JMAN and UTXJ

Dear All,
can anyone explain me what is the use of condition types JMAN and UTXXJ.While checking CIN configuration i have seen these condition types in pricing procedure.
Thanks.

Hi Sri,
JMAN-is manual condition type to capture Excise value
UTXJ-is condition type which initiates all tax calculation in pricing
Regards,
Preethi

Similar Messages

  • JTX1,JTX2,JTX3,JTX4 and UTXJ

    Hi friends,
    Can anyone tell me whats the use of JTX1,JTX2,JTX3,JTX4 and UTXJ  and how should be the value updated in the Customer and Material master sales views for the respective condition types ?
    Thanks
    Ivy

    Ivy they all are used in CIN
    Here is a really long discription for the same
    CIN determines taxes based on the chapter-id of the material. There are 2 levels for rate determination. First the system will check if there is an exceptional rate available. If this is available then that rate is picked up. This rate could be for a material or material and customer combination. If there are no exceptions then the system looks for chapter-id of that material. The customer will have an excise tax status which along with the plant status will give a final excise status. Based on the excise status and the chapter-id the rates are maintained.
    Can I change the tax rates retrospectively?
    You can change the excise rates with any given validity period. After making the changes you will have to update the sales orders if the new tax rates have to be considered for future deliveries.
    Can I have a different rate for incoming and outgoing transactions for the same material?
    You can maintain exceptional rates for either incoming or outgoing based on the volume of exceptions data.
    What do I do if I have one chapter-id for incoming and another for outgoing and material code is the same?
    Along with exceptional rate maintenance you can maintain the chapter-id which should be used for the outgoing transactions. This chapter-id will be used only for copying on to the document and will not be used for rate determination.
    Can I have some more additional rates?You can maintain multiple excise indicators and based on that you can have additional
    rates.
    What will happen if I have multiple rates with overlapping validity periods for the same chapter-id and tax indicator?
    While picking up the rate for a given transaction system will check for that validity period where the valid from is the maximum but with in the pricing date and based on that pick up the rate applicable.
    How does CIN do the pricing?
    CIN uses R3 condition technique for pricing along with the pricing formulae. Details are available in the CIN knowledge bank. Template pricing procedures are provided for various sales scenarios.
    How many tax codes do I need?
    The number of tax codes will directly depend on how you want to account the sales tax. You can have CST and LST being determined by the same tax code if both can be accrued into the same account. Instead if you need separate account determination then you need separate tax codes. Also based on the tax concessions available you need to decide the various tax rates which need to be mapped.
    How do I open up more than one tax classification?
    CIN comes with default customization to open up the tax classificvation fields. The procedure is as follows. You need to define as many condition types as the number of tax classification fields. Tbe following procedure could be used.
    • SPRO - Sales and distribution -Basic functions-Taxes - Tax
    determination rules For Country 'IN' make entries as follows (This
    is precustomized in client 000 )
    Seq 1 - UTXJ
    Seq 2 - JTX1
    Seq 3 - JTX2
    Seq 4 - JTX3
    In SPRO - Sales and Distribution - Basic functions - Taxes
    Determine tax relevancy of master records
    How do I handle concessional excise?
    This is explained in SAP note 335577. Having opened up the new tax classification
    fields you might have to do the following
    --> Customer taxes maintain the possible values for JTX3 . Each unique value should denote one concession rate. For eg 1 - normal excise duty
    --> Maintain the JTX3 value against the form code in J1IT -Define Form types
    Maintain the customer tax classification in customer master if the customer has got
    excise exemption
    --> Maintain the excise indicator in J1ID for the customer and form code and this indicator gives the final indicator
    --> Forms database is used for determination of whether the form has arrived or not at the time of billing.
    --> The tax classification value gets defaulted from the customer master in the sales order. This can be changed in the header
    billing data if required
    How do I handle sales tax concessions?
    SPRO - Sales and distribution -Basic functions-Taxes - Tax determination rules For Country 'IN' make entries as follows (This is precustomized in client 000 )
    Seq 1 - UTXJ
    Seq 2 - JTX1
    Seq 3 - JTX2
    Seq 4 - JTX3
    -> Taxes - Determine tax relevancy of master records - Customer taxes maintain the possible values for JTX1 and JTX2. Each unique value should denote one concession rate. For eg 1 - 4% . Multiple forms could correspond to a single rate. JTX1 could be used for CST and JTX2 for LST. (UTXJ could be freely used by the customers as earlier )
    -> Maintain the tax classification in customer master as well as
    material master ( Sales org data 2)
    Build access sequences based on these new fields to point to the correct sales tax code You might have to have a new access based on region of delivering plant and region of ship to party
    How does CIN handle Indian VAT?
    VAT is handled separately & not linked to CIN..
    When I create a new tax code the excise lines are grey and I cannot maintain any value. What should I do?
    This is happening because the Excise conditions for sales are statistical in the tax procedure for India. So while creating a new tax code you need to open the tax procedure remove the statistical flag, maintain 100% for all excise conditions. After saving the tax code you need to make the conditions statistical once again.
    When I release the billing document to accounting there is an error that the account key is missing?
    This is happening because one or more lines in the tax procedure has a condition with a value but is not marked statistical. You need to check whether the conditions JMOD, JAED, JSED and JCES are marked statistical in the tax procedure. You cannot rectify the documents which are in error. The correction takes into effect only the future orders.
    When I release to accounting I get a message tax amount greater than tax base?
    This is happening because the tax base for some tax condition is falling less than the tax base amount. R3 does not allow the tax base to fall below the tax amount. You need to check which condition is giving the problem and based on that you can verify the tax procedure from-to settings.
    Do I need to maintain the chapter-ids for each plant or can it be left blank?
    If the same chapter-id is applicable for the material in all the plants then you need not maintain the chapter-ids for all the plants. You can leave the plant blank.
    When I try printing the excise register nothing comes up?
    Check whether you have maintained the opening balance for the item in the corresponding register (Table J_2IACCBAL for register account balances). Next check whether you have maintained the sapscript forms which are used for printing the registers in the CIN configuration. Finally check whether the extraction has been done for the period.
    When I try printing the excise invoice the list line turns red and nothing happens?
    This is becaue you have not maintained the condition record for output determination. You need to maintain the condition record for output determination at the sold to party level. Also for the documents created already you can go into Billing header – output and manually enter the output type j1io and save. Later the excise invoices can be printed.
    When I try to create RG1 issues entry the line turns red and nothing happens?
    This is happening because you are trying to create an issue entry and the stock in the register is not enough to do the issue. So you need to first update RG1 with the receipts and then go into the issues.
