JJ Form - Output type issue

Hi Friends,
I've created a JJ Form(Smartform) and it's to be called by material document number thru tcode MB02 or MB90.
For this, My MM consulatnat has also created a new output type in ME-inventory management with my calling print output program 'RLE_DELNOTE' and my form name.
But when calling the output thru Tcode MB02/MB90, the Form is not coming out and it saying output could not be found....and also in log, it says,
Note: Log not from current processing run
Processing log for program RLE_DELNOTE routine ENTRY
There were no deliveries that matched the criteria you specified.
FYI...
If i assign my inventroy management calling program, it says the output could not be found and Processing routine in program ZMMSS0002 does not exist.
(my smartform working fine while executing thru FM)
Pls advise me, where i did the mistake and how to assing my calling print program and form routine.
thanks & regards
sankar.

Hi,
The print program: RLE_DELNOTE which you are refering is the right one? In mysystem it is been assigned to different output types like LD00 etc, which all comes under application V2 which is related to Sales.
Where as Mateial document does not comes under Sales.
Please check with your functional consultant, whether your have assigne the correct program, under correct application type.
Cheers,
Ashok

Similar Messages

VL02N Output type issue.

Hi,
When I execute the tcode VL02N for any output type (ZEU5) for print preview and external mail then it is giving error that "Output could not be issued".
I have also checked the config of NACE , it seems to be ok.
So what are the other possibilities of this error.
Thanking you in advance,
Regards,
Vikram

Configuration of NACE does not make all the difference. The only way to come to the solution is to debug from point when button is clicked for print preview or etc.
Possible reasons may be there calling program before making a call to script or smartform encountering a problem. It may be that program is not able to get the desired data correctly from the tables or some other problem(Mainly due to subrc not coming to be 0).
Apart from this even if call is made successfully to the form but inside there could be problem like using command in smartform.
Thanks,
Mark

Output type issue

Hello,
I have created new Z* output type and done all confirguration related to this.
When trying to save this output type for one of the material doc. in transaction MB02 - > Details & Messages, am getting below message
"Express Document " Update was terminated " received from author "User id" "
When checked the same in SM13 transaction, following error message found :
Class : J3R_LEGAL_FORMS
Number : 022
" Number range error: number could not be generated for number range J3R FORMS (01). "
Is this realted to number range issue ? If so, how can i resolve this ?
Appreciate your help.
Thanks
Nag

Hi,
Please check with ABAP , seems output Form assignment error , not sure
Thanks
Diwakar

Multiple output types issue

Hello,
I configured two output types (Bill of lading & Packing list) for the application V7-transaportation. I am able to get both the outputs. Now, I am able to get a print for BOL and also a print preview. For Packing list I am able to see the screen view(print preview), but when I try to print it directly it gives me an error " output could not be issued" . When I go to Output-> screen it is showing me the output.
I have maintained all the required print parameters and assigned the print profiles to the output types.Is there a problem with my configuration? can't I print two output types simultaneously?

Hi,
Is there a printer defaulted to your output types? You can issue multiple outputs at the same time.
If the output types have been determined in your document, then nothing wrong with the determination process.
If the output can be previewed, nothing wrong with the SAPScript or Smartform.
So maybe something to do with compatibility with the printer chosen.
Phyllis.

EK00 Output type issues

We have an issue with EK00. We have the shipping points defined in VP01SHP but it does not create a EK00 for the shipping points. What else could be wrong?
Regards,
Davis

I found the issue. We had the wrong output type in OVLT.

PO Output Type Issue

Hi Gurus,
           I created New Output Types for PO (PrintOut & Fax).The Output for the Printer is working fine and when i am trying to use the Output type for Sending the FAX,it is throwing an error that "Cannot Process Message,No route from XXXXXXXX to 08-000-0000".
           I have checked and all the configs are done properly for both the types.Please let me know the solutions for the error.Thanks in Advance.
Thanks,
Nambi.N

Please check the config as per note 455140.
The two steps I would advise you to take with this issue are:
1) Confirm that the SAPConnect node you have configured for INT
   transmission is in use and
2) Confirm that there is a valid address area set up in this node, for
   roger_xu@DP&UPTX.COM - for example '' or '@DP&UPTX.COM'
Sanjeev

Form output type

Hi,
I have a form, how can I find out output type of that form.

Hi Shilpa,
Pls check this tables..
TNAPR , TRDIR Table for SAPScripts
STXFADM Table for SMARTFORMS.
Regards,
Viveks

Propose Custom Idoc, output type issue

Dear Experts,
I want to populate a custom idoc(Idoc already existing) by proposing the output type in the purchase order for which I created a output type and made an entry in Application 'EF' (NACE),
Also created a process code thru we41 and assigned both of these in the outbound parameters of the partner profile.
But for some reason I'm getting an error while propsing and saving the purchase order, Is there a way that I can identify why the error occurred.
Or can some one shed some light if I need to do any extra configuration if I'm playing with a custom Idoc.
Thanks for all
-Amit

>
Vinod Kumar wrote:
> Have you done the partner profile configuration in WE20. Have you mentioned message control? What is the exact error which is appearing while saving PO?
>
> Regards
> Vinod
Vinod,
I did all the partner profile configurationand maintanied message control too, While saving I'm not getting any error, but after saving, if I go back to the output type and see the output is in Red coulor (Indicating failure), I'm not sure how to check where the error occured.
Thanks
-Amit.

