Jfmerge: [240]Failure loading colour palette from form file.
Hi All,
I need your help. I am new to JetForm and have to use it because of my work. Recently I have been assigned a task which is to amend an existing form, however, when I opened it with the JetForm Designer, it prompted me with message #4043 with following information:
The current settings for Symbol Set handling are different
from when the form was last saved.
Form: Convert is Yes,950,950
Current: Convert is Yes,1252,850
I skipped the warning message and just compile the MDF file directly without any changes. Then, I just got the "jfmerge: [240]Failure loading colour palette from form file." error message during the printing process. May I know how could I fix it? Please help and advise.
Thanks,
Charoite
Hello,
I have exactly same problem than you while opening an existing .ifd file :
The current settings for Symbol Set handling are different from when the template was last saved.
Template : Convert is No,936,850
Current : Convert is N0,1252,850
I suppose it is due to chinese characters (Simsun font) bad installed on my desktop, but it is only hypothesis.
Did you achieve to avoid this message since 05/2011 ?
Similar Messages
-
How to load the data from excel file into temprory table in Forms 11g?
Hi
How to Load the data from excel file(Extension is .CSV) into the temporary table of oracle in Forms11g.
My Forms Version is - Forms [64 Bit] Version 11.1.2.0.0 (Production)
Kindly Suggest the Solution.
Regards,
SachinDeclare
v_full_filename varchar2(500);
v_server_path varchar2(2000);
v_separator VARCHAR2(1);
v_filename VARCHAR2(400);
filename VARCHAR2 (100);
v_stop_load varchar2 (2000);
v_rec_error_log varchar2(4000);
v_error_log varchar2(4000);
ctr NUMBER (12);
cols NUMBER (2);
btn number;
RES BOOLEAN;
application ole2.obj_type;
workbooks ole2.obj_type;
workbook ole2.obj_type;
worksheets ole2.obj_type;
worksheet ole2.obj_type;
cell ole2.obj_type;
cellType ole2.OBJ_TYPE;
args ole2.obj_type;
PROCEDURE olearg
IS
args ole2.obj_type;
BEGIN
args := ole2.create_arglist;
ole2.add_arg (args, ctr);
ole2.add_arg (args, cols);
cell := ole2.get_obj_property (worksheet, 'Cells', args);
ole2.destroy_arglist (args);
END;
BEGIN
v_full_filename := client_get_file_name(directory_name => null
,file_name => null
,file_filter => 'Excel files (*.xls)|*.xls|'
||'Excel files (*.xlsx)|*.xlsx|'
,message => 'Choose Excel file'
,dialog_type => null
,select_file => null
If v_full_filename is not null Then
v_separator := WEBUTIL_CLIENTINFO.Get_file_Separator ;
v_filename := v_separator||v_full_filename ;
:LOAD_FILE_NAME := substr(v_filename,instr(v_filename,v_separator,-1) + 1);
RES := Webutil_File_Transfer.Client_To_AS(v_full_filename,"server_path"||substr(v_filename,instr(v_filename,v_separator,-1) + 1));
--Begin load data from EXCEL
BEGIN
filename := v_server_path||substr(v_filename,instr(v_filename,v_separator,-1) + 1); -- to pick the file
application := ole2.create_obj ('Excel.Application');
ole2.set_property (application, 'Visible', 'false');
workbooks := ole2.get_obj_property (application, 'Workbooks');
args := ole2.create_arglist;
ole2.add_arg (args, filename); -- file path and name
workbook := ole2.get_obj_property(workbooks,'Open',args);
ole2.destroy_arglist (args);
args := ole2.create_arglist;
ole2.add_arg (args, 'Sheet1');
worksheet := ole2.get_obj_property (workbook, 'Worksheets', args);
ole2.destroy_arglist (args);
ctr := 2; --row number
cols := 1; -- column number
go_block('xxx');
FIRST_RECORD;
LOOP
--Column 1 VALUE --------------------------------------------------------------------
olearg;
v_stop_load := ole2.get_char_property (cell, 'Text'); --cell value of the argument
:item1 := v_stop_load;
cols := cols + 1;
--Column 2 VALUE --------------------------------------------------------------------
olearg;
:item2 := ole2.get_char_property (cell, 'Text'); --cell value of the argument
cols := cols + 1;
--<and so on>
ole2.invoke (application, 'Quit');
ole2.RELEASE_OBJ (cell);
ole2.RELEASE_OBJ (worksheet);
ole2.RELEASE_OBJ (worksheets);
ole2.RELEASE_OBJ (workbook);
ole2.RELEASE_OBJ (workbooks);
ole2.RELEASE_OBJ (application);
END;
--End load data from EXCELPlease mark it as answered if you helped. -
How to Load the data from excel file(Extension is .CSV) into the temp.table
Hi
How to Load the data from excel file(Extension is .CSV) into the temporary table of oracle in Forms11g.
