JKL Keys Don't Work Correctly in File Editor

I'm using STP v3. When I select a clip in the timeline of a multitrack project, using the JKL keys in the File Editor does not work correctly. Instead of playing from the current time of the playhead/CTI, it plays from the beginning of the selected clip. Is this normal or is it a bug? The JKL keys function properly in the timeline, but not the File Editor.
Thanks for any help,
Cuong

Search this forum (if the Search facility is working) for Wacom.  People have reported problems with Wacom's current drivers and pressure sensitivity.  I believe the current workaround is to downgrade to a slightly older version.  I have also seen it reported that Wacom is aware of and working on the problem.
-Noel

Similar Messages

  • What can I do if my function keys don't work correctly?

    QuestionWhat can I do if my function keys don't work correctly?
    AnswerFunction keys can mean a few different things. You might be having a problem with the F-keys near the top of your keyboard (F1, F2, etc.), the secondary functions of the F-keys (toggling the wireless or touchpad, for example), or special media keys on your laptop.
    There are a few steps you can take to try to resolve these issues. Try the suggestions listed below in the order presented. If a step fixes the problem, you're done! If a step doesn't fix your problem, continue to the next step.
    Understand the FN key
    First, ensure you understand how to use the FN key. In most newer models, the special utilities of the F-keys are used when you press the F-keys. To use the F-keys, you need to hold FN first. In older models, this was reversed. pressing the F-keys activated the F-keys. The special utilities of the F-keys are used while holding FN. If you're having trouble using your F-keys, try both with and without the FN key.
    Reinstall TVAP or Toshiba Flash Cards Utility
    Some models may use the Toshiba Value Added Package or the Toshiba Flash Cards Utility. Check the support site to see if these utilities are available for your model. If you see either listed, download and install it. Some models don't use these utilities; it's okay if you don't see either of them.
    How To: Identifying and locating the correct driver for your device
    Perform a power cycle
    Perform a power cycle on your laptop.
    How To: Proper Power Cycle Procedure for Laptops
    Perform a System Restore
    Restore your computer to a previous point when the keys were working correctly.
    How To: Understanding System Restore, Refresh, Reset, and, Recovery options in Windows 8 + Video
    How To: Perform a system restore in Windows 7
    Perform a System Reset
    If the previous suggestions don't help, you may want to try a System Reset (also known as a System Recovery). This returns the laptop to factory default conditions. Note that this means any data or application you added will be gone.
    How To: Understanding System Restore, Refresh, Reset, and, Recovery options in Windows 8 + Video
    How To: Perform system recovery - Windows 7
    Seek servicing
    If the System Reset didn't fix the problem, your computer could require servicing. Please call customer support.

    Contact Apple Support to get it serviced or visit an Apple Store or Authorized Apple Service Provider next to your place.
    iPhone - Contact Support - Apple Support

  • Aluminum Keyboard Function Keys don't work correctly

    I just bough a brand new aluminum wireless keyboard and some of the function keys aren't working, from F1 through F7. F9 works like F3 should and F12 like F5. It's so bizarre. Otherwise the keys all work fine. I've updated everything, tried working through the forums workarounds on the aluminum keyboard, and so far it didn't work for my computer. I'm pretty frustrated. Has anyone figured out the solution? I'm running 10.6.7 and have updated all my software.

    One last key combo to try, while holding SHIFT  fn  try toglling volume brightness... and see if that works. It'a been years since I've used anything but my built in keyboard.
    At this point Run software update with the keyboard connected and see if there may be an update for that.
    Try a SMC reset:
    http://support.apple.com/kb/HT3964
    Shut down the computer.
    Unplug the computer's power cord.
    Wait fifteen seconds.
    Attach the computer's power cord.
    Wait five seconds, then press the power button to turn on the computer.
    try a pram reset:
    Resetting NVRAM / PRAM
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.
    After resetting NVRAM or PRAM, you may need to reconfigure your settings for speaker volume, screen resolution, startup disk selection, and time zone information. If issues persist, your Mac's logic board battery (not a portable Mac's rechargeable battery) may need to be replaced. The logic board battery helps retain NVRAM/PRAM settings when your computer is shut down. You can take your Mac to a Mac Genius or Apple Authorized Service Provider to replace the battery on the logic board.
    If still no joy, contact Apple, or go to the store and find out what you may need to do, This was the bullet in my gun, I'm sorry I could not resolve this for you.It's probably something simple, or maybe your machine is too old to suport this device.
    Best of luck.
    If they get you going, please post back so others may find out the fix:>

