Jinitiator too low 1.1.8.2 when upgrading to jre 1.7.0.45 - alternative solution??

Hi all,
There was a recent post on the above subject for which the solution was found to be as below:
I searched and got the fix for the error - Jinitiator too low 1.1.8.2 when upgrading to jre 1.7.0.45
Fix:
Put the following value in the Runtime parameter of jre 1.7.0.45 in control panel -> java 32 bit icon -> java(tab) -> view
-Djava.vendor="Sun Microsystems Inc."
Thereafter, I was able to access the forms/applications in a new browser.
Question: Isn't there any alternative solution that jre 1.7.0.45 resolves by itself without putting in the above parameter in the java(tab) -> view and allows to open the applications?
Please share if anyone has an alternative fix to the above? Reason being we need to pass on the above information for the setup to all the business users what was found as above.
Thank You for your time
user10088255

Hi,
As far as I know that is the simplest solution you have. If not you have to match the client JRE with the Server JRE.
But a workaround would be, If all the users are in a specific group of a domain you may follow the below link to set the environment variable for the same group:
Windows domain-wide setting of Environment Variables at Logon - No Fluff Just Stuff
HTH!
Thanks &
Best Regards,

Similar Messages

Drum loops are too low in volume vs guitars when overdubbing

After 8 hrs of learning Logic Express 9. I can't record the guitars "hot" because the Apple drum loops are too low in volume. I max them out with extra gain. I even duplicate them so I have two tracks. How can I get the drum loop volume up. I've tried everything I can think of to push it as loud as it will get. I've tried normalizing. I am assuming the quality of the guitar recording is related to how "hot" it's recorded or at least you shouldn't have to turn it down to about 20% when I overdub. I've got an M-Audio solo. Thanks.

Hi
Have you tried monitoring the guitars at a lower lever? You can still record them hot, but listen at a lower level.
From my LE8 manual...
Setting the Monitoring Level
If the Independent Monitoring Level (for Record Enabled Channel Strips) preference in
the Logic Express > Preferences > Audio > Devices > Core Audio tab is enabled, an
independent monitoring level is available when an audio channel is record enabled.
After arming the track, set the fader to the desired level. The original playback level will
be restored when the channel’s Record button is disabled.
Important: The Level fader only controls the playback (or monitoring) level, not the
recording level, when a track is record enabled. Recording levels must be set
externally—on your mixer, or at the original sound source. Care must be taken when
setting input levels, as digital audio will clip when overloaded. Clipping results in a
particularly harsh, metallic distortion, so unless you have a penchant for heavier
musical styles, overloading the inputs isn’t recommended (see “Understanding the Clip
Detector”
Cheers

Jinitiator too low error.

I am running 10.9.3 (new Macbook Air). I have tried everything I can and still receive the Jinitiaitor too low error when launching forms in EBS. I've tried Java 6 and every version of Java 7. PLEASE HELP!!!!

Hi,
As far as I know that is the simplest solution you have. If not you have to match the client JRE with the Server JRE.
But a workaround would be, If all the users are in a specific group of a domain you may follow the below link to set the environment variable for the same group:
Windows domain-wide setting of Environment Variables at Logon - No Fluff Just Stuff
HTH!
Thanks &
Best Regards,

Black Levels too low

I have a problem with the black level. There are too low all the time. When I do color correction and i render the blacks going up to high. Someone can help me?
Thank you,
Mario

I think you are referring to this:
http://prolost.blogspot.com/2008/01/colorista-clips-no-more.html

Blackberry curve 9320 batt too low for radio use

I have had this fone since june and have constantly had probs with the battery life.its now sayin battery is too low for radio use even when there is half a white bar.keeps cutting out during calls.I've constantly got to do a battery pull!any ideas??

Hello guys,
I found the solution! I have 2 9320 and both developed this problem after 5 or 6 months. Battery too low for radio use even if nearly fully charged. I tried everything what described here- battery pulls, soft reload, deleting apps, pulling battery out with charger connected- nothing worked- just dont waste more time. The solution is easy and its not software problem! Just open your phone- if you dont know how check on youtube so you don't damage your phone and simply clean battery connector in a place where it is touching the mainboard. My bb board was black in that place- came off easily and connectors on mainbord looked like new after. I used zippo lighter fluid and clean cloth. Since then no problem on both my blackberries- never switched radio off again with battery not beeing red. I think there was not enoug power flow through this connector causing me going crazy. Now my blackberries are amaizing again! Hope it helps!