My Forms Version is - Forms [64 Bit] Version 11.1.2.0.0 (Production)
Kindly Suggest the Solution.
Regards,
SachinHello Sachin,
You can use the following metalink note:How to Read Data from an EXCEL Spreadsheet into a Form Using Webutil Client_OLE2 (Doc ID 813535.1) and modify it a little bit.
Instead of copy values into forms you can save them in your temporary table.
Kind regards,
Alex
If someone's helpful or correct please mark it accordingly. -
Unable to load new information from configuration file /var/ldap/ldap_clien
Hi all,
When I run the command "ldapclient init", I got the error message:
# ldapclient init -a proxyDN=cn=proxyagent,ou=profile,dc=example,dc=ca -a domainName=example.ca -a profileName=UserProfile -a proxyPassword=pwd 10.1.10.50
Unable to load new information from configuration file '/var/ldap/ldap_client_file' ('Unable to open filename '/var/ldap/ldap_client_file' for reading (errno=2).').
Any idea?
Thanks a lot for your help!Does the profile UserProfile exist on your LDAP server?
Do the logs on your LDAP server show access problems?
Try using -v to get more verbose output -
How to load the data from .csv file to oracle table???
Hi,
I am using oracle 10g , plsql developer. Can anyone help me in how to load the data from .csv file to oracle table. The table is already created with the required columns. The .csv file is having about 10lakh records. Is it possible to load 10lakh records. can any one please tell me how to proceed.
Thanks in advance981145 wrote:
Can you tell more about sql * loader??? how to know that utility is available for me or not??? I am using oracle 10g database and plsql developer???SQL*Loader is part of the Oracle client. If you have a developer installation you should normally have it on your client.
the command is
sqlldrType it and see if you have it installed.
Have a look also at the FAQ link posted by Marwin.
There are plenty of examples also on the web.
Regards.
Al -
How to load the data from excel file into table in oracle using UTL_FI
How to load the data from excel file into table in oracle
and from table to excel file
using UTL_FILE package
Please give me some exampleThis is something i tried in oracle apex
http://avdeo.com/2008/05/21/uploading-excel-sheet-using-oracle-application-express-apex/
Regards,
CKLP -
SQL Loader to Load Multiple Tables from Multiple Files
Hi
I wish to create a control file to load multiple tables from multiple files
viz.Emp.dat into emp table and Dept.dat into Dept table and so on
How could I do it?
Can I create a control file like this:
OPTIONS(DIRECT=TRUE,
SKIP_UNUSABLE_INDEXES=TRUE,
SKIP_INDEX_MAINTENANCE=TRUE)
UNRECOVERABLE
LOAD DATA
INFILE 'EMP.dat'
INFILE 'DEPT.dat'
INTO TABLE emp TRUNCATE
FIELDS TERMINATED BY "|" OPTIONALLY ENCLOSED BY '"'
(empno,
ename,
deptno)
INTO TABLE dept TRUNCATE
FIELDS TERMINATED BY "|" OPTIONALLY ENCLOSED BY '"'
(deptno,
dname,
dloc)
Appreciate a Quick Reply
mailto:[email protected]Which operating system? ("Command Prompt" sounds like Windows)
UNIX/Linux: a shell script with multiple calls to sqlldr run in the background with "&" (and possibly nohup)
Windows: A batch file using "start" to launch multiple copies of sqlldr.
http://www.pctools.com/forum/showthread.php?42285-background-a-process-in-batch-%28W2K%29
http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/start.mspx?mfr=true
Edited by: Brian Bontrager on May 31, 2013 4:04 PM -
SQL* Loader Loading specific column from CSV file to the table
Dear All,
Iam Loading specific column from .CSV file to the oracle table.
Could pls help how i can load only that cols into the table
Eg: CSV file having id, Frst_name,Last_name, Address,Phone,Insurance etc
out of this I want to load only Frst_name,Last_name columns to oracle table say fname and lname.
Thanks in Adv.
