Jmeter testing (schema failure at early hours)
two node rac
windows 10.2.0.4
my question schema is failing at early 1 am which is shown below
i just want to know what is the reason?
is it - The daily reports kick off at 01:00?
- Data loading (strange this would cause a problem at the same time!)
- Load balancer?
please suggest why it is happening only for 10 minutes
kindly please suggest me ,thanks for your help
details-
This problem still appears to be happening every now and again in site confidence.
What’s really interesting/worrying is that for a number of occasions the error has occurred at exactly 01:09:45 (for example on the following days):
Date Time Server IP Result Code
20/06/2011 01:09:45 85.133.71.112 45: Data Start Threshold Exceeded
24/06/2011 01:09:45 217.156.138.226 45: Data Start Threshold Exceeded
26/06/2011 01:09:45 217.156.138.227 45: Data Start Threshold Exceeded
28/06/2011 01:09:45 79.141.40.101 45: Data Start Threshold Exceeded
29/06/2011 01:09:45 85.133.71.111 45: Data Start Threshold Exceeded
01/07/2011 01:09:45 217.156.138.227 45: Data Start Threshold Exceeded
06/07/2011 01:09:45 85.133.71.114 45: Data Start Threshold Exceeded
There must be something going on at this time to cause the small blips
user1175505 wrote:
two node rac
windows 10.2.0.4
my question schema is failing at early 1 am which is shown below
i just want to know what is the reason?
is it - The daily reports kick off at 01:00?
- Data loading (strange this would cause a problem at the same time!)
- Load balancer?
please suggest why it is happening only for 10 minutes
kindly please suggest me ,thanks for your help
details-
This problem still appears to be happening every now and again in site confidence.
What’s really interesting/worrying is that for a number of occasions the error has occurred at exactly 01:09:45 (for example on the following days):
Date Time Server IP Result Code
20/06/2011 01:09:45 85.133.71.112 45: Data Start Threshold Exceeded
24/06/2011 01:09:45 217.156.138.226 45: Data Start Threshold Exceeded
26/06/2011 01:09:45 217.156.138.227 45: Data Start Threshold Exceeded
28/06/2011 01:09:45 79.141.40.101 45: Data Start Threshold Exceeded
29/06/2011 01:09:45 85.133.71.111 45: Data Start Threshold Exceeded
01/07/2011 01:09:45 217.156.138.227 45: Data Start Threshold Exceeded
06/07/2011 01:09:45 85.133.71.114 45: Data Start Threshold Exceeded
There must be something going on at this time to cause the small blipsUnfortunately we don't know we don't know anything about the processes you mention and don't describe. I presume that the "error" you mention is the 'threshold exceeded' message shown above, but we have no clue as to what that report is, how it was generated, what it is reporting . . ..
At this point the only useful information you've given is that you are running 10.2.0.4.
Similar Messages
-
Import of mappings in a test scheme
hi,
I have a problem importing mappings with owb 10 release 1 and I did not find an answer by now:
I developed all mappings in a scheme and know I want to test the hole DWH application on a test scheme (on the same server). is it correct that the import via mdl only runs for the same scheme?
I built a new runtime, rep and run rep user and I created the test scheme with them. then I tried to compile the packages of the mappings, but this did run without errors (ORA-01924).
So I think I am totally wrong ... Could you tell me, who to transfer the mappings from one scheme into another?
best regards,
KlausHi
Create a test runtime and target and deploy to this environment from the origin design rep with a new runtime connection.
Karesz -
How to synchronize test schema objects with the prod schema objects.
Hi,
I have a requirement of synchronizing test schema objects with the production schema objects. Please let me know the below
1. if there is a standardized method for such activity,
2. if there are oracle utilities for this task.
3. If i had to do this job manually, can you let me know the check list if any.
Thanks
Purushotham Mhttp://www.oracle.com/technetwork/issue-archive/2012/12-sep/o52sqldev-1735911.html
You could try database diff tool in sql developer(but there are some licence restrictions).
