JFIF Error when moving from iPhoto 06 to 08

When I switched from iPhoto 06 to 08, most of my photos made it across just fine. A very small number (about 20 of them) all of a sudden have a year of 2028 now (instead of 2008).
I would like to use a JFIF editor to change the year back to 2008 - does anyone have any suggestions? I haven't found a way to do this within iPhoto.
Thanks!

Interesting. I just went to the depths of the iPhoto library and looked at the photo files. The files themselves are dated correctly, they are stored, however, in folders "2028"-->"10.02_2.2028" (for example).
I don't know if the JFIF info is incorrect, or if I merely need to rename the folders. I don't want to try renaming without someone who knows about this stuff confirming that this will work - who knows what metainfo iPhoto stores aside of the folder names...

Similar Messages

Restoring keywords that were deleted when moving from iPhoto to Aperture

I recently migrated from iPhoto to Aperture, and this apparently involves losing a TON of metadata. One new discovery I've made is that for my older photos (i.e., ones added and edited a few years ago when I was using an earlier version of iPhoto), the keywords have been deleted.
More specifically, if I have a photo and it has keyword X, then TWO copies appear in the Aperture library:
- the original image, with the keyword "iPhoto original" AND the keyword X
- the modified image, with only the keyword "iPhoto external edited"
(Note that I have not used any external editors; this is just how iPhoto seems to interpret images that were edited with older versions of iPhoto)
This is definitely buggy behavior.
This means that if I have a "best-of" keyword and I make a "Smart" album, it gets filled with original, unedited versions of my "best of" photos.
Is there any way to fix this without going one-by-one through THOUSANDS of older photos and manually copying the keywords from the original to the modified?
Thanks,
Mike

Hope we get an answer - I'm in the same situation as you, though I just went from iPhoto to A2.x on an older G5 tower. I've been debating whether to take the time to go through them, reorganize "better" than they were under iPhoto or wait for a more elegant solution...
KWO

