Jlaunch processes rapidly increase when a search is requested.

Hi all,
We have questions concerning searches in Enterprise Portal 6.0.  We originally installed EP6.0 and TREX on the same UNIX (Solaris) host.  We recently ran some load tests which indicated our installation was inadequate to support the projected usage.  What we experienced is that performance navigating from role to role, workset to workset and page to page, while not stellar, was acceptable.  We then started including searches in the load mix, the jlaunch processes rapidly climbed, consuming 40 - 50% of the CPUs, throughput went down, and response time went up.  It got so bad that users could not log on and searches would time out or never complete.
So, we installed TREX on a separate host.  Once again during load testing, navigational performance was acceptable until we started loading searches into the mix.  Again, on the portal host, the jlaunch processes went to 40 - 50%.  This time however, searches did not seem to be impacted and completed as one might expect them to.  The TREX host hardly showed any change in processing statistics before, during or after the load test.
It appears to us that the TREX processes are not much of a load on the TREX host, but the actual search requests are an extreme load on the portal host which significantly impact it's performance.  Is this normal and/or expected behavior?    These tests were done with about 25% of our expected load or about 200 - 250 users.

Hi Paul,
I noticed this problem too when running SP15/Oracle and doing searches.
We upgraded to SP17 and the searchs are now much faster.

Similar Messages

  • When I search for videos in google, it takes me to the different website after clicking the search

    I installed FF 4 and I was happy with the look and feel and performance untill oneday I tried to google some vedios.
    When I click on the search results which most of the time suggests to be youtube link, it takes me to altogether different website which I never heard of. I expect when the search result shows me source as youtube, I should be able to go to youtube on clicking on the results.

    1. You need to use Firefox at the Adobe website to get the NPAPI version of Flash for non-IE browsers.
    Download the Flash plugin from the Adobe [http://get.adobe.com/flashplayer/thankyou/ Thank You!] page via:
    '''If it does not start, [http://www.adobe.com/go/fptroubleshoot click here] for troubleshooting information.'''
    On the [http://www.adobe.com/products/flashplayer/support/index.html troubleshooting page] click the link at the bottom:
    If you are still having problems, [http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player_ax.exe click here to download].
    Save it to your Desktop.
    2. Close Firefox using File > Exit
    then check the Task Manager > Processes tab to make sure '''firefox.exe''' is closed,
    3. Then run the Flash setup file from your Desktop.
    * On Vista and Windows 7 you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen).
    See this:
    [http://vistasupport.mvps.org/run_as_administrator.htm]
    You also need to update Java - Firefox 3.6+ version need 1.6.0_10 or higher, for the Next Generation plugin.
    http://www.java.com/en/download/index.jsp

  • Hi. I opened iPhoto and, suddenly, it tells me " WHAT IPHOTO LIBRARY DO I WANT TO USE?" but i had a iPhoto library. When i search on my Pictures, i have the file IPHOTO LIBRARY but it appears on a dim letters and i can not open it.

    Hi. I need some help on the following problem. I opened iPhoto and, suddenly, it tells me " WHAT IPHOTO LIBRARY DO I WANT TO USE?" but i had a iPhoto library. When i search on my Pictures, i have the file IPHOTO LIBRARY but is was not the icon on it i previously remembered and it appears on a dim letters and it can not be opened ... How can i recover it??

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

  • My search media bar brings up the stuff I want when I search for it but won't let me click on the results for anything.

    Hi guys, I've been having troubles with my search bar for searching media in itunes. It worked a while ago but now when I search it brings up results and the results I want but it won't let me click them for anything. I can't go to the song, album or artist or add it to the song queue. It's really annoying to go through my library and search for a specific song without using the search. Please Help!
    Thank You!

    you said you turned your phone off. was it a reboot, or an off? Ive noticed that if the memory is low and you have
    a lot of apps or processes running, it really causes the system lag. Try holding down the top button and home button at the same time. Then wait until it has powered down. In 60 sec or so, restart it the same way. Should fix your issue. There is an app I use called Lite Scan. It allows me to see what is running and it will free up 30mg at a time. Not much granted but enuf to keep the system from going to a crawl.
    as far as your device in itunes goes, open itunes, without your phone connected. look in the advance settings and make sure everything is as it should be. Back up your data and try again. good luck

