JFServer.exe fault in Windows 2008 server with Central V 5.7

I have an installation of Central 5.7 running 6 instances on Windows 2008 server 64 bit and have noticed that the six instances don't always come up when the machine is rebooted. Here is the error that it logs in the Central Log.
"Open of table 'C:\Users\Userid|Appdata\Local\Temp\JFX8A00.tmp' failed.
This also sometimes happens when I make changes to jobs in one of the instances and there seems to be no pattern wo what instances it happens in.
This behavior does not appear to happen with Central 5.7 running on XP or 2003 server.
Any thoughts on why this might be happening?

This is a recently known issue specific to Central on Windows 2008
Contact Adobe Support to obtain the patch. You can find their contact details in your support agreement.

Similar Messages

Windows 2008 server with a Z77A-GD65 m/b?

Hi,
I picked up a Z77A-GD65 last evening assuming I could install Windows 2008 server on it. Upon trying, the install DVD doesn't even see the hard drives.
Any suggestions? Is this m/b not compatible with Win 2008 servers?
Thanks!
--Ben

Try loading the AHCI drivers just like you would raid drivers.
(Intel Rapid Storage Drivers)
http://www.msi.com/product/mb/Z77A-GD65.html#/?div=Driver&os=Win7%2064
If you are trying to use SATA_7 or SATA_8 you will need to load the AS Media controller drivers:

Windows 2008 Server - Cannot run Active Directory Users and Computers

Hi,
I am running Windows 2008 Server with latest windows updates installed. Directory Services Role also.
I attempt to open Active Directory Users and Computers tool and I get a;
Microsoft Visual C++ Runtime Library error;
"The Application has requested the runtime to terminate it in a unusual way. Please contact the application's support team for more information"
I click ok, then get the following debug info;
Problem signature:
Problem Event Name: APPCRASH
Application Name: mmc.exe
Application Version: 6.0.6001.18000
Application Timestamp: 47919524
Fault Module Name: msvcrt.dll
Fault Module Version: 7.0.6001.18000
Fault Module Timestamp: 4791ad6b
Exception Code: 40000015
Exception Offset: 0000000000029b06
OS Version: 6.0.6001.2.1.0.272.7
Locale ID: 3081
Additional Information 1: 43aa
Additional Information 2: cf3a46656318492c1997480001b6b0e0
Additional Information 3: 3837
Additional Information 4: 92f72e0d0589ff77cef51e0a413aeff6
Read our privacy statement:
http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0409
If someone could please assist, it would be very much appreciated.
Regards
B

Hi,
To solidly troubleshoot this kind of issue, we need to debug dump file. A suggestion would be to contact Microsoft Customer Service and Support (CSS) via telephone so that a dedicated Support Professional can assist with your request.
To obtain the phone numbers for specific technology request please take a look at the web site listed below:
http://support.microsoft.com/default.aspx?scid=fh;EN-US;OfferProPhone#faq607
However, I am also glad to share my research.
Some third party applications may lead to this error. Please check if you install other third party applications on Windows server 2008?
Also, please follow the article below to perform necessary steps to see how it's going?
FIX: You receive an "invalid page fault in module MSVCRT.DLL" error message after you install the run-time libraries from Visual C++ 6.0
http://support.microsoft.com/kb/190536/en-us
Hope this helps.
Best wishes
Morgan Che

Siebel 7.8 Windows 2008 Server

All,
I am trying to install Siebel 7.8 on Windows 2008 server with SQL 2008 DB. I looked up the compatibility and it says something about Binary Compatibility Support:
[http://download.oracle.com/docs/cd/E11886_01/V7/CORE/SRSP_78/SRSP78_ServerEnv3.html#wp1015753]
I installed the Siebel Enterprise and Server and Database Server. However, it gave me no option to choose/install the required Siebel components.
When I install Siebel Web Server, I get an error:
unable to launch "E:\sea78SWEApp\bin\metabaseedit.exe "E:\sea78SWEApp\bin\ENU\eapps.mtb"" error code: "-2147221164"
and nothing gets created in IIS.
Please help!!