    I have extracted the register data once but now I have added more transactions. Can I extract once more?
    You can re-extract the data if you have added more transaction data for the given period.
    I am using another package for printing registers. Can I download the data once again?
    To prevent data inconsistency in the third party application CIN does not allow you to re download the register data once it has already been downloaded.
    What is the issue classification for RG1?
    You need to classify the RG1 entries as to whether they are receipts from manufacture or other receipts, clearances of various types so that they can be reported under the various headings as required by the Excise commissionerate.
    How do I maintain the opening balances for my register for the first time?
    You need load them manually at the initial data upload.
    How do I get the opening balance for every month?
    CIN calculates the opening balance for reporting purposes based on the transaction s extracted in any period.
    Are opening and closing balances of reghister available for me for reporting?
    You must not pick up the opening and closing balances that are calculated by reporting because they might get changed if some one does a re extract. So they need to be recomputed dynamically. They are not stored.
    Can I round the duty at the header level?
    Duty can be rounded off in CIN only at the item level. Due to technical reasons duty round off is not provided at the header level.
    When I create an excise invoice for exports what exchange rate will the system take?
    System picks up the exchange rate which is maintained in the CIN configuration data for the company code.
    With fortnightly utilization why do I need a part2 entry at the time of Excise invoice creation?
    With fortnightly utilization you do not create an entry in the CENVAT or PLA registers. Instead CIN keeps a separate Despatch register and generates continuous serial numbers in this register that can be used for future reconciliation.
    Do I need to have balances in my CENVAT accounts at the time of Excise invoice creation?
    At the time of excise invoice creation the debit is being made into an Excise payable account. So you need not have balances in the CENVAT account. You need to have enough money at the time of fortnightly utilization or you should have made a debit through TR6 into PLA.
    What are the exceptional reports possible?
    You can list all the billing documents for which excise invoice is not created. You can get a list of all excise invoices for which billing document has been cancelled., You can also have a report of all cancelled excise invoice for which the billing document is still open.
    Can I know which are the billing documents for which there is no excise invoice?
    Excise due list gives you all billing documents for which there is no excise invoice.
    Number range skipping happens for excise invoice. What could be the reason?
    CIN number ranges are defined as not buffered. You need to check if this has been changed. If skipping happens never reset the number range.. you must report the problem to SAP support immediately so that they can help you resolve this.
    While doing excise invoice creation I get an error message that system failure during locking. What can I do?
    While creating the excise invoice, at the time of saving system tries to lock the GL account that is getting updated with the new balances. S probably some one else could be changing the GL account data at that point of time. This is a very short phenomena and is meant to keep the data consistency.
    While doing depot sales invoice selection, list of invoices are not getting displayed. Why?
    You need to check the customization settings for LIFOor FIFO and the invoices of which period you have set. Also you need to check the excise group which is being used. System will show you only those excise invoices which belong to the same excise group, plant, storage location and batch.
    How do I handle the a-certificate at depot?
    A certificates come when the goods are removed after paying a provisional duty. When the final price is decided at the time of the order you need to pay the balance of the duty. There is no facility at the moment to calculate the differential duty. You have to make the payment manully using J1IS at the factory. Once this is done you can go back to the depot and capture this extra payment into your RG23D. This is recorded as a new serial no with in the original folio so that the RG23D register value tally. At the time of selection of excise invoice for sale you have the option to pick up the a-certificates for the excise invoice and then the additional duty gets added into the invoice amount. Also this is reflected in the RG23D register.
    Is it possible to add some additional duty on to the depot invoice with out A certificate?
    No you need an A certificate if you have to get an additional duty in RG23D invoice. Alternative is to write customer specific routines which are not supported by CIN.
    How do I handle the returns at depot?
    If there are returns to depot, that can be captured as any other receipt. You can enter the material document no of the return receipt and the data gets copid and you can copy into RG23D.
    How do I handle returns at factory?
    There are no D3 procedures at the moment which is mandated by the excise department. Legally you can take credit for all the receipts and then pay the duty when it goes out after repair or to another customer. You can Excise invoice without PO route to take the credit.
    When I do excise invoice creation, the system issues a message not enough balance. Why?
    This does not happen any more. There was a need felt that we should check the balance s even though we can pay the duty 15 days hence.
    I am not able to save the excise invoice text?
    You need to check the object type for the object id J1IN. this can be done by checking the data of the view J_1IVTTXOB. The editor mode has to be set as ‘Application text with SAVE key ‘.
    How can I include more text ids for the excise invoice?
    You can use the CIN IMG text maintenance option and add more ids with descriptors. For excise invoice creation the object is J1II. For depot receipts the object is J1IG and for depot sales it is J1IJ.
    Where does the excise invoice get the business area from?
    Excise invoice does not allow entry of business area. The business area in the billing document is automatically taken for the excise invoice.
    Where does the excise invoice get the profit center from?
    Excise invoice picks up the profit center from the billing document if it is available there. If it is not available there then it looks at the plant specific material master data and picks up if available.
    What will the system do if I have not received the form at the time of billing?
    The system will first check in the Form type maintenance whether the form is marked as required. This means that the form has to come by the time billing happens. Once you receive the form you need to enter it into the forms data base (J1IU) for the delivery document number. If the form receipt is not maintained then the billing will do a repricing and charge full tax for the particular excise duty.
    How does fortnightly utilization determine the accounts to be posted?
    There is no transaction type for determining the accounts of the fortnightly utilization. The credit account of the transaction type ‘DLFC ‘ is used as the debit account here. For the credit side we pick the debit accounts from the GRPO, EWPO and TR6C transactions. So it is mandatory that whether you use EWPO or not you should have maintained the account determination for all transaction tyes for a given excise group.
    What is transaction type ‘UTLZ’ used for?
    Transaction type UTLZ is used for determining the accounts when a JV is posted with an option of fortnightly payment.
    Can I have my own transaction types?
    Transaction types are used internally by CIN for various pruposes. So you cannot define your wn transaction types. Alternate account assignments can be done using sub transaction types.
    Where does RG1 get the data of packed/loose material ?
