Jinitiator, Appletviewer - and MS IIS 4.0
I have a few questions regarding Dev2000 2.1:
1) I was able to web enable a form through Netscape Enterprise
Server 3.5.1, using either Jinitiator 1.1.5.3 or the
Appletviewer; however, the font size and colors of some fields
on the form were altered substantially by Jinitiator, including
shifting of fields and boilertext to the left in an arbitrary
way. Has anyone experienced this and been able to prevent this?
Also with Jinitiator, once exit the form to another web site,
there seems to be no way to get back to the form unless one has
to completely get out of the browser and click on the browser to
get back in and reload the form.
2) I got the Dr.Watson error often using Appletviewer. It seems
to be quite unstable. I was able to enter a few records (in a
table of about 50 fields) at a time, and the Appletviewer froze
and then came the Dr. Watson system error. Is this expected?
3) I was only able to bring up the form with Netscape server
(enterprise 3.5.10). But I did not succeed at all with Microsoft
Internet Information Server 4.0. With both the Jinitiator, and
the Appletviewer, I got the error message
"http//hostname/web_code/oracle/forms/uiClient/v1_4/util/Registry
.dat is missing" But I checked, and the file Registry.data is
there and I did not experience this problem with Netscape server.
Any help/suggestion is appreciated.
-Long-
null
Ok, here is a much more detailed explanation of the trouble we
have been having. A lot of it looks similiar to problems other
people have been having on the forums here.
I printed out a copy of the Exchange Portlet Help File prior to
beginning the install. On page 8 of 12 where it lists depencies
it states that it needs the following:
Microsoft Exchange Server 5.5 (currently running it)
Microsoft Internet Information Server 3.0 (currently running 4.0)
Microsoft Outlook Web Access (Currently up and running)
Starting on page 10 of the 12 printed pages lists the
instructions for pre-installation on the <exchange_host>. These
are followed and step 8 has a valid result.
At this point I made the changes to Jserv.properties and
zone.properties listed in the directions and copied the
properties.xml file to the appropriate directory. Following
these changes I restarted the apache server.
The next step is "Registering the Provider with Oracle9iAS
Portal". This is where the trouble starts. The documentation
says to logon to the Exchange Inbox external application
hyperlink. A new page opens up for the Exchange Inbox asking
for the username and password of the desired mailbox. It does
not provide a field for the Exchange Mailbox Alias that is tells
you to enter in the documentation. Clicking the login button at
this point send the page to the following address.
http://adm5:7777/pls/admdev_sso/ADMDEV_SSO.wwsso_app_admin.login_
fappuser
This results in a blank page that does nothing but show the page
loading text at the bottom of the browser. After a length of
time the page redirects to the following address.
htt[://adm5:7777/servlets/exchangeApp?ExchangeAction=performlogin
The page displays a page not found error.
If anyone has any ideas or further questions or suggestions I
would greatly appreciate it.
Similar Messages
-
Oracle Forms and Report Server and MS IIS Coexists in one Server
Dear All,
I have a Windows 2003 Server with two IPs and have IIS bind (10.1.1.20) to one IP and Oracle (10.1.1.21) bind to the other. But only one service can only run at any one time. Can someone help on how to make the two coexist on port 80 on different IP on one machine. Thanks.
Regards,
Kueh.Default settings for forms session timeout is 15 Minutes. But heartbeat parameter (default 2 minutes) doesn't allow AS to close idle sessions. So define heartbeat=20 in your formsweb.cfg file.
As far as reports are concerned set engineResponseTimeout="15" in your report server configuration file. This setting will not allow any report to remain in the queue for more than 15 minutes.
Regards
Mohsin Iqbal -
Can COREId be used to secure applications running on MS IIS? If so, can the WebGate or WebPass be installed on the IIS server (we only have the one IIS server and don't think we'll be funded to purchase a second server)?
We have been having trouble with CoreId and Microsoft IIS. Specificallly with CoreIDs webgate isapi filter and Microsoft's Windows Sharepoint Services. Although there is CoreId documentation on integrating Sharpoint Portal with CoreId to enable SSO, that's not our goal.
We are attempting to use COREId to protect a Mediawiki (mysql/php) website that is located in a subfolder of the IIS default website (c:interpub\wwwroot\mediawiki). We also have an instance of Windows Sharepoint Services(WSS) running on the same server. WSS uses a stsflr.dll isapi filter. We are not using COREid for sharepoint.