Solution Manager ChaRM Issues when Upgrading Satellite System

When upgrading a satellite system that is connected to Solution Manager's Change Request Management, is there anything that we need to be aware of?
Will Change Documents still be able to go to completion (Production status) if we modify the landscape from the time the Change Document is In Development to the time it is moved to Production?
1. Normal Correction (In Development) Development (ECC 5.0) -> Quality (ECC 5.0) -> Production (ECC 5.0)
2. Landscape is changed to Development (ECC 6.0) -> Quality (ECC 6.0) -> Production (ECC 5.0)
3. Normal Correction moved to To Be Tested -> Consolidated -> Production
Will the Normal Correction be in error because the landscape changed for the iBASE?
Are there any other lessons learned that anyone has experienced with Change Request Management or Implementation during and after an upgrade?
Thank You,
Carlen
Edited by: Carlen Yuen on Jan 13, 2009 1:50 AM
Edited by: Carlen Yuen on Jan 13, 2009 1:51 AM

Thanks Subhashini!
We had issues updating the Task List in the past. After we update the landscape and refresh the project and update the Task List, do you foresee any other problems?
Are there any additional items we should look out for? For example, we understand it is a requirement to release all transports prior to beginning the upgrade. However, since the release of the transport locks the change into the cycle for the next production move, this will present a problem if the change is not yet ready to be moved into Production. Do you have any further insight to any additional issues such as this?
Thanks again!
Carlen

When I try to run a form I get a message of Jinitiator version too Low

I've run my first form of Oracle Forms on google chrome but I get the following message:
"FRM-92095; Oracle Jinitiator Version too Low. Please install version 1.1.8.2 or higher"
I can't understand.
From the control pannel of Windows XP I see "Jinitiator 1.3.1.22"
I use Forms 10.1.2 on Oracle vers. 10gXE
Thanks in advance!

The Oracle Jinitiator is not compatible with modern browsers. In fact, Oracle has discontinued Jinitiator and no longer supports it's use. Michael is right, you should install the latest Java 6 runtime (JRE 1.6.0_33) and use it instead of Jinitiator.
Since Oracle Forms 10g defaults to using the Jinitiator, you will need to modify your configuration to tell the Forms to use the JRE Plug-In (JPI) instead of Jinitiator. Take a look at Oracle 10gR2 Forms Services – Using Sun's Java Plug-in for information on how to update your configuration to use the JPI.
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

FRM-92095: Oracle JInitiator version too low!

Hi everybody,
After I upgraded my Macbook Pro to the latest java of Oracle Java ver7 update 9 I am stuck.
I cannot luanch oracle from on an ERP V12 installation gettling the following error:
FRM-92095: Oracle JInitiator version too low.
I have try to follow the links to deinstall Java 7 and reinstall java 6.
The problem after this is the browser keep on say plugging missing and took you to the site to reinstall java 7 upgrade 9
I tried the site: http://support.apple.com/kb/HT5559
but it didnt work too...
Please help.
MacBook Pro 13", OS X Mountain Lion (10.8.2)

When I login from my Windows/Xp client machine to my Linux Server running R12.1.1. I get the message below:Was this working before? If yes, any changes have been done recently?
"FRM-92095; Oracle Jinitiator Version too Low. Please install version 1.1.8.2 or higher"
I really do not know what this means. Oracle EBS R12 comes with JRE so you are not supposed to download any Jinitator version. If you already have one installed, please uninstall it (via Control Panel > Add/Remove Software) and check then.
Can some one give me the steps on how to fix this issue--when I open a form from the client machine.Can you reproduce the issue using a different browser? What if you try from a different machine?
Please run AutoConfig and make sure it completes successfully.
Thanks,
Hussein

FRM-92095 Oracle Jinitiator Version too low - dsiplayed on client machine

Hi,
When I login from my Windows/Xp client machine to my Linux Server running R12.1.1. I get the message below:
"FRM-92095; Oracle Jinitiator Version too Low. Please install version 1.1.8.2 or higher"
I really do not know what this means.
Can some one give me the steps on how to fix this issue--when I open a form from the client machine.
Thank you, in advance for your help.
Edited by: user565503 on Aug 26, 2011 9:52 PM

