JHeadStart Forms2ADF Generation Process - Issues

Hi
I am trying to migrate my Forms to ADF using JHeadStart.
I have installed JDeveloper 11.1.2.2.0 and JHeadStart 11.1.2
I am trying to generate Business Components in the Model Project ..
I have chosen New (Under Buisness Tier) --> ADF Business Components
there is no option for JHeadStart Forms2ADF Generator as expected..
I could not see this JHeadStart Forms2ADF Generator wizard option anywhere else inside JDeveloper.
I am trying to follow Demo 2 mentioned in the below page ...
http://www.oracle.com/technetwork/developer-tools/jheadstart/overview/index.html
Thanks

I am sorry, we have no special arrangements for students.
This forum post might help you to position Forms2ADF Generator correctly:
Re: Any example customer has migrated from Oralce Forms to ADF?
Steven Davelaar,
JHeadstart team.

Similar Messages

JHeadStart Forms 2 ADF Generation Process - Issues

Hi
I am trying to migrate my Forms to ADF using JHeadStart.
I have installed JDeveloper 11.1.1.2.0 and JHeadStart jhs11.1.1.2.37
It says Oracle JHeadStart 11.1.1.2.37 successfully installed !
I am trying to generate Business Components in the Model Project ..
I have chosen New (Under Buisness Tier) --> ADF Business Components
there is no option for JHeadStart Forms2ADF Generator as expected..
I could not see this JHeadStart Forms2ADF Generator wizard option anywhere else inside JDeveloper.
FYI, I am trying to follow Demo 2 mentioned in the below page ...
http://www.oracle.com/technetwork/developer-tools/jheadstart/overview/index.html
Thanks,
Ram

jdev 11.1.1.2 is not certified with jheadstart.
Timeframe for JHeadstart 11.1.2
JHeadStart Compatibility Matrix

I dont see Jheadstart Forms2ADF in my Jdeveloper 11g

Hi am very new to Jdeveloper. My requirement is, I want to convert a Oracle form to J2EE. I have downloaded and installed the Jdeveloper 11g. And then I selected the application FUSION WEB APPLICATION(ADF). And when I click on the Model -> New-> Business Tier, I am unable to see Jheadstart forms2ADF tool.
Someone Please help me how to include this tool and if possible provide me steps with converting forms to J2EE.
Note: I followed the demo given in Oracle site. But no use.
Edited by: Karthik GJ on Aug 1, 2010 8:44 PM

Karthik,
You can download an evaluation version of JHeadstart 11g through JDeveloper Check for Updates, but that evaluation version does not include the Forms2ADF Generator (see http://blogs.oracle.com/jheadstart/2010/04/jheadstart_11g_evaluation_vers.html ).
Licensed JHeadstart customers can download the fully functional version of JHeadstart through the Oracle Consulting Supplement Option at http://cso.oracle.com. If you want to purchase JHeadstart licenses, please see http://www.oracle.com/technology/products/jheadstart/files/jheadstart_faq.html#BM3 and contact your local Oracle Consulting representative.
Hope this helps,
Sandra Muller
JHeadstart Team

Automating a report generation process

Hello guys!
I just took on a new role in a company which requires me to deal with SAP BEx Analyzer.
I'm completely new to this, but having gone through the report generation process, I feel the method I'm using is horribly tedious and I believe there should be a way to automate the process since it's a recurring monthly procedure.
What I have to do currently to get the report is:
1. Launch SAP Logon
2. Filter the Connection which i want to find (i'll call it "PQI").
3. Key in my Username, Password and Language
4. Select the third container in the folder (i'll call it "03")
5. After I open 03, it launches Excel with BEx Analyzer add in initialized. The report is currently empty
6. Select Change Variable Values, fill in Fiscal Year, Month and Accounting Area.
7. After which it will take like 15minutes to query, and a about 16,000 ++ rows are generated.
    Problem #1: The format isn't good, i have to right click on every cell that writes "Result" with yellow highlight and under it's properties I have to select         "Result Rows" > "Always Suppress". (Ref1.PNG)
     This is horribly painful considering I have to wait about 1 minute for each response (it's very slow). I have to repeat this for every yellow column in the
     report. Can this be automated or done in 1 step?
8. After doing so for all rows, I have to right click the table and select "Query Properties" and shift all the Free Characteristics (about 10) to "Rows".
     BUT, I can't do all at once, it will say "out of memory" and crash. I have to do so 2-3 rows at a time. Each time it'll take about 10-15 minutes to
     populate. It's very painful.
9. After it's all done, i have to repeat step 7 again, which is to Suppress all result rows (Ref2.PNG)
10.Followed by which I have to go to Query Properties > Display Options > Uncheck "supress repeated key values"
11. When that is done I have to generate a PivotTable on the data.
I have to repeat the same steps on a monthly basis.
Is there a way I can script it to run the process for me monthly? Or any other way to make it less tedious?
Thanks so much for any input or suggestion guys!
Warmest Regards
Brandon