I can speak from personal experience.
I recently setup Siebel 7.8 on SQL 2008 R2 in our test environment. Everything works well with the database.
You can run siebel 7.8 without any issue, you don't need the 7.8.2 update, but I do recommend it for a production system
When you go to install siebel, you will have to run setup.exe with the compatibility mode setting of "Windows 2003 sp1"
Use the SNAC, MS Sql 2005 ODBC client on you application server and gateway. The native sql 2008 client / driver will NOT work with siebel.
As Always, siebel is 32-bit and requires the 32-bit version of server 2008 for the gateway and application server.
IE 8 will need to run in compatibility mode, in order to work with the we application.
Other than that,
Its identical to a windows 2003 installation :)

Bank Statement management in SAP B1 on a VMWare Windows 2008 server

Hi everybody,
One of our customer is using a VMWare Windows 2008 server with SAP B1.
Actual version of Business One is SBO 2007A PL 00 PL 15 (SQL Server 2005).
Since the installation of this server using VMWare, we encouter problems using the SAP B1 Integration Platform for the process of the bank statements.
Everything including bank statements transfer was working very fine on a "real" server before new implementation.
When trying to open the Integration Platform Control Center on the server, we now receive the following message regarding JAVA.
"JAVA Virtual Machine Launcher : could not find the main class : program will exit."
JAVA is well installed on the VMWare server.
We have searched for a solution on the Web and it seems that JAVA and VMWare are not compatible. Does anybody have any information about that ?
Does anybody already have this problem with Integration Platfom on VMWare server ?
Is there a solution to our problem ?
Thanks for all your contributions.
Best regards.
Michel

Hi Michel,
First of all, your PL is too low. AFAIK, the first supported PL for 2007A SP00 is PL30. You may upgrade your PL first to see if that is a bug or not.
Thanks,
Gordon

We installed the Acrobat Reader 11.0.09 on Citrix enable Windows 2008 server a month ago , it was working. starting from this weeke we are receiveing error mesaage AcroRD32.exe - application error (Instruction at 0x...bad8 bad referenced memory at

We installed the Acrobat Reader 11.0.09 on Citrix enable Windows 2008 server a month ago , it was working. starting from this weeke we are receiveing error mesaage AcroRD32.exe - application error (Instruction at 0x...bad8 bad referenced memory at 0x....bad8 The memory could not be written Click ok to terminate the program)
Instruction at 0x...bad8 bad referenced memory at 0x....bad8
The memory could not be written
Click ok to terminate the program

Hi SUBRAMANIAN,
Are you still facing this issue? It seems to be conflict to me.
Are you using any third party plugins with Acrobat? Try disabling and to use it again.
Regards,
Ajlan Huda.

Problem with 10.2.0.5 patch on Windows 2008 Server R2 64bit

Hello
I have HP server with Windows 2008 Server R2 64bit. I installed
latest 64-bit version of Oracle Database 10.2.0.4 and everything works fine and later installed the patch 10.2.0.5 (64 bits) as the Oracle maintains that with the R2 version of the system it is necessary to correct work.
Now, after uploading the patch database starts and closes
after about 15 minutes and my alert log file is changed to the binary version which do not see anything (means that after patch installation (10.2.0.5) the alert log file isn't normal text file and it looks like that:
Źýţ cśy iµ•eű .Ź ťy ťy Ř®y hčN)
You can read only the beginning and it's very large - 13 Mb after unpacking from ZIP.
Can anyone met with this configuration and knows how to solve
problem?
This is the link to my strange alert log file:
http://www.2shared.com/file/22MFap1V/alert_orcl.html
I attached my spfile.ora file too:
http://www.2shared.com/file/gUmID0fh/SPFILEORCL.html

Your alertlog is corrupted, it could be something about a virus or even a problem with disk drives. Have you scanned your server with anti-virus software? Have you scanned the disks?
Last questison: Have you upgraded your database after you installed the patch?
SQL> SHUTDOWN IMMEDIATE
SQL> STARTUP UPGRADE
SQL> SPOOL patch.log
SQL> @ORACLE_BASE\ORACLE_HOME\rdbms\admin\catupgrd.sql
SQL> SPOOL OFFIf not, please read the "readme" file which comes with patchset (do not just run the above commands without reading Oracle documention).
Best Regards,
Gokhan
If this question is answered, please mark appropriate posts as correct/helpful and the thread as closed. Thanks

