JFileChooser and My network Places??

Hello all,
In the Filename of JFileChooser if i type \\100.100.100.100 or even \\100.100.100.100\d$ and click on open button it should ask the username and password of that pc and on appropriate combination of username and password it should show the list of the folder and file of that PC.
How to get this?what is the code that is to be written in the open button event?
Thank you,
Ramesh shrestha

I am running XP home with SP3.  click on start then my network place.  You should see different folders from your other computers and your router.  On the left  it should show either show or hide icons for network upnp.  If you are seeing the icons for lan and wireless and gateway then your computer settings are not setup properly.
Right-click on start then click on properties  Click on customise then advance.  Go down to Network Connections set settings to display as connect to menu.
Greetings from Northern Ontario, Canada

Similar Messages

  • Precalculate and Save Workbook in a client network place

    Hi gurus,
       My customer wants to precalculate and save it in his network place. I'm doing the precalculation with Broadcaster and this has to send it with email. My question is if there is a way to save (automatically) the workbook in the network places after theprecalculation via background process. They don't want to send the workbook with email.
    Thanks in advanced,
    Regards
    Csr

    If you are using the SAP Enterprise Portal, there is a way to do this by creating a "dummy" folder in KM that actually points to a network folder on a remote server. There is a white paper available that describes the steps involved, titled "How to Broadcast a BI Report to a Directory on the Enterprise Portal Server".  (The title is actually somewhat misleading, because the folder can be anywhere, not just on the portal.)
    Here is the link to it:  [https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40027b87-b9a8-2b10-099c-a1312e25a59c ]
    Hope this helps...
    Bob

  • Display only the "My Network Places" in JFileChooser

    Can anyone tell me if there is away to display only the "My Network Places" in the JFileChooser?? i.e to enforce the user to choose directory from the network/

    http://forum.java.sun.com/thread.jspa?forumID=31&threadID=589887

  • WRT600N and Network Places can't see other N device

    I just replaced my WRT350N with a WRT600N. After install, my wired desktop cannot "see" in Network Places my other Desktops Shared Drive which has a Linksys WUS300N. This Desktop (with WUS300N) is able to access the internet wirelessly and all settings in router are default. In addition, my wired desktop can "see" all other G devices in "Network Places", but just can't "see" the WUS300N device in Network Places. Once I put the WRT350N back, all devices can be seen in Network Places. Shut down WRT600N, restarted all units, shut off/on sharing, turned firewalls off...no change
    My wired desktop is Vista Premium 32 Bit
    My wireless desktop is XP Home Edition

    I replaced my WRT350N with the WRT600N too because of all the problems with the 350N and to have the dual band as most of my laptops have wireless N cards. I have not had any problems with this router other than only being able to access my USB Tera drive with my XP machines using ftp, if I try to search for it under network neighborhood as I do on my Visa machines and it only brings up default and it won't let my access my share that I created even with the user I created as an admin on the router to access the USB drive share, but since I can access it using ftp I am not concerned at all and otherwise this router is letting all my N wireless cards including the intel 4965N connect at 270Mbps all the time at the same time 3 other laptops that my kids use are connected too with wireless G cards, so I am a happy camper so far.

  • When i am puting the sim inside the iphone and turns on it is showing SEARCHING at the network place.

    Its IPhone 4, It is in 32GB, and its ios is 7.1.2. when i am putind the sim card inside and turns on the iphone, it is showing SEARCHING at the network place. I restored the iphone but it has no change.

    Hey mohdrabbani,
    I see that you have some issues with the service on your iPhone when using a new SIM card. Here is an article that can help you troubleshoot this:
    If you see No Service in the status bar of your iPhone or iPad - Apple Support
    http://support.apple.com/en-us/ts4429
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • HT4623 My IPhone 4S does not recognize any wi-fi network.  I have turned it off and on a dozen times and tried 6 places which have wi-fi.  Help

    My IPhone 4S does not recognize any wi-fi network.  I have turned it off and on a dozen times and tried 6 places which have wi-fi. 
    I am trying to update to 7.0.2 and cannot because I cannot access a wi-fi.

