JIT schedule lines not created automatically

Hello All,
I'm not able to get the JIT schedule lines automatically for some of the scheduling agreements. I'm familiar with the SA process and schedule lines, but never came across JIT and SA release. Can anybody help me to provide possible reasons of not getting the JIT schedule lines created for SA.
Thanks,
Amit

Hi,
Check following points -
1) Scheduling agreement is released.
2) In Source list of the material, the Scheduling Agreement & the relevant line item is mentioned. In the MRP area the option '2 - Scheduling Agreement delivery schedule generated automatically.
3) If required quota arrangement is also maintained.
Regards,
Prashant

Similar Messages

  • Schedule Lines not created from MRP

    Hi !!
    I have a finished product ""111-2523-64"" and in its BOM i have a semifinished product ""111-2523-64-010"" produced(Inhouse)& three raw materials .
    For the Raw Materials I have made the scheduling agreement & source list with indicator ("2"" create schedule lines automatically""
    Problem -: Now when I run the MRP using T-Code MD02 the system is planning the finished & semifinished product 
    *but no schedule lines are created for the raw materials.*
    Please Guide , Itz very urgent.
    Regards
    Rahul Bhardwaj
    9909986406

    Dear Rahul,
    When u r running MRP maintain '3' for Delivery Schedules Field under MRP Control Parameters ( T Code MD02). Sheduling Agreement should be valid. If there is sufficient stock on hand compared with the requirement then system will not create any Schedule Lines. In material master of raw Materials on MRP2 view Procurement Type should be Maintained as 'F'. If u have maintained 'E' or 'X' then MRP run will not create schedule lines.
    Regards
    Sunil Kumar

  • Automatic schedule lines not creating after MD03

    HI Gurus,
    When I am running MD03 system is creating Pur. Requisitions instead of Schedule lines
    I am running with
    NETCH
    2
    3
    1
    1
    1
    29102011
    Data maintained
    1.Material master /vendor master Auto po ticked (MRP type VB ROP 500 ,Safety stock 600, current stock 200)
    2.Sch. Agreement created with LP (validity period, Qty ok)
    3.Pur. Info rec maintained for vendor material for the plant.
    4.Source list maintained with Vendor,scheduling agreement no ,item no, MRP indicator 2 Fixed vendor ticked
    Now after Running MD03
    Pur. Req created for 400 qty
    but when I click on Procurement proposal manually I can select Del. Schedule and create
    but system is asking Agreement no. item,qty etc (I already maintained Source list system is asking again )
    Then why not system creating automatically..
    Please help..
    Thanks in advance

    Thanks  Jürgen,
    It was a problem of Date ,validity period of the SA.
    which I sort out any way thank you. for your input

  • Order schedule lines not created using BAPI_SALESORDER_CREATEFROMDAT2

    Hi experts,
      I am creating sales order using BAPI_SALESORDER_CREATEFROMDAT2. I want to update the Order quantity in VBAP-KWMENG.I got the information from SDN when including the Schedule line in BAPI 'BAPI_SALESORDER_CREATEFROMDAT2  '.
      I tried by using Update flag = 'I'.I am not able to update, what are the values to be passed and how to update the field.
    Is there any other way..Please suggest me..
    Thanks&Regards,
    Karthik.

    Hi, In the BAPI if you look at the tables parameter you will find ORDER_ITEMS_IN and ORDER_ITEMS_INX as well as ORDER_SCHEDULES_IN and ORDER_SCHEDULES_INX. To update KWMENG you will have to pass that value to ORDER_ITEMS_IN-TARGET_QTY and update the same in the table ORDER_ITEMS_INX (ORDER_ITEMS_INX-TARGET_QTY) with 'X'.
    For updating schedule line go for ORDER_SCHEDULES_IN-SCHED_LINE and update X for the same in ORDER_SCHEDULES_INX.
    Try looking into the following code, I am filling in both the Item data as well as the Schedule line data.
      loop at t_mdata into fs_mdata.
        fs_item-itm_number  = fs_mdata-posnr.
        fs_itemx-itm_number = c_flag.
        fs_item-material    = fs_mdata-matnr.
        fs_itemx-material   = c_flag.
        fs_item-target_qty  = fs_mdata-kwmeng.
        fs_itemx-target_qty = c_flag.
        fs_item-item_categ  = fs_mdata-pstyv.
        fs_itemx-item_categ = c_flag.
        fs_itemx-updateflag = c_flag.
          APPEND fs_item TO t_item.
          APPEND fs_itemx TO t_itemx.
        fs_sline-ITM_NUMBER  = fs_mdata-posnr.
        fs_slinex-ITM_NUMBER = c_flag.
        fs_sline-SCHED_LINE  = c_sline.
        fs_slinex-SCHED_LINE = c_flag.
        fs_sline-REQ_QTY     = fs_mdata-kwmeng.
        fs_slinex-REQ_QTY    = c_flag.
          APPEND fs_sline TO t_sline.
          APPEND fs_slinex TO t_slinex.
      endloop.                             " Loop t_mdata
    c_flag contains 'X'.
    fs_item is of structure ORDER_ITEMS_IN.
    fs_sline is of structure ORDER_SCHEDULES_IN.