    Initially when you upload the balance in RG1 you need to mention the material form. Later the system assumes the same for for the same material code. If you need to dynamically change this then you can make use of the user-exit. A material can be marked either as packed or loose but not both.
    What will batch utilization of modvat do?
    Batch utilization is just an interface that helps you to complete the utilization of a set of documents in one step. This simply triggers individual utilization as a BDC so that the user interaction can be minimized.
    What is the number range used for export excise invoice?
    Export invoices uses the number range object j_1iexcexp where as the local invoices uses the number range j_1iexcloc. Even though customers are free to use the same number series now there is no bar from using separate series.
    Can I create a zero duty excise invoice?
    Zero duty invoices can be created both from sales as wellas using excise invoice other movements based on the business requirement. These invoices do not generate an accounting document.
    Is it possible to cancel an excise invoice with zero duty?
    There is no problem in canceling a zero duty excise invoice.
    Where does the billing document get the account for excise duty payable?
    The account determination rules of R3 billing is used for determining the account for the excise posting line in a billing document. The CIN customization has no role to play here.
    How does the stock transfer get the assessable value from?
    This is got using the condition base value formula. For this to happen you should have maintained the assessable value in CIN master data.
    How do I know whether SD route or mm route is followed for stock transfer?
    You need to check in SPRO – Materials Management – Purchasing – Set up Stock transport order – Assign delivery type/checking. For SD order this will be marked ‘A’
    Based on the route followed how do I create an excise invoice?
    If SD route is followed for stock transfer then you can use J1IIN to create excise invoice. If MM route is used for creating stock transport order then you need to use J1IS for creation of Excise invoice.
    How to configure stock transport order?
    Stock transport order is set up in SPRO- Materials management – Purchasing – Set up stock transport order. Here first you have to define the sales area and the default customer code. You have ato assign the order type to the checking rule. Finally you need to maintain the delivery type for the order type.
    I cannot create a proforma billing document for a replenishment delivery. What has gone wrong?
    Normal R3 setting does not allow a billing document to be created for a delivery type NL. You need to change the customization settings of the item category type NLN so that it becomes relevant for billing.
    When I do a receipt at the depot from my factory how do I give the excise invoice number?
    If the excise invoice already exists in the R3 system then in the detail screen of RG23D receipt you can directly enter the internal document number of the excise invoice. This will automatically allow the entrie challan details to be copied.
    Should I receive the full quantity at depot or transit loss is allowed?
    You can receive some goods in the depot which is less than the dispatched. You have the option to enter the receipt quantity as well as the challan quantity at the time of RG23D receipt.
    I want to calculate the excise duties at the time of export sales. What should I do?
    There is a calculate tax button on the utilization screen of Excise invoice creation.. This option will calculate the taxes for an export invoice.
    Can I use my own layout for printing sales excise invoice?
    Yes. If you are using your own layout then you need ot maintain this in the output determination procedure of billing documents for the output type j1i0.
    Can I use my own layout for printing Excise invoice other movements?
    Excise invoice other movements picks up the report layout from the output type ZEXC which has been maintained against the SD output determination – Sales documents. You can maintain your own layouts here and then they will be used for printing.
    Can I use my own layouts for register printing?
    Yes you can have your own layouts. You need to maintain the same in the CIN customization against the sap script form maintenance.
    Can I change the posting date at the time of fort nightly utilization?
    You can enter the posting date as per which you want the system to do the fortnightly
    posting.
    Should I keep the fi/mm period open at the time of posting fort nightly utilization?
    The current period alone should be open at the time of fortnightly utilization. It is also required that both MM as well as FI periods need to be open.
    When I run fortnightly utilization the system is showing zero balance even though there is some balance in the GL account?
    The balances for utilization are picked up in CIN only when the MM period closing is done for the previous period. For eg. If you r posting date is 5th Dec and the November period is still open system will show zero balance.
    Can I change the document type for the accounting document created at the time of excise invoice creation?
    Document type for excise invoice utilization is defined with in CIN customization at the company code level. You can use your own document type.
    Can I post the fort nightly utilization for individual excise invoices?
    You can post the fortnightly utilization for individual invoices also. System give a message that the CENVAT utilization is already doen. But this is configurable and could be made a warning.
    Can I reverse the fortnightly utilization done?
    No you cannot reverse the posting doen with fortnightly utilization. Simulate option is provided in this option for the user to check whether things are ok so that the chances of error are minimal in the actual run.
    Can I have excise rates more than 100%?
    Yes you can have excise rates higher than 100% since some of the tobacco items carry higher excise rates.
    How do I map the tax classification to form types?
    You can maintain it along with Form type definitions in CIN IMG.
    Can I decide not to generate folio numbers at the time of RG23D creation?
    Yes you can keep the customization option at the Excise group level blank and also you can leave the user-exit open.
    What will happen when I cancel a RG23D selection for sales already made?
    If you are canceling a selection before posting then the RG23D register the record will be removed. But if you have already done the posting then the RG23D record is marked cancelled and the balance in the original invoice is inflated by an equivalent amount.
    Why there is no transaction type for J2IU?
    Transaction type is used for account determination by CIN . This is an internal entity for CIN and has no relevance to the business process. Since there is no account determination need for J2IU there is no transaction type.
    What should be my accounting entry in SD ?
    For Factory Sale
    During Billing Document
    Customer Account Dr.
    Sales Account Cr.
    Cenvat Suspense Account Cr.
    During Excise Invoice Creation
    Cenvat Suspense Account Dr.
    Cenvat payable Cr.
    For TR6C Challan
    PLA Account Dr.
    PLA on hold Account Cr.
    During Fortnightly Utilization
    Cenvat payable Dr.
    Cenvat Account Cr.
    PLA Account Cr.
    For Stock Transfer through SD
    No Accounting entries for Performa Billing Document
    During Excise Invoice Creation
    Cenvat Suspense Account Dr.
    Cenvat payable Cr.
    For TR6C Challan
    PLA Account Dr.
    PLA on hold Account Cr.
    During Fortnightly Utilization
    Cenvat payable Dr.
    Cenvat Account Cr.
    PLA Account Cr.
    1.What is CIN and its Functionality?
    2.What is the current Version on CIN?
    3.What are the Different Pricing Procedure Used in CIN?
    4.CIN is Useful for Which Countries?
    5.What are VAT,Service Tax,Educational Cess Conditions Types used in CIN?
    6.Where would we difine the Tax Code and is it a country Specific?
    7.Where will you difine different Tax Rates like 1 %,4 %,12 % etc?
    8.What are the Different Registers Used In CIN?
    9.What are the Different Indian Transaction Code Related to CIN.
    Regards

