JIT Scheduling Agreement Not getting saved

Hi Gurus,
while saving a JIT scheduling agreement LZJ type in VA31 t-code, i am getting the following error;
"Call usages for LP 30075000 and JIT customer SAJ4 do not match. Message no JIT00 801"
can anyone of you let me know what setting is missing.
its urgent to proceed with testing...
thanks in advance
Sunil

Sunil,
If i am right you may have to check the following for "Controlled delivery profile" to function properly;
1. Ship to party in JIT agreement
2. Ship to partner description against JITV partner description
3. Usage field at header and item level in agreement
4. Shipping point
5. Route.
If all these are ok, then the error should go and document should get saved.
Regards,
Syed Nasir

Similar Messages

BI Scheduler is not getting started.

Hi all,
I have just Installed BI 11.1.1.5 on the server but i don't know my Scheduler is not getting started .
I can open Analytics .I can work on answers ,I can open BI Publisher .But when i see the EM,Then it is not 100% i,e BI is no started .
Even wheni try to restart it is not starting.
Environment is Windows 64 bit
Need your help guys because we need to Implement this on Monday but i got struck on this
Thanks
Xavier
Edited by: Xavier on Aug 20, 2011 7:26 PM

[2011-08-21T20:16:40.000+00:00] [OracleBISchedulerComponent] [ERROR:1] [] [] [ecid: ] [tid: 2244] [68008] Scheduler Error: [nQSError: 93001] Can not load library, onsclient.dll, due to, The specified module could not be found. [[
[2011-08-21T20:16:40.000+00:00] [OracleBISchedulerComponent] [ERROR:1] [] [] [ecid: ] [tid: 2244] [68008] Scheduler Error: [nQSError: 93001] Can not load library, onsclient.dll, due to, The specified module could not be found. [[
this is from nqscheduler log
[2011-08-21T19:13:29.000+00:00] [OracleBIServerComponent] [WARNING:1] [] [] [ecid: ] [tid: 17e8] Warning: Clustering and cache are enabled for this OBIS node, but cluster aware cache is disabled. This can lead to inconsistencies.
[2011-08-21T19:13:31.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 00i2PwAbhr1Fw0zwzP067z2QCWi1z2mzl0001^w000000] [tid: 17e8] [36007] Loading repository Q:\BI\instances\instance1\bifoundation\OracleBIServerComponent\coreapplication_obis1\repository\SampleAppLite_BI0001.rpd.
[2011-08-21T19:13:31.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 00i2PwAbhr1Fw0zwzP067z2QCWi1z2mzl0001^w000000] [tid: e74] [14055] Loading subject area: SampleApp Lite ...
[2011-08-21T19:13:31.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 00i2PwAbhr1Fw0zwzP067z2QCWi1z2mzl0001^w000000] [tid: e74] [14056] Finished loading subject area: SampleApp Lite.
[2011-08-21T19:13:31.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 00i2PwAbhr1Fw0zwzP067z2QCWi1z2mzl0001^w000000] [tid: 17e8] [58002] Query Cache loaded with 0 entries from saved cache files.
[2011-08-21T19:13:31.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 00i2PwAbhr1Fw0zwzP067z2QCWi1z2mzl0001^w000000] [tid: 17e8] [85003] MDX Member Name Cache subsystem started successfully.
[2011-08-21T19:13:31.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 00i2PwAbhr1Fw0zwzP067z2QCWi1z2mzl0001^w000000] [tid: 17e8] [85004] MDX Member Name Cache subsystem recovered entries: 0, size: 0 bytes.
[2011-08-21T19:13:32.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 00i2PwAbhr1Fw0zwzP067z2QCWi1z2mzl0001^w000000] [tid: 17e8] nqsserver:     Clustered Oracle BI Server (64-bit) started. Version: 11.1.1.5.0.110427.1127.000.
[2011-08-21T19:13:34.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 00i2PwAbhr1Fw0zwzP067z2QCWi1z2mzl0001^w000000] [tid: ea0] [43071] A connection with Cluster Controller sunny-THINK:9706 was established.
[2011-08-21T19:33:32.000+00:00] [OracleBIServerComponent] [ERROR:1] [] [] [ecid: 00i2PwAbhr1Fw0zwzP067z2QCWi1z2mzl0001^w000000] [tid: 1428] [nQSError: 12002] Socket communication error at call=recv: (Number=10004) A blocking operation was interrupted by a call to WSACancelBlockingCall.
[2011-08-21T19:51:31.000+00:00] [OracleBIServerComponent] [ERROR:1] [] [] [ecid: 00i2PwAbhr1Fw0zwzP067z2QCWi1z2mzl0001^w000000] [tid: ea0] [43065] The connection with Cluster Controller sunny-THINK:9706 was lost.
[2011-08-21T19:51:38.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 00i2PwAbhr1Fw0zwzP067z2QCWi1z2mzl0001^w000000] [tid: d5c] [43071] A connection with Cluster Controller sunny-THINK:9706 was established.
[2011-08-21T20:02:47.000+00:00] [OracleBIServerComponent] [WARNING:1] [] [] [ecid: ] [tid: 1aa0] Warning: Clustering and cache are enabled for this OBIS node, but cluster aware cache is disabled. This can lead to inconsistencies.
[2011-08-21T20:02:50.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 00i2Pyuzq_EFg4WFLzrI8A0001e^000000] [tid: 1aa0] [36007] Loading repository Q:\BI\instances\instance1\bifoundation\OracleBIServerComponent\coreapplication_obis1\repository\SampleAppLite_BI0001.rpd.