    Give this a whirl and see if this helps.
    Forget the network on the device and turn wifi off.
    Turn bluetooth off. (Not sure why, but seemed to help with others)
    Turn on airplane mode and then off again.
    Reconnect to you network and open up a browser to confirm connection.

  • Network Place to SharePoint 2010 unable to access sub sites with error: "The folder may have been moved or deleted".

    I am working on SharePoint 2010 Enterprise and had recently upgraded our site from Sharepoint 3.0 Services to SharePoint 2010 Enterprise.  Everything seems to be working fine for the site, but there is one issue.  The problem I am running into
    is when I create a Network Place, I am able to view the documents and lists of the main page, but if I click on a folder for a sub site, I get the following error:
    "Documents in this folder are not available.  The folder may have been moved or deleted, or network problems may be preventing a connection to the server.  There is a problem with the web server.  Please try again later or contact the
    server administrator."
    If there were a network issue, I would not be able to navigate around on the main page to lists and document libraries.  This seems to affect all of the sub sites on my site.  Explorer view works if that information is required and I do not get
    error messages using Explorer view.
    Thanks in advanced for any help on this.
    -Thao

    Hi pei jingw,
    You should be able to log in with your Adobe ID/password in lieu of a serial number. Are you able to do that?
    Best,
    Sara

  • Make sure your network settings are correct and your network connection is active, or try again later; Have been trying to fix for ages.

    Hi Everyone, been struggling all day to restore my settings on my ipod, as my little brother has put a restriction password in place and made me not able to get into Safari, iTunes, Camera which I really need. I have tried everything, resetting my proxy settings, turning off the firewall, changing my network location, ran diagnostics. Everything seems fine on that, I post below my results. I also tried restoring from the device, but with the restrictions code in place I can not do so. And everytime I am dowloading the software update before the restore it comes up with 'Make sure your network settings are correct and your network connection is active, or try again later'. I have been using google for ages and am not sure what I have missed.
    I am using Windows 7 with an Acer Notebook.
    DIAGNOSTICS:
    Microsoft Windows 7 Enterprise Edition Service Pack 1 (Build 7601)
    Acer Aspire One 753
    iTunes 11.0.2.26
    QuickTime 7.7.3
    FairPlay 2.3.31
    Apple Application Support 2.3.3
    iPod Updater Library 10.0d2
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 6.1.0.13
    Apple Mobile Device Driver 1.64.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 00BCBEE0093E4EF0
    Current user is not an administrator.
    The current local date and time is 2013-04-05 19:32:36.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    Video Display Information
    Intel Corporation, Intel(R) HD Graphics
    **** External Plug-ins Information ****
    No external plug-ins installed.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:     {E1CB97AA-CDFF-4C43-8F63-658D7E70A39F}
    Description:     Intel(R) Centrino(R) Advanced-N 6205
    IP Address:     172.16.42.14
    Subnet Mask:     255.255.255.0
    Default Gateway:     172.16.42.1
    DHCP Enabled:     Yes
    DHCP Server:     172.16.42.1
    Lease Obtained:     Fri Apr 05 19:01:59 2013
    Lease Expires:     Fri Apr 05 20:01:59 2013
    DNS Servers:     172.16.42.1
    Adapter Name:     {44D6CC7B-1F1E-4F26-BBB8-18F98A868E2B}
    Description:     Atheros AR8151 PCI-E Gigabit Ethernet Controller (NDIS 6.20)
    IP Address:     0.0.0.0
    Subnet Mask:     0.0.0.0
    Default Gateway:     0.0.0.0
    DHCP Enabled:     Yes
    DHCP Server:
    Lease Obtained:     Thu Jan 01 11:00:00 1970
    Lease Expires:     Thu Jan 01 11:00:00 1970
    DNS Servers:
    Active Connection:     LAN Connection
    Connected:     Yes
    Online:          Yes
    Using Modem:     No
    Using LAN:     Yes
    Using Proxy:     No
    Firewall Information
    Windows Firewall is on.
    iTunes is enabled in Windows Firewall.
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was successful.
    Connection attempt to firmware update server was successful.
    Connection attempt to Gracenote server was successful.
    Last successful iTunes Store access was 2013-02-14 17:34:33.
    **** Device Connectivity Tests ****
    iPodService 11.0.2.26 is currently running.
    iTunesHelper 11.0.2.26 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B34.  Device is working properly.
    Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B3C.  Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.
    Connected Device Information:
    Daniel Pugh's Ipod, iPod touch (4th generation) running firmware version 6.1.3
    Serial Number:     C3XDN3C5DCP7
    Most Recent Devices Not Currently Connected:
    iPhone 4S running firmware version 5.0.1
    Serial Number:     C38GKQWZDT9Y
    **** Device Sync Tests ****
    Sync tests completed successfully.
    Kindest Regards
    Daniel (Puggy858)