Compilation error, When moving from 32-bit to 64-bit code

Hello,
I m getting Compilation error, This program already compiled on 32 bit, but getting compilation error on 64 bit.
CC -V
CC: Sun C++ 5.9 SunOS_sparc Patch 124863-01 2007/07/25
make
Making dependencies...
cc -g -D__EXTENSIONS__ -D_SVID_GETTOD -I../h -I/app/oracle/product/9.2_32/precomp/public -I. -xcg92 `getconf LFS_CFLAGS | head -1` -D UT_TRACE_FUNCTION -Dbool=int -g -D -I. -m64 -xarch=sparcvis -H -w -E 2>&1 >/dev/null Bitmap.cc BitmapData.cc BitmapInputTxnStream.cc BitmapOutputStream.cc UnexpectedException.cc FieldData.cc FieldDataCollection.cc FieldDefinition.cc FieldDefinitionCollection.cc OutputFixedStream.cc ParsingEngine.cc Schema.cc Statistics.cc String.cc TraceStream.cc TxnStream.cc c_api.cc SocketImpl.cc Socket.cc ServerSocket.cc UnixSocket.cc Thread.cc test.cc | grep -v License | grep -v command | ../dvl.bin/mkdep >.depends
Dependencies updated...
CC -g -D__EXTENSIONS__ -D_SVID_GETTOD -I../h -I/app/oracle/product/9.2_32/precomp/public -I. -xcg92 `getconf LFS_CFLAGS | head -1` -D UT_TRACE_FUNCTION -Dbool=int -g -D -I. -m64 -xarch=sparcvis -c Bitmap.cc
"/opt/SUNWspro/prod/include/CC/Cstd/./limits", line 1046: Error: Multiple declaration for std::numeric_limits<int>.
"/opt/SUNWspro/prod/include/CC/Cstd/./ostream", line 192: Error: Multiple declaration for std::ostream::operator<<(int).
"/opt/SUNWspro/prod/include/CC/Cstd/./ostream", line 351: Where: While specializing "std::ostream ".
"/opt/SUNWspro/prod/include/CC/Cstd/./ostream", line 351: Where: Specialized in non-template code.
"/opt/SUNWspro/prod/include/CC/Cstd/./ostream", line 192: Error: Multiple declaration for std::wostream::operator<<(int).
"/opt/SUNWspro/prod/include/CC/Cstd/./ostream", line 354: Where: While specializing "std::wostream ".
"/opt/SUNWspro/prod/include/CC/Cstd/./ostream", line 354: Where: Specialized in non-template code.
"/opt/SUNWspro/prod/include/CC/Cstd/./istream", line 104: Error: Multiple declaration for std::istream::operator>>(int&).
"/opt/SUNWspro/prod/include/CC/Cstd/./istream", line 373: Where: While specializing "std::istream ".
"/opt/SUNWspro/prod/include/CC/Cstd/./istream", line 373: Where: Specialized in non-template code.
"/opt/SUNWspro/prod/include/CC/rw7/rw/defs.h", line 316: Error: A typedef name cannot be used in an elaborated type specifier..
"/opt/SUNWspro/prod/include/CC/rw7/rw/defs.h", line 317: Error: A typedef name cannot be used in an elaborated type specifier..
"/opt/SUNWspro/prod/include/CC/rw7/rw/defs.h", line 318: Error: A typedef name cannot be used in an elaborated type specifier..
"RuntimeException.h", line 131: Error: Function RuntimeException::~RuntimeException() can throw only the exceptions thrown by the function std::exception::~exception() it overrides.
"RuntimeException.h", line 97: Error: Could not find std::exception::exception(const char*) to initialize base class.
"RuntimeException.h", line 121: Error: xmsg is not a member of std::exception.
"Bitmap.cc", line 62: Error: Cannot return int(Bitmap::*)()const from a function that should return int.
11 Error(s) detected.
make: *** [Bitmap.o] Error 11
In Makefile CFLAGS setting are as follows,
### Setup common symbols for .depends
SRC = $(TEST_SRC)
INCLUDES = $(TEST_INC)
# clean objects, executeable, generated .pc -> .c
CLEAN = -r *.o $(PGM_EXEC) Templates.DB/* SunWS_cache/*
include $(ROOT)/h/common.mak
# The system include directory must be specifically included first because some of the
# ghost includes use system include file names (e.g., generic.h)
# Modified these section to compile on TVLAPP1HAG
CFLAGS += -D $(STDOUT_TRACE)
CFLAGS += -Dbool=int -g -D$(MAINLINE) $(OUR_COLLECTION)
#CFLAGS += -compat -Qoption ccfe -abirel=4.1
#CFLAGS += -Qoption ccfe -abirel=4.1
CFLAGS += -I. -m64 -xarch=sparcvis
#CFLAGS += -I. -mt
# Add the flag for multi-threaded apps
LDFLAGS += -lsocket -lnsl -lthread
# declare an empty macro for compiler directive flags, to be command-line
# driven (ie, for -D directives)
CCFLAGS=
CCFLAGS += -DRW_NO_CPP_RECURSION
# The following manipulation of CC and overriding the .cc.o suffix
# dependency is removed here to use what is supplied by default int
# the h/common.mak file.
#XX = CC
#CC = CC
#COMPILE = $(CC) -o $*.o $(CFLAGS) $(CCFLAGS) -c $*.cc
#.cc.o:
# $(COMPILE)
Please Help