JunuLily,
I made some changes to your table def but you will get the idea
-- Table EMPLOYEE
CREATE TABLE EMPLOYEE
EMPID NUMBER NOT NULL,
EMPNICKNAME VARCHAR2(10 BYTE) NULL,
FNAME VARCHAR2(20 BYTE) NOT NULL,
MI VARCHAR2(20 BYTE) NULL,
LNAME VARCHAR2(20 BYTE) NOT NULL,
FULLNAME VARCHAR2(20 BYTE) NOT NULL,
HIREDATE DATE DEFAULT SYSDATE NOT NULL
-- data file employee.dat
1,amy,b,amy b
2,cindy,d,cindy d
3,eric,f,eric f
4,gary,h,gary
-- Control file : Employee.ctl ( you can use truncate, replace or append , see sqlldr for more options)
load data
Truncate into table employee
fields terminated by ","
optionally enclosed by '"'
TRAILING NULLCOLS
empId INTEGER EXTERNAL,
FName char(20),
LName char(20),
FullName char(30)
now to load use following or you can speicify infile in control fle
sqlldr username/passowrd control=employee.ctl data=employee.dat log=employee.log
{code}
Hope this help.
Regards -
Issue in loading specific columns from a file to teradata table using IKM
Hi,
Can any one help to resolve the issue in loading specific columns from text file to teradata table.
i tried using IKM file teradata and columns are getting displaced.
my requirement suppose i have 5 columns in file and i have to load only 3columns to table using IKM.
same thing can be achived using LKM file to teradata but i want use IKM.
please suggest me on this
Regards
VinodHi,
I believe that the problem you are having is that you have a delimited file, of which you want to pick columns from position 2,3,5. In this case, ODI will pick the first 3 columns of a delimited file regardless of position.
For example, if you a tab delimited file with c1,c2,c3,c4,c5 columns, and you want only columns c2,c3,c5 - when mapping these in an ODI interface, and executing, you will actually pick up the data from c1,c2,c3 as these are the first three columns in the file (reading from left to right). You can ignore "columns" on the right hand side of a file, but not the left. E.g delimited file with c1,c2,c3,c4,c5. Only pick columns c1,c2 will give you data for the first 2 columns
Create a temporary table to load all the data from the file, and use you temp table to extract the data you require. Or you could get the file created with the first three columns as the columns you require.
Cheers
Bos
Edited by: Bos on Jan 18, 2011 1:06 PM -
Load the text from a file to JTextField, I need help badly
Can anybody help me, I try to load the text from a file to JTextField,
it compiled but it does not run
here the message i get:
----jGRASP exec: java buttonAction
----at: Sep 11, 2007 6:27:09 PM
----jGRASP wedge: pid for wedge is 3104.
----JGRASP wedge2: pid for wedge2 is 216.
----JGRASP wedge2: CLASSPATH is ".;;.;D:\Program Files\QuickTime\QTSystem\QTJava.zip;D:\Program Files\jGRASP\extensions\classes".
----jGRASP wedge2: working directory is [L:\Documents\GUI Pro] platform id is 2.
----jGRASP wedge2: actual command sent ["D:\Program Files\Java\jdk1.5.0_01\bin\java.exe" buttonAction].
----JGRASP wedge2: pid for process is 1440.
Exception in thread "main" java.lang.NullPointerException
at buttonAction.loadData(buttonAction.java:122)
at buttonAction.<init>(buttonAction.java:31)
at buttonAction.main(buttonAction.java:163)
----jGRASP wedge2: exit code for process is 1.
----jGRASP: operation complete.
private void loadData()
try
FileReader fr = new FileReader("myData.txt");
BufferedReader br = new BufferedReader(fr);
br.readLine();
while(br != null)
name.setText(br.toString());
catch (IOException e){}
}See this demo:
import java.io.*;
import javax.swing.*;
import java.awt.event.ActionListener;
import java.awt.event.ActionEvent;
import java.awt.FlowLayout;
public class TextFieldTest extends JFrame {
private JLabel fieldLabel;
private JTextField field;
private JButton loadTextBtn;
public TextFieldTest() {
initComponents();
private void initComponents() {
fieldLabel = new JLabel();
field = new JTextField(30);
loadTextBtn = new JButton("Load Text");
this.getContentPane().setLayout(new FlowLayout());
this.getContentPane().add(fieldLabel);
this.getContentPane().add(field);
this.getContentPane().add(loadTextBtn);
this.pack();
this.setLocationRelativeTo(null);
this.setTitle("TextFieldDemo");
this.setDefaultCloseOperation(EXIT_ON_CLOSE);
loadTextBtn.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent evt) {
loadText();
private void loadText() {
try {
BufferedReader br = new BufferedReader(new InputStreamReader(new FileInputStream("test.txt")));
String label = br.readLine();
String data = br.readLine();
br.close();
fieldLabel.setText(label);
field.setText(data);
} catch (Throwable t) { t.printStackTrace(); }
public static void main(String[] argv) {
SwingUtilities.invokeLater(new Runnable() {
public void run() {
new TextFieldTest().setVisible(true);
}The contents of test.txt are as follows:
this is the label
the data for the field goes here -
How to load some text from properties file ?