  • Schedule lines not generated after MRP run

    Dear All,
    I am trying to create Schedule lines through MRP run , but instead system creates MRP element PRqRel  and its PurRqs when i check in MD04 ,  the following are the prerequisite i done before MRP run , but still Schedule lines are not generating.
    1.activated checkbox source list in material master.,Procurement type is F, MRP type PD , lot size MB , marked JIT  Scheduling indicator as 1 in Pur view of material master , no MRP group is used in our process.
    2.Maintained Inforecord.
    3.Maintained source list for the material and marked MRP relevant as 2. Validity also checked.
    4. Quota arrangement for this vendor only.
    5. Created New scheduling agreement.
    6. Material is not sent for subcontracting.
    7. Ran  MD02 with following parameters ,
    Processing key NETCH Net Change in Total Horizon
    Create purchase req. 1 Purchase requisitions in opening period
    Delivery schedules 3 Schedule lines
    Create MRP list 1 MRP list
    Planning mode 3 Adapt planning data (normal mode)
    Please let me know if i am missing something
    Thanks in Advance
    Benny

    Hi,
    Please check the below links...
    Schedule Lines not getting created in MRP
    Schedule Lines not generated for MRP Type PD
    Kuber

  • Make to order production - schedule line not confirmed

    Hi,
    I created a  " make to order production " having few normal materials & few supersession materials.
    created PO, GR,invoice, all done.PO is updated in sales order.
    Schedule line is automatically confirmed for normal materials, but not confirmed for supersession materials.
    can anybody tell me , how schedule line can be automatically confirm for supersession materials.
    Thanks.

    Is your scenario a third party one? After you finished GR for the PO, have you checked inventory of those materials? But I still didn't understand what's difference between new material and "supersession" old one? New for what and old for what? Could you be more specific or any example will be helpful.

  • Schedule lines not covering  the total order Quantity

    We have an issue  with Schedule lines
    Order created on  19-02-201
    Material =M
    Requirement type =KSV
    Order Quantity =2500
    Delivered Quantity=1700
    Schedule Lines
    Date               Order quantity       Confirmed Quantity        Delivered  Quantity
    19-02-2010     801                                        0
    19-03-210       500                                        0
    16-04-2010      500                                    500                                       500
    14-05-2010      500                                    0
    15-06-2010     0                                        500                                        500
    15-06-2010      0                                        500                                        500
    18-06-2010      200                                   200                                         200
    Item  Status
               Processing Status
                                         Overall status=Completed
                                         Delivery Status= Fully Delivered
    1)Even though we have not delivered the total Order Quantity 2500,Delivery Staus is Fully Delivered Why?
    2)Why the system not created SCHEDULE LINES for the remaining Order Quantity  2500-1700=800

    Check if there are still requirements existing for this order on MD04.
    You might also want to check how the availabilty is carried out, whats the replinishment lead time - anything mentioned there. Generally if you take RLT into consideration - then the unfulfilled qty is shown at the end of RLT.
    Not too clear at this moment on the dates you have mentioned, bit hard to read.
    Am curious too, why this is happening.

  • Sales order Schedule line not showing in prod. order

    Hi
    I am using Make-to-order production. In my production order i can able to see the sales order number, item number but not able to see the schedule line number. It is showing zero. But in table VBEP table when i checked, system gives the sales order number (eg.1511632), item number  (10) and schedule line number (0001).
    Why in production order screen and AFPO table i am not getting schedule line number(field name-KDEIN).
    Regards
    Ganesh M

    Hi,
    When an item has more than one schedule line, the system automatically assigns a unique number to each line. The number is displayed in the details screens for schedule lines.  The schedule line number serves internal purposes and does not, for
    example, determine the sequence of schedule lines in the overview screen. The schedule lines on the overview screen are sorted by date.
    Please go to Sale order view from MD04, Click on Item no. and go to schedule line tab page, now you can see the line items and if you want to see in detail click each line item, it will show line item number clearly.
    Regards,
    Santhamoorthy

  • Schedule Lines not picked up in 2LIS_11_V_SSL

    Dear All,
    We have a new process setup for third party orders which are created with a load time of 50+ days.As soon as order is saved, Purchase Requisition (PR) is created on the shipping plant. This PR number is display in item schedule line
    If customer is on credit hold at order creation time, the purchase requisition is not created. Order could be saved as u201Cincompleteu201D.
    From what I see the first schedule line always created with order qty as 0 and it is being filled in the 2nd schedule line in some of the cases.
    My problem is the SAP BW extraction for DS 2LIS_11_V_SSL hasn't picked up data for schedule lines for any of such type of orders into my ODS till date.
    Is there any way to correct this or any manual way I can write a custom DS with FM to fill a similar extract structure like 2LIS_11_V_SSL, but it contains many dynamic fields which will get difficult to fetch manually ...
    Please suggest ...

