[JHS 10.1.3.0.59] Error when generating Group with Display fields

Do you already know this error in JAG when generating groups that contain items with display type 'display field'? Or am I doing anything wrong?
[LovOrganizationTable.jspx, default/item/table/tableDisplayField.vm] Velocity log [error] ResourceManager : unable to find resource 'default/item/table/tableDisplayField.vm' in any resource loader.
Toine

Toine,
Thanks for reporting, we should remove displayField from the list of dislay types. If you want a read-only field in 10.1.3, you can choose the proper display type, and then set "Insert Allowed" and "Update Allowed" properties to false.
Steven Davelaar,
JHeadstart Team.

Similar Messages

Error when generating the report in Production Server

Hi,
I have created one infoset query in Development server of my client. It is working fine there. I had transported the request containg this query to Production server. But whenever I am trying to generate report using this query in Production server it is giving an error message
"Error when generating the report".
I am not getting what 's problem.
Samriddhi

Samriddhi,
Genarally its not suggested to transport Queries. Should be able to create Queries directly Production. There might be diferences between your Development and Production versions.
Thanks.

Error When generating dataprovider

HI ,
i get an error message while executing a query in rsrt.
"Error When generating dataprovider
Notification Number BRAIN 282 "
require help in this regard,
Rakesh.

By best approach in that case is trial and error.
Copy that query to a new one and change it step by step (creating it simpler, by removing key figures and characteristics) executing it in each step until you don't find the error. There you can see what is causing that error.
Diogo.

Error when generating the report (see long text), Message no. AQ_AD_HOC221

Hi All,
I am facing a peculiar problem while executing an infoset query.I have created 2 customized fields Compa-ratio and PIR in infotype 0008 in an infoset.I have coded in these additional fields.
When I execute a query using 1 of these customized fields the report is generated correctly.But when I put both the fields in the output the report shows an error "Error when generating the report (see long text)". The message# associated with this errAQ_AD_HOC221.
I have also checked the data types and the references. Nothing seems to be wrong here.
Does anybody has any clue about this ?
Kajal

Hi Bernd,
I had a look at those notes. But the information provided did'nt prove to be helpful. I found out the problem. I was using the same local variable for both the fields in their code. This generated the error. This error is a very generic one and does'nt help in finding out what exactly is the problem.
I changed the other local variable and it started working. When I was using the same variable that time I did'nt forget to clear the values but the query still generated the error.
Anyways thanks a lot for the reply.
Kajal

Error when opening document with ECL control: INVALID_DATA

Hi Gurus,
I've tried to search the net for this problem but could not find anything and I'm stuck now.
Description:
we're using ECL to view attached documents (to POs etc.) which are stored through ArchiveLink on the content repository.
when we try to open this document, time-to-time we get following error:
Error when opening document with ECL control: INVALID_DATA
Message no. SDV004
by time-to-time I mean that when we try to open same attachment again it opens successfully (sometimes we need to re-open it 3-4 times to get it)
what we've tried is to enlarge timeout for HTTP protocol (tx SMICM, from former 30 to actual 60) but only effect we got is that we're waiting for the error longer time
It will be really great if anybody of you guys can give me an advice where the problem can be or where should I look and what to check
Thanks,
David

Hi Christoph,
thanks for tip, unfortunately this was already flagged, currently settings are:
for Display Settings:
yes - include ECL control
use HTML control
empty - maximum viewer wait time
(do you think that setting some value for this could help)
yes - deactivate generic object services in viewer
no - doc display as dialog box
yes - deactivate data provider cache
Storage Settings:
yes - always copy document class from document type
yes - permit multiple assignment
Thanks,
David

ORA-04062 error when running forms with different users

ORA-04062 error when running forms with different users
I have a form that has a block that should display some data from another users tables. (The other user's name is dynamic, it's selected from a list box)
I wrote a stored procedure to get the data from other user's tables.
When I compile the form and run it with the same user I compiled, it works without any error. But when I run the compiled form with another user I get the ORA-04062 (signature of procedure has been changed) error.
I tried setting REMOTE_DEPENDENCIES_MODE to SIGNATURE in init.ora but it didn't help.
My Forms version is 6i with Patch 15.
Database version is 9.
Here is my stored procedure:
TYPE Scenario_Tab IS TABLE OF NUMBER(34) INDEX BY BINARY INTEGER;
TYPE Open_Curs IS REF CURSOR;
PROCEDURE Get_Scenarios(User_Name IN VARCHAR2, Scen_Table OUT Scenario_Tab) IS
Curs Open_Curs;
i NUMBER;
BEGIN
OPEN Curs FOR
'SELECT Seq_No FROM '|| User_Name ||'.scenario';
i := 1;
LOOP
FETCH Curs INTO Scen_Table(i);
EXIT WHEN Curs%NOTFOUND;
i := i + 1;
END LOOP;
END Get_Senarios;
I would be happy to solve this problem. It's really important.
Maybe somebody can tell me another way to do what I want to do. (getting a list of values from another users tables)