I don't know your database version, you could try DBMS_COMPARISON package also.
Look at this link http://docs.oracle.com/cd/B28359_01/appdev.111/b28419/d_comparison.htm
Other solution is to create db link between test and production database, and then you can try different types of queries like
select table_name from user_tables
minus
select table_name from user_tables@db_link_to_other_database
And you can do this for columns, indexes and so on.
But you must have proper DDL scripts for this, to generate sync script.
Also there is a question about work process, you are doing sync in reverse order(from production to test). Test db is for test, after test you go to production db with proper ddl and dml scripts, so these schemas shouldn't be different in the first place(talking about schema, not data here). -
Revision: 21014
Revision: 21014
Author: [email protected]
Date: 2011-04-04 13:44:59 -0700 (Mon, 04 Apr 2011)
Log Message:
bug fix for RTMP security test case failure for Tomcat 7,
defer the ValveBase.getContainer() call to run time.
Checkin tests not run as it only applies to Tomcat 7
Modified Paths:
blazeds/trunk/modules/opt/src/tomcat/flex/messaging/security/Tomcat7Valve.javaRevision: 21014
Revision: 21014
Author: [email protected]
Date: 2011-04-04 13:44:59 -0700 (Mon, 04 Apr 2011)
Log Message:
bug fix for RTMP security test case failure for Tomcat 7,
defer the ValveBase.getContainer() call to run time.
Checkin tests not run as it only applies to Tomcat 7
Modified Paths:
blazeds/trunk/modules/opt/src/tomcat/flex/messaging/security/Tomcat7Valve.java -
Portal configuration: when CIM test getting failure
Hi everybody,
here i got problem while importing files cr_content .zip .
iam getting failure.
And also in performing CIM TEST in visual j2ee admintool.
the test is failure.
Intial time my sytem works properly after few days i got error like this .
how to solve these problem.
give guidence, otherwise refer manuals .
with
jagadeeshHi Jagadeesh,
At the first step, check whether that you can logon to the SLD by using the user that you are using for CIM connection on J2EE visual admin.
At the second step, be sure that you are importing correct version of "CR Content".
Best regards,
Orkun Gedik -
How to handle refreshing TEST schema with PRODUCTION schema ?
- we have database 10g ( standard edition), database name : ABC
- Schema name: ABC.PRODUCTION (which is our production schema)
- Schema name: ABC.TEST (which is our testing schema, where developers work)
Both the production & Test schemas exist in the same database.
Now once a week I wanted to refresh TEST schema with PRODUCTION data
Here is what I have been doing all these years:
=> Take a logical backup (EXPDP) of PRODUCTION schema (prod.dmp)
=> Drop user TEST cascade ( i don't need a backup of this TEST schema)
=> Create user TEST
=> Import PROD.DMP data into TEST schema
All the above 4 steps are being done manually.
Questions:
======
1. Is there any easier way of doing the above steps using some tool ?
2. Does Oracle enterprise manager which comes free with database installation (http://localhost:118/em)
has any utility or tool to do this job ?
3. I want everything to be refreshed (all database objects including data) ?
Thanks
John P
Edited by: johnpau2013 on Feb 23, 2011 4:32 AMThis is crazy. One inadvertent typo and you'll overwrite your Production schema. Plus, what happens if a developer 'tests' against the test schema and slows the Production database to a crawl.
I presume you know all about this, though and can't make the case to management. I hope it's not a business-critical Production database!
Anyway, your method is decent. I would advise against doing it automatically, to be honest, especially when your system is so precariously set up. But if you exist, you could use encapsulate all the steps into a script and use crontab to automate the process. I, personally, wouldn't use DBMS_SCHEDULER as you have to be careful with priorities and workload sometimes (at least in my experience) and you might end up having your export/import clash with other jobs in the system if you don't pay attention.