  • Dreamweaver CS6: Page navigation keys don't work in Files window (Mac)

    Hi all,
    The home, end, page up and page down buttons don't work in the Files window of Dreamweaver CS6 on Mac OS X 10.7.3.
    They did work in any previous version of Dreamweaver.
    I wonder if anyone else experiences the same issue?
    It was very handy - and is expectd behavior - and hope Adobe can restore this functionality.
    Thanks,
    Leo

    Have you tried updating to 10.7.4?
    http://support.apple.com/kb/DL1525

  • Function keys are not working correctly

    I've been looking all over the various threads and I can't find an answer that solves my problem.
    Here are the details:
    I bought the computer in the U.S. where I live.
    I have a iMac 2.4GHz intel Core 2 Duo  EMC 2133 with a 20" screen. Bought it new in February 2008.
    I have Mac OS X 10.5.8  (I am waiting for my order for OS Snow Leopard to come in!!)
    I have been using a wireless mouse and Keyboard (Love not having cords!)
    Recently, my wireless keyboard got a short and quit working. I went down to the apple store and got a new wireless keyboard.
    I had the computer with me at the genius bar so, yes, the apple employee saw exactly what I have.
    I took it all home got the thing all put back together and got the new keyboard paired up and working with the computer.
    Here are the problems:
    Went to go use the function keys while using iTunes and found they weren't working properly. The F10, F11 and F12 do not control the volume of sound as the keyboard indicates they would, they instead activate dashboard, spaces, and application windows. 
    Following the advice of other threads, I looked over in the system preferences and made sure the "Use all F1, F2 etc." box was unchecked (it was unchecked), things still didn't work.
    I tried the fn key but it appears to not work at all it has no effect on the functioning of the function keys.
    I went under keyboard shortcuts in system preferences and found the F10, F11 and F12 keys, it confirms that those keys control spaces, dashboard and application windows as they are performing but shows no options to either reassign to volume control (as marked on the keyboard) or make the fn key work.
    I've gone back and forth trying various combinations of checked and unchecked boxes to see if anything would work, so far I've come up with nothing.
    A couple more important or interesting facts:
    Yes I have turned off and taken the batteries out of the old keyboard. My bluetooth connection currently shows it as disconnected.
    I have restarted the computer.
    One thing I find odd; when I go under preferences and go to Keyboard and Mouse when I go under the section "Bluetooth" it shows Bluetooth mouse with the name of the mouse and the battery level. BUT nothing is showing up under bluetooth Keyboard, I can't figure out how to change this and don't know if it is contributing to the problem.
    When I go under the bluetooth logo on the top bar I find the mouse and both keyboards referenced, the old keyboard is shown as disconnected and the other two are connected. I have tried to update the device's name but it doesn't seem to let me.
    I have double clicked on the device under bluetooth and it shows the new keyboard as discoverable, paired and connected. Hence, I am using the new keyboard to write this inquiry.
    Please, any assistance would be of great help. I have tried to be thorough in order help narrow the possible problem. Thanks!!

    Hendry
    Just thought I'd let you know.  Our suspicions were correct, it was the OS. After I installed Snow Leopard (10.6.8) all the problems were corrected.  I also updated the RAM from 1 gb to 6 gb. The mac is working all around better. Sorry it took so long to get back to everyone. My superdrive had pooped out. Rather than replace it I got an external drive from OWC connected with firewire 800.  So far everything is running very well, as far as I can tell this external drive is better than the original superdrive. My superdrive has always acted funny, infact I returned the first mac I got after a week because its superdrive was also malfunctioning. Anyway, all that to say everything seems to be fully functioning again.
    Roy
    Re: Function keys are not working correctly 

  • Fonts don't work correctly when opening illustrator 5 eps in illustrator 6

    When I open an eps file in illustrator 6, which I received from our graphic designer (who is using 5), the fonts don't work correctly. We have purchased VistaSans and when I try to open file, it says fonts not found so they have been substituted, but when I open illustrator, the fonts are there. When I try to change text from VistaSansReg to VistaSansSCBold the bold doesn't apper in illustrator or when saving to PDF - however, when you click the changed text in illustrator, it does show the bold font has been selected.

