Jittery motion with stills when exported to Quicktime

I've been producing photographic AVs with FCE for a few years now and I've run into a problem with the latest version (3.5).
Any time I use keyframes to do a Ken Burns effect it gets all jittery when exported to Quicktime. Everything plays back fine within FCE - it's only when exported that the problem occurs. The problem didn't exist (for me) with version 3. It seems to be exacerbated by adding a transition but it happens even when there's no transition.
Has anyone experienced this or have any idea what I might be able to do to remedy it.
regards and thanks
powerbook 1.5ghz 1.25 GB RAM Mac OS X (10.4.7)

That's what you did when you switched the field
dominance to none, but you see you didn't see any
effect when you did that.
No, none at all.
I have a fairly major show on Friday night (it's Wednesday pm here now) so I'm thinking I might spend the night redoing it in iMovie. I'm disappointed because I've been doing them in FCE for a few years now and this is the first time I've seen a problem. The only thing which has changed is the jump from 3 to 3.5.
Many thanks for your suggestions.
//kk

Similar Messages

Problem with Audio when exporting to Quicktime

I'm running a trial of Adobe Flash CS5 on a Windows PC. I used audio [set to Stream] in the project. The original audio was recorded in 16 bit and 44kHz using Cubase LE4, and was exported in [.wav] format. It works fine and plays back normally when I try 'Test Scene' or 'Test Movie' within Flash. However, the export isn't working right.
I exported the movie into Quicktime format [.mov]. I set the export audio to 16 bit and 44kHz, which was the same rate that the original sound was recorded in. No matter which audio compression I use, [or without compression at all], the final Quicktime file sounds like it is 8 bit, and the quality is greatly reduced. Just to experiment, I tried exporting with 8 bit audio- at this setting the movie played back with even worse audio quality [and a considerable amount of static], and I am assuming that it has been reduced to 4 bit.
For some reason, Flash must be cutting the bit rate in half, no matter what settings I use. Does anyone know how to solve this? Any help would be greatly appreciated.

Try using MPEG Streamclip to convert the videos; more information on this issue is available in this article.
(28341)

Audio doesn't work when exporting to Quicktime

Hi there.
I've imported a FLV file with audio into a Flash file. When
previewed as a swf, the audio works, but when exported to
"Quicktime Video" (not the "Quicktime" setting) the audio doesn't
play.
I've double checked my Quicktime settings (ie the audio isn't
Disabled, and i've tried Animation, Video, None and MPEG-4
compression) but the audio still doesn't play.
The weird thing is, if i have a Quicktime movie playing in
Quicktime and then open my Quicktime Video file from Flash then the
audio in the first Quicktime cuts out.
Also in Quicktime the info on the Quicktime Video from flash
says it has a Audio Track with the settings I exported it out as,
but I'm still not getting any audio.
Does anyone know what's going on?
Thanks in advance

Anyone?
or is my question not making sense?
Thanks in advance

IMovie 11 crashes when exporting to Quicktime

iMovie 11 crashes when exporting to Quicktime. Some people have posted that this problem disappeared when they upgraded from Lion to Mountain Lion. However, I am running Mt.Lion and it still happens. If there is no fix for this bug, does anyone know a workaround that will produce the same ultimate result..namely, a Quicktime movie that is not too large to attach to emails. Apple, please fix this. Thank you.

Update after two Apple iApps specialists spent 1.5 hours on the phone with me: There are 3 "poison pills" (that we know of) that will cause the crash if any of the three is part of the movie: Picture-in-picture, side-by-side, or a circle open/close transition. Otherwise, no crash. The specialist made a movie on his own computer, containing the poison pills, but he exported to Quicktime without a crash. There is at least one report in the threads of a problem like mine. Thus, some Gremlin is causing this, in some computers. The iApps specialist was curioius to know whether a lot of people have this problem, or only a few. (If a lot, then it is worth submitting to the engineers to fix.) He said if you have this problem, call Apple. I asked if such people should post a "Me too!" on this thread. He said no, better to call Apple and report it. So that's the story. I can live without those poison pills in my export-to-quicktime movies. I am just a consumer, not a pro, and I can live with it. But it would be nice if Apple could fix this.