Our problem is that the webgate.dll isapi filter conflicts with Sharepoint. Anonymous sharepoint pages are served properly but sharepoint users cannot sign-in successfully using sharpoint login scheme (not coreid). -
How do I set up and use IIS 7.5 in Windows 7
I just bought a new machine and installed Windows 7 RC Ultimate and CS4 on it.
I set up IIS (or at least I think I did) and Inetpub now shows in the directory listing, so it should be there.
Only problem is that I cannot save any files to any site in the Inetpub directory even when logged in as administrator.
I have to manage lots of web sites that use asp, and so need to have the Inetpub facility.
Setting up IIS in Windows 7 is poorly documented, and seems quite complex.
The instructions on Microsoft's technet site for accessing IIS do not work, and so I am at a loss.
Am I to assume that the normal Dreamweaver method of storing files in inetpub/wwwroot/sitefolder is no longer valid?
Whether or not, can anyone tell me how to set up a site in windows 7 that will run an asp site using IIS?http://forums.iis.net/t/1147354.aspx has the answer to providing acess to folders that are not usually accesible in Windows 7.
Run the following command from an elevated command prompt (right click the "command prompt" icon and select "Run as Administrator").
icacls %systemdrive%\inetpub /grant %userdomain%\%username%:(OI)(CI)(F) /grant %userdomain%\%username%:F
This command will add full access for your user account to the INETPUB directory.
Now the Administrator privileges which you don't have don't matter anymore because your account and not Administrators grant you access.
How obscure can you get?
I assume that changing the folder name from inetpub to whatever other folder you need to access will have the same effect.
All I have to sort out now is how to get the F12 key on my wireless keyboard to run a file when pressed in Dreamweaver - but that is another problem. -
Hi,
I have a Windows 2008R2 Updated / Exchange 2010 SP3 Rollup 7 (Role CAS,HUB,MBX) with only external users connection : ActiveSync, EWS, OWA, Outlook Anywhere.
4 processors and 24Go of memory are allocated to the Exchange server VM (VMWare).
Netscaller is used as reverse proxy in DMZ.
There is around 500 users connecting with Outlook Anywhere to Exchange. Users are using Outlook 2010 or 2013 with last updates and cache mode enabled (owner mailbox and delegations). Users are location all around the world (around 50 sites). So no users
is domain integrated.
Users are complaining about disconnection, and Outlook freeze (Outlook is not responding). This happened at any point of time during the day, and for different kind of actions (Outlook is just open, Try to press Send button, try to press Transfer button).
The freeze happened randomly for users. I have seen the problem, and Outlook sometimes freeze during few seconds, sometimes during 5 minutes without any reason. (no file copy, no action asked...)
I noticed that freeze are matching with the Outlook event id 26 on the workstation (Connection to the Microsoft Exchange Server has been lost. Outlook will restore the connection when possible). Also, at the same time, I can see around 200 lines in
the IIS HTTPERR Log (Exchange Server : C:\Windows\System32\LogFiles\HTTPERR) the following lines:
2014-11-20 10:39:43 NETSCALLERIP PORT EXCHANGEIP 443 HTTP/1.1 RPC_OUT_DATA /rpc/rpcproxy.dll?EXCHANGEFQDN:6004 - 1 Connection_Dropped_List_Full MSExchangeOutlookAnyWhere
2014-11-20 10:39:43 NETSCALLERIP PORT EXCHANGEIP 443 HTTP/1.1 RPC_OUT_DATA /rpc/rpcproxy.dll?EXCHANGEFQDN:6001 - 1 Connection_Dropped_List_Full MSExchangeOutlookAnyWhere
What has been already checked :
Check IOPS: seems to be normal
Check Processor consumption: seems to be normal
Netscaller TimeOut = 8h
Bandwidth where the server is hosted : more than enough
Bandwidth of client internet connection : Traffic do not increase when the problem happen
Firewall TimeOut : seems to be ok
Firewall Protocol Filter : seem to be ok
Workstation MTU : Ok : ping -l -f 1472 = Ok, so best MTU = 1500 (1472+28)
Outlook Profile : Clean Up OST, sync of all folders, download address book.
wireshark on workstation : nothing seems to be wrong but difficult to analyse, so I maybe missed something.