  • JTX1 AND UTXJ

    Hi,
    Why this 2 tax categories JTX1 AND UTXJ required to maintain if we are using only one of them in Sales order ?
    Regards,
    Chetan.

    Dear Chetan
    In UTXJ, you are just maintaining the tax code for various combinations like Country/Country etc, whereas in FTXP, you are defining the percentage for each condition type. 
    So while creating sale order, first it will see the combination of UTXJ and then FTXP for value.
    thanks
    G. Lakshmipathi

  • Maintaing Condition record for Tax UTXJ

    ***Hi***
    ***The problem is  that while maintaining  condition record for UTXJ the system gives a message that tax code is not in procedure   TAXINJ.Although the condition record was maintained for that condition type few month before for a different plant.***
    ***The condition table for the condition type are of combination of  country/region/delivering plant region/customer tax classification/material tax classification.***
    ***And UTXJ is for CST for the plant .***
    ***So please tell what else i need to maintain also.***

    Hi,
    You are maintaining condition record for UTXJ and in that mentioning tax code.
    However the tax code you mentioning that is not created in tax procedure TAXINJ and this pocdure is assigned to country IN
    Go to FTXP an create taxcode with combination
    Country Key     -      IN
    Tax Code         -     A0
    Procedure        -     TAXINJ
    Tax Jurisdiction   -   IN01
    kapil

  • Difference Between MWSTand UTXJ

    Plz let me known the difference between MWST and UTXJ, and in ECC 6.0 JTX1, 2,3,4 as a Tax jurisdction code, in case of TAXINN as the Tax Procedure. We are doing Implementation of an Indian Co. at India (MP).
    Which one I am suppose to use in the screen Define tax Determination Rules under SPRO- Sales & Distribution.
    Plz Reply.