Build/Transition times off when exported to Quicktime

I have four Keynote presentations I have built, each of which has several Quicktime movies placed on multiple slides (not the same movie multiple times). I then have Keynote text and shape objects "interacting" with the movies as they play. In Keynote, I have set my build and transition times to perfectly match the content of the Quicktime movies.
Example: I have a movie that was captured from my screen wherein I select various menu items. In Keynote, as the various menu items are selected in the movie, I have Keynote text and arrows pointing to the relevant areas of the movies. "Click File...", "...then Save As..." etc. Looks great when presented in Keynote.
When exported to Quicktime (full size, high quality, Sorensen Video 3) the timing gets worse as the movie progresses, to the point that at the end some of my timings are off by almost 10 seconds or more!
Any ideas why this happens? The export to Quicktime is happing on a dual-processor 2.7GHz G5 with 4GB RAM... should be more than adequate!
Robert

Cheers for that, Kyn. Funny, I spent about two hours reading through page-by-page all the forum topics to see what issues people were coming acorss BEFORE I posted. Don't know how I missed this one though! Guess I should try searching next time.
Thanks,
Robert

Help me, I have a problem with font when export report to PDF?

Hi everyone! Help me
I have a problem with font when export report to PDF
My report uses template .rtf with font Times New Roman (Unicode), language is VietNamese.
when desige template no problem, error only happen when view report by PDF.
Edited by: user10236405 on Oct 15, 2008 11:23 PM

give it time to boot. the time depends on yr memory size n data. soon a process bar will appear indicating the boot process. if still this doesnt work. try formating the phone. but this ways u lose all data on the phone (unless u backed it). relax! the data on the memory card is safe.

Final Cut Express FCE Crashes when exporting to Quicktime or Quicktime conv

Final Cut Express FCE Crashes when exporting to Quicktime or Quicktime conversion!
This started completely out of the blue last night. The export gets about 30-50% done and FCE disappears from the screen and the "FCE quit unexpectedly" message pops up. This has never happened before and I was doing exports of this very project all week. All other projects won't expect, the current project won't export when brought into a new file, I tried reinstalling FCE, and I deleted the pref files spoken about in the forum.
Any Ideas!!!????

Try repairing permissions and re-boot.
Al

6 minute Keynote with video clips keeps crashing when Export to Quicktime?

I have a very important presentation I need, it has some video clips in I created in LiveType, and I export to Quicktime, using the default settings, it keeps crashing. The last time I tried it was this morning, it processed for 2 hours, at the last slide was when it froze up and crashed my computer. I am in desparate need of help. What am I doing wrong? I am using Quicktime Pro 7.0.4
Thanks in Advance for your reply to my Post,
Sebastian

I have a very important presentation I need, it has some video clips in I created in LiveType, and I export to Quicktime, using the default settings, it keeps crashing. The last time I tried it was this morning, it processed for 2 hours, at the last slide was when it froze up and crashed my computer. I am in desparate need of help. What am I doing wrong? I am using Quicktime Pro 7.0.4
Thanks in Advance for your reply to my Post,
Sebastian

Trouble with 2nd audio track when exporting to Quicktime - please help!

Ok - I've made my DV movie in IMovie - all ok. When I export to Quicktime the second audio track (an mp3 imported from iTune) jumps up in volume unexpectedly but always in the same place. There is no such jump in the original and I haven't put in any nodes to boost the volume etc.
Any ideas guys??
Thanks
Les

Hello,
Further reading and search in this forum make me think I was right : it seems to be an iMovie 6 bug.
http://discussions.apple.com/thread.jspa?messageID=2037970&#2037970
I would suggest to have the maximum number of person reporting a feedback to Apple to get a quick fix
http://www.apple.com/feedback/imovie.html
Thanks
Seb

When exporting to Quicktime, areas in shadows are grainy and pixelated

Shot short film on Canon HD (AH A1) 16:9 24fps. Looks great in the editor, however I cannot seem to figure out the settings to export to Quicktime so that I have a nice clear picture when blown up to large format (50" plasma and larger format, i.e. movie theater screen)
Anything in a shadow looks grainy and pixelated when exported.
I need help with my size, codec, data rate, frame rate etc. If anyone has the magic combination please let me know. I am on a deadline. Thanks!