  • File system getting full // dev_icmmon rapidly increasing

    Hello All,
    /sapmnt/SID/profile file system getting full
    /in this file system dev_icmmon rapidly increasing
    more dev_icmmon
    [Thr 258] **** SigHandler: signal 1 received
    [Thr 01] *** ERROR => IcmReadAuthFile: could not open authfile: icmauth.txt - errno: 2 [icxxsec_mt.c 728]
    [Thr 258] **** SigHandler: signal 1 received
    [Thr 01] *** ERROR => IcmReadAuthFile: could not open authfile: icmauth.txt - errno: 2 [icxxsec_mt.c 728]
    please help me to resolve the issue
    Regards
    Mohsin M

    I have killed icmon process ..now problem is solved

  • Error when performing search:  getExtendedProperties [LDAP: error code 50

    Hi there,
    We are currently running OAS 10.1.2. We have an application which is running Oracle Forms. To get access to these forms, the authenication is a combination of the user logging on to their windows domain, (AD SSO) and having the correct username and groups within Oracle OID and DAS.
    We have a major problem at the moment in Production where every so often a user will get rejected for having insufficient access rights, and the UserID in the logs being Null. Yet if they try again it works.
    Does anyone know why this might be happening for?
    Here is the Forms log :
    09/07/31 06:59:32 Forms session <967> runtime process id = 10,780
    09/07/31 07:02:27 oracle.ldap.util.AccessDeniedException: General Error when performing search: getExtendedProperties [LDAP: er
    ror code 50 - Insufficient Access Rights]
    09/07/31 07:02:27 at oracle.ldap.util.User.getExtendedProperties(User.java:365)
    09/07/31 07:02:27 at oracle.forms.servlet.FormsOIDContext.getUserCredentials(Unknown Source)
    09/07/31 07:02:27 at oracle.forms.servlet.FormsServlet.getUserId(Unknown Source)
    09/07/31 07:02:27 at oracle.forms.servlet.FormsServlet.doRequest(Unknown Source)
    09/07/31 07:02:27 at oracle.forms.servlet.FormsServlet.doGet(Unknown Source)
    09/07/31 07:02:27 at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
    09/07/31 07:02:27 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    09/07/31 07:02:27 at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:824)
    09/07/31 07:02:27 at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
    09/07/31 07:02:27 at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
    09/07/31 07:02:27 at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:224)
    09/07/31 07:02:27 at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:133)
    09/07/31 07:02:27 at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192
    09/07/31 07:02:27 at java.lang.Thread.run(Thread.java:534)
    09/07/31 07:02:27 oracle.ldap.util.AccessDeniedException: General Error when performing search: getExtendedProperties [LDAP: er
    ror code 50 - Insufficient Access Rights]
    09/07/31 07:02:27 In getUserId method: caught oracle.ldap.util.AccessDeniedException: General Error when performing search: ge
    tExtendedProperties [LDAP: error code 50 - Insufficient Access Rights]
    09/07/31 07:02:27 In doRequest method in ue.isNamingException
    09/07/31 07:02:27 Redirecting to DAS to update the resviewer list
    09/07/31 07:02:27 UserID is NULL redirecting to DAS
    09/07/31 07:02:27 Forms Group DNcn=Logical Application Group, orclApplicationCommonName=formsApp_dras03.workcover.qld.gov.au_63A
    36930655911DBBF37F32F8ED7FD07, cn=forms, cn=Products, cn=OracleContext                                                                                                                                                                                         
    09/07/31 07:02:27 The DAS URL generated: http://prinfds.workcover.qld.gov.au:7777/oiddas/ui/oracle/ldap/das/mypage/AppCreateReso
    urceInfo?resKey=prcar_sso&resType=oracleDB&resViewer=cn%3DLogical+Application+Group%2C+orclApplicationCommonName%3DformsApp_dras
    03.workcover.qld.gov.au_63A36930655911DBBF37F32F8ED7FD07%2C+cn%3Dforms%2C+cn%3DProducts%2C+cn%3DOracleContext&doneURL=http%3A%2F
    %2Fdras03.workcover.qld.gov.au%3A7778%2Fforms%2Ffrmservlet%3Fconfig%3Dprcar_sso%26form%3DSY0001.fmx&cancelURL=
    09/07/31 07:05:26 oracle.ldap.util.AccessDeniedException: General Error when performing search: getExtendedProperties [LDAP: er
    ror code 50 - Insufficient Access Rights]
    09/07/31 07:05:26 at oracle.ldap.util.User.getExtendedProperties(User.java:365)
    09/07/31 07:05:26 at oracle.forms.servlet.FormsOIDContext.getUserCredentials(Unknown Source)
    09/07/31 07:05:26 at oracle.forms.servlet.FormsServlet.getUserId(Unknown Source)
    09/07/31 07:05:26 at oracle.forms.servlet.FormsServlet.doRequest(Unknown Source)
    09/07/31 07:05:26 at oracle.forms.servlet.FormsServlet.doGet(Unknown Source)
    09/07/31 07:05:26 at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
    09/07/31 07:05:26 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    09/07/31 07:05:26 at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:824)
    09/07/31 07:05:26 at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
    09/07/31 07:05:26 at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
    09/07/31 07:05:26 at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:224)
    09/07/31 07:05:26 at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:133)
    09/07/31 07:05:26 at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192
    09/07/31 07:05:26 at java.lang.Thread.run(Thread.java:534)
    09/07/31 07:05:26 oracle.ldap.util.AccessDeniedException: General Error when performing search: getExtendedProperties [LDAP: er
    ror code 50 - Insufficient Access Rights]
    09/07/31 07:05:26 In getUserId method: caught oracle.ldap.util.AccessDeniedException: General Error when performing search: ge
    tExtendedProperties [LDAP: error code 50 - Insufficient Access Rights]
    09/07/31 07:05:26 In doRequest method in ue.isNamingException

