Jinitiator Installation on Pentium 4

Hi friends
I have problem with installation of
Oracle jinitiator on a Pentium 4 , what should I do ?
Thanx in advance

The note refered to above has the following content - however you need to ensure you Forms version is still compatible.
Problem
~~~~~~~
Jinitiator 1.1.8.3 will not work with pentium 4 machines
Versions Affected
~~~~~~~~~~~~~~~~~
Forms6i Patch 3 JInitiator 1.1.8.3
Platforms Affected
~~~~~~~~~~~~~~~~~~
Windows/ GENERIC
Description
~~~~~~~~~~~
Jinitiator 1.1.8.3 will not work with pentium 4 machines.
The JIT that ships with JRE/JInit doesn't work on P4. Sun has fixed this,
as of their 1.1.8_006 release of the JRE.
Likelihood of Occurrence
~~~~~~~~~~~~~~~~~~~~~~~~
Anyone using Pentium 4
Possible Symptoms
~~~~~~~~~~~~~~~~~
See Bug References
Workaround
~~~~~~~~~~
See Bug References
Patches
~~~~~~~
Release 1.1.8.10 of Jinitator has the fix to this problem however, it is
recommended that 1.1.8.13 should be used as a minimum.

Similar Messages

How to stop Jinitiator installation for ebusiness suite application

Right now every time I try to log into ebusiness suite, I will be prompted to install Jinitiator for the first time and if I install I will not be prompted from next time onwards, My requirement is to stop prompting even for the firs time.
we are planning to go live with Employee self service and we do not want employees to be dealing with any installations since self service application does not need jinitiator.
which configuration file/profile I have to change?
we are on 11.5.10.2 apps version.IE 7.
Thanks

Thanks for all your time.
Hussein
     you made a good point , I should not stop this but in my case 95% self service users and 5% forms users , so we are going other direction until we figure out a way to stop Jinitiator installation launch based on what responsibilities a user have (self sevice or self service+ forms...).
I tryed to cancel the installation multiple times it comes back again and again.
Srini
     its custom SS resp. I have setup user who just have one self service resp. but still launches Jinitiator installation.
Prasanna
     no thats not how it is working, I have tested this (logged in as a user who just have custom self service responsibilities, still the Jinitiator installation starts up on log in and as I click on any link inside the responsibility).Even if I cancel first time it comes back again and again.
Thanks

Jinitiator installation error: InstallShield has encountered a problem and

Jinitiator installation error: InstallShield has encountered a problem and needs to close. does any one know this? i thought it's installed. but when i run the form, web.show_document doesnt work at all.

i had this problem when i installed jinitiator 1.3.1.17. but when i installed higher version i dont have this problem. however it seems oracle form 9i only launch 1.3.1.17.
need help.

Running test.fmx . Jinitiator installation screen re-appears

On windows 2000, i tried to run the form test.fmx on the web by
calling "run a form on the web menu", I verified before that
ifweb60.exe and ifsrv60.exe has been correctly launched, and
running. But Every time 'Oracle Jinitiator' Installation Screen
is appearing for installing jinitiator. After installing, a
white screen appears with a 'Done' message at the bottom and the
form did not run. What must i do ?

Hello
Tell me that version of IA these using, the version of the
Developer and of the Jinitiator.
Then you tell me if you configured the files 6iserver.
formsweb.
I wait your comments to be possible to help.
Greetings

JInitiator Installation for User in Forms6i/Forms9i

Hi!
I am facing a problem regarding JInitiator. Would be thankful if some body helps me out.
When an application developed in Forms 6i./Forms9i is launched (and hosted through Oracle Application Server 9i Rel 1/Rel2) by a user having administrative rights in Windows 2000/xp/2003 , JInititor installation starts while if an ordinary user acceess the application installation does not start and hence application cant be viewd by an ordinar user.
How to make an ordinary user access application and install JInitiator (without giving him Adminjistrative rights).
Thanks in advance.
Imran

This should generate a logfile , what does it say.
Who install jnit.
Admin or the the person who is currently logged in,
is this on windows domain.
Look for folders C:\programfile\oracle\ and see who has what permission. The user does not have rights to Modify grant him the privs.
Look for c:\windows\system32, user cannot read msvcrt.dll, grant him access. Restart the machine and it should work.
Better will be to create a new user_group IN AD with proper user rights so that you dont have to do this on every machine.