Suppressing Result Rows can be done in Query designer itself for one time. You need not to do after you get the report every time.
If you always expect some 10 free chars constantly, i suggest you to insert them in Rows pane in Query designer but not in Analyzer. So that your report layout will be taking care with all settings what you want to do after the report generates in Excel. I mean you will get desired layout when you run the report first time itself.
Suppress repeated key values also can be done in Query designer itself one time.
By doing above, your report execution will not be tedious and it will be minimizing your efforts.
Over all, What I have understood is, you are doing all sorts of settings in Analyzer after getting such huge volume of data, by which it gives you crash error.
With all above steps, you can run your report with all pre-defined settings.

Alert generation process for failed explorer infospaces

Hi, I am looking for an alert or mail generation process by which the Business Objects Administrator will get information about the explorer info space for which indexing has been failed , is there any way( script, event viewer) by which and alert will be send to Administrator inbox which contains the name of failed info space, Basically want to know the best practice to monitor daily info space indexing which saves time and effort.
Environment is SAP BO BI platform 4.0 SP08,
BO Explorer 4.0 SP08,
OS is Windows 2008.

Hello Isaac,
Have you tried typing in a specific system ID (e.g. DEV, PRD)? Does it then work? What Support Pack level are you running?
Please see OSS Note 1435605 and the related notes to it. It may help.
Best Regards, Dylan

Process chains: error when including CVC generation process type

hello all !
I have a Pc that loads data from custom extractor into a Icube.
next triggers Generate Characteristic combination which never executes. Status remains active but no "completed succesfully" (yellow triangle) in monitor of pc.
When I run it alone the CVC generation process types executes OK...??!!!
My sequence is Delete Index from cube ---> Load IP --> Atribute change run ---> Create Index --> Delete overlapping request (up to hear loads oK although status never becomes green '??)
final step is a CVC generation + adjust time series process type.
Does any of you know why the error ? and how to help solving it out ?
appreciate all yur comments

Hi Samir,
I guess you can directly go to RSA1->Source Systems.Rt click and Transfer Global Settings then Delete the Red Request and Go to the Particular Process chain and do a Repeat/Repair.
You can try repairing it...
Rest of your question is not clear.... Give me ur number, will call you, then we will discuss
Rgrds,
Habeeb

Ipod nano 7th generation having issues with the UI. Out of box everything worked great. Once I snyc the device and it finished, the UI becomes unuesable. You have to double tap every icon in order to open music, videos, etc. I cannot swipe to the second

ipod nano 7th generation having issues with the UI. Out of box everything worked great. Once I snyc the device and it finished, the UI becomes unuesable. You have to double tap every icon in order to open music, videos, etc. I cannot swipe to the second page of icons, black box appears around an icon and then switches to a different one anytime I swipe. A box even appears around the time and battery power. iPod & iTunes are both updated. What is the FIX on this issue?