When I login from my Windows/Xp client machine to my Linux Server running R12.1.1. I get the message below:Was this working before? If yes, any changes have been done recently?
"FRM-92095; Oracle Jinitiator Version too Low. Please install version 1.1.8.2 or higher"
I really do not know what this means. Oracle EBS R12 comes with JRE so you are not supposed to download any Jinitator version. If you already have one installed, please uninstall it (via Control Panel > Add/Remove Software) and check then.
Can some one give me the steps on how to fix this issue--when I open a form from the client machine.Can you reproduce the issue using a different browser? What if you try from a different machine?
Please run AutoConfig and make sure it completes successfully.
Thanks,
Hussein

Hellow my i pod is not working.actually bettry was too low then i puted on charging.it starting charging but not going to power on.when it tried to starting on sunndly after the apple logo it showd the 5 % bettry and went back off and this proses is carry

hellow
my i pod is not working.actually bettry was too low then i puted on charging.it starting charging but not going to power on.when it tried to starting on sunndly after the apple logo it showd the 5 % bettry and went back off and this proses is carry on.plz help me how it witt work starting.i urgently need to on my i pod.plz help me plzzzzzzzzzzzzzzzz

Hi there shehla sattar,
I would recommend taking a look at the troubleshooting steps found in the article below.
iPad: Basic troubleshooting
http://support.apple.com/kb/ts3274
-Griff W.

Image sits too low on screen in Photoshop CC when I want to start working.

When I have the image set to 'fit screen' it sits too low in the working space. Something has changed and I can't get it back. I have tried to restore settings but no effect. Any suggestions welcome?

My screen looks like this. Note how the image that has been opened sits rather low in the working space. In fact, a little bit of the bottom of the image has been clipped off despite going to the magnifying class and clicking 'Fit Screen'
It is intensely irritating and never used to be like this. I am using the latest CC update and have Mavericks. It appears like this when I double click the image in Bridge to open in Adobe CC. I can find no way to drag the image up a bit or reset anything.

Background volume too low even when turned up to 200%

I'm just making my first film with iMovie '08. I can't seem to get the volume of an audio clip to play louder. I purchased a specific song on iTunes. I then brought it into my movie as background music. I've turned up the volume to 200% and reduced all of the audio clips to 15%. This is driving me crazy! Can anyone tell me what I'm doing wrong? The background audio is just too low and I can't seem to increase it.
Thanks for your help.

When you play music from iTunes can you play it at full volulme? If so, it is not the MBP it is either something to do with the MP4 player (what are you using for that) or the conversion.

All-in-one PC volume is too low even when maxed out

When playing web content with sounds like youtube videos, the sound is too low even when the volume in the cotrol panel is already maxed out. what do i do? My desktop is an hp 22 all-in-one touchsmart pc.
Thanks!
Cynch

Hello @Cynch,
I understand that you are having issue with your HP TouchSmart 22 All-In-One Desktop PC where the volume is low when listening to online content. I would be happy to assist you, but first I would encourage you to post your product number for your computer as there are various version of the HP TouchSmart 22. I am linking an HP Support document below that will show you how to find your product number. As well, if you could indicate which operating system you are using. And whether your operating system is 32-bit or 64-bit as with this and the product number I can provide you with accurate information.
How Do I Find My Model Number or Product Number?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

When I send project to iTunes the volume is too low. I have auto normalize checked.

When I save project to itunes the volume is too low on the entire project. I have auto normalize checked. I have been sure to reduce the volumes below the red clipping dots. This includes the master volume. It is fine in GB, but in itunes I need to increase the volume slider to max to bring it up to what I was hearing in GB. Is sthere something else I should do to reproduce more volume when I share a project to itunes? Thank you.

DId you try a comparioson when exporting the same song with and without "Auto Normaize".
Technically there is the possibility that "Auto Normilize" will reduce the overall level of your final mix. If there is a short spike above 0dB that you don't hear as an audible pop and GarageBand brings down the overall level to that that spike to 0dBFS, and by doing so, lowering that level of your mix by that amount.
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals/
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

Just installed IOS 7.0.2 (11A501) on Iphone now the sound when I play music is too low even when I crank it as loud as it will go. I used to be able to hear it when I mowed the lawn. not anymore. any suggestions?

just installed IOS 7.0.2 (11A501) on Iphone now the sound when I play music is too low even when I crank it as loud as it will go. I used to be able to hear it when I mowed the lawn. not anymore. any suggestions?

This should solve the problem
Settings > General > Reset > Reset All Settings
It will not erase any of your personal data, just reset the settings.
Hope this helps.

Jinitiator too low 1.1.8.2 when upgrading to jre 1.7.0.45 - alternative solution??

Similar Messages

Maybe you are looking for