Hello,
Still I am not able to solve the error. please help me.. Please see the below code...
Error:
s3dvap983:/export/home/pshirode/rel_v95/cc_lib > make
Making dependencies...
cc -g -D__EXTENSIONS__ -D_SVID_GETTOD -I../h -I/app/oracle/product/9.2_32/precomp/public -I. `getconf LFS_CFLAGS | head -1` -D UT_TRACE_FUNCTION -g -D -I. -m64 -xarch=sparcvis -H -w -E 2>&1 >/dev/null Bitmap.cc BitmapData.cc BitmapInputTxnStream.cc BitmapOutputStream.cc UnexpectedException.cc FieldData.cc FieldDataCollection.cc FieldDefinition.cc FieldDefinitionCollection.cc OutputFixedStream.cc ParsingEngine.cc Schema.cc Statistics.cc String.cc TraceStream.cc TxnStream.cc c_api.cc SocketImpl.cc Socket.cc ServerSocket.cc UnixSocket.cc Thread.cc test.cc | grep -v License | grep -v command | ../dvl.bin/mkdep >.depends
Dependencies updated...
CC -g -D__EXTENSIONS__ -D_SVID_GETTOD -I../h -I/app/oracle/product/9.2_32/precomp/public -I. `getconf LFS_CFLAGS | head -1` -D UT_TRACE_FUNCTION -g -D -I. -m64 -xarch=sparcvis -c Bitmap.cc
"/opt/SUNWspro/prod/include/CC/rw7/rw/defs.h", line 316: Error: A typedef name cannot be used in an elaborated type specifier..
"/opt/SUNWspro/prod/include/CC/rw7/rw/defs.h", line 317: Error: A typedef name cannot be used in an elaborated type specifier..
"/opt/SUNWspro/prod/include/CC/rw7/rw/defs.h", line 318: Error: A typedef name cannot be used in an elaborated type specifier..
"RuntimeException.h", line 137: Error: Function RuntimeException::~RuntimeException() can throw only the exceptions thrown by the function std::exception::~exception() it overrides.
"RuntimeException.h", line 103: Error: Could not find std::exception::exception(const char*) to initialize base class.
"RuntimeException.h", line 127: Error: xmsg is not a member of std::exception.
"Bitmap.cc", line 62: Error: Cannot return int(Bitmap::*)()const from a function that should return int.
7 Error(s) detected.
make: *** [Bitmap.o] Error 7
96 class RuntimeException : public xmsg {
97 public:
98
99 /**
100 * Create an exception with a simple error message
101 * @param message The error message
102 */
103 RuntimeException(const char* msg) : xmsg(msg) {}
104
105 /**
106 * Create an exception with an error code, fileinfo, and message. This will
107 * produce an error message that looks like:
108 * in File:%s at line#: %d \n %error_message%
109 *
110 * @param error An integer error code. The catch block can use the error()
111 * method to examine this value
112 * @param fileinfo The location in a source file where the error occured
113 * @param msg The error message
114 * @see RuntimeException.error
115 */
116 RuntimeException(int p_error, const Fileinfo& f, const char* msg)
117 {
118 error = perror;
119 strstream buffer;
120 buffer << "in File:"
121 << f.filename()
122 << " at line#:"
123 << f.lineno() << endl << msg
124 << ends; // required for this strstream library, other versions
125 // like Borland the stream is always null terminated
126
127 xmsg::xmsg(buffer.str());
128 delete buffer.str(); // added by db 03-Jul-98 accoprding to the
129 // ssbuf(3C++) man page - other implementations may
130 // use malloc/free but Solaris uses new/delete
131 }
132
133 /** @return the error code */
134 int error() {return _error;}
135
136 /** Clean up instance */
137 virtual ~RuntimeException() {}
138
139
140 protected:
141
142 /**
143 * Default constructor - not very useful to throw an exception without at
144 * least an error message, so this is reserved for only subclasses.
145 */
146 RuntimeException() : xmsg() {}
147
148 private:
149
150 /** the error code associated with the error */
151 int _error;
152 };
153

PofExtractor encoder error when moving from Distributed to Replicated

Hi All,
I have a piece of code which initially used the Distributed Caching scheme with the following configuration:
coherence-cache-config.xml
=================
<cache-mapping>
<cache-name>*</cache-name>
<scheme-name>example-distributed</scheme-name>
</cache-mapping>
<distributed-scheme>
<scheme-name>example-distributed</scheme-name>
<service-name>DistributedCache</service-name>
<serializer>
<class-name>com.tangosol.io.pof.ConfigurablePofContext</class-name>
<init-params>
<init-param>
<param-type>string</param-type>
<param-value>tokens-pof-config.xml</param-value>
</init-param>
</init-params>
</serializer>
<backing-map-scheme>
<local-scheme>
<scheme-ref>example-binary-backing-map</scheme-ref>
<expiry-delay>100000s</expiry-delay>
</local-scheme>
</backing-map-scheme>
<autostart>true</autostart>
<thread-count>2500</thread-count>
"tokens-pof-config.xml"
===============
<?xml version="1.0"?>
<pof-config xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns="http://xmlns.oracle.com/coherence/coherence-pof-config"
xsi:schemaLocation="http://xmlns.oracle.com/coherence/coherence-pof-config coherence-pof-config.xsd">
<user-type-list>