    HI,
    It is an open type font so should work, but it looks like the problem is that it hasn't installed correctly in Illustrator. I am using Windows 7 so right-clicked fonts and clicked install. Fonts appear in fonts area of control panel and install in disabled when font is viewed.  they work correctly in other apps, such as Word
    When I vew the VistaSans fonts (in existing file) in Illustrator, they appear in the fonts drop-down, but have an asterisk beside them (i.e. not installed) so how do I get them to install correctly in Illustrator? Font isn't appearing in Photoshop either.

  • CMYK gradient maps don't work correctly in Photoshop CS 4

    Gradient maps built with CMYK colors in Photoshop don't work correctly in CS4.  For one particular client I often use a brushed steel background. To control color shifts on the press I used a gradient map blending from C0 M0 Y0 K0 to C40 M20 Y20 K100. This has worked great in the past, but once you open that gradient map in CS4 and start editing that gradient at all, even if you edit it back to the original CMYK numbers, the colors shift drastically, and if you watch the info palette, the colors get totally remapped to a different black. I can go in a reset the black to the C40 M20 Y20 K100 mix, but it doesn't work. When I go back in, it completely changes them.
    Since this works fine in CS3 and not in CS4, is this a program bug? I'm not doing anything differently.
    It was a great way of controlling neutral gray mixes (and other color mixes) for CMYK printing. Is there a fix for this? Adobe, is anyone addressing this bug? I've read other threads on this, but with no solutions.
    Kent Bingham
    Digital Illustration and Design
    I couldn't attach the .psd files, so I uploaded here for reference:
    http://www.kentbingham.com/gradientmap-error.zip

    I have not gone back to check how this is handled in CS3 yet I could duplicate your problem in CS4.  The changing of numbers in the CMYK looks like it has to do with the color mangement settings in Photoshop.
    I was able to make sure the numbers input to the gradient map did not chang.  I did this by going to Edit>Assign Profile  and then clicked the option "Don't Color Manage this Document"    
    This may not solve your problem directly yet it does indicate that the problem you have (or that Adobe has) is related to how the color management is being handled.
    So one question would be are you using the "exact" color management settings in CS4 as you did in CS3 and were those in place when you imported the file into CS4.  If not, and if you did not have the correct warning options set, there may have been a color setting change of which you were not aware.
    While I was able to keep the original settings from changing in the Gradient Map, there was still a problem in CS4 where the Lab values would change (and the appearance on the LCD screen) after doing any color picker editing and changing the CMYK values back to 40 20 20 100.  This definetly seems related to the color model/probile/management system in place.  So it appears that even though I can get the CMYK numbers to stay and not change, there is still a bug when making no changes to the color management settings, and the CMYK values are the same, that the Lab values and the appearance on the screen change.
    Hope you can get Adobe's attention.  Looks like a bug to me.

  • Mac OS X: my arrow keys don't work in swf

    When I run a flash application in a browser, the arrow keys
    do not work. The space bar works, but no arrows. This is affecting
    games, mostly.
    I using 10.4.10, Safari 3.0.3, Flash 9,0,64,0
    What can I do to diagnose/fix this issue?

    Sarah1st wrote:
    My arrow keys don't work in MS office Word.
    that is correct, they do not (I use Office '11).  See if this helps: http://office.microsoft.com/en-us/mac-word-help/word-keyboard-shortcuts-HA102929 541.aspx

  • Power Key don't Work ?

    Hi Dears,
    I have an Ipad2 32G/3G . The Power Key of my Ipad don't work Correctly and I can't Restart or Power off my Device. How to repaire this .
    please Help to me.
    Thanks

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • New wireless keyboard & volume keys don't work

    I just replaced my wireless keyboard because a few of the keys stopped working. Now the volume keys don't work on the new one. When I push them one of them brings up my widgets and the others minimize the screen. Any Ideas?