Configuration change on Exchange :
HKLM\Software\Policies\Microsoft\Windows NT\RPC\MinimumConnectionTimeout = 120
Disable throttling Policy
Adsiedit, change Max Memory alloc for ESE : msExchESEParamCacheSizeMax = 327680 (around 10GB) msExchESEParamCacheSizeMin = 131072 (around 4GB
Adsiedit, change Min Memory alloc for ESE : msExchESEParamCacheSizeMin = 131072 (around 4GB)
Host file : add hostname and FQDN of Exchange Server
Disable IPV6 : HKLM\System\CurrentControlSet\services\TCPIP6\Parameters\DisabledComponents = HEX 0xffffffff
IIS : system.applicationHost : webLimits : minBytesPerSecond = 0
Create dedicated IIS AppPool MSExchangeOutlookAnyWhere for /RPC and /RPCWithCert
AppPool MSExchangeOutlookAnyWhere : Regular Time Interval (minutes) : 0
AppPool MSExchangeOutlookAnyWhere : Queue Length : 20000 (Should be the solution but not working)
netsh int tcp set global chimney=disabled
netsh int tcp set global rss=disabled
HKLM\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\MaxUserPort = 65534
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\KeepAliveTime : 300000
HKLM\SYSTEM\CurrentControlSet\Services\Netlogon\Parameters\MaxConcurrentAPI = 150
IIS machine.config : <system.web> : requestQueueLimit="65535"
Microsoft.Exchange.RpcClientAccess.Service.exe.config <add key=”LoggingTag” value=”ConnectDisconnect, Logon, Failures, ApplicationData, Warnings, Throttling”/>
Uninstall All agents (except Backup Agent)
Uninstall Antivirus
Will be done tonight :
Exchange and DCs : HKLM\SYSTEM\CurrentControlSet\Services\Netlogon\Parameters\MaxConcurrentAPI = 100
Exchange IIS : Increase AppPool MSExchangeOutlookAnyWhere Queue Length to 40000
Exchange : decrease HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\KeepAliveTime to 60000
You're welcome if you have any idea.
Thanks.
Jo.Hi,
Thanks for your answer. Here are my comments :
1. Disable IPv6 then restart your Exchange server
Already done since the install of Exchange.
2. Confirm if there is any NLB device in your environment, please remove NLB firm client server
There is only one Exchange server in the Org. So no NLB installed on the server (NLB is used on the Netscaller used as a reverse proxy). In Addition, the article apply for Windows 2008, or the server is installed with Windows 2008 R2.
3. If there is a proxy server configured in IE, please uncheck it
I guess you are talking on the client side. There is no proxy on the client side, Outlook Anywhere connect directly to the internet.
4. Collect more error logs in Event Viewer in Exchange and collect the IIS logs in
folder “c:\inetpub\logs\logfiles\W3SVC1”
the error I reported in the description is from IIS, and always appear when end users report a problem. In W3SVC1 file, there is also errors, but those one appear even if Outlook clients are working fine. So I cannot isolate any specific
error. The most common from W3SVC1 log are :
2014-11-25 08:02:17 EXCHANGEIP POST /autodiscover/autodiscover.xml - 443 - NETSCALLERIP Microsoft+Office/15.0+(Windows+NT+6.1;+Microsoft+Outlook+15.0.4667;+Pro)
401 1 2148074254 0
2014-11-25 08:02:17 EXCHANGEIP POST /EWS/Exchange.asmx - 443 - NETSCALLERIP Mac_OS_X/10.9.5+(13F34)+CalendarAgent/176.2
401 1 2148074254 0
2014-11-25 08:02:18 EXCHANGEIP POST /EWS/Exchange.asmx - 443 - NETSCALLERIP Microsoft+Office/14.0+(Windows+NT+6.1;+Microsoft+Outlook+14.0.7128;+Pro)
401 1 2148074254 0
Regards,
Jo. -
How to use Javascript NQSWENav calls between Apache/OBIEE and MS-IIS/Siebel
Hoping someone can help me. We're upgrading systems, moving from Analytics 7.7 to OBIEE 10.1.3. Analytics Web used to sit on same IIS web server as Siebel CRM. In Analytics 7.7 I used:
[html]"<a href=\"javascript:NQSWENav('All Activity List View','Activity List Applet With Navigation','"@"'); \">"@" </a> "
to allow report links to open the CRM Activity window (where "@" was populated with the value of ROW_ID). This worked in an environment where both CRM & Analytics resided on the same Windows machine and shared the same IIS web server.
