script to adjust podcast volume...
1. Get Specified iTunes Items (Recently added podcast – my smart folders of recently downloaded items)
2. Filter Songs in iTunes (Volume Adjustment is 0: so the workflow will not touch podcasts already adjusted.)
3. Set Options of iTunes Songs (Volume Adjustment: 80)
The workflow works find when running from Automator. But when I save it as script plug-in or application and try to run it, nothing happens. Please help. Thanks.
P.S. I tried to create folder action script that adjust the volume automatically when a podcast is downloaded (get selected items -> set options in iTunes songs). At first it works. Now it doesn't.

It starts by pausing iTunes, executes a applescript where there are say commands, pauses for 3 seconds, gets info from ical, filters out todays events, speaks these events out loud, fetches a weather report via web(xml), speaks out loud, pauses a couple of seconds, gets current itunes song, resumes playing of this song and the workflow is finished.
It quits right before it is about to announce todays events. Doesnt matter if there are events for today or not. If I start the application manually however, everything seems fine.
The Applescript used to launch the program:
tell application "TodaysiCal"
run
end tell
Any suggestions now ?

Removal does not work from task bar, how can I get it to work?

I have the latest version of firefox. clicking on the star and then remove does nothing.

'''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
''(If you're not using it, switch to the Default theme.)''
* You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Don't select anything right now, just use "'Start in Safe Mode"''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
'''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
Please follow the [[Troubleshooting extensions and themes]] article for that.
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

Why this WLST script does not work from ant a task

Hi,
          The following is my lovely WLST script to disable managed server hostname verification in a cluster environment.
          It works perfect if I run it from the OS command line,
          java -cp $WL_HOME/server/lib/weblogic.jar sslSetting.py weblogic weblogic t3://localhost:7001
          But if I run it from ant task, it never works. Nothing happens, not even any messages. Any idea?
          ------ sslSetting.py -----------
          # Disable HostnameVerification on managed servers
          # This is a ONLINE script. The admin server must be running
          # @param $1 BEA_USER_NAME
          # @param $2 BEA_USER_PWD
          # @param $3 admin server URL
          if (len(sys.argv) != 4):
          print "usage: " + sys.argv[0] + " domain-home "
          sys.exit()
          beaUserName=sys.argv[1]
          beaUserPwd=sys.argv[2]
          adminServerUrl=sys.argv[3]
          def handleServer(server):
          SSLPath="/Servers/" + server.getName() + "/SSL/" + server.getName()
          print("handleServer(1): " + SSLPath)
          try:
          cd (SSLPath)
          print("handleServer(2): " + SSLPath)
          set("HostnameVerificationIgnored", "true")
          except Exception, inst:
          dumpStack()
          print ("FAILED handleServer(): " + SSLPath)
          else:
          print ("DONE handleServer(): " + SSLPath)
          #===============================================================================
          # Main
          #===============================================================================
          try:
          connect(beaUserName, beaUserPwd, adminServerUrl)
          edit()
          startEdit()
          adminServerName=cmo.getAdminServerName()
          for server in cmo.getServers():
          if adminServerName != server.getName():
          handleServer(server)
          save()
          activate()
          except Exception:
          dumpStack()
          else:
          print ("=== DONE ===")

OK, when I run the WLST script from command java, I only need the weblogic.jar in the classpath. But I'll need a couple other jar file for it to work inside an ant target, as showing below.
          <target name="run-wlst">
          <java classname="weblogic.WLST" fork="true">
          <classpath>
          <pathelement path="${props.JAVA_HOME}/lib/tools.jar"/>
          <pathelement path="${props.WL_HOME}/server/lib/weblogic_sp.jar"/>
          <pathelement path="${props.WL_HOME}/server/lib/weblogic.jar"/>
          <pathelement path="${props.WL_HOME}/server/lib/webservices.jar"/>
          </classpath>
          <sysproperty key="weblogic.Home" value="${props.WL_HOME}" />
          <arg line="sslSetting.py weblogic weblogic t3://localhost:7001"/>
          </java>
          </target>

Networked L7680 does not work from more than one computer at a time.

Have installed latest driver software on both computers. Printer will only work with one computer on at a time. When I run windows device trouble shooter from the last computer turned on it says printer is off. It works ok from the first computer turned on.
Any help is appreciated.

Networked how?? Please explain how everything is connected and model number of equipment.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Sound does not work from speakers

I have Windows 7 on a HP 500B MT product desktop computer. According to my computer, my sound works fine. I installed the Microsoft Fixit and it said nothing wrong. I can plug in earphones and I can hear system sounds but no other sounds. The other speakers will sometimes either have too much static where I have to turn the volume down and the sound works OR I have absolutely no static and no sound. This is an intermittent problem. The volume is on max, device manager shows RealTek with no exclamation points by it and the driver is up to date. Then there are other days the sound works. What else could be wrong? Why is this an intermittent problem? I never turn my computer off. I always have updates installing. Any ideas anybody?
This question was solved.
View Solution.

Did you try uninstalling the drivers from device manager? It could just be a driver issue.
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical.

JetSend does not work from HP9100C to P3015D

Similar Messages

Maybe you are looking for