I had this problem as well. This is what I found by searching online. I tried the fix on my nano 7th gen and it worked. I hope this helps you. Make sure to use two fingers for sliding and double-click the icons to get into settings. Good luck.
It would seem that Voiceover has been enabled on your iPod Nano. The following article contains information regarding Voiceover, and how to disable it once it's been enabled.
iPod nano (6th generation and later): How to use VoiceOver
http://support.apple.com/kb/HT4317
To turn off VoiceOver on iPod nano using VoiceOver gestures
From the Home Screen, swipe right or left with two fingers until you see or hear "Page 2 of 2" on iPod nano (7th generation) or "Settings" on iPod (6th generation).
If the icons have been rearranged, or if there are more than four Home screens, you may hear something different.
Slide one finger around the screen until you hear Settings.
Double-tap to open Settings.
Slide your finger up or down the screen until you see or hear General, then double- tap.
Slide your finger up or down the screen until you see or hear Accessibility, then double-tap.
Slide your finger up or down the screen until you see or hear VoiceOver, then double-tap.
Double-tap when you hear "VoiceOver switch button on."
You'll hear "VoiceOver off" to confirm the setting. Now you can use standard gestures to control iPod nano.
Note: You can also turn off VoiceOver by resetting your iPod.

Max processes issue (but not a processes parameter issue)

I am having ora-0020 max processes issue, but my max processes is set to 550, and I have a highwater mark of 132 processes
select * from v$resource_limit
where resource_name = 'processes';
RESOURCE_NAME CURRENT_UTILIZATION MAX_UTILIZATION INITIAL_ALLOCATION LIMIT_VALUE
processes 52 132 550 550
This is a 2 node RAC cluster, and this only happens on one of the nodes. Anyone every see anything like this ?? It looks like some sort of leak with process handles or something.

This does seem quite strange. What version are you running?
ORA-0020 does seem to be a problem at the instance level, not the underlying O/S.
$oerr ora 20
00020, 00000, "maximum number of processes (%s) exceeded"
// *Cause: All process state objects are in use.
// *Action: Increase the value of the PROCESSES initialization parameter.If the problem was at the O/S level, I'd expect an ORA-12500, "TNS:listener failed to start a dedicated server process".
-Mark

Employee number generation process

Hi All
Please guide me how to change an employee number generation process which is already set as automatic to manual and vice-e-versa ?
Please help.

Welcome to the forums !
Pl post details of OS, database and EBS versions. Pl see if these MOS Docs can help
How to Change Employee Numbering from Manual to Automatic?          (Doc ID 292257.1)
Is it Possible to Update Generate Employee Number Method From Automatic to Manual?          (Doc ID 393827.1)
Unable to Switch From Auto to Manual for Employee Number Generation in Shared Hr          (Doc ID 452044.1)
How to control automatic employee numbering?          (Doc ID 473065.1)
Need To Change The Employee Numbering From Automatic To Manual          (Doc ID 291634.1)
More information will be available in the HR Implementation Guides for your EBS version at http://www.oracle.com/technetwork/documentation/applications-167706.html
HTH
Srini

App. generation process using JHeadstart!?

Hi! I want to know if I understand correctly the process of developing app. with JHeadstart (see, - http://my.jetscreenshot.com/2677/20111006-nnjj-66kb). Based on this diagram I had written the process below:
1. First of all, we create ADF BC using JDeveloper Wizard.
2. Then we Enable JHeadstart on the CV Project that creates App. Definition file.
3. Then we create JHeadstart Service Definition (ADF BC metadata file) FROM created BC.
4. Using this ADF metadata (Service Definition) in App. Definition Editor we GENERATE application that uses templates.
5. Generator using templates generates necessary files JSF, JSP; JSF+ADFc; ADF Model, Data Bindings, Data Controls.
Am I right, I described app. developing process in JHS tool correctly? If no, then say where I am wrong?
Hope for Your answers, best regards, Debuger.
Edited by: Debuger on Oct 6, 2011 1:49 AM
Edited by: Debuger on Oct 6, 2011 1:50 AM

That is correct.
For more info:
- Jheadstart Tutorial: http://download.oracle.com/consulting/jhstutorial1111.pdf
- JHeadstart Developers guide: http://download.oracle.com/consulting/jhsdevguide1111.pdf
Steven Davelaar,
JHeadstart team.