Hello Nick Holmes,
thanks for the reply.
I deleted all the rendering files (using Rendering Manager) from the sequence and I rerender it again using ALT+R.
Nothing has changed. Corrupted pixels are still there.
So I created a new HDV 1080/50i Sequence in which I put only one HDV clip imported from the camera by FCPX.
I exported that in 4 different ways:
QT Reference Movie – Corrupted pixels;
QT Movie Self-Contained – The same corrupted pixels as above;
QT Movie Self-Cont + Recompress All Frames – No corrupted pixels;
QT Conversion to Apple Pro Res 422 – No corrupted pixels but different colors (due to Single Field).
The clip I put in the Test Sequence has not need to be rendered: I can edit and play it natively.
I also tried to export a part of the original sequence I'm working on.
That's odd: parts that needed to be rendered (text) are great, HDV footage has still that issue.
I don't seriously understand. Should I transcode my HDV footage to Apple Pro Res 422 and always use that codec in my future HDV workflows?
Thanks in advance.
Alessandro.

General error when exporting to Quicktime from FCE

I've built a slideshow with still photos, text, and audio. I've done this at least 20 times. When I start exporting to Quicktime, as I want to burn a dvd in iDVD, the export stops at 27% completed and I get a "General Error". there is no explanation. I've rendered the single sequence many times and it says ok. It plays fine in FCE but won't export to Quicktime. How do I correct the problem?

I think I had the same problem that you are now having. I would get unexpected errors when trying to:
1) Log and Transfer videos to external hard drives.
2) Save my exports to an external Hard Drive.
3) Copy large video files to the External Hard Drive.
Assuming that you are using an external hard drive, chances are that isn't formatted correctly. It cannot be formatted in FAT32 or else large files (usually video) over 4GB cannot transfer. It may be that the file you are trying to export is larger than 4GB. If it is currently formatted FAT32 it needs to be formatted to Mac OS Extended. Hope I was of some help.

Font color changes when exporting to quicktime

Hi,
I'm creating some animated text via LiveType; importing into FCE; and then exporting either as mpeg-4 (for youtube) or directly as a quicktime movie (to see supposedly the best video).
The font colors look the same between LiveType and FCE; however, when I export to quicktime (as a quicktime movie) or to mpeg-4 (h.264 encoder), the font colors look washed out. Both the .mov and .mp4 look about the same. So, I went back to LiveType and cranked up the intensity of these colors (looking pretty saturated in LiveType and FCE). When I repeat the export, the colors are still washed out compared to what I see in FCE and LiveType; but they are now probably acceptable in quicktime and web viewing.
Is anything thing I can do to make the font colors more consistent between FCE and an exported quicktime or mpeg-4 file? Can anyone suggest another converter that might be better at preserving font color? I've tried plain mpeg-4; h.264; etc.
tia.

Thanks for the reply. It was created using Apple Pages. I tried exporting to PDF in two different ways, both with the same result.
1. Within Apple Pages, one can click File > Export > PDF
2. The other option is to click Print > PDF > Save as PDF
I also tried this second method with Microsoft Word, and again the color was altered. Any suggestions that you can provide to resolve this issue will be very helpful.

AUDIO CLIPPING/DESTROYED WHEN EXPORTED TO QUICKTIME

Hi folks! Does Bob need your help today!
I am working on a sequence in Final Cut Pro. When I play it in the timeline, the audio sounds fine. However, when I export it to Quicktime, it is a lot louder and the audio clips like crazy (distorts/sounds destroyed). I am really in trouble here and just can't figure it out. I'm going nuts! All I want is to have what I have in the timeline exported as it is.
Some details to help you help me:
- although it sounds good when played in the timeline, the audio does stray into the red. I don't see why this should matter since it sounds fine in the timeline - this is all I want when exporting.
- I have one video track and several audio tracks.
To all who do, thanks so much for helping me.