We have now upgraded Analytics 7.7 to OBIEE 10.1.3, and have moved OBIEE to a much more robust AIX machine which runs an Apache web server. My users do not want to loose the functional ease of running a report in embedded Analytics, clicking a link, and navigating to the relevant CRM form.
This functionality is no longer working in the new split environment. I'm not surprised by this, but would like to get it working again if possible. Does anyone know how to get this to work across hosts and web servers?Hi Redneck,
the OBI web server and Siebel web server must share the same virtual IP. Excerpt from the original doc:
[snip]Also, the host name for the Web server (or Virtual IP) serving content from the Siebel application server must match that for the Siebel Analytics Web Server, because the JavaScript Security model prevents a script on one server from affecting another.[snip]
http://download.oracle.com/docs/cd/E12104_01/books/AnyInstAdm/AnyInstAdmnAppIntegrate12.html#wp1011778
http://download.oracle.com/docs/cd/E12103_01/books/AnyWebAdm/AnyWebAdm_Dashboard4.html
We had this already a couple of times and putting the two web servers under the same virtual IP will do the trick for you.
Cheers,
C. -
Relative Links and Microsoft IIS not working, why?
I've searched high and low for the solution to this problem
and no one seems to give a definite answer.
I have a typical home server set up using Microsoft IIS on
Windows 2000 as a test server for websites.
The typical folder structure of the IIS is Inetpub >
wwwroot > content
Since I am working on multiple websites at a single time I
place my websites as such Inetpub > wwwroot > websiteFolder1
with multiple websites under wwwroot
Now I setup the dreamweaver sites with the root directory as
websiteFolder1 but when I go to use relative links, dreamweaver is
looking at the wwwroot level instead and the relative links won't
work. So incase that seems hard to understand when I have a css
file that is in Inetpub > wwwroot > websiteFolder1 >
library and I want to relatively link to it, dreamweaver is instead
of seeing websiteFolder1 as the main, it is starting with wwwroot
and that makes the file not found.
How do I get the relative links to see the folder under
wwwroot as the root directory instead of wwwroot?
Thanks Much!You would have to set up virtual sites in your IIS
installation. Google
that term, and I'm sure you will find lots....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Visionology" <[email protected]> wrote in
message
news:ee18ce$jej$[email protected]..
> I've searched high and low for the solution to this
problem and no one
> seems to
> give a definite answer.
>
> I have a typical home server set up using Microsoft IIS
on Windows 2000 as
> a
> test server for websites.
>
> The typical folder structure of the IIS is Inetpub >
wwwroot > content
> Since I am working on multiple websites at a single time
I place my
> websites
> as such Inetpub > wwwroot > websiteFolder1 with
multiple websites under
> wwwroot
>
> Now I setup the dreamweaver sites with the root
directory as
> websiteFolder1
> but when I go to use relative links, dreamweaver is
looking at the wwwroot
> level instead and the relative links won't work. So
incase that seems
> hard to
> understand when I have a css file that is in Inetpub
> wwwroot >
> websiteFolder1 > library and I want to relatively
link to it, dreamweaver
> is
> instead of seeing websiteFolder1 as the main, it is
starting with wwwroot
> and
> that makes the file not found.
>
> How do I get the relative links to see the folder under
wwwroot as the
> root
> directory instead of wwwroot?
>
> Thanks Much!
> -
I can access the remote shares contents in my browser if I use file:////<server name>/share/filename.file but when I set up a link in the html code, I receive the 403.14 error in the log files. I also have directory listing set on the IIS 6 webpage
on our intranet server.
I am stuck and at a loss... I'm not terribly familiar with IIS...
Thanks in advance,
EricHi,
Base on my experience, the UNC must use the
\\+PATH format, in some case if your code is not standard it will cause unknow error, more about the IIS question please post to the IIS forum.
More information:
IIS support forum
http://forums.iis.net/
Naming Files, Paths, and Namespaces
http://msdn.microsoft.com/en-us/library/windows/desktop/aa365247(v=vs.85).aspx
Thanks for your understanding and support
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Flash FLV and Microsoft IIS Bug?