Here are the steps I would use:
Create a 'create user' script for the test schema based on dynamic SQL. That way you can be sure you have all the grants necessary for the user, in case things change.
Drop the test user (use EXTRA caution and be defensive when coding this part!)
Export the schema using FLASHBACK_SCN to ensure you have a consistent export
Run your 'create user' script to create the test user
Import the schema with a REMAP_SCHEMA option (use EXTREME caution with this!!!!)
Compile invalid objects
Compare objects and exclude any recycle_bin objects. Send an email alert if the object counts are different.
Compare invalid objects. Any objects which aren't invalid in Production should be flagged up if they're invalid in test.
Again, it's absolute insanity to have a test schema in a Production database. You absolutely must insist on addressing that with management.
Mark -
JRE / JWS failure after several hours
I encountered a strange problem when trying to login to a SquirrelMail application that only occured with three out of seven browsers I use for testing. After making sure that all cookie and security settings were the same in all browsers, I happened to notice that in the failing three, there were some error messages shown in the Javascript console.
So I thought it would be a good time to make sure my JRE was up to date. I installed the latest level, but that didn't help. Then Inoticed the Java Web Start package (but didn't notice that it was supposed to be part of the JRE). I downloaded and installed that, and the three browsers started handling the login properly.
However, after several hours all three started failing again.
I repeated the JWS installation, and they worked...for a few more hours.
I repeated this cycle several times, and it was always the same: the login page was processed normally for several hours only after a reinstallation of the JWS package.
The browsers that are failing are: IE, Opera and Firefox. The ones that are not affected by this are NetScape, K-Meleon and Slim Browser.but i kept on having download failure.
May be your internet connection ...
OS X Recovery requies a high speed broandband connection via Wi-Fi or Ethernet as noted here > OS X: About OS X Recovery
If it's convenient, you can sign up for Apple workshops > Apple - One to One -
We have created a stage schema and tested application which is working fine when we are moving it to another schema for further testing ( This schema is created using same scripts which were used to create objects in staging schema) the performanc of application (Developed in .NET) slows down drastically
Some of the store procedures we have checked at Databse/SQLdeveloper level are giving almost same performance but at Application level there is lot of difference
Can you please help
We are using Oracke 11g DatabaseAre you using the Database Cloud Service? You cannot create schemas in the Database Cloud Service, which makes me think you are not. This forum is only for the Database Cloud Service.
- Rick Greenwald -
Test-pstnoutboundcall failure 500, The server encountered an unexpected internal error
Hi,
We have a Lync 2013 pool, Front end colocated with Mediation server.
have trunk configured to CUCM. I'm able to receive PSTN calls, however cannot dial PSTN number.
While using test-CsPstnOutboundCall receive the following SRV record error.
Target Fqdn : lync2013pool.domain.com
Result : Failure
Latency : 00:00:00
Error Message : 500, The server encountered an unexpected internal error
Diagnosis : ErrorCode=1008,Source=sip.domain.com,Reason=Unable to resolve
DNS SRV record,domain=p
Microsoft.Rtc.Signaling.DiagnosticHeader
i can confirm that we have SRV record for _sipinternaltls._tcp.sipdomain.comHi AlinIliescu,
You can run the command with the Verbose parameter to get the detailed activity.
Please make sure you use an existed Lync account to test.
Make sure this user is Enterprise Voice enabled and assigned the related voice policy.
Best Regards,
Lisa Zheng
Lisa Zheng
TechNet Community Support -
Exchange 2010 SP3 - Test-OutlookConnectivity Failures
Test-OutlookConnectivity -Protocol TCP gives success on all tests. If I run Test-OutlookConnectivity -Protocol HTTP, I get failures on all . I'm trying to figure out why. We have a single CAS array in our main site with two servers.
We have a third server in our COLO location and there is no CAS for that site. Outlook Anywhere is not enabled.