    I fixed it in my environment.
    formweb.cfg has oid_formsid and formsid_group_dn. Verify if these values are correct.
    Also ensure that formsid_group_dn has no blank spaces after ',' (commas)
    formsid_group_dn=cn=Logical Application Group,orclApplicationCommonName=formsApp_xyzhost_1224C3F0A73B11DBBFC783346A955D8F,cn=forms,cn=Products,cn=OracleContext

  • My MacBook Pro (OSX 10.9.4) reboots automatically when opening images or websites with images that change rapidly or when switching rapidly from an image to another or sometimes on slides on Diaporama.

    My MacBook Pro (OSX 10.9.4) reboots automatically when opening images or websites with images that change rapidly or when switching rapidly from an image to another or sometimes on slides on Diaporama.

    Sun Sep  7 10:31:09 2014
    panic(cpu 2 caller 0xffffff7fa0fa4f7c): "GPU Panic: [<None>] 5 3 7f 0 0 0 0 3 : NVRM[0/1:0:0]: Read Error 0x00610210: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd2000000 0xffffff813ad12000 0x0a5480a2, D0, P3/4\n"@/SourceCache/AppleGraphicsControl/AppleGraphicsControl-3.6.22/src/Apple MuxControl/kext/GPUPanic.cpp:127
    Backtrace (CPU 2), Frame : Return Address
    0xffffff8128feb0b0 : 0xffffff801ec22f79
    0xffffff8128feb130 : 0xffffff7fa0fa4f7c
    0xffffff8128feb200 : 0xffffff7f9f625f1b
    0xffffff8128feb2c0 : 0xffffff7f9f6ef50a
    0xffffff8128feb300 : 0xffffff7f9f8a70e5
    0xffffff8128feb330 : 0xffffff7f9f8a7e10
    0xffffff8128feb370 : 0xffffff7f9f602b10
    0xffffff8128feb490 : 0xffffff7f9f6034ec
    0xffffff8128feb520 : 0xffffff7f9f6008ab
    0xffffff8128feb560 : 0xffffff7f9f60081b
    0xffffff8128feb600 : 0xffffff7f9f62a576
    0xffffff8128feb800 : 0xffffff7f9f62b3f6
    0xffffff8128feb8e0 : 0xffffff7fa05af9c2
    0xffffff8128feb920 : 0xffffff7fa05bf37f
    0xffffff8128feb940 : 0xffffff7fa05ed33b
    0xffffff8128feb980 : 0xffffff7fa05ed39b
    0xffffff8128feb9c0 : 0xffffff7fa05c4e15
    0xffffff8128feba10 : 0xffffff7fa0590b5e
    0xffffff8128febaa0 : 0xffffff7fa058cae7
    0xffffff8128febad0 : 0xffffff7fa058a636
    0xffffff8128febb00 : 0xffffff801f0ce563
    0xffffff8128febb90 : 0xffffff801f0d045f
    0xffffff8128febbf0 : 0xffffff801f0cdf7f
    0xffffff8128febd40 : 0xffffff801ecb6998
    0xffffff8128febe50 : 0xffffff801ec26bc1
    0xffffff8128febe80 : 0xffffff801ec139c5
    0xffffff8128febef0 : 0xffffff801ec1e013
    0xffffff8128febf70 : 0xffffff801ecc9b8d
    0xffffff8128febfb0 : 0xffffff801ecf3f66
          Kernel Extensions in backtrace:
             com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[D61B2BB9-4289-318D-9197-5E1E13B 1FF32]@0xffffff7f9f5d6000->0xffffff7f9f83efff
                dependency: com.apple.iokit.IOPCIFamily(2.9)[4662B11D-2ECA-315D-875C-618C97CDAB2A]@0xffffff 7f9f2be000
                dependency: com.apple.iokit.IONDRVSupport(2.4.1)[D41125CE-69BD-32E7-9B1D-4E83431662DD]@0xff ffff7f9f5c6000
                dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[75D81741-64C1-3941-ADFA-9D6B6C434EE4]@0 xffffff7f9f583000
             com.apple.driver.AppleMuxControl(3.6.22)[32862231-50BC-3AF6-87A2-703321AE4F90]@ 0xffffff7fa0f96000->0xffffff7fa0fa9fff
                dependency: com.apple.driver.AppleGraphicsControl(3.6.22)[AA46D551-BE0F-33DA-93A3-8F46197BB 36F]@0xffffff7fa0f8e000
                dependency: com.apple.iokit.IOACPIFamily(1.4)[045D5D6F-AD1E-36DB-A249-A346E2B48E54]@0xfffff f7f9f52b000
                dependency: com.apple.iokit.IOPCIFamily(2.9)[4662B11D-2ECA-315D-875C-618C97CDAB2A]@0xffffff 7f9f2be000
                dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[75D81741-64C1-3941-ADFA-9D6B6C434EE4]@0 xffffff7f9f583000
                dependency: com.apple.driver.AppleBacklightExpert(1.0.4)[E04639C5-D734-3AB3-A682-FE66694C66 53]@0xffffff7fa0f91000
             com.apple.nvidia.classic.NVDANV50HalTesla(8.2.4)[B0E6AAA7-E970-3D81-8B43-145D56 A3A4AC]@0xffffff7f9f849000->0xffffff7f9faf2fff
                dependency: com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[D61B2BB9-4289-318D-9197-5E1E13B 1FF32]@0xffffff7f9f5d6000
                dependency: com.apple.iokit.IOPCIFamily(2.9)[4662B11D-2ECA-315D-875C-618C97CDAB2A]@0xffffff 7f9f2be000
             com.apple.GeForceTesla(8.2.4)[E0EBC5ED-DC61-3C57-BCCE-0478C0566F4F]@0xffffff7fa 056f000->0xffffff7fa0639fff
                dependency: com.apple.iokit.IOPCIFamily(2.9)[4662B11D-2ECA-315D-875C-618C97CDAB2A]@0xffffff 7f9f2be000
                dependency: com.apple.iokit.IONDRVSupport(2.4.1)[D41125CE-69BD-32E7-9B1D-4E83431662DD]@0xff ffff7f9f5c6000
                dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[75D81741-64C1-3941-ADFA-9D6B6C434EE4]@0 xffffff7f9f583000
                dependency: com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[D61B2BB9-4289-318D-9197-5E1E13B 1FF32]@0xffffff7f9f5d6000
    BSD process name corresponding to current thread: WindowServer
    Mac OS version:
    13E28
    Kernel version:
    Darwin Kernel Version 13.3.0: Tue Jun  3 21:27:35 PDT 2014; root:xnu-2422.110.17~1/RELEASE_X86_64
    Kernel UUID: BBFADD17-672B-35A2-9B7F-E4B12213E4B8
    Kernel slide:     0x000000001ea00000
    Kernel text base: 0xffffff801ec00000
    System model name: MacBookPro6,2 (Mac-F22586C8)
    System uptime in nanoseconds: 510740864359
    last loaded kext at 323988531917: com.apple.filesystems.msdosfs 1.9 (addr 0xffffff7fa10c2000, size 65536)
    last unloaded kext at 409214035879: com.apple.filesystems.msdosfs 1.9 (addr 0xffffff7fa10c2000, size 57344)
    loaded kexts:
    com.apple.driver.AudioAUUC 1.60
    com.apple.driver.AppleHWSensor 1.9.5d0
    com.apple.driver.AppleUSBCDCECMData 4.2.1b5
    com.apple.driver.AGPM 100.14.28
    com.apple.driver.AppleUSBCDC 4.2.1b5
    com.apple.filesystems.autofs 3.0