    Hi Diesel vdub,
    Did that and I tried again, download stops halfway through and comes up with same message I have already quoted. Wifi Signal is 5/5, network is working, just not letting me download via iTunes.

  • Can't view computers in My Network Places- WRT160N

    I just replaced a D-Link router with a WRT160N.  Now I can no longer see the other computers (all wired) in My Network Places.  All I see is the WRT160N.  What do I need to do to see the other computers on the network?

    If you have any software firewall on computers, make sure the router is added to trusted networks on all computers. Try to ping computers from each other, and check for replys.

  • Network places no longer connects

    Hi all
    I'm a complete noob on solaris and net working.
    I was always able to connect my two computers using Network Places on solaris 10 without any configuration, on an a previous installation. I have since re-installed Solaris, my two computers are connected to a router, The other computer is running win98, Im quite sure the Windows machine is configured correctely, I can ping from both machines successfully and sure Samba is running.
    I have downloaded nearly all updates for solaris but Network Places just wont browse the network
    Any suggestions would be a help.
    Thxs

    Hello,
    Just discovered what im doing wrong. Upon further installations I decided that Mozilla is good enough and is better at spam control than Evolution and excluded Evolution from the install, not realizing that, that action also exclude a dependant of Samba that is not listed as a dependant which is TLS (transport layer security).
    Now, all is well :)

  • Can I setup "Roaming" and "Extended Network" on the same device?

    I have 2 buildings that need wifi coverage.  In the main building, I have 2 Apple Airport Extremes.  I have one as the main router.  The 2nd has a network cable from the 1st unit and is setup as "Roaming".  I would like to add "Extended Network" (wireless) function to the 2nd unit.  Then I would place a 3 Airport Extreme at the 2nd building.  I have signal at the 2nd building, but I would like it to be stronger. 
    Can I setup an Airport Extreme with Roaming and Extended Network functions and if so, how would I do it.
    Thank you.

    Yes, that should be no problem.
    Windows 7 uses 5.6 airport utility.. what model extreme are you setting up??
    But it is relatively simple.. you do not need to generally do anything now for the AE setup for roaming..
    On the one you will extend, simply plug it into a computer.. run the airport utility.. go to the wireless tab and put in the extend wireless with the name and security of the wireless you are extending.

  • MacPro not seen in XP's "my network places"

    Hi,
    I have a small business network made of 6 macs (from G3 to MacPro, all with OSX 10.4.9) and 1 PC with XP Pro.
    All the Macs have Windows sharing enabled with WORKGROUP name.
    My problem is that I can see every Mac in PC's "my network places/workgroup" except one, the MacPro. It is not seen under WORKGROUP in other Macs but it is in "My network".
    It can see all the WORKGROUP members, PC included.
    I wonder if this can be due to its Intel processor (the only one in this network, excepted the PC) or if I missed something ?
    Any ideas ?
    Thank's for help.
    MacPro 2.66 Ghz   Mac OS X (10.4.9)  

    Don't have an IntelMac to try, but I think I'd try toggling the Firewall settings and Sharing Prefs on and off with a log out/in or two on that Mac... it can take up to 50 minutes for a Share to show up in XP also!
    Second guess would be to trash...
    /Users/nnnn/Library/Preferences/com.apple.internetconnect.plist
    /Library/Preferences/SystemConfiguration/preferences.plist
    /Library/Preferences/SystemConfiguration/com.apple.airport.preferences.plist (If AP is used)
    /Library/Preferences/com.apple.sharing.firewall.plist
    Then reboot and set up the prefs again.