    Put truly fresh batteries in the keyboard.
    Un-pair and re-pair the keyboard with the computer.
    Attempt the PRAM reset again.
    If you do not get the 2 boot chimes then I would suggest you reset using a USB keyboard. Any USB keyboard will do. If you don't get the 2 chimes when using a USB keyboard then either you are not holding down the keys correctly / early enough or there is something wrong with the computer itself.
    If you do get the 2 boot chimes you can then go back to the wireless keyboard and re-pair it.
    Take a peak at this article. It is fairly exhaustive in troubleshooting suggestions for this type of issue: http://support.apple.com/kb/TS3048
    Hope that helps.

  • Apple Aluminum Wired Keyboard: Special Keys Don't Work

    The keyboard has function keys that are programmed to perform special operations. The Apple website explicitly states:
    “The extended layout has a full complement of keys, including document navigation controls, a numeric keypad, and special function keys for Mac features such as brightness, volume, eject, play/pause, Exposé, and more.”
    Unfortunately, two of these keys don’t work, even after a special software update is installed:
    http://www.apple.com/support/downloads/keyboardsoftwareupdate11.html
    The manual that comes with the keyboard provides instructions on how to program the keyboard, but those instructions either don’t work or are incorrect.
    I've posted more about this and other keyboard issues here:
    http://web.mac.com/resourcesforlife/journal/writings/Entries/2007/8/21Apple_Aluminum_WiredKeyboard.html

    I am using a PowerMac Dual 2.5 GHz G5 system and had trouble with the F3 and F4 function keys. The various suggestions and instructions as provided on several of the discussion threads didn't work for me.
    Here's what worked for me to resolve the problem:
    1. Go here and download the Pacifist utility which helps in exploring installation packages:
    http://www.versiontracker.com/dyn/moreinfo/macosx/12743
    2. Go here and download the Apple OSX update for PowerPC:
    http://www.apple.com/support/downloads/macosx10410comboupdateppc.html
    OR... get the version for Intel found here:
    http://www.apple.com/support/downloads/macosx10410comboupdatev11intel.html
    3. Using the Pacifist utility, open the OSX Update dmg file you just downloaded. You will be able to navigate to /System/Library/Core Services. Click on Dock.app and click the install button. When it's uncompressed, it will ask if you would like to update or replace. Click replace. There is an option to repeat this response for all files. Complete the process and then exit the Pacifist utility program.
    4. Go here and download the Apple Keyboard Software Update:
    http://www.apple.com/downloads/macosx/apple/firmware_hardware/keyboardsoftwareup date11.html
    5. Install the Keyboard update and all functions should automatically work.
    If the above steps resolve the problem for you, please click on the "Solved" button above. Thanks.
    I've posted a lengthy review and support document for the new Apple Aluminum Wired Keyboard here:
    http://web.mac.com/resourcesforlife/journal/writings/Entries/2007/8/21Apple_Aluminum_WiredKeyboard.html

  • Keyboard Problems, Control-Option-Command Keys Don't work

    Hello and thanks.
    Have a iMac 2.4ghz Intel Core 2 Due with 2GB of RAM running 10.5.8 and suddenly the control-option-command keys are not working on my keyboard.
    Working fine and then suddenly no keys on my last row worked, including space bar. Scoured message boards and tried all fixes. Substituted keyboard with wireless (known working) and usb (known working) with limited results.
    Initially the last row of original keyboard didn't function at all and command keys seemed locked so couldn't type. Only did modifier key functions (open, close, find, et.c)
    The two different keyboards, wireless and USB, typed but the control, option and command keys don't work. Space bar works and the command key no longer locked.
    Things I have tried:
    1. Checked Universal Access settings so no sticky keys, etc.
    2. Check Speech settings, all correct.
    3. Replaced user, universal access prefs from point of which keyboard worked, no change.
    4. Cannot zap PRAM due to no working option or command keys.
    5. Reset SMU. Caused fans to go high speed. Unplugged computer from wall. Waited 10 seconds, replugged, fan now normal.
    6. Repaired permissions.
    7. Tried to repair disk but operation failed in middle of scan. Won't mount from any bootable CD.
    Currently the wireless keyboard works fine except I have no control-option-command key usage. Keyboard types fine and all other keys work fine.
    Suggestions? I'm very frustrated.
    Thanks in advance,
    Annie

    Upgraded to 10.6. Problems resolved.