<include>coherence-pof-config.xml</include>

<user-type>
<type-id>1001</type-id>
<class-name>oracle.communications.activation.asap.ace.Token</class-name>
</user-type>
<user-type>
<type-id>1002</type-id>
<class-name>oracle.communications.activation.asap.ace.Asdl</class-name>
</user-type>
</user-type-list>
<allow-interfaces>true</allow-interfaces>
<allow-subclasses>true</allow-subclasses>
</pof-config>
And everything works fine.
Then I changed the caching sheme to a replicated cache instead of a distributed caching scheme by changing the following configuration
<cache-mapping>
<cache-name>*</cache-name>
<scheme-name>example-replicated</scheme-name>
</cache-mapping>
<replicated-scheme>
<scheme-name>example-replicated</scheme-name>
<service-name>ReplicatedCache</service-name>
<serializer>
<class-name>com.tangosol.io.pof.ConfigurablePofContext</class-name>
<init-params>
<init-param>
<param-type>string</param-type>
<param-value>tokens-pof-config.xml</param-value>
</init-param>
</init-params>
</serializer>
<backing-map-scheme>
<local-scheme>
<scheme-ref>unlimited-backing-map</scheme-ref>
</local-scheme>
</backing-map-scheme>
<thread-count>2500</thread-count>
<autostart>true</autostart>
</replicated-scheme>
Once I do this and run my piece of code I start seeing the following error message. Any ideas what i did wrong ?
java.lang.UnsupportedOperationException: PofExtractor must be used with POF-encoded Binary entries; the Map Entry is not a BinaryEntry.
Please help me :)

807103 wrote:
Thanks a ton Robert.
A follow up question, will it be fair to assume hence that a partitioned or distributed cache would be more performant for POF objects as compared to a replicated cache due to full serialization/de-serialization ?
Thanks,
AnkitNot really.
Provided that you have the same set of objects in both the replicated and the distributed cache, then there are a number of factors which are better for replicated cache and some which are better for distributed cache if only query performance is considered:
Replicated cache has all the data locally, hence there is no cost for retrieving data across the network.
If a query can executed completely based on index data, then it is usually faster to query it locally even if set operations for logical expressions in the filter may be more costly, because the number of index operations are the same, you just need to work with larger sets. Again, due to the data being available locally.
If you need to iterate through the entry-set to evaluate the filter one-by one, then distributed cache can do it in parallel on many nodes. On the other hand, since the data is available in Java object form, you usually do not have to pay the deserialization cost, and hence evaluating a ValueExtractor in a replicated cache is faster than evaluating POF-based extractors which have to read through the POF binary until they arrive to the value to extract (it helps to put these to the front by giving them a low property id). Even though you do not generate that much garbage and can break off when you reached the field you want, POF extraction does take some time.
So in general, if you can fit the data into replicated cache with the same indexes, then replicated cache will likely be faster for query performance.
The advantages of the distributed cache above replicated cache starts to become interesting when you want to scale out either your data or your nodes or both:
Data-set size cannot scale with a replicated cache for obvious reasons (it is limited by the smallest cluster node). In a distributed cache you can scale out with the number of nodes (you can have hundreds of nodes with the default configuration in Coherence and with tuning you can grow a bit more).
Cost of updating the data is linear with the number of nodes in a replicated cache and constant in a partitioned (distributed) cache.
It is an interesting fact, though, that most filter-based operations do not scale with increasing the number of nodes, as each node has to execute the operation (unless it is partition-filtered).
Best regards,
Robert

When emailing from iPhoto, the recipients address comes up incorrect, even though it is correct in both my email accounts. How do I edit it? I have changed it, but the next time it appears it contains the same errors.

When emailing from iphoto with a template, the recipients' address comes up incorrect (a couple of letters are wrong). The addresses are correct in both my email accounts, including the one I am using for the iphoto email. I have corrected the address prior to sending the email, but they come up with the same errors the next time I choose them in the iphoto 11 program. How do I correct thes email addresses? thank you

In Mail Preferences/Accounts/each GMail account, set up the SMTP Outgoing Server for each account separately, going into SMTP name/edit/Advanced and specify the Username of each account. The Outgoing servers must be two different servers, authenticated by the Username and Password of each.
Otherwise, the GMail SMTP server will change the from address to that of the account where the SMTP server was setup.
Ernie

Get an error message when importing from iPhoto says, "There is not enough free space on your Aperture Library volume to import the selected items. It is estimated that you need at least 44GB of free space."