If I run "Test-OutlookConnectivity -Protocol HTTP" at the main site, I get this error message:
Fatal Autodiscover failure EXPR = <Null>.
+ CategoryInfo : OperationStopped: (Microsoft.Excha...onnectivityTask:TestOutlookConnectivityTask) [Test-
OutlookConnectivity], FatalAutodiscoverException
+ FullyQualifiedErrorId : F70A1ED2,Microsoft.Exchange.Monitoring.TestOutlookConnectivityTask
+ PSComputerName : ex1.domain.local
I get different messages altogether when I run tests from the COLO site. For both protocols I get the message:
An error occurred while trying to access mailbox EX2.domain.local, on behalf of user o2bancorp.local\extest_49ce0203
32a04
Additional information:
[Microsoft.Exchange.Data.Storage.WrongServerException]: The user and the mailbox are in different Active Directory sit
es..
+ CategoryInfo : OperationStopped: (Microsoft.Excha...onnectivityTask:TestOutlookConnectivityTask) [Test-
OutlookConnectivity], CasHealthStorageErrorException
+ FullyQualifiedErrorId : 6A829B37,Microsoft.Exchange.Monitoring.TestOutlookConnectivityTask
It seems to me that we don't have something setup properly in our environment. I think the reason that the lead Exchange admin does not have a CAS array defined for the COLO site is that some of our business locations that are part of the COLO site
and he doesn't want the Exchange server there servicing client requests except for in a DR scenario. He also has also had all receive connectors disabled. I enabled the two default receive connectors on the COLO Exchange server.Hi Hollisorama,
Base on my knowledge, this command is used to test end-to-end Outlook connectivity scenario for Outlook Anywhere, however outlook anywhere is disabled in your environment. It is the reason why you will get error message when running the command.
I recommend you refer to the following article to enable outlook anywhere, and then test connectivity again:
Enable Outlook Anywhere
Best regard,
Niko Cheng
TechNet Community Support -
Test-outlookconnectivity failure
Hi,
One of the CAS server i get error below after run the commad "Test-OutlookConnectivity -Protocol tcp"
RFRI::GetReferral. Failure -1.00
ErrorRecord: Task failed on timeout. Overtime = 00:07:49.4185783.
+ CategoryInfo : OperationTimeout: (Microsoft.Excha...onnectivityTask:TestOutlookConnectivityTask) [Test-
OutlookConnectivity], TaskException
+ FullyQualifiedErrorId : C918CCB1,Microsoft.Exchange.Monitoring.TestOutlookConnectivityTask
The casarray is defined on Hardware load balancer, versiyon is Exchange 2010 SP2 RU 4 v.2
how can i fix this problem?
Thank you in advance...on cas02,
ClientAccessServer ServiceEndpoint Scenario
Result Latency
(MS)
CAS02.cam.... email.cam.com Autodiscover: Web service request. Success
46.80
VERBOSE: [21:32:49.539 GMT] Test-OutlookConnectivity : RPC Endpoint = 'cas.cam.intra'
VERBOSE: [21:32:49.539 GMT] Test-OutlookConnectivity : RPC Endpoint = 'cas.cam.intra'
VERBOSE: [21:32:49.555 GMT] Test-OutlookConnectivity : RPC Endpoint = 'cas.cam.intra'
VERBOSE: [21:32:49.555 GMT] Test-OutlookConnectivity : RPC Endpoint = 'cas.cam.intra'
VERBOSE: [21:32:49.555 GMT] Test-OutlookConnectivity : Using connection parameters :
'cam.intra\extest_1eb30811639a4: Rfri/TCP-IP, [cas.cam.intra/Negotiate]'
VERBOSE: [21:32:49.555 GMT] Test-OutlookConnectivity : Address Book Operation = 'GetNewDSA', Input = 'userLegacyDN',
Input Value = '/o=CAM/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Recipients/cn=extest_1eb30811639a4'
VERBOSE: [21:32:49.555 GMT] Test-OutlookConnectivity : GetNewDSA Response - Result: 'cas.cam.intra'
VERBOSE: [21:32:49.555 GMT] Test-OutlookConnectivity : Address Book Operation = 'GetFQDNFromLegacyDN', Input =
'serverLegacyDN', Input Value = '/o=CAM/ou=Exchange Administrative Group
(FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=cas.cam.intra'
VERBOSE: [21:32:49.555 GMT] Test-OutlookConnectivity : GetFQDNFromLegacyDN Response - Result: 'cas.cam.intra'
VERBOSE: [21:32:49.555 GMT] Test-OutlookConnectivity : RPC Endpoint = 'cas.cam.intra'
CAS02.cam.... cas.cam.intra RFRI::GetReferral.