Hi again,
problem is i dont know how can i load a text from properties file like #{xxx['key']} in managed bean, i tried to find some solution but havent seen this kind of use this file in java code. Is it supposed to work only for labels in jspx pages ?
thanks for help ...Hi,
a managed bean is nothing special from any other Java file. However, if you look at SRDemo, you find a nice way of using the same message bundle that you use on the page
See the messageFromBundle() method in the JSFUtils class of the UserInterface project
Frank
P.s. You can download and setup SRDemo from JDeveloper help--> check for updates -
Load Sales Order from Xml file
Hi,
I want to load a sales order from xml file. How can I do so? Where I'll get the xml schema for Sales Order or other documents (delivery,invoice etc)?
Plz reply with code and xml file.When I'm going to load SO from xml file, it's showing an error:
"The connected value 0 was not found in table Uasge of Nota Fiscal".
What is this table for? Which attribute is related with this table?
How can I find out that? -
How to Load Arabic Data from flat file using SQL Loader ?
Hi All,
We need to load Arabic data from an xls file to Oracle database, Request you to provide a very good note/step to achieve the same.
Below are the database parameters used
NLS_CHARACTERSET AR8ISO8859P6
nls_language american
DB version:-10g release 2
OS: rhel 5
Thanks in advance,
SatishTry to save your XLS file into CSV format and set either NLS_LANG to the right value or use SQL*Loader control file parameter CHARACTERSET.
See http://download.oracle.com/docs/cd/B19306_01/server.102/b14215/ldr_control_file.htm#i1005287 -
How to load the data from flat file ( ex excel ) to Planning area directly
Hi all ,
How can i load thedata fro m flat file directly to Planning area .
PLease help me in this.
Regards,
Chandu .download one key figure data from planning book ( interactive damand plan) and made some changes and need to upload the data back to same planning book
But, may I know why you are thinking of downloading, changing and uploading for just changing the figures for a particular key figure. You can do it in the planning book itself.
However, not all the key-figures can be changed. But, what type of key-figure you are speaking here? Is it like 'Forecast' for which the value is based on other key-figures, or is like a key-figure where some manual adjustments are to be done--so that it can be manually edited? However, in both the cases, the data can be changed in the planning book only. In first case, you can change the values of dependant key-figures and in the second case, you can change the key-figures directly.
And please note that you can change the values of the key-figures only at the detailed level. So, after loading the data in the book, use drill-down option, maintain the data at the detailed level, change the figures, and automatically, this gets reflected at the higher level.
In case you are unable to change the values, go to the 'Design' mode of the book, right-click your key-figure, under "Selected Rows", uncheck "Output Only" option. In case you are unable to see that option, then you are not authorised to change that. See if you can change the authorisations by going to the "Data View" tab in planning book configuration (/n/sapapo/sdp8b), and change the value of Status to 3.
Hope your query is answered with different solutions offered by many of the sdn colleagues here.
Regards,
Guru Charan. -
Error while loading the data from text file
Hi,
I got an error " Data Value Encountered before all Dimensions selected" while loading the data from the text file.
Can any one please suggest me the solution.Possible Solutions
Make sure that the data source is valid.
Is a member from each dimension specified correctly in the data source or rules file?
Is the numeric data field at the end of the record? If not, move the numeric data field in the data source or move the numeric data field in the rules file.
Are all members that might contain numbers (such as "100") enclosed in quotation marks in the data source?
If you are using a header, is the header set up correctly? Remember that you can add missing dimension names to the header.
Does the data source contain extra spaces or tabs?
Has the updated outline been saved?
Maybe you are looking for
-
Hi: Is it possible to "schedule" a webi report from the portal iview? In my case, I am able to create an iview and link the report ID with it. This lets me see the webi report. Upon clicking EDIT I can go to edit mode (as of now I am investigating th
-
Impossible to send back a CSV file containing more than 8000 chars
Hello, I work on an application using Spring and I try to write a String of around 19000 chars in a CSV file that I send back to the client with the method PrintWriter.write (response.getWriter().write) of the object HttpServletResponse. Here is the
-
Final Cut Pro is now crashing randomly while I am working. This is a new problem, as final cut has always been quite reliable for me. Any suggestions??
-
Problem in a class :(
Could someone help me to find why the intRead method doesn't work ??? import java.io.*; public class EntreeFormatee { public static void main(String[] args) { // M�thode permettant de lire une valeur int... public int intRead
-
how to get my iphone working again when my network detects a "no sim"