I have run into a problem that may be a real problem for
anyone relying on SWF files playing FLV files from Microsoft IIS
servers. I have used this method of playing videos on a few of my
clients sites and as of the last week or so these videos stopped
playing! I know nothing changed with the videos so I was not sure
what happend. As a spent countless hours trouble shooting this
problem, I found that if I took the .SWF and FLV files off the
server they were on and moved them to another server (non
microsoft) they magically work again. At first I thought my hosting
company had a problem with their IIS server but I checked three
other servers (IIS) and they all have the same problem (all
patched). Now I know these files played on all these servers in the
last week or so. I even went as far as to check these file against
a computer running XP with IIS turned on and running and the SWF
file loads but will not play the FLV video. I even downloaded
"flvplayer" to check this theory to make sure I didnt do something
stupid with my SWF file. It appears that all my computers that have
been patched using microsoft's update program over the last week or
so are now broken. Is there anyone out there that can check my
theory?Maybe the settings got deleted during the patch. Follow these
directions and see if they work again:
http://www.adobe.com/cfusion/knowledgebase/index.cfm?event=view&id=KC.tn_19439&extid=tn_19 439&dialogID=185014411&iterationID=1&sessionID=9630f39ccb3510656d78&stateID=0+0+37458677&m ode=simple
Good luck. -
System.IO.File.Exists And set IIS
Hi all.
I want Check file exists in SharePoint webpart.
So I found class the System.IO.File.Exists.
---source---
string path = @"\\nar-cla500s3\memo\test\skill\print-001.xls"; <-- return only false
try
if (System.IO.File.Exists(path))
Label.Text = "true";
else
Label.Text = "false";
catch { }
----source-----
If i wirte LocalPath(@"C:\memo\test\skill\print-001.xls), I Can get True.
My all APP's processID is win\lx13040020, And win\lx13040020 can access <\\nar-cla500s3\memo\test\skill\print-001.xls>
But I got only false...
is this double hope problem? I want check exists from file server.
I need your help, Thank you.Hi,
I will not recommend to change the settings from IIS. This fixes your problem but might create more. Setting the value to 'disable' means impersonation not in action and all resources will be accessed using app pool account instead of currently logged in
user. If you would run your code inside SPSecurity.RunWithElevatedPrivil... then you could bypass the impersonation without changing IIS settings. Now disabling the impersonation you add the risk of security breach as all users can access what app pool can
access. For SharePoint site, I don't think you should change settings from IIS.
Some useful links:
http://stackoverflow.com/questions/1061857/sharepoint-and-identity-impersonate-false
http://extreme-sharepoint.com/2012/05/30/impersonation-elevation-of-privileges/
Thanks,
Sohel Rana
http://ranaictiu-technicalblog.blogspot.com -
Forms services, JINitiator, Webutil and scripting
Hi all,
We build a forms / reports based application that runs on Oracle Application Server 10g. The application uses Webutil.
The first time the application is started from a desktop there is a download / install procedure that comprises the following three products / file types :
1. JINitiator is downloaded / installed (1.3.1.18 in this case)
2. JAR files are downloaded and stored in the JAR cache
3. The DLL's JACOB, D2kWUT60 and JNIsharedstubs are downloaded and stored in one of the JInitiator install directories.
Once that is done, the application runs fine, time and time again without any additional downloads/installes.
One of our clients would like to package/script (MSI) the before mentioned steps so there will be no user interaction and/or security issues. My knowledge of this process is limited. Are there any experienced people about that can shine a light on this subject please ?
Any help is greatly appreciated,
Regards
Gerrit BreebaartI've successfully created an MSI for Jinitator in my current project and I've seen it done on other projects. There is no step by step procedure as each project has it's own requirements / standards.
It should be pretty simple if you have a basic knowledge of Windows Installer technology. The only tricky bit will be triggering the install-on-demand functionality and getting the application to self repair for each user that logs on as Jinitiator has no advertised shortcuts.