Error: SAP installation of ERP Sr3 with ORACLE 10g on Windows 2008 server

Dear all,
while installaing SAP ERP SR3 with ORACLE 10g on windows 2008 server...
we are getting error as not support.
please confirm wether this version of OS is uspported or not.
thanking you in all,
by
Animesh

actualy we tried to change Oraparam.ini file in the installation folder...
edited ... windows= 5.0, 5.1, 6.0
we had entered 6.0
Yes - that is necessary.
and started ... but after starting we are getting ERROR like unKNOWN and installation popup (OUI popup) exiting with .. error popup.
Yes - because Oracle delivers its own Java version - which is too old to run on Windows 2008.
if you suggest us to use 2003 64 bit for temporaray .... purpose.
and is there any specified procedure to UPgrade OS.
like... DB should be updated before OS upgradation.
You can run 10.2.0.4 on Windows 2003 x64 nicely and upgrade to Windows 2008. Since there is no "upgrade" (it is the highest version supported) there´s no need to do anything.
The question you have to ask is:
Why do you need Windows 2008? Is there any technical implication?
Markus

Problem with update SCCM client to Sp1 CU3 on Windows 2008 server

Hi all,
I have problem with update SCCM client on Windows 2008 Server to 2012 Sp1 CU3. I have sent to deployment package with update (SP1 Cumulative Update 3 - server update) on four servers and after few minutes I have got in Monitoring\Deployment details four
this same errors in "Asset Details":
USER Message ID
Status type Description
NT\AUTHORITY\SYSTEM 1006
Error 3003
I love that types of error... which is har to find answer on google :-( I have tried but I haven't find any constructive :-( Did you met with something similar? Which log I should check (sorry - I'm still noob in SCCM2012) to update actual SCCM Client SP1
(5.00.7804.1000) to SP1 CU3 (5.00.7804.1400)?
Thank you.

I see in fodler with CU3 updates, are four packages:
- SP1 Cumulative update 3 - x64 client update
- SP1 Cumulative update 3 - x86 client update
- SP1 Cumulative update 3 - server update
- SP1 Cumulative update 3 - console update
It will be stupid but... maybe I should deploy x64 client update package?

Radeon Drivers problems with BootCamp Windows 2008 Server R2

Hello !! I have some troubles with BootCamp and Windows 2008 Server R2... I can't find any graphic drivers for my AMD Radeon HD 6490 !! Heeeelp please
(I Have a Macbook Pro i7)

Shoooryuken, did you ever get this problem resolved? I have thhe same issue...
I have the 2011 MacBook Pro 15" 2.0ghz Quad Core i7 with integrated Intel HD Graphics 3000 and AMD Radeon 6490M.
I just installed Windows Server 2008 R2 (Which is based on Windows 7) using Boot Camp. After I installed it, the I only have 3 resolution options, all of which are stretched. I checked the device manager and found that the Apple Instal DVD did not work and only a "Standard VGA Graphics Adapter" was installed. It also reports a whopping 16MB of graphics memory
I downloaded the "detect and install" driver utility from AMD (http://support.amd.com/us/gpudownload/Pages/index.aspx) and it detected my correct OS and downloaded something (driver maybe?). When I clicked install, I recieved this message: "AMD Catalyst Mobility cannot be downloaded due to incompatible hardware/software on your computer. Your computer does not contain a proper graphics adapter."
I don't really know why Windows does not detect the graphics card. Right now I am trying to install the Intel graphics drivers for the Intel HD 3000 integrated graphics... I will report back if I get the integrated graphics running...