    Hi Amit,
    MWST - is a condition type which will be used for Out put tax.
    UTXJ - is a condition type which will be a Basic Price and plays a vitol role in CIN. Especially in TAXINJ.
    as you are aware that
    Basically Cin is divided in to two types:
    1. TAXINJ - Is a Routine Based that is used in the condition types. it will work on the logic what ever is there in the Routine.
    2. TAXINN: - Is a condition Record based. Means we have to create condition records for each and every condition type that you are going to use in the Pricing Procedure.
    Since Version 4.7 this TAXINN came into picture and start using this.
    And Also go through the below.Hope this will help you
    Maintain Excise Duty Indicators
    Use
    In this IMG activity; you maintain the excise duty indicators.
    IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
    Select Tax Calculation Procedure
    Use
    In this IMG activity, you specify which tax procedure you want to use for determining excise duties and sales taxes on input materials in India.
    • If you use condition-based excise determination, use a copy of the tax procedure TAXINN.
    • If you use formula-based excise determination, use a copy of the tax procedure TAXINJ.
    This tax procedure also supports condition-based excise determination, so that you can work with both concurrently.
    We strongly recommend that new customers use condition-based excise determination. Note that once you have started using a tax procedure, you cannot switch to another one, otherwise you will not be able to display old documents.
    Maintain Excise Defaults
    Use
    In this IMG activity, you define which tax procedure and pricing condition types are used in calculating excise taxes using formula-based excise determination.
    Activities
    If you use condition-based excise determination, fill out the CVD cond. field and leave all the others blank.
    If you use formula-based excise determination, fill out all of the fields as follows:
    • Enter the tax procedure and the pricing conditions that are relevant for excise tax processing.
    • Specify the purchasing and sales conditions types used for basic excise duty, additional excise duty, special excise duty, and cess.
    • Specify the conditions in the sales order that are used for excise rates.
    • Specify the countervailing duty condition type used for import purchase orders.
    See also
    SAP Library -> Logistics -> Country Versions -> Asia-Pacific -> India -> Materials Management (MM) -> Condition-Based Excise Determination and -> Formula-Based Excise Determination.
    IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
    Condition-Based Excise Determination
    Use
    When you enter a purchasing document, for example, a purchase order, the R/3 System automatically calculates the applicable excise duties using the condition technique.
    Features
    The standard system comes with two tax calculation procedures. TAXINN is only supports condition-based excise determination, whereas TAXINJ supports condition-based excise determination and formula-based excise determination. Both tax procedures contain condition types that cover all of the excise duties and sales taxes applicable.
    Since the exact rates of excise duty can vary on a large number of factors, such as which vendor you purchase a material from, or which chapter ID the vendor stocks the material under, you create condition records for every sort of excise duty.
    When you come to enter a purchasing document, the system applies the excise duty at the rates you have entered in the condition records.
    Activities
    Customizing
    Make for Logistics – General, by India the settings in Customizing Basic  Excise Duties Usingchoosing Taxes on Goods Movements Account Settings Determination.Condition Technique and …
    These activities include one activity where you define a tax code for condition-based excise determination.
    Master Data
    Create condition records for all excise duties that apply, and enter the tax code for condition-based excise determination in each.
    Day-to-Day Activities
    When you enter a purchase order or other purchasing document, enter the tax code for condition-based excise determination in each line item. The system then calculates the excise duties using the condition records you have created.
    When the ordered materials arrive, you post the goods receipt and the excise invoice. The system posts the excise duty to the appropriate accounts for deductible input taxes when you enter the excise invoice.
    Creating Condition Records for Excise Duty
    1. In the command field, enter FV11 and choose .
    2. Enter the condition type that you want to create a condition record for and choose .
    The Key Combination dialog box appears.
    3. Select the combination of objects that you want to create the condition record for.
    On the dialog box, Control Code means "chapter ID."
    So, for example, to create a condition record for a tax that applies to a combination of country, plant, and chapter ID, select Country/Plant/Control Code.
    4. Choose.
    5. Enter data as required.
    In the Tax Code field, enter the dummy tax code that you have defined.
    6. Save the condition record.
    Formula-Based Excise Determination
    Use
    When you execute a business transaction involving materials that are subject to excise duty, the system automatically calculates the duty for you.
    Prerequisites
    In order for the system to be able to determine which rate of excise duty to apply, you must have maintained all the data on the Excise Rate access from the SAP EasyMaintenance screen, which you can Master Data Access screen by choosing Indirect Taxes Excise Rate Maintenance.
    You maintain the following types of data:
    • Plant master data
    You assign each of your plants an excise duty indicator. You can use the same indicator for all the plants with the same excise status from a legal point of view, such as all those that are in an exempt zone.
    See also the information about manufacturers that are only entitled to deduct a certain portion of the duty (see Partial CENVAT Credit).
    • Vendor master data
    For each of your vendors with the same excise status from a legal perspective, you define an excise duty indicator. You must also specify the vendor type – for example, whether the vendor is a manufacturer, a depot, or a first-stage dealer. You must also stipulate if the vendor qualifies as a small-scale industry.
    For each permutation of plant indicator and vendor indicator, you then create a final excise duty indicator.
    • Customer master data
    similarly, you assign the same excise duty indicator to each of your customers that share the same legal excise status.
    Again, for each permutation of plant indicator and customer indicator, you then create a final excise duty indicator.
    • Material master data
    each material is assigned a chapter ID.
    • Excise tax rate
    For every chapter ID and final excise duty indicator, you maintain the rate of excise duty.
    If your business only qualifies for partial CENVAT credit, you must customize your system accordingly.
    Activities
    Let us consider an example to illustrate how the system determines which rate of excise duty to apply to a material. Assume you are posting a sale of ball bearings to a customer. The system automatically determines the rate of excise duty as follows:
    1. Looks up the customer master data to see what status you have assigned the customer.
    Let's assume you've assigned the customer status 3.
    2. Looks up the plant master data to see what status you have assigned the plant.
    Similarly, your plant has status 2.
    3. The system looks up the table under Excise Indicator for Plant and Customer to see what the final excise duty indictor is for customer status 3 and plant status 2: It is 7.
    4. The system determines the chapter ID of the ball bearing for the plant.
    Let’s assume the chapter ID at plant for the ball bearings is 1000.01.
    5. Finally, the system looks up the table under Excise Tax Rate to see what rate of duty applies to chapter ID 1000.01 under status 7.
    Define Tax Code for Purchasing Documents
    Use: In this IMG activity, you define a tax code for the purposes of calculating excise duty when you enter purchasing documents.
    Only carry out this activity if you use condition-based excise determination.
    Activities: Create a new tax code, and set the tax code type to V (input tax). Do not make any other settings for it.
    Assign Tax Code to Company Codes
    Use
    In this IMG activity, assign the tax code for purchasing documents to the company codes where it will be used.
    Only carry out this activity if you use condition-based excise determination.
    Classify Condition Types
    Use
    In this IMG activity, you specify which condition types you use for which sort of tax. Note that this only applies to condition types that you use with the new excise determination method.
    The system uses this information when you create a document from another one. For example, when you enter an incoming excise invoice from a purchase order, or when you create an outgoing excise invoice from a sales order, the system determines the various excise duties in the excise invoice using the information that you have entered here.
    In addition, when you create a purchasing document, the system only uses the condition types that you enter here.
    • For taxes on purchases, use the condition types contained in the tax procedure.
    • For taxes on sales, use the condition types contained in the pricing procedures.
    Standard settings
    The standard system comes with sample settings for the tax calculation procedures and pricing procedures.
    Use these settings as a basis for your own.
    IMG > Logistics - General > Tax on Goods Movement > India > Account Determination
    Define G/L Accounts for Taxes
    Use
    In this IMG activity, you specify which G/L accounts you will use to record which taxes.
    Requirements
    you have set up G/L accounts for each of the processing keys listed below.
    Activities
    Assign an account to each of the following posting keys. The accounts for VS1, VS2, and VS3 are used as clearing accounts during excise invoice verification.
    • VS1 (basic excise duty)
    • VS2 (additional excise duty)
    • VS3 (special excise duty)
    • VS5 (sales tax setoff)
    • MWS (central sales tax)
    • MW3 (local sales tax)
    • ESA (service tax)
    • ESE (service tax expense)
    Specify Excise Accounts per Excise Transaction
    Use
    In this IMG activity, you specify which excise accounts (for excise duty and CENVAT) are to be posted to for the various transaction types. Enter all the accounts that are affected by each transaction type.
    If you use sub transaction types, enter the accounts for each sub transaction type as well.
    Activities
    Transaction type UTLZ is used for determining accounts only while posting excise JVs and also if the payment of excise duty has to be done fortnightly.
    The fortnightly CENVAT payment utility picks up the credit side accounts from the transaction types of GRPO, EWPO, and TR6C for determining the CENVAT and PLA accounts. There is no separate transaction type for fortnightly payment.
    Example
    Excise TT DC ind Account name
    GRPO CR CENVAT clearing account
    GRPO CR RG 23 BED account
    GRPO DR CENVAT on hld account
    Specify G/L Accounts per Excise Transaction
    Use
    In this IMG activity, you assign the excise and CENVAT accounts to G/L accounts.
    When you come to execute the various transactions, the system determines which G/L accounts to post to by looking at the:
    • Excise group
    • Company code
    • Chart of accounts
    Furthermore, if you want separate account determination settings within an excise group, you can also use sub transaction types.
    Requirements
    You have already:
    • Defined the G/L accounts
    • Defined the excise groups
    • Maintained the transaction accounts
    Activities
    For each excise group, assign the excise and CENVAT accounts to G/L accounts. For most businesses, one set of accounts will suffice for all transactions.
    Note
    You need not remit the CENVAT to the excise department immediately, so maintain the credit account for transaction type DLFC as an excise duty interim account. This will be set off when you remit the duty.
    Config setting needed to be done in order to get the Excise Details Screen in Material Master.
    Even though this functionality is available in enterprise version, a small config step has to be made in Screen Sequences for Material Master.
    Following document helps you to do this configuration.
     1. Go to IMG Define Structure of Logistics General Material Master  Configuring the Material master Screen Sequence.Data Screen for each
    2. Select your screen sequence. Usually it would be 21. Select the same and click on Data Screen in the left frame.
    3. Once the data screens are exhibited, select data screen no. 15, ie. SSq. 21and Scrn 15, which is “Foreign Trade: Import Data”. Select the same and click on Subscreens in the left frame.
    4. Go to the last sub screen i.e. 21-15-6 - SAPLMGD1- 0001 and select the same. Click on tab view subscreen and ensure that the subscreen is blank.
    5. Now in the last sub screen i.e. no.6 you delete SAPLMGD1 – 0001 and instead add SAPLJ1I_MATERIAL_MASTER and in the screen no. 2205.
    6. Save the setting.
    7. Create a Material Master and check whether in Screen Foreign Trade – Import, Excise related subscreen appears.
    Please Reward If Really Helpful,
    Thanks and Regards,
    Sateesh.Kandula