    com.apple.iokit.IOBluetoothSerialManager 4.2.6f1
    com.apple.driver.AppleMikeyHIDDriver 124
    com.apple.driver.AppleHDA 2.6.3f4
    com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.6f1
    com.apple.driver.AppleSMCPDRC 1.0.0
    com.apple.GeForceTesla 8.2.4
    com.apple.driver.AppleMikeyDriver 2.6.3f4
    com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
    com.apple.driver.AppleLPC 1.7.0
    com.apple.driver.AppleSMCLMU 2.0.4d1
    com.apple.driver.AppleMuxControl 3.6.22
    com.apple.driver.AppleIntelHDGraphics 8.2.4
    com.apple.driver.AppleIntelHDGraphicsFB 8.2.4
    com.apple.driver.AppleUpstreamUserClient 3.5.13
    com.apple.driver.AppleMCCSControl 1.2.5
    com.apple.iokit.IOUserEthernet 1.0.0d1
    com.apple.Dont_Steal_Mac_OS_X 7.0.0
    com.apple.driver.AppleHWAccess 1
    com.apple.driver.SMCMotionSensor 3.0.4d1
    com.apple.driver.AppleUSBTCButtons 240.2
    com.apple.driver.AppleUSBTCKeyboard 240.2
    com.apple.driver.AppleIRController 325.7
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN 1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
    com.apple.BootCache 35
    com.apple.driver.AppleUSBCardReader 3.4.1
    com.apple.iokit.SCSITaskUserClient 3.6.6
    com.apple.driver.XsanFilter 404
    com.apple.iokit.IOAHCIBlockStorage 2.6.0
    com.apple.driver.AppleUSBHub 683.4.0
    com.apple.driver.AppleFWOHCI 5.0.2
    com.apple.driver.AirPort.Brcm4331 700.20.22
    com.apple.iokit.AppleBCM5701Ethernet 3.8.1b2
    com.apple.driver.AppleUSBEHCI 660.4.0
    com.apple.driver.AppleAHCIPort 3.0.5
    com.apple.driver.AppleSmartBatteryManager 161.0.0
    com.apple.driver.AppleACPIButtons 2.0
    com.apple.driver.AppleRTC 2.0
    com.apple.driver.AppleHPET 1.8
    com.apple.driver.AppleSMBIOS 2.1
    com.apple.driver.AppleACPIEC 2.0
    com.apple.driver.AppleAPIC 1.7
    com.apple.driver.AppleIntelCPUPowerManagementClient 217.92.1
    com.apple.nke.applicationfirewall 153
    com.apple.security.quarantine 3
    com.apple.driver.AppleIntelCPUPowerManagement 217.92.1
    com.apple.driver.AppleUSBCDCECMControl 4.2.1b5
    com.apple.AppleGraphicsDeviceControl 3.6.22
    com.apple.kext.triggers 1.0
    com.apple.iokit.IOSerialFamily 10.0.7
    com.apple.driver.DspFuncLib 2.6.3f4
    com.apple.vecLib.kext 1.0.0
    com.apple.iokit.IOAudioFamily 1.9.7fc2
    com.apple.kext.OSvKernDSPLib 1.14
    com.apple.iokit.IOFireWireIP 2.2.6
    com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.6f1
    com.apple.nvidia.classic.NVDANV50HalTesla 8.2.4
    com.apple.driver.AppleSMBusPCI 1.0.12d1
    com.apple.driver.IOPlatformPluginLegacy 1.0.0
    com.apple.driver.IOPlatformPluginFamily 5.7.1d6
    com.apple.driver.AppleHDAController 2.6.3f4
    com.apple.iokit.IOHDAFamily 2.6.3f4
    com.apple.driver.AppleGraphicsControl 3.6.22
    com.apple.driver.AppleBacklightExpert 1.0.4
    com.apple.driver.AppleSMBusController 1.0.12d1