  • Macbook pro 13inch,mid2010 qwertyu keys don't work after upgrade os x Yosemite

    macbook pro 13inch,mid2010 qwertyu keys don't work after I upgrade os x 10.10 Yosemite. but it works on keyboard viewer. I'm not sure if it's hardware or software problem, how can I fix it?

    Hello there, kipolo.
    Great job using the Keyboard viewer to troubleshoot your issue so far. The following Knowledge Base article provides a great checklists of steps to pinpoint the issue a bit further:
    One or more keys on the keyboard do not respond - Apple Support
    Some keys don't work as expected
    From the Apple menu, choose System Preferences.
    From the View menu, choose Speech.
    Click the Text to Speech tab.
    If "Speak selected text when the key is pressed" is enabled, the key or key combination set to speak text cannot be used for other purposes or used to type text--click Set Key and change it to a less-commonly used key combination (try to use modifier keys such as Shift, Command, Option, and Control). Or, disable the "Speak selected text when the key is pressed" option.
    Click the Accessibilty or Universal Access pane in System Preferences, then click the Keyboard tab.
    Make sure that Slow Keys is turned off. With Slow Keys on, you need to press a key for a longer period of time for it to be recognized.
    In the Accessibilty or Universal Access pane, click the Mouse tab, and make sure Mouse Keys is turned off. With Mouse Keys enabled, you cannot use the Numeric Keypad to enter numbers--instead the keypad moves the pointer (cursor). (There is an option to enable Mouse Keys with five presses of the Option key; you may want to turn that option off to avoid accidentally enabling it.) If Mouse Keys is enabled and you are using a keyboard with no numeric keypad or Num Lock function, see Unable to type while Mouse Keys is enabled in Mac OS X.
    If the function keys on the top row of the keyboard are not working as expected, see Mac OS X: How to change the behavior of function keys.
    If the issue persists, use Keyboard Viewer to help isolate the issue:
    Click the Language & Text pane (Mac OS X v10.6) or International pane (Mac OS X v10.5.8 or earlier) in System Preferences.
    Click the Input Sources tab (or Input Menu tab in Mac OS X 10.5.8 or earlier).
    Click the Keyboard & Character Viewer "On" checkbox to select it (click the Keyboard Viewer "On" checkbox in Mac OS X 10.5.8 or earlier).
    From the Input (flag) menu, choose Show Keyboard Viewer.
    If the keyboard is connected and detected by OS X, the keys you type will highlight in the Keyboard Viewer window. Open TextEdit (or any text application), and try to type something using the keys that were previously not responding to see if they highlight in Keyboard Viewer.
    Start from the Mac OS X Install Disc, choose Terminal from the Utilities menu and test the keys which were previously not working.  If the keys work while started from the Install disc, then the keyboard itself is working correctly.  Use How to troubleshoot a software issue to isolate the software issue that may be causing the keys to not respond.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Some keys don´t  work in SQL Developer 1.2

    SQL Developer 1.2.
    In SQL Worksheet the following keys don't work: space, backspace, start, end and enter.

    Hi hzapata, I know that it work fine, after Load preset, but why You lost the default configs?
    Is this my question to Smit.

  • Some keys don't work in combination with Shift

    Okay  so I have the Pavilion Sleekbook  15-b011nr 
    Serial Number:   [Personal Information Removed]
    Product Number:   C6N92UA
    and today I noticed certain keys don't work in combination with the left Shift for example, Shift+S (both left and right), Shift+M, Shift+Z, Shift +X, Shift+C don't work, shift+F does work but gives me this FV. same with j it gives me JM instead. I installed an updated bios, ran a diagnostic test using F2 and under the compenant test for the keyboard it failed and gave me this
    keyboard test failed
    failure Id # U375BD-6m96P5-MFPX1F-G03B03 
    product id # C6N92Ua#aba
    now while trying to type all this I found other letters now working as well as me not being able to input the semicolon with either shift key. frustrating since I got this laptop in June so it's still under warranty. Has anyone else encountered this problem and if so how do i fix mine? I'm pretty tech savvy so feel free to let me know, or is my only option is a replacement from HP?
    Thanks!

    Hi hzapata, I know that it work fine, after Load preset, but why You lost the default configs?
    Is this my question to Smit.

Maybe you are looking for