JFS and ext3 really NOT supported with Tiger?
Hello Mac People!
I'm wondering, that there seems to be NO ext3 support for MacOs 10.4???
Why that?
My opinion iis that this missing driver support is an evidence of incapacity for macos x.
I have about eight external IEEE1394 drives formatted with ext3 and one with JFS, but none of them is recognized by may bloody macbook ;-(
Next step will be to remove Macos completely and install linux
No, I'm sorry, but
http://sourceforge.net/projects/ext2fsx
won't work under Tiger (10.4)...
So the items on that page that talk about Tiger support being available now are inaccurate?
Similar Messages
-
i just purchased a refurbished ipad gen 1 when i pluged in the wall charger with the usb cable a window came up and said (charging not supported with this accesory) the battry was almost dead so i pluged in the wall charger and
the battery has been charging for 24 hrs and is only 50%charged it is the factory use charger for this unit why does this error come up and why is it taking so long the software is up to dateNot normal. Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
Cheers, Tom -
HELP! iPad just started not charging and saying accessory not supported!
I have tried my normal wall charger and cord from Apple, tried the USB on the computer, changed the cords out etc.
Just started doing this within the last day. I have no idea why.
It is recognized on my computer, however my normal desktop where I back up is down so I don't want to do a restore on it.
Any suggestions????
This is the first original iPad and software is up to date.I've been getting this problem for a few days now , i've found that if i pull the usb connector back slightly from the socket on my PC it charges fine , push the connector fully in and 'Charging is not supported with this accessory' comes up , i've checked it a number of times , i just pull the usb connector back until the charging symbol comes on .
Be good to know if what i posted fixes anyone elses charging problem , it seems to me that when the 2 middle pins connect inside of the usb plug my phone sometimes doesn't like it , and by pulling the plug back so they don't connect, it then starts charging.
atb
Wizard9956 -
HT4060 ' charging not supported with this accessory' and Not Charging at all
Help and advice please.
I am having problems getting the new IPad to charge at all and sometime it displays this message.
' charging not supported with this accessory'. This message is appearing occasionally on my 5 week old new iPad (3) within a few minutes of plugging it in. :( It is also not charging after this message appears. I am using the supplied wall socket and cable. I am also having problems getting the iPad to charge at all even if the message does not show. This is frustrating me no end. I expected a reliable device given the amount I paid.
I am so disappointed, frustrated and feeling some what angry.
I rang Apple support today (twice) and it made a liar of me working just fine for few minutes the first time then again failed, then for hour or so after the second call seemed to work just fine. Now it is not charging, and won't charge despite repeatedly unplugging and repluging, Switching off the iPad and turning it back on etc etc.
I am not happy at all!Not normal. Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
Cheers, Tom -
Hi i have an ipod 4 and i have a wall charger but every time i try to charge it it says "charging not supported with accessory" can i do anything to fix it ?
Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
Hi can any body please tell me how to open the .exe files in mac and why it is not supported with unarchiever app , also i am not able to run and dvd's in my mac its not accepting any cd's or dvd'd why? do i need to do some pre defined settings to run the cd's and dvd's ?
A .exe file is a Windows executable. OS X does not run Windows programs. If you need to use .exe files then you will need to install Windows on your Mac:
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
Install the Apple Boot Camp software. Purchase Windows XP w/Service Pak2, Vista, or Windows 7. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7. Parallels is software virtualization that enables running Windows concurrently with OS X.
VM Fusionand Windows XP, Vista Business, Vista Ultimate, or Windows 7. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris. It is not as fully developed for the Mac as Parallels and VM Fusion.
Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive. -
I have Photoshop Elements 9. I downloaded the plug in 6.0 and it works on the RAW files from Canon EOS 60D, but not with Canon EOS 70D. I cannot download higher versions of plug in, because I have Windows Vista and it is not supported.
You could try using the DNG converter 8.7 on Windows vista:
<Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.7>
<Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.7>
You then need to watch this video to get hang of it:
<Camera Raw: How to use Adobe DNG Converter - YouTube>
Hope this helps. -
Opportunities are not supported with SAP Business One 2005A SP0 and SP1??
In SBO Note 973962 says that opportunities are not supported with 2005A sp0 and SP1.
When running 5.9.7 I can sync opportunities.
So does anyone know what is and what is not supported in this version for Opportunities?