Success 15.60
VERBOSE: [21:32:49.555 GMT] Test-OutlookConnectivity : RPC Endpoint = 'cas.cam.intra'
VERBOSE: [21:32:49.555 GMT] Test-OutlookConnectivity : Using connection parameters :
'cam.intra\extest_1eb30811639a4: Nspi/TCP-IP, [cas.cam.intra/Negotiate]'
VERBOSE: [21:32:49.555 GMT] Test-OutlookConnectivity : Address Book Operation = 'Bind'
VERBOSE: [21:32:49.571 GMT] Test-OutlookConnectivity : Address Book Operation = 'GetHierarchyInfo'
VERBOSE: [21:32:49.571 GMT] Test-OutlookConnectivity : Address Book Operation = 'QueryHomeMDB', Input =
'primarySmtpAddress', Input Value = '[email protected]'
VERBOSE: [21:32:49.586 GMT] Test-OutlookConnectivity : /o=CAM/ou=Exchange Administrative Group
(FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=cas.cam.intra/cn=Microsoft Private MDB
VERBOSE: [21:32:49.586 GMT] Test-OutlookConnectivity : /o=CAM/ou=Exchange Administrative Group
(FYDIBOHF23SPDLT)/cn=Recipients/cn=extest_1eb30811639a4
VERBOSE: [21:32:49.586 GMT] Test-OutlookConnectivity : Address Book Operation = 'GetNetworkAddresses', Input =
'serverLegacyDN', Input Value = '/o=CAM/ou=Exchange Administrative Group
(FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=cas.cam.intra'
VERBOSE: [21:32:49.586 GMT] Test-OutlookConnectivity : ncacn_ip_tcp:cas.cam.intra
VERBOSE: [21:32:49.586 GMT] Test-OutlookConnectivity : RPC Endpoint = 'cas.cam.intra'
CAS02.cam.... cas.cam.intra NSPI::GetProfileDetails.
Success 31.20
VERBOSE: [21:32:49.602 GMT] Test-OutlookConnectivity : RPC Endpoint = 'cas.cam.intra'
VERBOSE: [21:32:49.602 GMT] Test-OutlookConnectivity : RPC Endpoint = 'cas.cam.intra'
VERBOSE: [21:32:49.602 GMT] Test-OutlookConnectivity : Using connection parameters :
'cam.intra\extest_1eb30811639a4: Mailbox/TCP-IP, [cas.cam.intra/Negotiate]'
VERBOSE: [21:32:49.602 GMT] Test-OutlookConnectivity : Mailbox Operation: 'EcDoConnectEx', Target mailbox:
'/o=CAM/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Recipients/cn=extest_1eb30811639a4'
VERBOSE: [21:32:49.602 GMT] Test-OutlookConnectivity : RPC Endpoint = 'cas.cam.intra'
VERBOSE: [21:32:49.602 GMT] Test-OutlookConnectivity : RPC Endpoint = 'cas.cam.intra'
VERBOSE: [21:32:49.602 GMT] Test-OutlookConnectivity : EcDoConnectEx Result: '0'
VERBOSE: [21:32:49.602 GMT] Test-OutlookConnectivity : RPC Endpoint = 'cas.cam.intra'
CAS02.cam.... cas.cam.intra Mailbox::Connect.