Windows 2008 Server R2 - Service Pack 1 Failed to install

A few nights ago I deployed Service Pack 1 for Windows 2008 Server R2 x64. The update failed to install after 3 attempts using the Windows Update manager. After the third time I checked the system properties which states that SP1 is
installed, yet it never appeared to install successfully as my other server machine had a prompt stating the SP was installed successfully.
In update history it shows the 3 failed attempts with no successes. This morning I began running into memory errors which are impacting my 2 VM Ware sessions which in turn lock up my virtual machine so I am going to attempt to remove and reinstall
to see if this corrects my issue. By the way what triggered the install of SP1 is random reboots of my server. This is that unknown Kernal Power Error which I have yet to resolve. Some months my server randomly reboots one time and other
months 4-5x. That is neither here nor there, the point of this discussion is to resolve SP1.
I have tried to remove SP1 by means of Control Panel, Programs and Features, Installed Updates. So it shows the that the SP1 installed in multiple areas yet in the install history no signs of successful installation.
When trying to uninstall from Program and Features/Installed Updates section in control panel it cycles through like its going to uninstall, but after several minutes I receive the following error      Windows Update
An error has occurred. Not all of the updates were successfully uninstalled.
When trying to uninstall from the command prompt (as administrator) "wusa.exe /uninstall /kb:976932" I get the following popup            Windows Update Standalone Installer
Installer encountered an error: 0x80073712       The component store has been corrupted.
Now if I try and install through the network installer file name "windows6.1-KB976932-X64.exe" I get "Windows Server 2008 R2 Service Pack 1 is already installed"
I performed these steps in the order mentioned which I came across this "System Update Readiness Tool for Windows Server 2008 R2 x64 Edition (KB947821) [February 2011]" After applying this hotfix I went through the same steps as mentioned above with the
exact same results.
It is unfortuante I did not come across this hotfix before I attempted install SP1 as it appears as if this would have prepared the system for SP1 installation. Currently I am in limbo with a corrupt installation of SP1 and so far no means of uninstalling
short of a reinstallation or repair of the OS which I am not willing to do at this point in time.
If anyone has any suggestions please chime in and let me know what I can try. Thanks for all the support and hopefully this post will help others in the future.

Maybe a little bit late, but I was running almost same problem on a exchange server.
Scenario:
First attempt to Update the windows patches - excluded the patches from the last 2 months.
I was kind a new to this, and didnt noticed that Windows Service pack must have at least 8GB free disk space.(Recommended)
So the C:\ partition had less then 5 GB free disk space, and I started the updates.
All went well until Windows SP1 begun running to downloading and installing.
When the installer noticed there wasnt enough space, It stopped, it give the status Failed, en when scaling up the C:\partition with another 10GB more space, the C:\partition had 18GB free disk space.
Tried to Call up a new attemp to install the SP1... but with no succes to start the SP1 installation...
I tried to reinstall but the windows update didnt get offered again to install again or resume or anything to try again...
Maybe...it is handy for Mickysoft, to check before installing, so the install wont get corrupted, and can install when c:\ partition has enough disk space.
What was the trick:
1) Stop the windows Update Service
2) C:\Windows\SoftwareDistribution\DataStore - Delete content
3) C:\Windows\SoftwareDistribution\Download - Delete content
4) Windows update Service check if its runs again
5) Check again for windows updates - Check if Windows Server Service pack 1 is offered, and install reboot and youre good to go.
It works for me :) hopefully after 3 years you had found a solution, but since I was poping for a solution and found this article with no solution.
I tought it will be hopefull for others to respond to this article with a solution.
Kind regards,
Alexander Tjintjelaar
Micky soft noob

Windows 2008 Server R2 not loading Desktop

Hi All,
I have windows 2008 server R2 using as Database server.Today when i try to login it is showing two more user accounts in the login screen and i login to the server with administrator account but it was showing a blue screen(not blue screen error) with mouse
pointer.I press Ctrl+Alt+Del and open task manager>new task>desktop and click open its showing that "windows cannot access the specified device,path or file.You may not have the appropriate permissions to acess the item.

From cmd.exe session run SET then look for
USERNAME=Administrator
USERPROFILE=C:\Users\administrator
If you see USERPROFILE=C:\Users\administrator.000 (or similar) then the original local administrator profile was corrupt or otherwise orphaned.
In days past one could create a new account with local administrative rights, logon with new account, then after saving off docs, etc. from corrupt/abandoned profiles use
Control Panel|Users and Passwords and delete the old profile stores. Then when you next logon a new profile is created from an image in
\default user Have not tried this on anything newer vintage than server 2003 though.
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Windows 2008 Server Enterprise R2 x64 and Perc 4/dc SCSI driver issue

Hello all, this is the first time posting so please forgive me if this has been posted here before. I did try to search this issue but zero returns.
OK, I have a Dell PowerEdge 2900. I have just put a fresh install of MS Windows 2008 ENT. Server x64. I cannot seem to find a driver for the PERC 4/dc SCSI controller I have installed. I have been told the 2003 x64 driver would work so I attempted to install that driver but was unsuccessful. Then I was told by Dell that the driver should be native to the OS. Is the driver native to 2008 Server (or, supposed to be)? Does anyone have an answer as to where I might retrieve am driver of the controller if not? Anyway, thanks in advance