Windows 8.1 installation on pentium 4

Hi, please show me how to install windows 8.1 on p4 pc win Xp isnt good any more :P

plz first check the system requirements for windows 8.1
http://windows.microsoft.com/en-us/windows-8/system-requirements
if ur system meet the above requirements..here are the steps to perform a clean installation of Window
http://windows.microsoft.com/en-us/windows-8/clean-install
www.netblunders.com

JInitiator installation

Hi,
Could anybody tell me where must be JInitiator installed and how this can be done? Must be JInitiator installed on the server too? Is this only for Windows client or for Linux too?
I use Netscape to log to the APPS. And looks like I have to install a plug-in (JInitiator I think) I receive the message "Click here to download plug-in" but if I click nothing happend (I just receive the message "No suitable plugins were found") (this is on the client).
Thanks,
Paul

You do not need to install Jinitiator on the server, just install it on the client (Windows OS).
To access the application from Windows client with IE browser, add the application URL to the list of the trusted sites, have a proper entry in the hosts files and try to access it. The first time you access the application it will prompt you to download/install Jinitiator.
To access the application from Linux client please check the following thread, it should be helpful:
Execute Oracle Applications 11i with Firefox 1.5 on Linux
Execute Oracle Applications 11i with Firefox 1.5 on Linux

Jinitiator 1.1.7.27 problem with Pentium 4 class Intel Processors

If you intend on using this version of jinitiator on a Pentium 4 processor you will need to obtain a compatible version of symcjit.dll from Oracle. This file will need to be copied to the c:\Program Files\Oracle\jinitiator 1.1.7.27 Export directory.

Hi,
Thread 0 Crashed:
0 libobjc.A.dylib 0x90a594c0 objc_msgSend + 16
1 ...eRiotFacebookInputManager 0x02446e54 -OneRiotFacebookLoader loadOneRiotFaceBook + 240
2 ...eRiotFacebookInputManager 0x02446c46 -OneRiotFacebookLoader init + 96
Remove the following files/folder and give Safari another try:
/Library/InputManagers/SIMBL/SIMBL.bundle
/Library/InputManagers/OneRiot Facebook/
(That Library folder is the one present at the top level of your hard drive, not the one under your user account.)

Problem with JInitiator!!! - Urgent

I have Windows 2000 Advanced Server with 4GB RAM and Oracle9iASR2. I'm running Forms&Reports9i services quite well. Now, I have a demand for using OLE integration and for WebUtil purpose I have to install Jinitiator 1.3.1.13, for instance. But when I start a Jinitiator installation, I just see an error message 111 which is telling me that I don't have enough memory, that I must release memory by killing some running application (no matters which one) and then repeat the installation procedure. At that moment I have about 3.8 GB free memory, at least!It's the same problem with some differrent version of Jinitiator. What's the problem? How can I bypass this? Please, help me, this is very urgent!
Dejan

Did you try a reboot of the client?
Also, can you post a full error message , it sounds like this is coming from Windows...
Regards
Grant Ronald
Forms Product Management

JInitiator 1.3.1.22 vs. 1.3.1.18: Are they completly separate installed ?

Actual situation: We have several huge forms-applications running with JINItiator 1.3.1.18. No problem.
Now we have one new forms-application developed, which runs on Forms 10g Rel. 2 with JInitiator 1.3.1.22. Some PC's now need the 1.3.1.22-installation parallel to their 1.3.1.18 installation.
In our test-environment the guys found out, that the JInitiator-Installation will change registry-keys for HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\App Paths\javaw.Exe and some other keys.
They fear, that installing 1.3.1.22 on a PC where 1.3.1.18 is running changes permanently the destination for "javaw.exe". That may be no problem, but the test-guys say: "You have to test the whole big old application on 1.3.1.18, before we install 1.3.1.22"
What should we do? We have to use 1.3.1.22 for our little application and we have no time to check, if the old application with 1.3.1.18 is running as before...
Any ideas ?