  • TAX Calculation in SD

    Dear SAP Gurus,
    In the Tax calculation procedure TAXINJ
    we maintain the Condition Types (JES4 Say!)
    We then define the TAX Codes with the calcutaion
    Tax Condtion type has Access MWST ( Country /Tax Code)
    Now in the SD We define the same condtion type with Access JDUM and UTXJ with same access(JDUM).
    I want to Know how thw system captures the taxes in the SD pricing when we are not defining any records......if it is taking from FI account ,
    Can anyone explain me how it captures the same in depth..
    Thanks in advance
    regards,
    Amlan Sarkar

    Thanks for your inputs.
    The Pricing procedure analysis as follows.
    Basic price
    Discounts
    TAX
    -->UTXJ   ( Access JDUM=ININPlantTAX Calls CustoTax Cllasi Material)
    Condition record : 100%.
    -->JSE4 (Access JDUM  KEY : Sales org/Destination Country)) Condition record had been found: 12%
    -->JES4 (Access JDUM KEY :Sales Or/Destination Count)
    Condition record has been found :1 %
    -->JES(Access JDUM KEY :Sales Or/Destination Count)
    Condition record has been found :2 %
    All the Three Conditon types has same access as UTXJ !
    Internally form where is the taxes getting captures.
    reagrds,
    Amlan

  • Sales view / Tax classification upload in material master - LSMW

    Hi All,
    While Creating in  LSMW using RMDATIND Batch input method for material mater creation . I am getting an error of "you have not fully maintained tax classification" (M172 error message).
    LSMW details are as follows:
    Project, sub-proj, object : SCIMM,SCIMM,SCI_MM_CREATE
    Please suggest the field value mapping section of LSMW and suggest me how to fix the problem.
    When I create masters manually, in sales view/tax classification 4 tax categories (3 for CA CTX1,CTX2,CTX3 and one for US UTXJ) are getting populated automatically and I need to key-in only 0 or 1 for tax values (ex material :KCC9800MEKIT for sales org 2000, dc 70, dv 70).
    Please sugget me how to fix this issue.
    thanks
    PRadeep