Hello,
I don't have a PowerEdge 2900, but I do have a PowerEdge 2850. I'm also just a regular bloke like yourself that just happened upon your post and after I figured this driver debacle out I registered to hopefully help.
The good thing is my PERC card is the same in the PE2850 as it is in your PE2900, as I'm utilizing a PERC 4/DC. I've also managed to run into the same issue you ran into(?) trying to load Windows 2008 Server Enterprise R2 (support for 32bit processors have been removed in R2... so no more x86 versions... my poor PE2650s never stood a chance with this OS).
I can tell you officially from my experience/research Windows Server Enterprise R2 does not have support built into it for the PERC 4/DC card.
However, I was able to download the Windows 2003 x64 driver from support.dell.com and make it work after much trial and error with newer releases of the PERC 4/DC driver that were not accepted by 2k8R2.
Here's the link: http://support.dell.com/support/downloads/download.aspx?c=us&cs=RC956904&l=en&s=hied&releaseid=R100373&SystemID=PWE_PNT_P3C_2850&servicetag=FBCLP61&os=WX64&osl=en&deviceid=6396&devlib=0&typecnt=0&vercnt=1&catid=-1&impid=-1&formatcnt=3&libid=35&fileid=129549
File name (incase Dell moves it on you guys) is "perc-w2k3-6.46.3.64-A01.exe", date released 6/9/2005, build version 6.46.3.64, and the Dell revision number is A01.
Even though it states the driver is for the LSI Logic PERC 4e/Si it's sort of a mega pack including many other drivers such as the PERC 4/DC. This was much relief because I was thinking I would need to stick with Windows 2008 until I found this driver for Windows 2008 R2. :)
What I did was:
1) Downloaded the driver and extracted it to a USB drive.
2) Booted-up via the Win2k8R2 CD and when it got to the screen where it asked to install to a partition and didn't show me a partition to install Win2k8R2 to I selected the option to load a driver.
3) From the load driver option I just browsed to the directory where I extracted the files and selected that directory. If the "hide devices that are not compatible" option is selected (normally on by default) it will show you the proper driver.
4) Select the PERC 4/DC driver and then setup your partitions the way you would like them!
From there you should be able to boot into the OS... and really have some fun.
Now you have the power... I guess the choice is yours to R2 or not to R2... that is the real question. :)
Enjoy!
Dave
Thanks and this worked for a Power edge 1800, PERC 4/DC as well. Kukan

Error 0x80070490 trying to launch VM without SCVMM on Windows 2008 Server R2

Hello everybody,
I get a weird issue trying to launch a VM.
This is the current situation : I get a server, Windows 2008 R2. I've only install Hyper-V and Failover Cluster. I can create a VM but when I try to launch it, I get an error message into a popup (translated from french) : "The application encountered
an error during modification of 'vm_name' state". "'vm_name' could not be initialize". "Could not initialize machine remoting system. Error 'Element not found'. (0x80070490). "Could not find a usable certificate. Error: 'Element not found'. (0x80070490)."
So, I'm unable to launch my vm's.
I'm not using SCVMM yet. I want to resolve this issue before.
I read some articles and posts about SCVMM certificate issue but I'm not using SCVMM.
More fun, I read articles about this issue but on Windows 2008 Server (not R2) : problem resolved by a fix, unapplicable on my Windows 2008 R2 :)
I'm totalyblocked and ain't got no idea how I can resolve it.
If someone gets I idea ...
Cheers,
Nicolas