You can run as many Jinits on the same machine as your hard drive can hold as long as they are versions 1.3.1.10 or newer. Only the one which is called in the CLSID or mime type (of the html) will be used.
Also, javaw is not called when running applets.
You can prove all of this with SysInternals FileMon:
http://www.sysinternals.com/Utilities/Filemon.html
However, as already mentioned, you will not be able to run multiple versions from within an existing browser session. This will cause the browser to crash.

Webform Doesn't Work after Update JInitiator

I have a Windows NT 4.0 with SP6a box which has the 9iAS 1.0.2.1 installed. The Form Server works well but the JInitator is 1.1.8.7 - too old in version. So that I upgrade the JInitiator to 1.3.1.9. After upgrading, the Form Server doesn't work but resume normal when back to 1.1.8.7.
What I have done are:
(1) Copy the new Jinit1319.exe into 'd:\oracle\806\jinit\' and rename it as jinit.exe.
(2) Modify the related entries for Jinitiator in the configuration file 'd:\oracle\806\forms60\server\formsweb.cfg' to reflect the version change.
When the client machine browses the webform, there is the prompt for JInitiator installation. The installation completes good. But the browser continues to download the page and showing nothing - just the gray background.
Everything works normal when I resume back JInitiator back to 1.1.8.7. Please advise where the problem is and how to fix it, much thanks.
SK

Hi,
check whether you have changed the classid in your html-startpage for the WebForm. I think you have still the old classid inside your html-startpage.
nice weekend :-)

Oracle 8i Universal Installer

I am having a problem installing the Oracle 8i Enterprise Edition DB. After downloading the software, I double click Setup.exe and nothing happens. Nothing is loaded and no error is reported. The same occurs when I click on the autorun application. Any suggestions? Thanks-

Pentium 4? This is a known problem on P4 machines. Search these forums for installation on Pentium 4 machines for the workaround.

Proble with browser or jinitiator

i m using Oracle 10g for Forms and Reports Develpment and i have Windows XP SP2 OS and 2GB RAM
i m designing and developing the oracle forms and when i want to see the output the IE 7 and Mozilla both are not showing the output and not any kind of message i am getting from this.
I have Java and Jinitiator 1.3
so what i should do now n how to see my output of forms
plz suggest me
my mail id is
[email protected]

Is the browser just crashing and disappearing?
If so, it looks like it fails horribly when starting up the java virtual machine (either JInitiator or Sun JVM).
Try to access the test form that ships with Oracle Forms:
http://server.example.com:port/forms/frmservlet
Then also try to access
http://server.example.com:port/forms/frmservlet?config=jpi
to force the use of Sun JVM over JInitiator.
Could be that the JVM and/or JInitiator installation is messed up. You could try reinstalling them and while you're at it, please also test these URLs from another workstation

Oracle 8.1.5 on Windows 2000

I have some problems with the TNS listener. Does anywone know if this version of Oracle runs properly on Windows 2000?
Please help
thanks

There are some known problems (Java/Intel) to do with installation on Pentium 4 systems, see the message "http://technet.oracle.com:89/ubb/Forum1/HTML/001074.html" for details (hope that link's right).
I also had lots of problems installing on a Pentium 3 800, win2k, 512Mb RAM box. The installation would get about half way through then just fall over, sometimes with the bsod. I think (touch wood) I've fixed this by turning off Ultra DMA access to my CDRW drive, which can cause problems when Windows (i.e. not specifically a problem with the installer) is copying large files off CD. Also upgrading my win2k install to SP2 seemed to help.
Cheers,
Ed.
null

Oracle 8.1.5

The strangest thing is that Oracle 8.1.5 installs on pentium 4 but 8.1.6 and 8.1.7 don't .

Hello,
Please try the following link.
http://e-docs.bea.com/wlcs/docs32/relnotes/relnotes.htm#platforms
Or
you can ask at weblogic.developer.interest.commerce newsgroup.
Reiji

Jinitiator Installation on Pentium 4

Similar Messages

Maybe you are looking for