Success 0.00
VERBOSE: [21:32:49.602 GMT] Test-OutlookConnectivity : RPC Endpoint = 'cas.cam.intra'
VERBOSE: [21:32:49.617 GMT] Test-OutlookConnectivity : EcDoRpcExt2 Response - Result: '0'
VERBOSE: [21:32:49.617 GMT] Test-OutlookConnectivity : EcDoRpcExt2 Response - Error code: '0'
VERBOSE: [21:32:49.617 GMT] Test-OutlookConnectivity : RPC Endpoint = 'cas.cam.intra'
CAS02.cam.... cas.cam.intra Mailbox::Logon.
Success 15.60
VERBOSE: [21:32:49.617 GMT] Test-OutlookConnectivity : Admin Audit Log: Entered Handler:OnComplete.
VERBOSE: [21:32:49.617 GMT] Test-OutlookConnectivity : Ending processing &
And there is nothing on event log related with this issue....
actually, we get error from SCOM like this,
Alert: TCP Connectivity with Autodiscover - Address Book failure (ABREF) Resolution state....
Verbose: Using connection parameters : 'cam.intra\extest_1eb30811639a4: Rfri/TCP-IP, [cas.cam.intra/Negotiate]'
Verbose: Address Book Operation = 'GetNewDSA', Input = 'userLegacyDN', Input Value = '/o=CAM/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Recipients/cn=extest_1eb30811639a4'
Verbose: Microsoft.Exchange.Rpc.RpcException: Error 0x5b4 (This operation returned because the timeout period expired) from cli_RfrGetNewDSA RPC EEInfo is not enabled or there is no error on this thread.
at ThrowRpcException(Int32 rpcStatus, String message)
at Microsoft.Exchange.Rpc.RpcClientBase.ThrowRpcExceptionWithEEInfo(Int32 rpcStatus, String routineName)
at Microsoft.Exchange.Rpc.Rfri.RfriRpcClient.GetNewDSA(String userDN, String& server)
at Microsoft.Exchange.Monitoring.RfriClientWrapper.<>c__DisplayClass7.<GetNewDSA>b__6()
at Microsoft.Exchange.Monitoring.OutlookConnectivityContext.RpcExceptionWrapper(Func`1 protectedCall)
Verbose: AddressBook operation failed. Operation = 'GetReferral', Error = 'The Address Book Referral operation failed. Operation = '<GetNewDSA>b__6', returnValue = '1460', server = 'CAS01.cam.intra', user = '/o=CAM/ou=Exchange Administrative Group
(FYDIBOHF23SPDLT)/cn=Recipients/cn=extest_1eb30811639a4', .' -
Jmeter test load : iview not compatible
Hello,
I use Jmeter to test our server response time. I send a http request to the sap portal homepage and the server send back an html page with the message :
<b>iView is not compatible with your browser, operating system or device. Contact your system administrator</b>
So I believe that my results are not accurate due to this error message. Can I configure Jmeter or SAP Portal so that I can carry on my tests or is there a better tool for server test load ?
Thank you for your answers.Hi Christophe,
the reason is that iViews can have - and have by default - a restriction of supported browsers. If the http request does not declare to match these settings, the portals gives the answer as you have realized.
See SAP note 933452 for further details.
A workaround can be as described in this note to set the allowed browsers to (,,*), which means no restriction at all. Or maybe you could just pass for example IE settings within the header of the http request, so that the portal thinks it's an IE which does the request, and answers with full response.
Hope it helps (for sure it will)
Detlev -
Testing success/failure of archiveLogFile() method of servermanager
When attempting to archive a log file programmatically using the archiveLogFile() method of servermanager is there a way to test the success/failure of the action. I tried
adminObj = createObject("component","cfide.adminapi.administrator").login("topsecret");
serverObj = createObject("component","cfide.adminapi._servermanager.servermanager");
result = serverObj.archiveLogFile("logfilename");
writeDump(result);
However, result is undefined.