    Hi ,
    If scheduled line is deleted  recordmode will be "R" and this will delete the whole line in DSO2.
    If a schedule is then created or changed only new data coming from schedule line DSO will be added in DSO2 as a new line. This will corrupt values in DSO2
    To handle this situation, replace the record mode of all the records to "X" from "R" in the start routine between DSO1-->DSO2.
    Thanks

  • Scheduling Lines not deleted during Product Heuristic

    Hi All
    During Planning run in PPDS, Surlplus Schedule lines are not getting deleted. The Heuristic using is Planning of Standard lots in 3 horizons. Earlier these schedule line were created based on Dependant demand. Since the dependant demand is deleted, we were expecting that the surplus schedule lines gets deleted during Planning run. But it is not happening.
    Please note that the surplus schedule lines are well with in the Horizons defind in the heuristic.
    Interesting point here is, in RRP3 view, if we execute variable heuristic using heuristic Planning of standard lots, it is perfectly deleting Excess Schedule lines
    whereas it is not with heuristics Planning of standard lots in 3 horizons
    Am I missing any settings here?
    Please let me know
    regards
    Vijay

    Hi Rohit
    Thx
    Let me implement and get back to you
    Thank you very much again
    regards
    Vijay

  • Excise Invoice Not creating automatically

    Hello!
                      while doing Billing document using VLO1N,Excise invoice is not creating for a particular material. I checked Material Master for this particular item.I compared the Material Master for the item which is creating Excise Invoice automatically and the for the item Excise Invoice not creating automatically. Every thing is same for both the items but the excise invoice is creating automatically for one material and same Excise invoice is not creating automatically for another item.I don't know where is the exact problem is.could anyone tell me why the Excise Invoice is not creating for the particular item.
    -M.Suba

    Excise Invoice creation depends on Customizatoin of Excise group which is specific to Plant.
    Check Customization settings-
    IMG: Logistics General - Tax on Goods movements - INDIA - Basic Settings - Maintain Excise Group,
    select your excise group & choose details,
    You will observe, check box " Excise Invoice during Billing" in 'Outgoing Excise Invoice' section. This check box should be marked.
    Note: To create Billing documents - Tx :VF01 is used , not VL01N ( this is for Creating Outbound Delivery document)
    Regards,
    Reazuddin MD

  • Settlement rule not created automatically

    HI All,
    Every time when i create a maintenance order , system did not create settlement rule automatically ,  when i click on settlement rule it ask with default or without default and cancel , when i click on with default the only settlement rule generated , please tell  where is the gap , it should come automatically
    Thanks in advance
    Armaan

    Hi You can not create automatically at creation, Please check the following IMG setting to make it mandatory at some point so that system will generate it automatically.
    Plant Maintenance and Customer Service>Maintenance and Service Processing>Maintenance and Service Orders> Functions and Settings for Order Types> Settlement Rule: Define Time and Creation of Distribution Rule
    Other wise try User Exit IWO10027
    Thanks,
    SS

  • Schedule line getting created for material whose stocks are maintained

    Hi Friends,
    I am having an unusual problem of schedule line getting created for material whose stocks are there in the system. I have created an SO for some material, and all the material is having sufficient qty in the system but still the system is generating schedule line.
    Can someone please advice what could be the problem and the solution to it.
    Regards,
    Wasim.

    Hello Wasim,
    - In TCode MM02, Check Scheduling in MRP2 Tab of Material master (if MRP is active.)
    - In Tcode OVZ9 - AvC control, for your Availability check maintain (eg. 02) in material & Checking Rule:A-SD order.
    Whether Check availability without replenishment lead time is unchecked, as this Indicates whether, during the availability check, the system checks the replenishment lead time. So, Items for which the delivery date falls within the replenishment lead time, but for which there is no inventory, are confirmed for delivery after the replenishment lead time. In the case of items for which the delivery date falls after the end of the replenishment lead time, the system assumes that everything can be confirmed.
    Thanks & Regards
    JP

  • Outbound delivery not created automatically

    Good Day,
    A STO posted from a supplying plant to a plant creates an automatic outbound delivery.
    When creating the STO with the same supplying plant and plant but a different material the automatic outbound delivery is not created.
    What settings should apply to the material as this seems to be the only different input between the two STO.
    The config settings seem correct as the automatic outbound delivery does happen when a different material is used.
    Thanks
    Lindsay

    Hi Lindsay,
    Check this note:
    1069448 - Outbound delivery not created automatically in ME21n for
    STO
    Also, note that this thread should be moved to Logistic Execution space. This way you can get more helpful answers.
    Kind Regards,
    Mariano

  • BDC not creating automatic delivery for consignment fill up in VA01

    Hi,
    I am doing BDC for consignment fill up in VA01. When munually run VA01, it automatically creating delivery. But when run BDC ( call transaction ) it's not creating automatic delivery. why ? I am giving below fields..
    Sales org.
    distribution channel
    division
    customer
    item (material)
    quantity
    batch
    pricing condition
    price
    serial number
    please help me...
    Venkey

    VA01 is order creation, Creating an order does not automatically create a delivery, a delivery is created with VL01N in reference to an order.
    Further you should get an error log if you process a BDC, what does it tell you?

Maybe you are looking for