    Hi Murugesh,
    Thanks for your response on this query. I read the link contents.
    LSMW TAX classification for materials
    In the above thread, you have specified
    1. If you have a separate file for tax codes to be applied for different materials then you need to map the records of this file to BMMH2 ( multiple records for a material possible for different countries). Then you need to map BGR00, BMM00 & BMMH1 with another header file with one record for material for the corresponding records on file which correcponds to BMMH2.
    I require your help to implement the above step. As mentioned by you, I have 3 tax codes for CA and one for US (2 diff countries) for each material to be maintained in Tax classification.
    I have created a main source structure  SS which has fields for all views (basic view, sales view, purchasing, plant/sloc and warehouse). I have created a substructure SSTAX for main source structure SS for Tax fields (Aland, taxty,taxm1) and assigned to BMMH2. Will this work or we need to create two  source structure (at same level) for this requirement.
    I am bit confused on how to link these two input files.  I created one record for material xyz in header file and 4 records in tax file (4 tax categories ctx1,ctx2,ctx3 and utxj). How to create one to one relationship working between header and tax file. How the tax file structure will be for 10 material records?
    LSMW Direct Input Method RMDATIND tax classification material
    In the above thread, I find difficulty to follow your steps for same tax data applicable for all materials.
    1.enable the
    Extras->DisplayVariant
    In LSMW transaction, I find diffculty to locate the above option.
    from the menu of the LSMW & check all the check boxes. Now you see the
    __END_OF_RECORD__
    for the structure
    BMMH2which has to be mapped with the input structure in the Maintain structure relations step.
    double click on the __END_OF_RECORD__
    Again I find difficulty to follow the above step. Please explain me step by step to reach below abap editor step.
    which will lead to ABAP editor & then put the following code:
    Canada
    bmmh2-stype = '3'.
    bmmh2-aland = 'CA'.
    bmmh2-taty1 = 'CTX1'.
    bmmh2-taxm1 = '1'.
    transfer_record.
    bmmh2-stype = '3'.
    bmmh2-aland = 'CA'.
    bmmh2-taty1 = 'CTX2'.
    bmmh2-taxm1 = '1'.
    transfer_record.
    Thank you very much for your help and time. I am sure this will be helpful for Pradeep as well.
    Thanks and regrads
    Varadharajan

  • Export Sales Underbound pricing procedure

    Dear All,
    For export Sales underbound in pricing porcedure what type of conditions using for Excise duty, can any body plz explain the Export Sales underbound pricing procedure.
    Thanks and regards
    Chandra

    Hi
      If you are using TAXINJ procedure then you can have PR00 and UTXJ condtion type in pricing procedure and system will redetermine the excise duty while clicking on calculate button in J1IIN under
    utilization screen.
    For TAXINN you can have all the excise condition types maintained as statistical.
    Best Regards
    MBS

  • Maintain tax condition records

    Hi,
    Right now we have option with combination of Plant/ Material group/ Vendor through T.code FV11. Can I add Short text as additional to this combination? if yes how?
    Regards,
    Sattuj

    If JIN1,JIN2 have access sequence MWST assigned, then why cant we maintain tax condition records for JIN1,JIN2?
    Ans: U can maintain Cond. Records in FV11 for JIN1 & JIN2 as they are PurChasing A/c recvables Cond. TYpes.
    2) What is the functionality of UTXJ ?
    Ans: It's a Tax Classification category and  it is also a cond. type for whcih v can maintain the conditin record.
    Its amt is the base on which the Sales Taxes r calculated.
    3)What is the link between Vat Condition types (Eg: JIN1,JIN2) and UTXJ (Which also holds the Tax code in condition record maintainance)?
    Ans: Thers no link between Jin1 & Jin2 and UTXJ as all three r sepately calculated on the NET Price including Discount.
    Hope this helps
    Rgds

  • What is the relation between UTXJ and JMOD, how JMOD determine in order

    Hi All,
    What is the relation between UTXJ and JMOD! 
    How JMOD determine in order! ( For TAXINJ).
    Please help me
    Regards
    raj

    Dear Raj
    Both are not related in anyway.  UTXJ is for sales tax and JMOD is for excise condition.  For UTXJ, you need to create a tax code in FTXP and assign it in VK11 / UTXJ, whereas, JMOD is an excise condition type for which, you need to maintain the relevant datas in J1ID.
    Coming to your question, how JMOD is determined in sale order, it is based on delivering plant.  This delivering plant, as already said above, you will have to maintain in J1ID with the indicator "1" under declared tab in Material Chapter ID combination.
    thanks
    G. Lakshmipathi

  • From Reference Step and To Reference Step

    When you use the fields : From Reference Step and To Reference Step in the pricing procedure how can I now in which cases the conditions will be added or multiplied so that I can avoid using subrutines ?
    For example:
    step 100---Z001   100
    step 101---Z002   2
    Z003 (VK11 maintaned with percentage 2.5% ) from = 100 to = 101
    result Z003 = (100 + 2 ) * 2.5
    Kind Regards.