[2011-08-21T20:02:51.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 00i2Pyuzq_EFg4WFLzrI8A0001e^000000] [tid: 1968] [14055] Loading subject area: SampleApp Lite ...
[2011-08-21T20:02:52.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 00i2Pyuzq_EFg4WFLzrI8A0001e^000000] [tid: 1968] [14056] Finished loading subject area: SampleApp Lite.
[2011-08-21T20:02:52.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 00i2Pyuzq_EFg4WFLzrI8A0001e^000000] [tid: 1aa0] [58002] Query Cache loaded with 0 entries from saved cache files.
[2011-08-21T20:02:52.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 00i2Pyuzq_EFg4WFLzrI8A0001e^000000] [tid: 1aa0] [85003] MDX Member Name Cache subsystem started successfully.
[2011-08-21T20:02:52.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 00i2Pyuzq_EFg4WFLzrI8A0001e^000000] [tid: 1aa0] [85004] MDX Member Name Cache subsystem recovered entries: 0, size: 0 bytes.
[2011-08-21T20:02:55.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 00i2Pyuzq_EFg4WFLzrI8A0001e^000000] [tid: 1aa0] nqsserver:     Clustered Oracle BI Server (64-bit) started. Version: 11.1.1.5.0.110427.1127.000.
[2011-08-21T20:02:57.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 00i2Pyuzq_EFg4WFLzrI8A0001e^000000] [tid: 1cfc] [43071] A connection with Cluster Controller sunny-THINK:9706 was established.
[2011-08-21T20:16:02.000+00:00] [OracleBIServerComponent] [ERROR:1] [] [] [ecid: 00i2Pyuzq_EFg4WFLzrI8A0001e^000000] [tid: 1cec] [nQSError: 46066] Operation cancelled.
[2011-08-21T20:16:02.000+00:00] [OracleBIServerComponent] [ERROR:1] [] [] [ecid: 00i2Pyuzq_EFg4WFLzrI8A0001e^000000] [tid: 1cfc] [nQSError: 46066] Operation cancelled.
[2011-08-21T20:16:04.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 00i2Pyuzq_EFg4WFLzrI8A0001e^000000] [tid: 1aa0] [43031] :     Oracle BI Server shutdown.
[2011-08-21T20:16:04.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 00i2Pyuzq_EFg4WFLzrI8A0001e^000000] [tid: 1aa0] [85008] MDX Member Name Cache subsystem statistics - Entries: 0, Sizes: 0 bytes, Overall Queries: 0, Hits: 0(0%), Misses: 0(0%).
[2011-08-21T20:16:04.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 00i2Pyuzq_EFg4WFLzrI8A0001e^000000] [tid: 1aa0] [85007] MDX Member Name Cache subsystem stopped.
[2011-08-21T20:16:04.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 00i2Pyuzq_EFg4WFLzrI8A0001e^000000] [tid: 1aa0] [58001] Query Cache Statistics -- Hits:0(0%), Qualified Misses:0(0%), Unqualified Misses:0(0%).
[2011-08-21T20:16:04.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 00i2Pyuzq_EFg4WFLzrI8A0001e^000000] [tid: 1aa0] [14058] Unloaded all subject areas.
[2011-08-21T20:16:32.000+00:00] [OracleBIServerComponent] [WARNING:1] [] [] [ecid: ] [tid: 20d4] Warning: Clustering and cache are enabled for this OBIS node, but cluster aware cache is disabled. This can lead to inconsistencies.
[2011-08-21T20:16:33.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 00i2Pzg567lFg4WFLzrI8A000118000000] [tid: 20d4] [36007] Loading repository Q:\BI\instances\instance1\bifoundation\OracleBIServerComponent\coreapplication_obis1\repository\SampleAppLite_BI0001.rpd.
[2011-08-21T20:16:34.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 00i2Pzg567lFg4WFLzrI8A000118000000] [tid: 1ec4] [14055] Loading subject area: SampleApp Lite ...
[2011-08-21T20:16:34.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 00i2Pzg567lFg4WFLzrI8A000118000000] [tid: 1ec4] [14056] Finished loading subject area: SampleApp Lite.
[2011-08-21T20:16:34.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 00i2Pzg567lFg4WFLzrI8A000118000000] [tid: 20d4] [58002] Query Cache loaded with 0 entries from saved cache files.
[2011-08-21T20:16:34.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 00i2Pzg567lFg4WFLzrI8A000118000000] [tid: 20d4] [85003] MDX Member Name Cache subsystem started successfully.
[2011-08-21T20:16:34.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 00i2Pzg567lFg4WFLzrI8A000118000000] [tid: 20d4] [85004] MDX Member Name Cache subsystem recovered entries: 0, size: 0 bytes.
[2011-08-21T20:16:34.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 00i2Pzg567lFg4WFLzrI8A000118000000] [tid: 20d4] nqsserver:     Clustered Oracle BI Server (64-bit) started. Version: 11.1.1.5.0.110427.1127.000.
[2011-08-21T20:16:48.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 00i2Pzg567lFg4WFLzrI8A000118000000] [tid: ab0] [43071] A connection with Cluster Controller sunny-THINK:9706 was established.
[2011-08-22T00:56:54.000+00:00] [OracleBIServerComponent] [ERROR:1] [] [] [ecid: 00i2PzgaOQmFg4WFLzrI8A000148000000] [tid: 1fc4] [nQSError: 43126] Authentication failed: invalid user/password.
this isi from nq server log
thanks
Xavier