Third Party Process Issue

Hello Friends,
Need Your Inputs for below issue"
in third party process: SO is created with 2 line items, -->PR-->PO--> Vendor delivers only 1 item and MIRO is done for it,
But
During Creation of Customer invoice Both Line items are considered in the Invoice(F2)
1st line item with the Value of X Rs, and 2nd Line item with zero value ( as there is no delivery done to customer and hence no invoice via MIRO)
Requirement is:
The 2nd Line item should not be considered at all during Customer invoice creation.
Item cate used is TAS with billing relevance F (i,e standard config)
Kinldy help
regards

hello srinu..
SO is created with 2 line items, PR is auto created. 1 PO is created (with 2 line items)
MIRO is done w.r.t PO line item 10 only,
then when i create customer invoice from SO i get 2 line items, for 1st line item there is value populated. 2nd line item has zero value,
The requirement is that if there is no Processing of SO for line item 2 ,, then it should not be populated in the customer invoice.
Regards

Fact Sheet generation - CL_CRM_GENIL_CONTAINER_OBJECT issue

Hi Guys,
We are utilizing functionality of an Activity Management to schedule appointments using Activity Scheduling and Standalone appointment creation as well. We did use automatic Fact Sheet attachments to the appointments.
We introduced an ad hoc generation of PDF Fact sheet attachments into the appointments. We are testing our custom solution but we experienced one issue caused by SAP standard code.
Let me summarize our settings first
1.We turn off automatic FS generation in IMG CRM->Transactions->Settings for activities->Attach Fact Sheet to activities
(Role)G:ZZ:CRM1:SLS_USER; (Trans.Type)Z100; (Short Descriptio)Visit; (Language)EN; (AttchAutom)blank; (AttachMan) flag
2.We do use custom smartform ZCRM_FACTSHEET that is a copy of CRM_ACC_ACCOUNT_OVERVIEW_PRN
3. We created new class ZCL_UIU_PRN_ACCOUNT as a copy of CL_UIU_PRN_ACCOUNT
4. in View CRMV_PRN_CONTROL we have maintained following entries (Role)G:ZZ:CRM1:SLS_USER; (External Object Name)BuilHeader; (Form name) ZCRM_FACTSHEET; (Class/Interface)ZCL_UIU_PRN_ACCOUNT; (View) blank
5. in cluster CRMVC_BUIL_PRT we have maintaned following Related objects ro (Role)G:ZZ:CRM1:SLS_USER and (Ext. Object Name) BuilHeader
(External Object Name)BuilActivity-(Field name)ACTIVITIES; BuilAddress - ADDRESS_OVERVIEW; BuilContactPerson - CONTACTS; BuilInteractionHistory - HISTORY; BuilRelationship - RELATION_TYPES; BuilSalesArrangement - SALES_AREAS
Our custom program ZFCRM_CREATE_FACT_SHEET is basically selecting relevant appointments; Reading information about main partner using FM CRM_PARTNER_READ_OW and calling FM CRM_UIU_BP_PRINT_BACKGROUND. All export parameter are properly filled in.
This FM is basically calling our Z class ZCL_UIU_PRN_ACCOUNT based on above customizing. For simplification reasons imagine that ZCL_UIU_PRN_ACCOUNT is exact copy of standard SAP class CL_UIU_PRN_ACCOUNT where CL_UIU_PRN_ACCOUNT is its superclass
The issue is with the method COLLECT_DATA and section of the code
lr_collection = lr_buil_entity->get_related_entities(
iv_relation_name = <ls_model>-relation_name ).
that returns data for internal tables lt_activities(open activities) and lt_history(closed activities). If we have scenario when we have 3 open and 8 closed activities:
a. When I generate the Fact Sheet from an Account directly in Web UI CL_CRM_BOL_CORE->get_related_entities is returning 3 records for lt_activities(open activities) and 8 lt_history(closed activities).
b. When I called it from our Z program the CL_CRM_BOL_CORE->get_related_entities is returning 11 records for lt_activities(open activities) and 11 lt_history(closed activities). It means mixed bag. And this is the issue.
I did analyze the standard SAP code and the section containing below
code is responsible for the mismatch
try to read children
if IV_RELATION_NAME is initial.
if IV_OWNED_ONLY = ABAP_TRUE.
LV_OBJ_LIST = IV_ENTITY->CONTAINER_PROXY-
>IF_GENIL_CONTAINER_OBJECT~GET_OWNED_CHILDREN( IV_AS_COPY = TRUE ).
else.
LV_OBJ_LIST = IV_ENTITY->CONTAINER_PROXY-
>IF_GENIL_CONTAINER_OBJECT~GET_CHILDREN( IV_AS_COPY = TRUE ).
endif.
elseif LV_MODE ne CL_CRM_BOL_ENTITY=>BYPASSING_BUFFER.
get relation state
>>this code>> LV_OBJ_LIST = IV_ENTITY->CONTAINER_PROXY-
>IF_GENIL_CONTAINER_OBJECT~GET_RELATION( IV_RELATION_NAME =
IV_RELATION_NAME
IV_AS_COPY = TRUE ).
read table IV_ENTITY->MY_MANAGER_ENTRY->RELATIONS with table key
RELATION_NAME = IV_RELATION_NAME
assigning
<REL_STATE>.
endif.
CL_CRM_GENIL_CONTAINER_OBJLISTCP->CONSTRUCTOR
data: LS_RELATION type GTYPE_RELATION,
LV_PARENT type ref to CL_CRM_GENIL_CONTAINER_OBJECT,
LV_ENTRY type ref to IF_GENIL_CONTAINER_OBJECT,
LV_CHILD_PROXY type ref to CL_CRM_GENIL_CONTAINER_OBJECT.
field-symbols: <REL> type CRMT_GENIL_CONT_RELAT
>>this code>> read table IV_PARENT_DATA_REF->RELATIONS assigning <REL> with table key RELATION_NAME = IS_FILTER-RELATION_NAME.
Table IV_PARENT_DATA_REF->RELATIONS is not filled for scenario b. at all. It is filled for scenario a. For our scenario b. it is missing relationships and that's the reason why we got mixed activities in BuilActivityRel and BuilHistoryRel..
Did you come across similar bug or do you know which note could potentially resolve this issue?
Thank you in advance.
-Milan