    Hi David,
    Which conditions to be added comes from the business requirement. with the help of 'from-to' step i think you cant multiply the condition types.
    how can I now in which cases the conditions will be added .
    Suppose:
    100     0     PR00     Price
    200     0     JMAN     Manual Excise     100     190
    300     0     UTXJ     Tax Jurisdict.Code     100     190
    350     0     JMOD     A/R Basic Excise     200
    375     0          Base Prices     100     190
    400     0     JEX2     A/R Basic Excise     350
    450     0     JAED     A/R Add. Excise duty     100     190
    475     0          Base prices + BED     375     400
    500     0     JEXA     A/R AED     450
    520     0     JSED     A/R Special Exc.duty     100     190
    525     0          Base Price + BED + AED     475     500
    540     0     JEXS     A/R sED     520
    550     0     JCES     A/R Cess     100     190
    575     0          Base Price BEDAED+SED     525     540
    If you analyse the example, for calculating JMAN/UTXJ 100-190, all the prices/discounts would be added up.The base prices/discounts and excise duties are all added up to calculate sales taxes such as CST?VAT.
    regards
    prasad

  • Rajesh/Sadhu= Pricing Proc. Difference between Factory and Depot Sales ?

    Hi,
      What is the diff. between the Pricing Proc of Factory and Depot Sales ?
      CIN Version.
    Regrds,
    Binayak
    Message was edited by:
            Binayak Ghosh

    Hi,
    We was into the depot sales project.We have done till excise duty.
    That means,first we are created a sales order and then outbound delivery for that.So based on the outbound delivery number normally we do billing.
    But here after outbound delivery we are in to assigning excise duty tothe delivery.In j1ij we have given and done all the things its working fine by FIFO method.It will first show the first procurement.We will select and this process got over.RG23D table is filled up with the values.
    But after this i gone for doing billing in VF01.But when i give the delivery number,it shows the condition typea and values but it didnt show any thing about excise duty which we are giving,So can anyone plz help me in this issue.
    Whether any configuration we want to do,or any thing we want to do internally.
    Routine 356, which transfer this from j1ij to billing is not happening, Since it is direct procurement of traded items , excise duties need to be passed on to customer directly, Here I hope there is no point of calcualting the excise duty, Since the excise duty would have inventorised.
    UTXJ condition record are maintained.

  • Excise and cess

    gys
    please help me with this .....
    like im doing a factory sale 4.7 using taxinn
    configured settings for cin....
    va01,vl01n.vl02,vf01,j1iin.
    i am able to see the excise duty BED against jexp ( % BED ) in order and billing document
    but in excise invoice im not able to see the bed .......its 0
    let me knw hwere i went wrong im pravctsing this in ides syst in 000 client..
    i have the settings for which were earlier posted in this thread but pleazse let me knw how to solve this,.
    thanks & regards.

    Hi Kiran
    Check UTXJ and also see whether Excise Group and Series Group of the respective plant is assigned.  Most probably, you would not have assigned Excise Group and Series Group to plant.
    Reward me if this helps you.
    Regards
    G. Lakshmipathi

  • Excise and ***. Valsue doen not show when Creating a Sales Order

    Hi SAP Gurus,
    I am creating a Return Sales order through VA01 with reference of Billing Document which was earlier giving error  of 'Copying from sales document type ZSFG to ZREV is not supported' that was resolved by going through the available threads support. I have done it through VTAF.
    Now system copying the records and showing the material and qty but when we doube click an item and then go in Condition tab it is not showing Assesable Value, Excise amount and CST where as it was showing Freight Amount.
    Please advise what wrong we are doing.
    Rajesh Gupta

    Check the pricing analysis in condtions tab what it says ?
    If only taxes are not copied then check the UTXJ Condition records , if it exits then go to VK12 check the validity periods of the same.
    Hope it helps u
    Regards,
    Ramesh

  • Tax Conditions for Sales and Distribution using Jurisdiction Code in Canada

    Hello everyone,
    I would like to share with you a doubt relating taxes for Sales and Distribution in Canada.
    The Tax conditions for Sales and Distribution in Canada are the CTX1 (GST - Canada), CTX2 (PST - Canada) and CTX3 (Base + GST). These are the Tax Conditions which appear when creating a Material or a Client for the Canada Region, and are also the ones included in the Canada Standandard Pricing Procedure.
    I tried to apply the standard method of creating a Master Record for these conditions, but an error relating the Jurisdiction Code came out while releasing to accounting.
    Does anyone one how to procceed? Which are the important issues with Finance Accounting to take in to account?
    I would really appreciate any comment relating this issue.
    Thank you very much in advanced.
    Víctor

    Dear Mr. Lakshmipathi,
    In first place, thank you very much for your quick response.
    I have tried many different procedures to get the aim, and among others, a new access sequence was created to allow the introduction of the Jurisdiction Code (UTXJ is not available for Sales Conditions) but once the Condition is created, it is not recognized when creating the Order ("pricing error: Mandatory condition CTX is missing"). Maybe it has something to do with the fact that these conditions are not included in the Finance Accounting Tax Procedure, where the conditions, which represent the same taxes but with different condition names, are defined for a certain Tax Code and Jurisdiction code.
    Among the different SAP notes for the error relating the Jurisdiction code, there was one proposing to change the Condition Category from "D" (Taxes) to a value between "1 and 4". By doing this a new error appears while creating the order, saying that there are conditions in the Tax procedure (JRC1, JRC2)which are not included in the Sales Pricing procedure. By including this conditions in the Pricing procedure, the Tax Conditions existing in the Finance Accounting Tax Procedure are brought to the Order Conditions, in addition to the Sales Tax Conditions. And there is something more, each Tax Condition from the Finance Accounting Procedure appears twice, one with the application V (Sales) with value zero, and one with application TX (Taxes) with the value existing in the Finance Accounting Taxes Procedure. This is how at the end, the corresponding %value of the taxes is brought to the Invoice with the correct Tax Code, and the proper Jurisdiction Code, which is different for each condition.
    Thank you very much for your time.
    Víctor Liedo

Maybe you are looking for