I get an error message when importing from iPhoto that says, "There is not enough free space on your Aperture Library volume to import the selected items. It is estimated that you need at least 44GB of free space." the drive is empty, I just reformatted it to Mac OSX journaled.

I'm guessing this is an extrenal drive, correct? If so make sure the library you're importimng into is really located on the external drive. By default Aperture creates its library in your home pictures folder.

LR4.2 - Error when moving files

I can repeatedly reproduce an error when moving files into folders within LR4.2.
My current folder structure is setup like:
F:\pictures\YEAR\Folder name\Sub folder\
When I'm moving files from "Folder name" to "Sub folder" I will be moving approx 6 - 20 photos at a time when sorting them into sub folders. After a while of moving files, LR will stop allowing you to move files and will show up the O symbol with a line through it. Until you close and re-open LR will it allow you to start moving photos again.
I've had this happen 3 times on me now and is completely reproducible. As above, move a small amount of files from a parent folder into a child folder repeatedly and eventually it will refuse to move any more photos until you restart LR.
Windows 7 x64 SP1 Professional
Intel Core i7 950 3.07Ghz
24Gb DDR3 Ram
Nvidia GTX470 Video Card
Intel 520 Series 240Gb SATA3 SSD
Lightroom 4.2 x64
Catalog recently optimised with no issues ever experienced with the catalog.

Hi,
I experienced the same problem and error message this morning ...and found that the following steps will resolve the error (at least when using LR 3 on a MAC):
(1) Open LR and rename all the files that you are trying to move by hitting the F2 button, (MAC shortcut)
(2) Look for any images that may have a '?' mark next to them and resolve if required. (The '?' indicates a file 'location' conflict within the catalogue, - ie you may have moved the files around outside of LR)
(3) While still within LR ....highlight all the files that need to be moved ....and drag and drop them into your preferred new location in the usiual way.
Hope this helps.
Cheers
Simon

When printing from iphoto all photographs ar printed in a pop art style rather than as seen - how do I change this to printing the photo as seen

When printing from iphoto all photographs are printed in a pop art style rather than as seen - how do I change this to printing the photo as seen?

Make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iPhoto folder.
Click to view full size
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
Damaged preference files can cause a varitety of problems which you wouldn't think it could. Deleting and regenerating the pref file is one of the basic fixes to try.
OT

"photo" messed up my events when migrating from iPhoto

I have over 13,000 photos. When my photos were moved from IPHOTO to the new PHOTO every photo is in another place, different album, I can not locate any photo I need. Is there a way to get back the "events", names, titles, etc I had? Any suggestions?

After I installed the last Apple upgrade, which was the "Photos": when I opened photos it "migrated" my photos from iPhoto to photo.
If you prefer, you can still use iPhoto. It will not have been removed from your Mac, just from the Dock. Try to launch it from the applications folder. It will work if you have already updated to the current version iPhoto 9.6.1.
Just confirm, that you want o open iPhoto, when prompted.
when I go to an "album" which should have a say, 100 photos there are 2 or none,
Are your albums smart albums, based on events? They will not work any longer, because there are no events.
seems to be sorting by date because the photos have nothing to do with each other, my cat is with museum photos.
Then you are probably looking at the moments and not your albums. The Moments in the "Photos" view will group the photos by location and date. If there are no location data, they will only be sorted by date.

Lightroom encountered and error when reading from it preview cache and needs to quit

A power outage caused my Lightroom 5.2 to shut down without closing. When I powered back up and opened lightroom it gives me an error "Lightroom encountered and error when reading from it preview cache and needs to quit" and then it says it will try to fix it the next time it opens. I have opened it 20 times and it is not fixing it. I removed the program completely and upgraded to 5.5 AND it is still giving me the same error. Is my catalog corrupt or something? I had it set to automatically load the most currently used catalog, so it is not allowing me to open or start a new catalog either. HELP!!!

Search the forum, this has been answered many times.