You might have to put breakpoint in function module CRM_UIU_BP_PRINT_BACKGROUND
Check the values in parameter - IT_BOL_RELATION
Also check values returned from querying table crmc_prn_contr2 (its at line 76 in our system).
Thanks,
Alwyn

Report/Process Issue

Getting close to finishing this project but ran into a new issue. When the user performs a search, a report (non-interactive) is generated and displays a Cart icon if the item is In; this is also a link to add the item to your cart for ordering. The link takes the user to the Cart page, and makes a Request for the ADDCART process, which is an conditional On Demand process loading before the header to fire an Application Process ADDTOCART, based on two values set in the same link.
However, the process isn't running at all. The instructions in the ADDTOCART process are used on another page, so we know the commands are correct, but the tables aren't updated. Here's the link from the report field:
SELECT Case CODATA_INDEX.STATUS
   WHEN 'In' then '<a_href="f?p=&APP_ID.:11:&SESSION.:ADDCART:::P5_ITEM,P5_TAX:'||ITEMCODE||','||TAXID||'">
    <img src="#APP_IMAGES#order_i.gif"></a>'
   ELSE Null
END as "CART", ...The link takes the user to Page 11 correctly, but there's no indication it has even attempted to execute the ADDCART process. The P5 variables are set as directed, but strangely the process doesn't appear to be called. Any suggestions?
(Note: We're running ApEx 4.0 on IE)

I ran Debug on the link but didn't see anything that stood out. Also, I'm not sure how to create a button within the Report (I found myself wishing I could do that when making the original report!), but I'm open to suggestions...
Meanwhile, I've got a recreation of the problem set up on apex.oracle.com
Workspace: CPATE
Username: TESTER
Pass: testing
On the Page 2, you'll see the report with the cart icon described in the original post. Clicking on the links next to it takes you to Page 3, the Details page, and from there you can add an item to the cart.
However, when you click the cart icon on Page 2, it goes to page 4 and assigns the values as directed, but doesn't execute the ADDCART page process (which should be executing the ADDTOCART application process).