Going into the red with digital audio is not the same as when it happens with analog audio.
With digital sound the signal is being truncated and as you remarked, quite literally being destroyed.
Redlining analog audio, is introducing distortion but there is still "headroom" and in reasonable doses it can give you a nice fuzzy feeling.
Bottom line -don't let your digital audio signal go into the red.
Have a look at the keyword searchable, Final Cut Pro User Manual in FCP's Help menu bar item, where this is explained in more detail.
Your search term for the day "Audio Levels, Meters, and Output Channels".

Header of ALV with space when exported to excel using Standard ALV

Hi,
I am Using Reuse alv grid display    to dispaly my report and it works fine and I am using the standard SAP application tool to export it to excel.
But for some of the header fields I am getting space in the excel sheet but there is no space while displaying through ALV.
I am using the following field catalog for the same.
wa_fieldcat-col_pos = 10.
wa_fieldcat-fieldname = 'SOLLWERT'.
wa_fieldcat-seltext_l = 'text-t10'.      "Target value (* this has no space here)
wa_fieldcat-outputlen = 32.
wa_fieldcat-colwidth_optimize = 'X'.
APPEND wa_fieldcat to it_fieldcat.
but there are still space for this Colomn when exported to excel if after optimizing the column.
kindly suggest what field needs to be passed to the field catalogoe to avoid spaces in excel for the header.
Thanks
Ritesh

hey all,
Thanks everyone for the reply.
I am using the foloowing field cat:
l_col_pos = l_col_pos + 1.
    wa_fieldcat-col_pos = l_col_pos.
    wa_fieldcat-outputlen = 32.
     wa_fieldcat-fieldname = 'SOLLWERT'.
     wa_fieldcat-inttype   = 'P'.
*    wa_fieldcat-tabname = 'i_final'.
    wa_fieldcat-seltext_l = text-t11.         "Target Value
    APPEND wa_fieldcat TO i_fieldcat.
    CLEAR wa_fieldcat.
I have use this also in the field cat but stil i get space in the excel header.
wa_fieldcat-REF_FIELDNAME = 'SOLLWERT'.
*    wa_fieldcat-REF_TABNAME = 'QAMV'.
Also the space comes with the descrip[tion in the cell of excel.
its like [space Target Value] and i dont need this Space.
I have also used wa_layout-colwidth_optimize = 'X'. but it doesnt wrk.
Please suggest

FCP project not the correct aspect ratio when exporting to Quicktime

Hello All;
I am trying to export a FCP project in its native resolution (1440 X 1080) to Quicktime but everytime I try, the aspect ratio is messed up and people look taller and thinner than they should.
The project is a resolution of 1440 X 1080 as determined by examining the sequence settings in FCP.
I configure quicktime (see below) to a resolution of 1440 X 1080.
So why isn't my Quicktime video the correct resolution when I play it with the IMac's Quicktime player ? I shrink the player to 1/2 size to fit it all on the screen.
My exact settings are below ...
Export - Using Quicktime Conversion
Format - Quicktime Movie
Video Settings - Compressor - MPEG-4
Quality - Best
Not sure if I changed the framerate - if I did, I probably changed it to 29.97
I didn't touch the other settings in the video settings - left them to default
I didn't change the filter settings - I left them at default
Size - 1440 X 1080 (The actual resolution of my source video)
I checked the box - preserve aspect ratio using letterbox (If applicable)
Other settings were left at default
Sound Settings - Format - AAC
Rate - 48 KHZ
Render Settings - Quality - Best
Target Bitrate - 128 KHZ (This was left at default - I did not change it)
Prepare for Internet Streaming - Fast Start checked (This was default - I did not change it)
All other settings not specifically mentioned were left at default.
Thanks. Tim

I don't have much of an answer for you, but to test try not checking the preserve aspect ratio. Rather than reexport the entire 1 hour just export 10 seconds so that you can trouble shoot different things.
Hope that helps a bit,
Eric

Jittery motion with stills when exported to Quicktime

Similar Messages

Maybe you are looking for