JL_Cmder restoring factory settings help

anyone familliar with the JL_Cmder program, to restore your blackberry back to factory settings, which mine would be v 4.3? does it actually work? thanks

it will reset settings back to factory but will not reset the device back factory version if you upgraded
if you upgraded to 4.5, it will reset the device back to as if you pulled it out of the box with 4.5

Similar Messages

  • I selected restore factory settings on my ipod touch but now after restart it stuck on apple icon what will i do anybody help me out plz,even it's not appering on itunes on my p.c

    i selected restore factory settings on my ipod touch but now after restart it stuck on apple icon what will i do anybody help me out plz,even it's not appering on itunes on my p.c

    Try:
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • Help my MAC OS X disc doesn't allow me to restore factory settings it just installs snow leopard and remains on my original user account?

    Help my MAC OS X disc doesn't allow me to restore factory settings it just installs snow leopard and remains on my original user account?

    You need to erase the disk first. From the 'Utilities' menu on the Install disk choose' Disk Utility; use this to erase the disk, then install the system plus (if it's the original install disk) any bundled applications.
    I'm going to state the perfectly obvious just to be on the safe side: 'Erase disk' does exactly that - everything on the disk will be gone.

  • I want to reset my ipad 2 but in the settings menu/general there is no reset button. this is the only way to restore factory settings from what i can see on internet. can anyone help?

    i want to reset my ipad 2 but in the settings menu/general there is no reset button. this is the only way to restore factory settings from what i can see on internet. can anyone help?

    You can restore the device within iTunes on your computer. This article will describe the process for you.
    http://support.apple.com/kb/ht1414
    On the iPad - Settings>General>Reset>Erase all content and settings

  • HT1212 I forgot my passcode and i have no backup of my Ipad, it is locked and disabled, can anyone help to restore factory settings atleast as a new ipad

    I forgot my passcode and i have no backup of my Ipad, it is locked and disabled, can anyone help to restore factory settings atleast as a new ipad

    Hey salosawaya,
    If you have never synced your device with iTunes and you forgot your passcode, you'll follow these directions:
    If you see one of following alerts, you need to erase the device:
    "iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."
    "You haven't chosen to have [device] trust this computer"
    If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
    Alternatively, place the device in recovery mode and restore it to erase the device:
    Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
    While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    Continue holding the Home button until you see the Connect to iTunes screen.
    iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.
    via: iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/HT1212
    Welcome to Apple Support Communities!
    Regards,
    Delgadoh

  • Hi, Right now as i connected my iPhone 5s to my mac in iTunes section it is asking for restore factory settings. I want help for this section that if i restore my iPhone will my applications be deleted or not?

    Hi,
    Right now i connected my iPhone 5s to my mac in iTunes it said that i should do a Restore Factory Settings, i wanted to know that if i do this will it delete my applications and Games from my iPhone or not.

    The Problem is that i cant get backup from itunes either,
    because as i connect my iphone the page of tunes popups with the message "Restore to factory Settings" And when clicking on ok it will go directly to the restore iphone page . there will be no option to backup

  • I just updated my iPhone 4 to iOS6.  In the process, I ran into a problem and had to restore factory settings.  After syncing the phone, I see that 218 apps need to be updated. When selecting "update all," it says "manage local device storage usage." How?

    I just updated my iPhone 4 to iOS6.  In the process, I ran into a problem and had to restore factory settings.  After syncing the phone, I see that 218 apps need to be updated. When selecting "update all," it says "Cannot Download.  There is not enough available local storage to download these items.  You can manage your local device storage usage in Settings."
    How can this be the case when I haven't changed any apps from before updrading to iOS6, and I don't have any music yet on the phone?  Why is it telling me there is not enough local space?

    Hi RileyAvaCadenRiver,
    If you recently updated your iPhone to iOS7, you will need to update iTunes on your computer to iTunes 11.1 or newer for it to correctly recognize the iPhone. You may find the following link helpful:
    Apple: iTunes 11.1.1
    http://support.apple.com/kb/DL1614
    Regards,
    - Brenden

  • Is there ANY way possible to MANUALLY restore factory settings for an ipod classic, FROM the device ITSELF (as opposed to restoring from iTunes or forcing a reformat elsewhere)?