Thanks,
Eric RasenbergFull functionality is not shared nor synchronized between systems for opportunities in 5.9.x
-
I'm trying to connect my iPad to my Samsung galaxy s by bluetooth but the ipad will pair with it but not connect and says "its not supported" does anyone know what this means and how I get it to work?
iOS devices do not have the BT profiles that support file sharing and othr general functions. See:
iOS: Supported Bluetooth profiles
Basically it support headphones, keyboards, speakers, peer-to-peer gaming -
Charging is not supported with this accessory iPhone 5 and lighting adapter
I just received my 30 pin lighting adapter for my iPhone 5 and connected it to my existing BMW (2008 335i) factory 30 pin cable.
The battery changes to the charge symbol for a few seconds and then I get a error on my phone that says "charging is not supported with this accessory".
Other than that I am able to search and play music from my phone through my car's audio system without isssue.
I have had this car for 4 years and used it with my 3rd generation iPod touch without issue. Wondering if anyone else is experiencing
charging issues with the new adapter and their exisiting setups,I purchased the following adapter from Amazon for my 2009 335i, and all functions (including charging) work fine on my iPhone 5:
http://www.amazon.com/gp/product/B004E5J61G/ref=oh_details_o03_s00_i00 -
on my 3gs keep getting error message charging not supported with this accessory even when its not plugged in and i have done a restore anyone know how to fix
Clean the iPhone charging port with a clean dry toothbrush.
-
I'm on a mac, version 10.5.8, and firefox will not download. It has a prohibit sign over it, and says 'cannot be supported with this architecture'
Firefox 4 versions and later do not run on a PowerPC Mac.<br />
Firefox 4 and later require at least OS X 10.5 and an Intel Mac.
* http://www.mozilla.com/firefox/6.0/system-requirements/
For an unofficial Firefox 7 compatible version (TenFourFox) that runs on PowerPC Macs with OS X 10.4.11 or OS X 10.5.8 you can look at:
* http://www.floodgap.com/software/tenfourfox/
* http://www.macupdate.com/app/mac/37761/tenfourfox
Firefox 3.6.x (Mac OS X 10.4 and later) can be found here:
* http://www.mozilla.com/en-US/firefox/all-older.html -
HELP!!! "Charging is not supported with this accessory" suddenly happening CONSTANTLY with iphone 4
Suddenly without warning my IPhone 4 has been giving me a "charging is not supported with this accessory error" every time I plug it into ANY charging device. That means my car charger, USB to the PC... USB to a macbook pro... Directly to the wall with the included charger, etc. It doesn't matter. I guess I'm past the 1 year warranty so Apple is not any help. Essentially I'm supposed to accept that my $200 (with a contract) phone has a 1 year life span and that I should be completely fine with it becoming useless out of nowhere. Here's some facts.
#1 - It has nothing to do with 3rd party accessories. One day it was working... one day it wasn't.
#2 - I cleaned lint out of the charging port on the phone. That was the first thing I tried. I used compressed air to blow it out, I used a soft bristle tooth brush... It's lint free. It has nothing to do with lint. I understand this is the most likely cause of the problem.
#3 - When I plug it into a PC or macbook via USB, I'm able to access the IPhone 4 like I ALWAYS have. In other words, I can see pictures, I can back up the phone, I can restore the phone, I can transfer music, sync, etc. So this would presumably rule out the idea that it's the dock connector, right? Why would USB work, but the charging function will NOT work?
#4 - On that note, I was able to update the software to the latest version 5.1.1. That was one of the first things I tried. No dice. I still get the "charging not supported with this accessory" error literally every time I plug it in with a yellow triangle icon... Seen here for example: http://tapatalk.com/mu/4c5f44af-af20-d86c.jpg .
#5 - So since it's not charging, the phone inevitably dies. Here's the weird part... if I leave it plugged into the wall/pc/mac/car when it's dead... eventually it will charge enough to turn back on. But once it's back on... that **** error will pop back up, it will stop charging... and inevitably die again. So then... that would suggest that it actually IS capable of taking a charge... it's just that something in the software is preventing it from charging when the software is active, no? Am I off base here?
#6 - So I decided I'd take it to the genius bar to have them look at it. Right before I did that, I got the brilliant idea to try using an alcohol swab on the dock connector just to make sure it was super duper extra clean. Oddly enough, it suddenly started working without the error. It was working on every charger I tried. Wow. I thought I had fixed it. A day later it started happening again, though. Bizarre. I've tried the alcohol swab thing again and it didn't make a difference... maybe it was just a fluke.... the one day I take it to the Apple genius bar and it works. Go figure, right?