    com.apple.nvidia.classic.NVDAResmanTesla 8.2.4
    com.apple.iokit.IONDRVSupport 2.4.1
    com.apple.iokit.IOSurface 91.1
    com.apple.iokit.IOGraphicsFamily 2.4.1
    com.apple.iokit.IOBluetoothFamily 4.2.6f1
    com.apple.driver.AppleSMC 3.1.8
    com.apple.driver.AppleUSBMultitouch 240.9
    com.apple.iokit.IOUSBHIDDriver 660.4.0
    com.apple.iokit.IOSCSIBlockCommandsDevice 3.6.6
    com.apple.iokit.IOUSBMassStorageClass 3.6.0
    com.apple.driver.AppleUSBMergeNub 650.4.0
    com.apple.driver.AppleUSBComposite 656.4.1
    com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.6
    com.apple.iokit.IOBDStorageFamily 1.7
    com.apple.iokit.IODVDStorageFamily 1.7.1
    com.apple.iokit.IOCDStorageFamily 1.7.1
    com.apple.iokit.IOAHCISerialATAPI 2.6.1
    com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.6
    com.apple.iokit.IOUSBUserClient 660.4.2
    com.apple.iokit.IOFireWireFamily 4.5.5
    com.apple.iokit.IO80211Family 640.36
    com.apple.iokit.IOEthernetAVBController 1.0.3b4
    com.apple.driver.mDNSOffloadUserClient 1.0.1b5
    com.apple.iokit.IONetworkingFamily 3.2
    com.apple.iokit.IOUSBFamily 683.4.0
    com.apple.iokit.IOAHCIFamily 2.6.5
    com.apple.driver.AppleEFINVRAM 2.0
    com.apple.driver.AppleEFIRuntime 2.0
    com.apple.iokit.IOHIDFamily 2.0.0
    com.apple.iokit.IOSMBusFamily 1.1
    com.apple.security.sandbox 278.11.1
    com.apple.kext.AppleMatch 1.0.0d1
    com.apple.security.TMSafetyNet 7
    com.apple.driver.AppleKeyStore 2
    com.apple.driver.DiskImages 371.1
    com.apple.iokit.IOStorageFamily 1.9
    com.apple.iokit.IOReportFamily 23
    com.apple.driver.AppleFDEKeyStore 28.30
    com.apple.driver.AppleACPIPlatform 2.0
    com.apple.iokit.IOPCIFamily 2.9
    com.apple.iokit.IOACPIFamily 1.4
    com.apple.kec.corecrypto 1.0
    com.apple.kec.pthread 1
    System Profile:
    Model: MacBookPro6,2, BootROM MBP61.0057.B0F, 2 processors, Intel Core i7, 2.66 GHz, 8 GB, SMC 1.58f17
    Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
    Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
    Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353237334348302D4346382020
    Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353237334348302D4346382020
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.98.100.22)
    Bluetooth: Version 4.2.6f1 14216, 3 services, 15 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Network Service: TomTom, Ethernet, en3
    Serial ATA Device: Hitachi HTS725050A9A362, 500.11 GB
    Serial ATA Device: MATSHITADVD-R   UJ-898
    USB Device: Hub
    USB Device: TomTom
    USB Device: Built-in iSight
    USB Device: IR Receiver
    USB Device: Hub
    USB Device: Apple Internal Keyboard / Trackpad
    USB Device: Internal Memory Card Reader
    USB Device: BRCM2070 Hub
    USB Device: Bluetooth USB Host Controller
    Thunderbolt Bus:

  • Memory requirement is continiously increased when i am running my application program in an infinite loop,after certain time it shows an error called low virtual memory

    memory requirement is continiously increased when i am running my application program in an infinite loop,after certain time it shows an error called low virtual memory

    What are you doing with your program. Lots of improper programming techniques can cause this - building arrays, concantanating strings, opening but not closing refrences, etc. Need more details or post your VI. Also, have you looked at "LabVIEW Performance and Memory Management"? It's part of the shipping documentation and available from Help>Search the LabVIEW Bookshelf.

  • Process Size Increase

    Hi,
    While stress testing our application we found increase in the process size. When we run our application for 5 hrs+ the size increases by 1MB+. We used the pmap -x , and it shows the increase in the heap.
    We used purify and sun workshop for finding the memory leak . Both of them show no memory leak. They do show increase in the MIU/Live memory. The way we do our test is in continous cycles. We do same set of operations in every cycle. When we started the application it was 30MB and when we did first cycle it increased to 68 MB. The heap increases by 1MB every 5hrs. After 250 cycles it has increased 10MB.
    Any idea why the heap keep on increasing? Is there any way to reclaim the memory?
    Thanks,
    Meena

    Hello,
    It seems that your program has some "memory overuse" problems.
    Memory overuse occurs when the program always allocates some new memory blocks on the heap (new, malloc) but never deletes them. Most of the time, these blocks are not "memory leaks" because the pointers on these blocks still exist, so that a garbage collector does not solve the issue.
    The classical example is a linked list that always grows...
    The only way to solve this, IMHO, is to track the memory in-use before and after processing.
    Using Rational purify, you can call purify_all_inuse() to see all blocks inuse or purify_new_inuse() to see the new allocated blocks. Do this before and after processing, then check what is different.
    Then you will have to understand why these blocks have been allocated, and then correct the problem.
    Good luck,

  • What is the process for EBS when customer directly deposits the payment in

    Hi,
    Please tell me the process for EBS when customer deposits the payment in bank
    1) via Cheque
    2) via Bank Transfer
    Can we clear the open items automatically if yes, then how please tell me how to map it so that it can be cleared when we have EBS?
    Thanks and Regards
    Nitin

    Hi Expert,
    Please select the Standard algorithm - 001 and don't change any settings in EBS, Just follow the below steps:
    Just configure the below steps:
    1. Delete Bank Statement Test Data in T-Code: SE38
    PROGRAM - RFEBKA96
    Execute
    On the Delete Buffer screen, enter the following data:
    Field name     User action and values
    ANWND          0001
    Choose Execute to continue.
    On the Delete Buffer screen, select the bank statement files to be deleted and choose the Delete statements button.
    By this Step the Result is:
    The bank statement previously created is deleted, thus allowing you to re-create the current dayu2019s bank statement.
    2. Create BAI File
    Use this step, you create the bank statement input file.
    Prerequisites: You must delete the existing bank statement file to create a new bank statement.
    Procedure
    Go to T-Code:SE38
    Program - RFEBKAT5     
    Choose  Execute to continue.
    On the General test data for BAI bank statement and create open items screen, enter the necessary data.
    Description                             User action and values                                               Comment
    EOD                                             Select     
    EOD File name                             RECON1     
    Company code                        XXXX     
    House Bank                             ABC     
    House Bank Account            1234XXXXX     
    Posting Offset Account            111000(Provide Offset Account)
    Statement date                    Yesterdayu2019s date     
    Invoice date                            Yesterdayu2019s date     
    Generate items                    Select this field     
    Open items                            2(Provide the Open Items)
    Last w/diff                           Select this field     
    Extrn/Trns                           165     
    Amount                                   1000     
    Customer                                   XYZ(Provide the Customer Account)     
    Increase by                           50     
    Document type                   DR     
    With bank details                   Select this field     
    Debit posting key                   01     
    With ref. data                            Select this field     
    Credit posting key                   50     
    XBLNR                                   Select this field      
    Generate items                   Select this field     
    Debit posting key                   40     
    Document type                   SA     
    Credit posting key                   50     
    Specific                                    Select this button     
    Checks Out                           575 ++++++++07 58.5!                                       Exclamation mark goes in 2nd column
    Funds Out                           495 ++++++++01 1500 200200665757699     
    Funds In                                   398 ++++++++08 150 BANK CHARGE     
    Choose Execute  to continue.
    Result
    The BAI file is displayed.
    3. Execute Bank Statement Reconciliation Program
    T-Code: FF.5
    Field name      Description                                                             User action and values     
                             Import data                                                             Select     
                          Workstation upload                                                  Deselect     
    FEBFORMAT     Elect. bank statement format                                  A     
    FEBAUSZF     Statement file                                                          RECON1     
    FEBFILTER2     XBLNR number interval                                          199900000000000 to 200099999999999     
                         Print bank statement (Output controls tab)          Select     
                         Print posting log(Output controls tab)                  Select     
                         Print statistics(Output controls tab)                          Select     
    Choose Execute  to continue.
    Result:The bank reconciliation program RFEBKA00 uploads the BAI file created in the previous step. As a result, the open items created in the previous step, have been cleared. You can display the journal entries of these postings by using transaction code FB03.
    Regards,
    GK
    SAP

  • Process runs faster when executed independently, but runs slower when a parallel big process is running