Version management output type issue

hi,
we have activated version management and all working fine .
but while taking print out through ME9F we have assigned to 3 output types (NEU,ZNEU,ZNIU) for a single PO , until and unless we take print for 3 output tyes we are not able to amend the PO .we are getting the below error .
"No new version created because a message has not yet been transmitted"
is there any option if we take print for one output type(ZNEU )out of 3 output types(NEU,ZNEU,ZNIU) it should allow us to do changes in PO .
please assist we need to close the requirement on priority .
thanks in advance

HI,
is there any option if we take print for one output type(ZNEU )out of 3 output types(NEU,ZNEU,ZNIU) it should allow us to do changes in PO .
No i don't think so system will create new version.
new version is created when you output PO completely
try this create pool request for other two message in Message tab in PO in ME22N and then try PO it will work
Regards
Kailas Ugale

Driver program for GI(goods issue) smart form output type WA01

Hi,
i have designed one smart form for GI o/p type WA01 for Tcode MIGO ,but could get any standard driver program becoz in our server the standard program is for the script and not smart form.can anybody help me in finding the standard driver program for trigerring the smart form.

Hi,
Try prog SAPM07DR.
Paras

Triggering program form(subroutine) from MIGO using output types gives lock issue with Bapi_sag_change

Hi,
On creating the GR from MIGO tcode, based on the quantity check i am updating the field ELIKZ using BAPI_SAG_CHANGE.
And updation logic is written in a zprogram using with in FORM XXXXX...ENDFORM XXXXX. ( FORM XXXXX is configured in the output type ).
So the problem i am facing is on creation of the first GR with scheduling agreement number GR is posted successfully and under the output tab the i can see the green icon.
But on creation of the second GR with same scheduling agreement its showing red icon. The following is the error message " User locked the scheduling agreement ...."
I even tried using dequeue fm and transaction commit, but it didnt work. Please let me know how to over come the lock issue.
Thanks & regards,
Manojkumar K

Solved it myself....
Regards,
Manoj

Script Form print issue with output type

hello,
i have maintained a output type for a purchase organisation in MN04, VN partner keep blank , medium 1 for print out and in date time : 4
output device is 'LOCL' "print immediately" and "release after output" are active in communication.
a message type generated when i created a PO, but it is a red light, and processing log is "Error in OPEN_FORM for document xxx".
after checked, custom script from caused this issue, but how to resolve this problem?
best regards,

Hello,
The error ME142 can have different causes like missing authorizations
or a terminated connection. Please see SAP notes 397691 and 532251. This note
states that is errors occur when purchasing documents are output, If
errors occur when purchasing documents are output, the system generates
an error message in the message log of the message overview. However,
error message ME142 'Error in OPEN_FORM for document &' contains only
the information that an error occurred and not the error cause. With the
attached source code, the error cause is also displayed in the error
message.
Regards,
David

Form for Output Type LD00

Dear Experts,
THis is regarding form for LD00.
I am from EH&S module.
For getting DG data on form, there is one std form in sap which is RVDELNOTE. The respective print program is RVADDN01
I have replaced this LE_SHP_DELNOTE with RVDELNOTE then I am getting error: Output could not be issued
As this is script and not the smartform, I have tried following two combinations In transaction NACE, but still error continue
Combination 1)
Medium: Print Output
Program: RVADDN01
Form Routine: ENTRY
Form:BLANK
PDF/SamartForm Form: RVDELNOTE
Type: BLANK
Combination 2)
Medium: Print Output
Program: RVADDN01
Form Routine: ENTRY
Form:RVDELNOTE
PDF/SamartForm Form: BLANK
Type: BLANK
again if I assign LE_SHP_DELNOTE, it is working fine..
on the other hand, RVDELNOTE is also Standard SAP Script. I have not done any changes in it.
Pls guide,,
Edited by: Amol Joshi on Jan 12, 2011 12:25 PM

Problem resovled at my own..
Thanks...

Printing the form using output type and Standard program

Hi all,
   I am a beginner on SAP.Now i get a doc for smartforms.
   It need to print a form.And need to create a output.I don't know how to create it and how to use it.
   And how to use the standard program to print the smartfroms.
   Can you give me a thought about that??

Hi steven,
first u copy the standard form and modify as u required.
copy the print program.
after that assign modify form to modified print program using NACE transaction code.
NACE->slect application->go with output types->select suitable one->go with processing routines->select medium->provide modified program name and form name->save the details.
go for view->go for transport.
go with the appropriate transaction suitable to your application.
and provide one existing record->issue out put->go with print
i think it will useful for you.
Reward points if useful.
Thanks,
Usha

Problem in output type determantion in smart forms

Hi all,
I have one problem in smart forms mentioned below:
In this program RVADOR01 i hav used RVORDER01 for displaying the output in the output type determination(print preview) for a particular quotation no.
In VA23 for a particular quotation I clicked on preview button and i got d output for smart form(RVORDER01).
Can u plz tell me where i can find that in which part of d program(RVADOR01) is d QUOTATION NO called.
so that i dont want to hard code the quotation no in the program.
Thanks
Regards
SANJAY CHOBDAR

not really helping you on the issue, but some things here need clarification i sense.
Outputtype determination has actually NOTHING to do with print preview.
In output type determination the output types for the actual document get determined via output schema which is assigned to either documenttype or itemtype.
RVADOR01 is the SAP-standard (SAP-SCRIPT) driver program for offers/orders.
RVORDER01 is the SAP-standard SAP-SCRIPT form for offers/orders.

JJ Form - Output type issue

Similar Messages

Maybe you are looking for