IPod Touch 1G (1st Generation) Battery Issue

Hello. I realize there has been a ton of conversation about battery life on the Touch - so much so that it makes it difficult to search through in the Forum. So here is my battery problem. Recently, I updated to the latest 3.1.3 firmware on my wife's iPod Touch. The other day I noticed that the iPod's battery only lasted about 4 or 5 hours and all we were doing was listening to music (through the headphone port). It had a full charge when we started and we just queued up a large playlist (NOT Pandora or anything streaming) and let it play. We did, however, have wifi on. Originally, I thought it was the battery going bad and started to look into replacement. First though, I ran some tests. Here they are in chronological order:
1. - Fully charged iPod, all apps installed, and wifi OFF. I played videos from the iPod for 5.5 hours straight (with auto dimming turned on). Pretty impressive. Must not be a bad battery.
2. - Fully charged iPod, deleted all non-Apple apps, and wifi ON. There were 2 email accounts and a Google calendar account set to fetch, but push was turned on in the main settings. After leaving sit (in sleep mode) for 2 hours, the battery was at 97%. Still pretty good.
3. - Fully charged iPod, wifi ON, with the following apps installed - Remote, Pandora, Facebook, Mobile Air Mouse Pro, Last.fm, Paper Toss (free version), Evernote, Google (apps), and Accura Precision Battery Monitoring. These are probably my most essential apps and most (if not all) are from large companies with a wide user base (assumed more reliable). I left it sit over night (in sleep mode) for 10 hours and had 60% battery life left in the morning. Something is draining the battery here.
So, it appears to have something to do with wifi and/or my apps. My understanding is that the iPod Touch is supposed to power down wifi while in sleep mode. Is this correct? Could it be a bug with the new firmware? I feel like this is a recent phenomenon with the iPod (don't remember ever having such poor battery life). I would just turn wifi off when not in use, but to me that seems like an unnecessary hassle. I mean, isn't wifi one of the main points of having an iPod Touch? Is anyone else having this issue with the latest firmware and similar apps installed? Any help is appreciated. Thanks.

I got my 32 gb 1st gen ipod touch in 2007. It has been used non stop since then, in january 2010 I started to notice that the battery was not lasting as it should (19 hours). in 2008 the battery still lasted for 29 hours of non tsop music (no wifi of course).
I got the battery replaced and the battery is behaving as it should (29 hours of non stop music playback).
as the other poster commented. if you use wifi continuously, this will die quicker. The same with games, since the hardware in the 1st gen is not as efficient as in the later generations.
i would say first disable wifi and test just continuous music playback and see if you get the advertised 22 hours of battery life. if you do nto get that then it is time for a new battery...

Ipod Touch 5th generation sync issues over storage

Hi
I have a 64GB ipod touch 5th generation ipod touch. It (and itunes) has the latest software.
The issue is that I am trying to sync my music (I have bought new songs and changed playlists) and itunes states there isnt enough space on ipod touch. However, my music collection, and the ipod own storage suggests that the music only takes 50% of the available storage.
I am the point of jacking in the ipod touch now as this is a regular occurrence.
Any help on overcoming this is appreciated.
Lee

- First verify you have the right items checked to syn so that you are not syncing more than you think
- Next
Connect the iPod to your computer and look at the storage used by the various categories as shown in the colored bargarph in iTunes.
Come back with the results.
An "other" larger than about 1 1/2 GB indicates corrupted files.
What is the Other on my iPhone and How to Remove It
What is "Other" and What Can I Do About It?
Next, usually restoring from backup eliminated the corrupted files. However, sometimes restoring to factory settings/new iPod is required.
To restore from backup see:
iOS: How to back up
To restore to factory settings/new iPod see:
iTunes: Restoring iOS software

JHeadStart Forms2ADF Generation Process - Issues

Similar Messages

Maybe you are looking for