Environment: Windows 8.1 in an Active Directory Domain (2012R2) with MS Certficates Services support NAP/Health Registry, etc.
Error: Attempts to start a Hyper-V VM on a machine generates the error message Error 0x80070490 trying to launch VM:
"'vm_name' could not be initialize". "Could not initialize machine remoting system. Error 'Element not found'. (0x80070490). "Could not find a usable certificate. Error: 'Element not found'. (0x80070490)."
Note:
VMM can manage other Hyper-V servers in environment from same machine, just not local machine.
VMM on remote machine generates same error message when attempting to manage new VM machine
Certificates - Service (Hyper-V Virtual Machine Management) on Local Computer shows 0 certificates under vmms\Personal
Fixes Attempted and Failed except for #5!
1) hotfix directly: Windows6.0-KB967902-x64.msu -> Failed: 0x80096002, Windows Update Standalone Installer. The certificate for the signer of the message is invalid or not found.
2) hotfix via pkgmgr: PkgMgr.exe has been deprecated. Please update scripts to use DISM.exe. 0x80070307
3) Reset Certificates:
Start > Run > MMC
Add the Certificates Snap-In
Select Service Account
Under the Select Account to Manager, select Hyper-V Image Management Service
Complete the Snap-In Wizard
Expand the Certificates under Personal Category
Notice the certificate generated has been created ‘for the future’ (assuming you’re suppose to revert the date & time to 2010, the certificate should display as invalid because it was created at 2013)
Delete the Certificate(s)
Go to the Services Console and Restart all Hyper-V Services
Result: No certificate auto generated
4) Uninstall / reinstall hyper-v service and management service addons from Windows features.
5) ‎did the following from http://technet.microsoft.com/en-us/library/ff935311(v=ws.10).aspx (WORKED!!! -> Note, their PS script has an error, add a dash(-) before the word recurse)
reg add "HKLM\Software\Microsoft\Windows NT\CurrentVersion\Virtualization" /v "DisableSelfSignedCertificateGeneration" /f /t REG_QWORD /d 1
24 ca 36 b5 bd 6d ef 7e eb aa a5 74 df e5 fd 41 ef ab 1c 29
$certs = dir cert:\ -recurse | ? { $_.Thumbprint -eq "24ca36b5bd6def7eebaaa574dfe5fd41efab1c29" }
$cert = @($certs)[0]
$location = $cert.PrivateKey.CspKeyContainerInfo.UniqueKeyContainerName
$folderlocation = gc env:ALLUSERSPROFILE
$folderlocation = $folderlocation + "\Microsoft\Crypto\RSA\MachineKeys\"
$filelocation = $folderlocation + $location
icacls $filelocation /grant "*S-1-5-83-0:(R)"

Function sequence error. in 64bit Windows 2008 Server.

Hi All,
Pardon me if the posting is not in the correct group.
I am migrating my application from 32bit(Windows 2003 Server) to 64bit (Windows 2008 Server R2).
I am getting the following while trying to execute a SQL command
Encountered ODBC error -1: S1010, 0, [Microsoft][ODBC Driver Manager] Function sequence error .
Basically internal function call is SQLExecute() function call. This works perfectly for Windows 2003 Server 32bit. I tried the command execute at the background from the command prompt and it is working.
I checked the squence of call.We have two consecutive SQLBindParameter function call and then we call SQLExecute. Is this sequence incorrect in case of 64bit? I also checked the return code given by SQLExecute which is 99.
Any help or suggestion would be very much appreciated.
Thanks,
-R

Hi Teun,
Yes i have build the addon & installer with x86. I am using Interop.SAPbouiCOM.dll , Interop.SAPbouiCOM.dll, System.dll , System.XML.dll.
I have not specified the relative path in code as such but iam loading my forms Load batch action i don't know if it ok in this scenario or not.
Building the Solution/Project is Successful without any warning.
While debugging it on my server it gives the same error "Object Reference Not Set to an Instance of an Object".
Debug Out put last errors are as follows:
A first chance exception of type 'System.IndexOutOfRangeException' occurred in mscorlib.dll
'TAMPA800.exe': Loaded 'C:\Windows\SysWOW64\sxs.dll'
First-chance exception at 0x76afe124 in TAMPA800.exe: Microsoft C++ exception: EEMessageException at memory location 0x0036ecec..
A first chance exception of type 'System.IO.FileNotFoundException' occurred in TAMPA800.exe
A first chance exception of type 'System.NullReferenceException' occurred in TAMPA800.exe
The thread 'Win32 Thread' (0x460) has exited with code 0 (0x0).
The thread 'Win32 Thread' (0xdb8) has exited with code 0 (0x0).
The thread 'Win32 Thread' (0xfdc) has exited with code 0 (0x0).
The thread 'Win32 Thread' (0xfb4) has exited with code 0 (0x0).
The thread 'Win32 Thread' (0xdc8) has exited with code 0 (0x0).
The thread 'Win32 Thread' (0xe04) has exited with code 0 (0x0).
The program '[3872] TAMPA800.exe: Managed' has exited with code 0 (0x0).
The program '[3872] TAMPA800.exe: Native' has exited with code 0 (0x0).
Regards
John

JFServer.exe fault in Windows 2008 server with Central V 5.7

Similar Messages

Maybe you are looking for