I'm unable to open up Lightroom 5, I get this message in a pop up box: "Lightroom encountered an error when reading from it's preview cache and needs to quit" Underneath that is "Lightroom will attempt to fix this problem the next time when it launches."

I'm unable to open up Lightroom 5, I get this message in a pop up box: "Lightroom encountered an error when reading from it's preview cache and needs to quit" Underneath that is "Lightroom will attempt to fix this problem the next time when it launches." It hasn't, what should I do? Thanks Shawn (Irish Se7en) .

Can you try to rename (not delete!) the folder named "YOUR_CATALOG_NAME Previews.lrdata" and restart Lightroom?

"Lightroom encountered and error when reading from its preview cache and needs to quit"

I keep receiving this error every time I open LR, "Lightroom encountered and error when reading from its preview cache and needs to quit" and the app won't open. It said LR would try and fix this error next time I opened it but the error remains. I tried uninstalled and installing the app and the error remains.
Any Ideas here? Is there another app that may be telling it where to look for the cache and it no longer there? I was using a ramdisk for a bit but ditched it. Not sure if that has something to do with it but it seems suspect.
Your thoughts?
--Kenny Brandon Wilson

Talked to Adobe support this morning, this is their response in case anyone else is looking for help. I'm running a Windows 7 box, LR 5.6.
Gokul: Click on start and type %appdata%, then open roaming folder.
Edward: ok
Gokul: Open Adobe folder.
Gokul: Open Lightroom folder.
Gokul: Open Lightroom folder> Preferences.
Edward: ok
Gokul: Rename Lightroom 5 Preferences.agprefs file as Lightroom 5 Preferences.agprefsOLD.
Edward: OK
Gokul: Please check if you can launch Lightroom without any error.
Edward: it shows me a welcome screen and is asking me to select my country
Edward: aka, register the software
Gokul: You can skip and launch it.
Edward: LR catalog not found
Gokul: Please select the catalog.
Edward: my original catalog?
Gokul: Yes.
Edward: testing integrity of catalog
Edward: loaded just fine
Gokul: Okay.
Gokul: Please check if you can re-launch it again.
Edward: yes, it worked!
Gokul: Excellent!
Gokul: Since your preferences were corrupted you were facing issue so we renamed the preferences file to reset it.
Edward: aha....ok
All of my import/export presets were intact along with develop user presets. I'm happy as a clam for my $10/month!

LR encountered an error when reading from its preview cache and needs to quit.

I have the 30 day trial version of Lightroom. I was able to use it for one week, but the past 1.5-2 weeks, it has been locked up and giving this error message. How do I resolve the problem? And how do I reset the 30 day free trial? I would like to have time using the product, before deciding on the annual contract.
"LR encountered an error when reading from its preview cache and needs to quit. Lightroom will attempt to fix this problem the next time it launches."
Thank you.

Delete the preview cache from the Lightroom folder in your Pictures folder if you used the default placement. It has the extension .lrdata.
You cannot reset the trial period.

I keep receiving this error every time I open LR, "Lightroom encountered and error when reading from its preview cache and needs to quit" and the app won't open. It said LR would try and fix this error next time I opened it but the error remains. I tried

I keep receiving this error every time I open LR, "Lightroom encountered and error when reading from its preview cache and needs to quit" and the app won't open. It said LR would try and fix this error next time I opened it but the error remains. I tried uninstalled and installing the app and the error remains. I have windows 8. Can anyone please help???

Use Windows Explorer to open the folder containing your catalog. The normal location is Pictures\Lightroom. Locate a folder with the extension .lrdata and delete that folder. Then you should be able to start Lightroom again, and Lightroom will begin building and new previews folder. Do not delete anything else.

It says Lightroom encountered an error when reading from a previous cache and needs to quit. Light room will attempt to to fix the problem the next time it launches.

how do i fix this. It says Lightroom encountered an error when reading from a previous cache and needs to quit. Light room will attempt to to fix the problem the next time it launches.

Have a look at this thread.
Lightroom encountered an error when reading from its preview cache and needs to quit. Lightroom will attempt to fix this problem the next time it launches"."

JFIF Error when moving from iPhoto 06 to 08

Similar Messages

Maybe you are looking for