While Creation Of SaleOrder Char Values are not getting saved.(V C)

Hi SAP gurus,
One of my client can able to create a saleorder but when we go and see in VA03 Display mode,we found Charactrestic values getting miised out.What could be the probale reasons.
Note: I Have stimulate the required combination as per my client requirement in CU50,here i can able to indentify the Green Sign,but While Creation Of SaleOrder Char Values are not getting saved.
Awaiting for your valuable reply.
Cheers,
Kumar.S

Kumar ,
If you assign values in classification view or configuration profile they will become default for the product, and it willnot be changed in sales order.
another thing if the item category is incorrect you will not get the configuration pop up at all .
problem what i understand from your thred is at the time of sales ordeer creation there is some inconsistances in the configuration , may be some condition is not fullfilling.
If in CU50 the result shown are error free, same configuration should owrk properly in sales configuration process, please again try to create it in sales order with same value assignment also check all the messages.
see the result of configuration before saving the sales order , i hoep it will work for you.
I am assuming all the things from SD are properly configured ie item catageory, varient pricing etc.
Check and revert back.
Regards
Ritesh

MessageRadioButton Value is not getting saved

Hi All,
I am facing an issue with Radio Button data.
When the page loads all the "No" buttons will be selected by default.When I select "Yes" radio buttton and click on "Save", all the radio buttons will get reset to "No" and same value will get passed further. Value of "Yes" button will not get saved.
Please help me in resolving this issue.
Thanks,
Akshata

Give it a shot by trying this. Hope this helps you.
OAMessageRadioButtonBean personButton =(OAMessageRadioButtonBean)webBean.findChildRecursive("Person");
personButton.setName("partyTypeGroup");
personButton.setValue("PERSON");
personButton.setSelected(true);
OAMessageRadioButtonBean orgButton = (OAMessageRadioButtonBean)webBean.findChildRecursive("Org");
orgButton.setName("partyTypeGroup");
orgButton.setValue("ORGANIZATION");
To retrieve the value of the Radio button, which is selected use the below
System.out.println("Radio Button Value : "+ pageContext.getParameter("partyTypeGroup"));
Also, if on click of button, you should once again set the radio button by calling setSelected() to retain the same look n feel, else, the selection wud jump to the other radio button.
Basically, developer guide says, that you cannot assign the group name or checked/unchecked value to the Radio button declaratively). For more information read
Radio Group / Buttons in Developer guide.
Thanks
Saurabh
Edited by: SaurabhAg on Mar 22, 2012 12:58 AM