  • WRT54G in My Network Places

    Hello, I had been having some problems with my connection and an Exception GIFException in Module aviWUSB54Gv4.dll@002516B. Then is just went away as suddenly as it showed up. However,when the error was gone I noticed that my connection/security settings were back to what they were when I first installed the WRT54G (version6) wireless g broadband adapter and the WUSB54G (version 4) network adapter. I had saved the directions I was given some time ago for securing my wireless network. I launched IE and typed in 192.168.1.1 and logged in. Once on the setup page I selected the wireless settings to change the network name, change the channel from 6 to 11 and selected the apply/save settings button. However after doing that I lost my internet connection and it has taken me all day to get it back (and I'm not really sure just how I managed to get it back). For the longest time I kept getting a message stating that "cannot connect with the access point" I went to start and clicked on my network places and noticed that the icon for WRT54G is gone. I tried uninstalling everything and reinstalling the software, resetting the wireless broadband router and a few other things but none of it was fixing the problem and using the run/cmd/ipconfig options did nothing as well so like I said, I have not idea how I managed to get my connection back. Anyway, I would like to reset my settings and make the wirless connection more secure but am afraid to try it again. I also went back to the My Network Places and the icon for the WRT54G still is not there. Any suggestions would be GREATLY Appreciated. TIA Lisa

    Hello Again, I really would appreciate it if someone could please be so kind as to help me. I still do not have the little icon for the WRT54G in the My Network Places. I do have my internet connection but that little icon is missing (I won't worry about it if it isn't a problem). Also, if someone could give me the steps to follow to secure my wireless settings (instead of being listed as disabled) again I would greatly appreciate it. I only ask since when I tried to follow the instructions I had been given before I ended up with the problem of loosing my internet connection completely and that is also when the little icon in the my network places disappeared as well. TIA

  • Can't see the capsule on windows xp my network places

    Hello
    after upgrading the FW to latest one now i can't see the capsule on my network places as usual..
    the only way now to access it is to install the airport utility and let it mount the drive for me..
    is that normal and how to make capsule accessible under my network places??
    thanks

    Did you ever figure this out? im having a similar problem. Thanks.

  • Windows 7 does not see other computers in My Network Places

    Hi all,
    I have a weird issue with a behavior of Windows 7 machines. The setup is as following: domain with WinSrv 2008R2 DC-s, functional level of the domain is WinSrv2008R2, there are Windows XP and WIndows 7 machines on the network. Users use My Network places
    to access shares on other people-s PC's. Everything was fine while we had WinSrv2003 domain controller. After it was upgraded to WinSrv2008R2, Windows 7 machined cannot see all of the computers in My network places. To make things even worse, there are no
    rules - some Win 7 machines see others just fine, some see 30 PC's (out of 100), some see all after doing a refresh...all sorts of different situations. I have no idea where else to look. Can it be some DNS setting that I missing? Any help is much appreciated
    Dino

    Hi Dino,
    As I known, by default computer browser service is not started in windows 2008 server and higher OS.
    You should enable NetBios over TCP/IP on the NCI settings and start the browser service in the services.msc and it should show you all the list of computers connected on
    network.
    we should enable Network Discovery in the Network and Sharing Center first.
    Please also temporarily turn off firewall on each machine.
    In addition, please modify relevant settings on Windows 7 machine.
    a. Click Start and open Control Panel.
    b. Open "Network and Sharing Center" and click "Advanced sharing settings".
    c. Expand the current network profile (such as "Home or Work"), and then select the following options:
    "Turn on Network Discovery",
    "Turn on file and printer sharing",
    "Turn on sharing so anyone with network access can read and write files in the Public folders",
    "Turn off password protected sharing"
    If the issue persists, try to access another computer by entering
    \\computername in the Start Search box. Let us know if it works properly.
    For a test, you may also disable IPv6 in adapter properties.
    a. Click the Start Button, type "devmgmt.msc" (without quotation marks) in the Start Search box and press Enter.
    b. Double click to expand "Network Adaptors".
    c. Right click your network card and click Properties.
    d. Click Advance tab. High light Speed & Duplex
    e. If you would like to use the full functionality, please set the Value to the highest Full.
    f. Click OK.
    Hope it helps.
    Regards,
    Blair Deng
    Blair Deng
    TechNet Community Support

Maybe you are looking for