I think it should be a better solution to create a package,
and put your own TYPES and procedure into it.
CREATE OR REPLACE PACKAGE PKG_XXX IS
TYPE TYP_TAB_CHAR IS TABLE OF .... ;
PROCEDURE P_XX ( Var1 IN VARCHAR2, var2 IN OUT TYP_TAB_CHAR );
END ;
Then in your Form :
Declare
var PKG_XXX.TYP_TAB_CHAR ;
Begin
PKG_XXX.P_XX( 'user_name', var ) ;
End ;

Error 500 Internal Server Error" When Generating Hyperion Financial Reports in PDF Format

We are unable to open pdf reports in Workspace with the following error. It was all working fine and doesn't work now for unknown reasons.
Error 500 Internal Server Error" When Generating Hyperion Financial Reports in PDF Format
We are on 11.1.2.1 environment. Ghost Script 8.54 and Java heap settings xms256m and xmx512m.
Please advice.

hello,
just to clarify
a) the parameter is named DESFORMAT not :DESFORMAT, there is
no : in front of the name, if you submit it via URL !
b) there are some issues with acrobat5 and IE but those are not
only caused by PDFs generated with oracle reports.
regards,
the oracle reports team --pw

Error when generating catalog SRM_EXTRACTED_CTLG

Dear All,
We are trying to transfer product and contract catalogs from SRM server to Catalog authoring tool. The RFC connections were created and scenarios in XI have been imported as per the cookbook. The XI part seems to be working fine and a correct response was received by XI (as per SXMB_MONI), but we find the following error in the SRM application log (tcode: SLG1)
The following exception was raised:
/CCM/CX_OBJECT_CREATION_FAILED
Error when generating catalog SRM_EXTRACTED_CTLG
The exception occurred at the following point:
Program /CCM/CL_CATALOG_MANAGER=======CP
$EXC_CLASS /CCM/CX_OBJECT_NOT_FOUND
The earlier threads seemed to mention applying service packs so we did a check and found everything fairly up to date, as follows:
SRM Server 5.5 (Service Pack 4)
ABAP Rel 7 (Service Pack 7)
CCM Server 2 (Service Pack 4)
As I'm basically an XI person, I'm not sure how to debug this error. Can anyone please help me out on his?
Thanks and Regards
Arun

Hi All,
Just bumping up my question again. Any pointer on this... please?
Best regards,
Arun

Error when Generating the Program

Recently there was an SP upgrade and my Planning Book started giving me this error message (SCM version =5.0 and SP = 7)
"Error when generating the program" Message no. /SAPAPO/TSM141
Diagnosis: Generated programs are programs that are generated based on individual data objects, such as planning object structure, planning areas and Infocubes. These programs are then executed in the transaction. An error occured during the generation of such a program
Possible causes:
1. The template has been corrupted
2. The object that the template uses to generate the program contains inconsistencies; for instance an Infocube has not been activated
This error occurs when I try to open the my planning book/creating the selection profile. I've re-activated the Infocube and later deactivate and active my POS and tried to do the same for the Planning Area....but the error still persists. I tried to create a new planning area and tried it again but the error still persists. I've tried to fix any inconsistencies in the planning area time series objects by running the consistency check....however the same error pops up during the consistency check....
Anyone encountered this error message and any possible solutions to this issue.
Thanks
Surender

I did find an ABAP Dump when looking at ST22. The short message is as follows:
Runtime Errors         GEN_BRANCHOFFSET_LIMIT_REACHED
Date and Time          05/14/2007 19:33:54
Short text
     Jump distance is too large and cannot be generated.
What happened?
     A jump distance is too large and cannot be generated.
     A control structure or a routine with "CHECK" or "EXIT" contains
     too many ABAP statements.
     Error in the ABAP Application Program
     The current ABAP program "GP_MET_PSTRU_BASIC_FORMS" had to be terminate
      because it has
     come across a statement that unfortunately cannot be executed.
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator.
     Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
     keep them for a long time.
Error analysis
     During the generation of program "GP_MET_PSTRU_BASIC_FORMS", the system
      determined that
     within an ABAP event a control structure (for example, IF..ENDIF
     or LOOP..ENDLOOP) or a routine (for example, FORM routine) has
     become too large. The resulting jump distance is too large so that
    it could no longer be generated.
    With the internal load format, the jump distance must not be
    greater than 32768 (this is the size of approximately 10.000
    ABAP statements).
    The jump distance that is to be generated, however, is 50885.
How to correct the error
   The ABAP application program must be changed.

Error when extracting data with extractor 2lis_04_matnr - NEED HELP ASAP !!