    I have 3 iPods:  1 Touch and 2 Classics.  The Touch and 1 of the Classics are both working fine; the other Classic is not showing up in iTunes, My Computer, or in Device Manager.  While I CAN do a simple reset, it accomplishes nothing, and I am UNABLE to get the faulty Classic into "disk mode".
    Based on what I've encountered thus far, I have a suspicion that my faulty Classic somehow thinks it's formatted for the Mac, as I DO see the serial # and I do NOT see "Windows Format" in the About screen on the ipod itself.  Is that even POSSIBLE?  I have never used a Mac, but that's what the documentation I've read on this Support Site have lead me to believe.
    The faulty Classic will charge ONLY in a wall charger; it clearly wants nothing to do with my laptop as it refuses to stand up and be recognized in iTunes or in My Computer....why??!!??    I DID try all of the other obvious troubleshooting items; I tried different USB ports, different cords, different laptops, and even different ipods.....BUT....all is well with everything else BUT for this pain-in-the-@$$ ipod.
    IDEALLY.....since my ipod refuses to make itself available for me to "restore factory settings" via iTunes, the way it SHOULD be handled....., I'm wondering if there are any hackers out here that know of a way to FORCE a MANUAL restoration of factory settings of the ipod, via super-secret "key strokes" on the ipod itself (and not via the iTunes software that is curently useless for this particular ipod)....?
    Thanks in advance to anyone who can help!  Without your assistance, my Classic ipod remains an expensive door stop and/or paper weight.  It's behavior at this point is nothing shy of rude and inconvenient!

    There is no way to restore/reformat the device without connecting it to a PC or Mac.
    Have you checked the iPod's dock connector for signs of bent/damaged/corroded pins that could prevent a full connection with your PC?  If there is any lodged debris, take a can of compressed air to it to blow it all out.
    B-rock

  • How to Restore Factory Settings on a Mac?

    How to Restore Factory Settings on a Mac OS X 10.6.8?
    I have been told you can do this without the Installation CD. I also do not remember the installation CD when i got the laptop. If it's possible then please someone let me know! if not then how can i get a new CD to do this?
    my computer keeps freezing on me at random times, and i have tried taking the laptop to my college tech support and also Best Buy and they said they can't do anything and that i need to try resetting the mac.

    You may not remember the installer disks but they came in the box. Your profile shows you are running 10.6.6 Snow Leopard. To restore back to factory settings you need those disks. That said to go that route may be unnecessry. Stay away from Best Buy tech people. They know nothing. Without the disks you do a repair disk to see if that helps:
    Start up your computer in single-user mode to reach the command line.
    Note: If necessary, perform a forced restart as described in the Emergency Troubleshooting Handbook that came with your computer. On desktop computers, you can do this by pressing the reset/interrupt button (if there is one) or holding down the power button for several seconds. On portable computers, simultaneously press the Command-Control-power keys. If your portable computer doesn't restart with this method, you may need to reset the Power Manager.
    At the command-line prompt type:
    /sbin/fsck -fy
    Press Return. fsck will go through five "phases" and then return information about your disk's use and fragmentation. Once it finishes, it'll display this message if no issue is found:
    ** The volume (name_of_volume) appears to be OKIf fsck found issues and has altered, repaired, or fixed anything, it will display this message:
    ***** FILE SYSTEM WAS MODIFIED *****
    Important: If this message appears, repeat the fsck command you typed in step 2 until fsck tells you that your volume appears to be OK (first-pass repairs may uncover additional issues, so this is a normal thing to do).
    When fsck reports that your volume is OK, type reboot at the prompt and then press Return.
    Your computer should start up normally and allow you to log in.

  • Trying To Restore Factory Settings

    (Apologies for this double post, trying to find my way to the right forum)
    Hi all,
    My iPod has been getting worse over the last month, and now won't play anything.
    I thought it might be time to wipe it clean and restore factory settings. I downloaded updater from here:
    http://www.apple.com/ipod/download/
    Ran the updater. It seems to have erased everything on the iPod, without installing the update. The iPod no longer mounts on desktop. iPod screen seems to be asking me to plug iPod in to wall socket. iPod was fully charged before update procedure.
    I just want to wipe iPod clean of any corruption, install the latest iPod software, and then will reimport tunes.
    I've always charged iPod battery from iMac, don't think we have wall adapter, and don't understand why it is needed now.
    My best guess is I have the iPod with Clickwheel. iPod was a gift from friend, no packaging. Manual does not identify iPod.
    Basically, I seem to have killed my iPod, and will surely be grateful for any advice. Thanks!

    Thanks for your report Ken, maybe we can figure it out if we work together.
    I'm all Mac here, so Vista may not be the issue.
    Do you have the actual wall adapter? I don't have it, and never needed it, but looks like I'll have to try to buy one to get past this.
    Regrettably, the manual is worthless on this issue.
    As best I can figure it, the restore process wiped the ipod clean, but didn't reinstall the needed software. So now the ipod can't talk to the computer?
    Dunno. We need the help of somebody who knows more than us, or knows where to find such help.
    Thanks to anybody who can point us in the right direction!