Thanks!That function has a void returntype, that's why.
http://www.cfexecute.com/admin-api-documentation/servermanager-cfc/#method_archiveLogFile
Instead you'd have to do something like a directory read to see if the file had been renamed. -
Export to Reporting Schema failure
Can I get some help with the below error when attempting to export to reporting schema. I've reviewed the repository and 79 tables were created, but no data. I looks like this error occurs at the end of the process, but prior to sql commit. The DB is Oracle XE 10g.
"Error occurred while exporting to Reporting Schema.See the log file for details"
2011-11-12 06:33:45,859 [Thread-11] ERROR ReportsHandler - Error Exporting to Reporting Schema:
java.lang.NullPointerException
at oracle.dbtools.crest.model.xtdmapping.XtdMapping.isOwnerDesignPartLoaded(Unknown Source)
at oracle.dbtools.crest.model.xtdmapping.XtdMapping.getOwnerObject(Unknown Source)
at oracle.dbtools.crest.exports.reports.RSMappings.export(Unknown Source)
at oracle.dbtools.crest.exports.reports.ReportsHandler.export(Unknown Source)
at oracle.dbtools.crest.swingui.ControllerApplication$ExportToReportsSchema$1.run(Unknown Source)
Environment
About
Oracle SQL Developer Data Modeler 3.0.0.665
Version 3.0.0.665
Build 665
Copyright © 2008,2010 Oracle. All Rights Reserved.
IDE Version: 11.1.1.4.37.59.36
Product ID: oracle.datamodeler
Product Version: 3.0.0.665
Version
Component Version
========= =======
Java(TM) Platform 1.6.0_23
Oracle IDE 3.0.0.665
Versioning Support 3.0.0.665Hi,
you can try Data Modeler 3.1 EA1 (available here http://www.oracle.com/technetwork/developer-tools/datamodeler/overview/index.html) or EA2 when it's published - mappings problem is fixed there.
Philip -
My Nano turns itself on in the early hours.......
My Ipod turns itself on in the small hours, even though I make sure I switch it off and lock it. This means that the battery is dead every time I try to use it. Any ideas?
You most likely have an alarm set.
To check go to extras/clock/alarm and set it to off. Check the calendar also, extras/calendar/alarm.
Maybe you are looking for
-
Xml parser procedur which worked in oracle 8.1.7 not working in oracle 9ir2
hi all, THE BELOW PROCEDURE TO PARSE A XML WEB PAGE AND RETRIEVE THE DATA INTO TABLE IS WORKING WELL IN ORACLE 8.1.7 , BUT WHEN WE UPGRADED TO oRACLE 9I RELEASE 2 ,,ITS NOT WORKING AND GIVING THESE ERRORS,, 13:44:56 Error: ORA-29532: Java call termin
-
Hi All, Can anybody send the BDC program for the F-92 t-code. Thanks and regards, krish......... Moderator message: please search for information and try yourself before asking. Edited by: Thomas Zloch on Nov 9, 2011 1:24 PM
-
ITunes 10: Is this supposed to happen?
Whenever I click on iTunes 10, my dock bar and menu bar disappear. They don't scroll down and up, like any animation. Just poof, gone. Is this supposed to happen? And if so, how do I get to the preferences. And if you want to help me out with this, h
-
Lines are breaking in global definition of a smartforms
HI, Every one, today I am facing issues with smartforms. In initialization tab of global definition,the lines are breaking when am scroll it down. the screen shot attached here with(if being needed). tried to
-
Remote works as advertised, but...
I just set up Remote and it works perfectly, controlling my music library stored on my Time Capsule via my Macbook Pro. But, I was thinking (hoping) that I could use Remote to simply listen to my music on my Touch (headphones plugged in, laying on co