Output type not getting saved in the PO

Hello Team
we are facing one issue where output type is not getting saved in the PO.
we give one output type and than save it , after going back to the PO we see that it is not there.and no output issued
the PO is released properly and there is no issue , any idea what could be the reason for it

Hi,
Check in SU3 t.code, did check box selected u201CDelete After Outputu201D in Spool Control segment in Default TAB
Also check Partner Function VN maintained in Default values TAB in NACR--- > EF Application for your output type
Cross check partners {VN, PI, GS) are assigned to your PO output type in Partner Roles per Message Type
Regards,
Biju K

Added new fields in vendor master in xk01 but data is not getting saved

Hi experts,
To add new fields in vendor master i have followed the following steps :
1.) Appended a structure ZRTGS in LFA1 table with required fields and activated
2.) Added new button in xk01( vendor master ) using spro -> logistics-general -> business partner -> vendors ->
control ->adoption of customer's owaster data fields -> prepare modification free-enhancement of vendor master record
Created a screen group ZR and defined label tab pages with function code ZRTGS and saved entries
3.) Created a implementation for BADIs VENDOR_ADD_DATA and VENDOR_ADD_DATA_CS.
4.) Created a program with my own subscreen for the required fields
The button is getting displayed in XK01, XK02 and XK03 respectively. Whenever the button is clicked the subscreen with
the fields is also displayed. But whenever i try to save the data in either XK01 or XK02 it is not getting saved in to the
database table LFA1.
Request your help in this regard.
Thanks in Advance.

Hi,
You may need to check this include .
EXIT_SAPMM06E_008 -->Import Data from Customer Subscreen for Purchasing Document
Thanks,
vamshi

Maintenance schedule is not getting generated

Hi....
Past one year, maintenance schedule is not getting generated.
Could you please let me know to where i have to look out for this problem in Equipment & Functional Locations?
What are all the fields will be mandatory and triggering the maintenance schedule / Notification in Equipment / Functional Locations?
Need your response at the earliest.
Regards,
Mohd Ali.

Hi
There May be several resons...
Check Whether Maintenace for perticualr maintenance plan is not scheduled... their could completion requirement tick might selected previous maint. not done for the equipment.
Check any scheduling for inactive equips/fl
check any long offset has been set....
check while scheduling any sortfield key is set or genral...if pertiucalr sort key is belong to Eq/fl which will not help
regards
krish

File not getting Saved on Application Server

Hello All,
We created a file in "Automatic Payment Transactions (F110 Transaction)" and are able to save the text file on Local drive. But for our e-banking requirement we need to store this file on our application server. The configuration settings in OBPM4 are already done and now system is picking the default application server path while saving file in "Payment Medium - > DME Administration" transaction. The problem is - although the system is picking the required path of application server but file is not getting saved. The error coming is: File <path> could not be opened (Message Number: FZ231).
We have checked for 777 authorisations (OS authorisations) for the folder.
Please suggest that what can be done to resolve th issue.
Regards,

What exactly we need to check in Payment program? We are not able to save the file on application server. There is no problem while saving the same in local drive.
Regards,

Inbound Idoc - Date fields not getting saved

Hello,
I have created inbound idoc scenario in SAP. I receive Idoc from non SAP system to SAP system.
then data from IDoc is saved into different tables, for that I have written one function module (attached to process code)
One of the segments in IDoc type has date as a field. It is of type sy-datum.
When I receive Idoc in SAP only date fields are not getting saved in tables.
Is anything specific need to be done for date fields? please advice.

check which format you are getting into sap and make sure you are coverting in into required format.

Billing document not getting saved

Hi Gurus,
I am facing a problem with th billing doument. When I try to save the Billing through VF01, it is going to the screen and showing the line items in it. And when we save, it is generating a billing document number.But it is not getting saved.And when go and see in VF02
it is showing a message <b>Express document "Update was terminated" received from Author----
"</b>.
How to resolve this.PLS help me out in this.
Thanks in Advance
Regards
VASU

Hi Vasu
Check whether number range assignment has done. Most probably, you would not have done that.
Incidentally, I had also faced similar problem sometime back and after lot of study, I could come to a conclusion that it is because of non assignment of number range.
Thanks and dont forget to reward if this helps you.
G. Lakshmipathi