Hi experts!
Got an error when extracting data with extractor 2lis_04_matnr.
System says (short dump):
DUMP TEXT START----
Runtime error:    CONNE_IMPORT_WRONG_COMP_TYPE
Exception:   CX_SY_IMPORT_MISMATCH_ERROR
Error when attempting to import object "MC04P_0MAT_TAB".
The current ABAP program "SAPLMCEX" had to be terminated because one of the statements could not be executed. This is probably due to an error in the ABAP program. When attempting to import data, it was discovered that the data type of the stored data was not the same as that specified in the program.
An exception occurred. This exception is dealt with in more detail below. The exception, which is assigned to the class 'CX_SY_IMPORT_MISMATCH_ERROR', was neither caught nor passed along using a RAISING clause, in the procedure "MCEX_BW_LO_API" "(FUNCTION)".
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is: When importing the object "MC04P_0MAT_TAB", the component no. 5 in the dataset has a different type from the corresponding component of the target object in the program "SAPLMCEX". <b>The data type is "D" in the dataset, but "C" in the program.</b>
DUMP TEXT END----
Please, can someone explain me how to solve it?
Really need help ASAP!
Thanks in advance,
Jaume
Message was edited by:
        Jaume Saumell
Message was edited by:
        Jaume Saumell

Hi,
Check this note: 328181
So you need to delete entries in SM13/LBWQ for application and also detup table content.
And then refill teh set up table.
If you are in production clear the entries by running collective run no of times for this application 04.
With rgds,
Anil Kumar Sharma .P

Error when generating the update program RSAU484

Hi,
I am getting the following error while loading data into customer master from CRM system
Error when generating the update program
Message no. RSAU484
Diagnosis
An error occurred during program generation for InfoSource MR_CDB_CUST_HFR and InfoProvider 0BPARTNER$T. This may be extrapolated to incorrect update rules.
Procedure
Check and correct your update rules and then generate the update program again. You can find help on the error in the error log.

Yes,there is just a single line of code in the start routine
DELETE DATA_PACKAGE WHERE CUSTOMER is initial.
and update rules for Business partner and customer market which are object mapped 1:1. No routines or formulaes.
Could this be a technical issue on the flexible update or a data quality ?

'Error when generating the selection screen "0500"

Dear all,
I have copied a function group QEES to ZQEES through SE80. In that I have copied all screens, includes, function modules etc..
Now when I activate the ZQEES, I get an error 'Error when generating the selection screen "0500" of report "SAPLZQEES'.
There is no problem with screen 0500, I have activated it.
But when I activate ZQQES, I get the error.
Please let me know the reason for this.
It will be highly appr
Thanks in advance,
Sachin

Hi Sachin,
there could be a problem while copying in renaming, delete the Function group ZQEES and recopy the Standrad function group and only rename the the FM QEES_SHOW_SELECTION_SCREEN to ZQEES_SHOW_SELECTION_SCREEN and copy and activate it will work.
regards,
Srini

Error when generating the update program

Hi BW Experts,
I am facing issue while loading data to cubes:
0TCT_C01 & 0TCT_C02
In load monitor (RSMO) -> details> some data pakages are going thru successfully while some are failing with error:
Error when generating the update program
Thanks

Hello,
Try activating both the cubes using RSDG_CUBE_ACTIVATE. Activate them even thou they seem active.
Also you can refer to OSS Notes:
Note 1146851 - BI 7.0 (SP 18): Error RSAU 484 when generating update
Note 1152453 - Termination generating InfoCube write program
Regards,
Shashank

Error when generating master data routines

Hello all,
I´m trying to activate 0BPARTNER but an error appears: Error when generating master data routines, and no more information is provided.
I´m working with BW 7.0.
Has anybody had this problem?
How could I solve it?
Thanks in advance.
Carmen

Hi Carmen,
I'm working with SAP BW 700 and I had also this error during a characteristic activation in my QA system. This happened when I tried to transport the activated characteristic from my DEV system.
I found also message TK425 when I was trying activation through RSDG_IOBJ_ACTIVATE program.
I solved this error message with OSS note 01458319 700SP24: "Transport fails during the impact analysis of DTP".-
I hope this helps.
Best Regards.
AW

Error when generating transport dataset (transfering queries with RSAQR3TR)

Hi!
I try to transfer queries from one system to other.
Systems are not connected with each other, so no transports are available.
I am doing like this:
- running program RSAQR3TR in "old" system
- downloading a query as TXT file into my PC
- running program RSAQR3TR in "new" system
- uploading TXT file into "new" system and get a message - "Error when generating transport dataset"
I have only query and user group in "old" system. Is this information enough to transfer them to "new" system?
<b><REMOVED BY MODERATOR></b>
Mindaugas
Message was edited by:
Alvaro Tejada Galindo

Hi,
Step 1. Run RSAQR3TR in 'old' system. Select EXPORT and specify the objects to be transported.
(System includes these in an automatically created transport request)
Step 2. Release this transport and request it be transported to 'new' system.
(This results in the entries being populated in transport table AQTDB in 'new' system).
Step 3. Run RSAQR3TR in 'new' system. Select IMPORT and tick the Overwrite checkbox. Specify the transport number in the field labelled 'dataset with imports'.
(RSAQR3TR gives the message that stuff has been imported OK).
Step 4. if you still couldn't find the queries, so ran RSAQR3TR one more time, this time specifying 'Copy Standard Area -> Global Area'
Regards
Sudheer

[JHS 10.1.3.0.59] Error when generating Group with Display fields

Similar Messages

Maybe you are looking for