If you can specify the exact problem that you are getting I'd be happy to advise. -
Flash Help and Publishing / IIS
My supervisor is responsible for publishing my projects to
our intranet server. He published a project of mine and found that
he ran into issues with IIS. I don't have all the details so this
may not be enough to get a good answer, but he told me that he had
to use an * (wildcard) in IIS to allow all the Flash Help
functionality to show on a web page. He wants to know what can be
done so the * does not have to be used, if anything, to have all
the functionality present. Thanks for any help if this is enough to
give a direction, and if not I will try and get more details from
him for later.Hi jacobremprex
Are you using Flashhelp Pro output and the RH Server
software? If not, I don't think you need IIS to publish to the
intranet. You just need to publish to the intranet URL.
Can you tell us where the wildcard has been placed and also
what pieces of Flashhelp functionality aren't working. -
Jinitiator startup and close down colours
My aim is to run our system in the context of a customer intranet web site. The site will have a header/banner and a side panel. A click on a link will start the forms system.
When Jinitiator starts up (assuming the component is already installed), it changes colour to light grey, with the text 'loading Java applet', then changes to dark grey, displays the menu (in dark grey) and starts the form.
When the application closes down the applet shows a dark grey colour.
What I would like is to be able have a little less colour transitions and more control over the colour. Many page backgrounds are in fact white, and I would settle for the colour staying white.
Does anyone think the same or know of a solution? I would like forms to appear as seamless as possible in a web site.Thank you for your reply Robin.
I think the first flash to light grey would appear to be the Java applet. The second switch to dark grey I think may be under the control of a forms components. I have observed with the Oracle look and feel that the colour is dark grey and with Generic it is white-ish (both colours being the same as the eventual menu colour).
The effect is fine with the separate frame option where we want the application to look more like client/server, but I am, in this instance, looking for a way to have a form display flat and seemlessly in a web page without windows or borders. The colour changing although cosmetic makes the form area in intranet site web page seem less seemless.
Incidently I have observed the rather neat trick used in the demos of hiding the title bar behind the top of the applet area. Do you know of a way to remove the window border so the edge of a form window can blend with the web page without there being a hard line?
Is there a way of controlling this dark grey colour or are there plans to? -
Applet behaves differently in appletviewer and Web Browser, how to resolve?
I have an applet application which need to access disk files. While I set the .java.policy file properly and the applet runs excellent in appletviewer. However, if I load the applet in Web broswer (e.g. NetScape), the applet cannot access the same disk files as it does in appletviewer?
Does anyone have a clue on how to resolve?
Thank you.I know you can do it with JavaScript, and I know how to do that...but this is a Java forum (I want a Java solution, that's why I post it here)!
Therefore my question relates to Java, and in this case, it's an applet.
Any solution to my problem, please? -
BOE R3 and VS2008 IIS Web Site Open Error Front Page Extensions Missing
Hi,
Can some please advise.
We have BOE R3 deployed with TomCat.
We have IIS for applications Development with VS 2008.
I have added a the HowToScheduleCustom_VB to the IIS.
When I Open the Web Site is VS 2008 I get an error Front Page Extensions Required.
Are the Front Page Estensions required.?
Or should we be using the Java Eclipse.?Are you trying to open the website on your development box (the one that has VS 2008 installed on it) or another server? If it's on another server, you might want to check out this thread:
http://forums.asp.net/t/1284716.aspx
and the mskb article that it links to.
-Eric
Maybe you are looking for
-
Link between PO and Inbound Delivery - Delivery confirmation
Hi Gurus, I have a question regarding the link of Purchase Order and Inbound delivery completed indicator. This is my scenario. I had created a purhase order with qty 10, then i created a Inbound delivery with 8 qty then i did GR with reference to in
-
In writing my first object and driver programs for object oriented programming I have several questions since my textbook and the java compiler seem to have different ideas of what constitutes correct code... The errors I'm getting that I can't resol
-
How to make SAPScript to display special character?
Hi all, How to make SAPScript to display special character like character in 'Wingdings 2' font type? Now, I cant make SAPScript to display those special characters in the font type. Best Regards, Chee Boon
-
Customizing the guest account in Snow Leopard
Has anyone figured out how to permanently customize the Guest account in Snow Leopard. I did this with Leopard by following the instructions at Michael's Mac. However, those instructions don't work under Snow Leopard.
-
Help with puzzling wifi range problem on Macbook Pro
Hi There, I am experiencing wifi range problems with my MacBook Pro (10.9.4). Our wireless modem (Arris DG860) is located in the office, in the center of our home. The wifi bars register full on my Macbook and the internet works well in office. When