Workflow message modifications not getting saved into database

Hello Friends,
I am working on iProcurement module (11i) and have a requirement to remove the 'View' & 'Edit' links which appear in notification/Emails in Requisition Approval Workflow.
I found a metalink note "How to Remove Related Application Links From Approval Notifications for AME [ID 1100805.1]" for the same.
We have to delete some attributes from the workflow message to remove the links but the same is not getting saved in database.
I am uploading the wft file through Workflow Definition Loader program with the 'force' option. And to check the changes , i am again downloading the file but i could not see the changes.
Can't attributes be deleted from the message?
Any suggestions ?
Thanks...
Regards,
Amit

Hi Hussein,
Thanks.
Here are the details :
RDBMS : 11.2.0.2.0
Oracle Applications : 11.5.10.2
OS : Windows XP
Log :
Concurrent request completed successfully
Current system time is 01-DEC-2011 08:29:12
Oracle Workflow Definition Loader 2.6.4.0.
Access level: 20, Mode: FORCE
Uploaded 3 ITEM_TYPE record(s) to database.
Uploaded 55 LOOKUP_TYPE record(s) to database.
Uploaded 32 MESSAGE record(s) to database.
Uploaded 182 ACTIVITY record(s) to database.
Uploaded 0 ROLE record(s) to database.
Regards,
Amit

Document type created not getting saved

Hi all,
In DC10 I created document type and saved but its not getting saved?
I gave document type as CD and description as COREL DRAW and tried to save it, but its not getting saved and asking to fill the required fields so I filled
Version no. Inc as   1
class Type as      017
and class as     cl0001
and in Field selection:
Class data as display
document status as *Display and then tried to save but the save option is in hide mode.
what is a characteristic and why do we require and how to give the naming convention or numbering to it?
Because I cant see the previously created chars?
Please answer
Thx

Thanks Aby for answering
how to name the class and class type ?
I can see the class types but not class, is it a number or any other name ?
How to create character and what is the naming convention?
if I created a class and class type and character for a document type in DC10 then will they be shown in display screen CV03N?
Thx

Load remote images in html mail setting does not get saved. I have to turn it off every time I log in. Is this a bug?

Load remote images in html mail setting does not get saved. I have to turn it off every time I log in. Is this a bug?

Plug your phone into the wall charger for at least 30 minutes...make sure you have a sim card in the phone...then:
Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.
Make sure you have no anti-virus software running or any firewalls...turn all of that stuff off.

Adobe form - Text field not getting saved.

Hi All,
We created an application in which user will enter the data and submit it . The details entered in the screen will be saved in the Ztable.
Our problem is when the user enters the data in the TextField UI of the adobe form it is not getting saved in the table. In development its working fine.
In production for few users it is getting saved and for few users it is not getting saved.
We are not able to find out the root cause of the problem.
Any help will be appreciated
Best Wishes
Idhaya R

Hi Idhaya,
As you said it is working for few users,
Then you need to check Adobe reader installed for users who are having problem.
Hope it helps.
Regards,
Arun

Bom item data - Document assignment not getting saved in table STPO

Dear All,
              As per out customer requirement, they want to display assigned drawing documents of Bom items in CS11. But it is not reflecting in cs11 eventhough we have assigned documents in Bom item detail overview Document assignment tab page. Moreover this is not getting saved in table STPO.
               Waiting for solutions
Thanks & Regards
Dhananjay Kulkarni

Please understand my customers requirement,
                           Presently they are assigning drawing document of each mat in material master. And if they want to see the drawing of each component of bom through Bom maintenance then they double click on component in bom, goes to mat master then additional data then document data and then drawing. In this way they need to open minimim 5 windows, which they want to make minimum 2 windows.
          In bom they are having more than 300 components. This is not possible to define document as component with item category D of so many components. One more idea I given to them is to club all drawings in one document and define that document as component with item category D, but in this way they can't identify the individual drawing with part name.
          One more idea I given to them is to assign drawing document of individual component in item overview - Document assignment tab page from where they can open the drawing but it needs to open minimum 3 windows. So they are ready to assign drawing document in item overview - Document assignment tab page but they want, it should reflect in CS11 document column, from where they can easily open the drawing document.
          One more thing I observed that, assigned document to item overview - Document assignment tab page is not getting saved in Table STPO. I can't see this field content in STPO, which may be the reason that it is not reflecting in CS11.
         Is anything missing from Document management system?
Please think and reply friends it's Urgent.
Thanks & Warm Regards
Dhananjay Kulkarni

JIT Scheduling Agreement Not getting saved

Similar Messages

Maybe you are looking for