#7 - The only helpful thing the tech at the Apple Genius Bar was able to tell me was that the phone did NOT have any kind of water damage. That rules that out. No water damage in the charging dock OR the headphone jack. So there's that.
#8 - Since it's no longer under warranty... I took it upon myself to buy a replacement battery via Amazon.com and installed it myself. Didn't make a difference... still the same error.
What, if anything, can I try? Could it really be the dock connector? Should I try replacing the dock connector? Is there any software-related thing I can try? Has this happened to anyone else? Apple has essentially told me it's my problem. From my perspective... any product that randomly stops working a little over a year is a faulty product. I'm not pleased at all.Tried at least 6 different cables. It isn't the cable. All of them worked one day... then stopped working the next day. My girlfriend has an identical Iphone 4 and all of the cables still work for her.
Interesting point on the data and power using different pins. So your suggestion would be to replace the dock connector? Found this on Amazon: http://www.amazon.com/Apple-iPhone-dock-connector-cable/dp/B003UGVOO2/ref=sr_1_1 ?ie=UTF8&qid=1338277549&sr=8-1 ... and found a tutorial online: http://www.ifixit.com/Guide/Installing-iPhone-4-Dock-Connector/3147/1#.T8SG_sXWu -o ... Sounds like that might be my best bet here.
It's just odd to me that the phone gives me that error and refuses to charge... then inevitably dies. But once the phone is dead, it starts charging enough to actually turn back on. Isn't that slightly odd? -
Dear Ones,
I have Firefox 10.0.2. and OSX 10.6.8. and the latest PDF adobe reader, and still can not open with the browser PDF files.Can someone help,pls?Thanxsee if this is helpful : [http://support.mozilla.org/en-US/kb/Opening%20PDF%20files%20within%20Firefox Opening PDF files within Firefox]
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem. -
Has anyone else seen the "SharePoint is not supported with version 4.0.30319.18051" messages?
We are running SP 2010 service pack 2.
We are seeing the following messages on at least one of our farm machines. I was wondering whether others here have seen these messages and found a solution. The powershell ise was a running task, but not actually executing any code, etc.
When code was tried with it, the code appeared to be working as far as I could tell.
03/04/2014 15:25:11.28 powershell_ise.exe (0x162C) 0x15EC SharePoint Foundation
Topology d04h Monitorable Microsoft SharePoint is not supported with version
4.0.30319.18051 of the Microsoft .Net Runtime.
03/04/2014 15:25:11.28 powershell_ise.exe (0x162C) 0x15EC SharePoint Foundation
Topology 888j Medium System.PlatformNotSupportedException:
Microsoft SharePoint is not supported with version 4.0.30319.18051 of the Microsoft .Net Runtime. at Microsoft.SharePoint.Administration.SPConfigurationDatabase.get_Farm() at Microsoft.SharePoint.Administration.SPConfigurationDatabase.SPFileSystemCacheWatcher.OnChanged(Object
source, FileSystemEventArgs e)that appears to be doing the trick. I really appreciate your help.
It is weird - all that the kb recommends is changing the command line -version from "-version 2" to "-version 2.0".
Maybe you are looking for
-
Batch runs "Save As" instead of "Save For Web"
Hi, I recorded an action to use for batch automation which included: - resize image - Save For Web & Devices (to JPG medium setting) But when I try to run it, the Save As dialog box shows up after every image. Also, the image optimization is differe
-
Messages on iMac dont seem to be communicating with iMessanger on other devices
I just upgraded from SL to Mountain Lion and am trying to figure out how messenger works. I set it up with my apple ID and have it set to both my phone number and my email address, but the message on my imac are not showing up on my iphone. Followed
-
Cannot update 4.3.3 on mu ipad2. I Have internet explorer 9.
-
"Vertical Align Center" Text and a Shape
Hi designers, I wonder if anyone could give me a hand with aligning text and shapes? I would like to align a number to the center of a circle. "Horizontal Align Center" works well. "Vertical Align Center", however, does not yield the desired result.
-
Design Time Connection of SAP Server failure using TIBCO Designer
Hi All, While Connection to SAP Server using TIBCO Designer using Design Connection Configuration followed error we are facing. Connection Error. Unable to Create a Connection with the target application bdhn4973.na.pg.com using connection parameters