  • When i plug my iphone into the laptop it now says "cannot read iphone, restore factory settings "

    help! I dont want to lose everything as I know its not all backed up. Tried doing that last week and it got to the end and then said cant back up :-/

    Hack or Jail Break? Whats that?!!  I have had my phone 16months with no other problem except the update i did which made the middle button stop working, although it was resolved (pretty much still sometimes get a prob!) with the next update Apple did.. After that I have been reluctant to plug iphone in, hence not backing up as regularly as I should do.
    The error I get is "Itunes cannot read the iphone, go to the summary tab and restore factory settings.
    Am resigned to that fact i have got to do it now :-(  how do i get any data that was backed up, back on to my phone once i hae restored the settings?
    thanks for replying

  • Hi, I have connected my iPhone 5 to iTunes, backed it up and then started the update but there was a problem, now my phone will not work, it asks to restore factory settings which I have tried 3 times, each time it says the device has an unknown error.

    Hi, I have connected my iPhone 5 to iTunes, backed it up and then started the update but there was a problem, now my phone will not work, it asks to restore factory settings which I have tried 3 times, each time it says the device has an unknown error and the phone switches off.  Please help.

    Same thing happened with my iPhone 4S - no one is any help.  Thanks Apple for such a crappy update!  I've called Apple, they say the SIM card needs replacing, I go to my service provider they tell me nothing wrong with the SIM card - provider tells me I now need a new phone.  Sheesh!  If someone has a solution to this it would be greatly appreciated.

  • How can I restore factory settings in Nokia N73?

    I need help guys, thanks!

    10-Nov-200712:04 AM
    malajac wrote:
    In my case neither code or GREEN-*-3-OFF button doesn't work(!!!
    Is there any other solution to restore factory settings??
    It will work definitly. But turn off the phone first and make sure you push all three buttons tight and turn on the phone. You have to keep them pressed until handshaking logo or pin enter is appear. I have use it so many time since my beloved 6600.
    C6-00 with 8GB MicroSD

  • Can i retrieve a video once i have pressed restore factory settings? My iphone used to back up when i synched it?

    I had a video of my uncle (who passed three days ago) on my old iphone. I used to synch my iphone on my windows computer and it would 'back up'. I 'restored factory settings' when i gave the iphone to my brother when i got a new one. I would really really love to be able to get this video back as it means a lot now my uncle has passed and we no longer have to opportunity to make more. Can anyone help?

    If it is not on PhotoStream and you did not backup, it is gone.

  • How long does restore factory settings take?

    hi,
    I decided to reformat my memory card on my nokia 2730 because it got a virus from a friend's computer...
    then to make sure, i selected restore factory settings --> restore all and entered 12345 as the code since i have not changed my codes ever since i got the phone..
    now the screen says restoring settings. please wait.
    it has been around 30 minutes now and it still has this message on the screen.
    is this normal? how long does restore factory settings take?
    also, it's charging right now..
    so, what should i do?
    thanks in advance for your answers..

    20 seconds
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

Maybe you are looking for

  • Connected to repository but can't view data in CRXI - requests DSN instead

    Post Author: matthewh CA Forum: Integrated Solutions Hi - not sure if this is the right forum but here goes:Trying to get a report designed on my desktop PC with Crystal XI  connecting to my remote server running Crystal Server XI R2 & MySQL 5.  I ha

  • Can Automation be used to send User-defined CC's to Environment objects?

    Hi, this is probably a really dumb question but I'll ask it anyway: I've bought a controller-environment for a synth (Alphajuno2, PG300 programmer) for Logic, the faders in the environment layer use sysex to communicate with the synth. Apparently it

  • Error while opening PDF in mail attachment

    Hi All, In smartform i am sending a mail with attachemnt as PDF file,there is one more option like preview of smartform . issue is like i am able to see the preview of the same record but when it is sent in mail attachement,and while opening PDF its

  • Itunes will no longer play most songs...How do I fix?

    For the past two months or so itunes has increasingly been able to play less of my songs in any of my playlists. Essentially, I will click on the song, and nothing will happen. There does not seem to be any reason for it either. Some are downloaded s

  • How Do You Restart a Failing Load Plan

    If a Load Plan step fails, say because of some bad data or a bad join, I know how to correct the error and restart the failing step or the failing task in the Operator. How do you restart the failing Load Plan or any higher level step in the Operator