    Hi,
    The issue is,  a process, say "A" is running fine on certain days. On some days there are additional processes running on the server. When these additional processes are running, "Process A" suffers performance issue.
    Interesting point is that, these additional processes were running since long time. But, earlier "Process A" was running fine even when these additional process were running. Suddenly from past 2 or 3 weeks there is performance issue in "Process
    A", when these additional process run.
    Note: Nothing has been modified for the process A.
    Process A is an SQL job which has SSIS Package and stored proc in different steps
    When multiple parallel processes are running, SSIS Package step suffers around 40% increase in execution time, where as stored procs have only 15-20% increase in execution time
    When Process A is executed while no other big processes are running, it's execution time is fine. From past few days, issue is only when, some other big parallel processes are running.
    Currently below is my analysis:
    Since Process A is running fine when it is executed independently, I assume there is no issue in this process.
    Since issue occurs when some other big process is running, when Process A is running, I believe it is DiskIO issue. Will the issue be resolved if RAM size is increased?
    Is there any way to check if RAM is being fully utilized by the server
    Is there any other possibility why there is a sudden dip in performance when parallel processes are running.
    Is there any possibility of having issues in additional processes. Incase if it has some issues, does it impact "Process A"
    Please let me know if you need any further information. Infact I am not able to diagnose what is the actual root cause for the performance issue in "Process A" as nothing has been modified.
    Also it would be very much helpful, if I get any idea on different ways in reaching the actual root cause of this performance issue.
    NOTE: This is a data warehouse
    Thanks,
    Raksha

    When a query has a parallel plan, it will in general try to grab all cores up to the maxdop setting, but then it often uses them inefficiently. 
    But in that case, there are better odds for the queries not battling on resources with each other!
    What Josh alludes is to the fact that SQL Server needs to partition the data, so that different partitions are processed on different cores. This partitioning is based on statistics, and the statistics may be out of date or not accurate enough. This may
    result in that the data is not partitioned proportionally, and some threads gets very little data to work with. Thus, these CPUs are still idle, so there may still be room for the two processes to run at full speed. (That is, full speed with the given plan,
    which is not the full speed, had the partitioning been accurate.)
    I mention this because you asked about parallelism, and many systems leave maxdop at its default setting of 0 (which means "go ahead and grab everything!") even though Microsoft recommends you set it to a different number depending on this and
    that.
    Since this is a data warehouse, Raksha should not tamper with "max degrees of parallelism", I think.
    Erland Sommarskog, SQL Server MVP, [email protected]

  • I have an iphone 5, i have stupidly never done a back up! And deleted a contact. When i search the phone text messages still come up from this contact but arent in my message inbox. Is there any way i can retrieve this contact?

    I accidentally deleted a contact but stupidly i haven't ever done a backup. When i search my i phone, text messages  that i received from this deleted contact still appear but they aren't in my message inbox. Is there anyway i can retrieve this contact??
    Thank you!!! 

    With no backup? No. Are you not syncing your contacts either over-the-air or with a supported application on your computer?

  • When i search for a website it takes me to another website.  I will click on the link and it takes me to one ive never wanted?  please help very frustrating!  I am not very computer savy, is it my settings or something?  Jen

    When I search for a website it itakes me to another website.  I will click on a link and it takes me to something completely different or yellow pages etc. Please help I am very frustrated and not very computer savy!  Thanks!  Jen

    Hi Jeff I have uninstalled Muse from my applications and have tried to download the new version but it displays a message 'file not found'. I have included a screenshot.

  • I have just downloaded a free app and there is no icon and it will not open from the list even tho it appears to have downloaded and the "open" button is available.  Does not show up when I search for it.  Plenty of memory . . .

    I Have an iPad mini running iOS 7.1.2,  I downloaded a new app and it's icon does not appear anywhere ( have ~ 180 apps so not at limit) and it won't open from the purchased apps list.  It does not show up when I search for it so can't open t that way either.  It doesn't require iOS 8.  Can't delete and reinstall, cause not icon.  This is not a normal "app won't open" question.  it doesn't start the. Stop it just doesn't seem to exist.  Any help is appreciated

    Hello Chelleuri,
    Thank you for using Apple Support Communities. 
    The following article provides information to trroublehshoot issues with installed apps, including not opening.
    iOS: An app you installed unexpectedly quits, stops responding, or won’t open - Apple Support
    Regards,
    Jeff D. 

  • I can't see an app on my iphone, but when i search i get it. i've made room for the icon to show up on screen, but how do i actually get the icon to appear?

    I can't see an app on my iphone, but when i search i get it. i've made room for the icon to show up on screen, but how do i actually get the icon to appear?

    On your iPad, just go to Settings>Mail, Contacts, etc.>Add account>iCloud and put in the details of the account you set up.  Shouldn't be a problem at all.

Maybe you are looking for