Jmf audio and video control panel not show up in netbeans

I am running AVReceive2 in netbeans. The control panel does not show up when I run this in Netbeans. When I run the same code in DOS I get the control panel. The core component to the panel has not been changed. Am I missing something. I just reinstalled everything and still have the same problem. I need to get this resolved ASAP. Thank you for all the help.

Laughincrow wrote:
Can you send me an image of what you are talking about? I think I have it set but I am not 100% sure.No, I can't send you an image. You should consult with a Netbeans forum if you need help with Netbeans beyond what I've told you.
Also, I can't think of anything that would cause that problem other than library issues, because it sounds like you have JMF installed correctly if it works in a terminal, but Netbeans overrides your system settings to use its own.

Similar Messages

Selected audio and video devices may not match

Hello - I was able to Print to Video w/no problem, from my Mac Book Pro, to my Panasonic PV-GS320 w/no problem. Now, all of a sudden, when trying to do this, I get this msg.:
'The selected audio and video devices may not match. Please verify that the a/v outputs are externally routed to the intended device(s).'
Not sure what happened, or what changed, but here is my setup:
Sequence & Capture Presets are both: DV NTSC 48 kHz
Device control preset: FireWire Basic
Video Playback: Apple Firewire NYSC (720 x 480)
Audio Playback: Default
Like I said, I don't know what got changed, but, it was working before - hope someone can help, thanks so much!!
Kristina

I think I found the problem...I had forgotten to switch my Device Control Preset back to FireWire, from the previous non-controllable - thanks so much!
Message was edited by: Kristina Latour
Message was edited by: Kristina Latour

Online audio and video files are not working

i got a plugin for shockwave flash(adobe flash player) i thought it is the latest version so i downloaded it and installed it. Before installing the new flash player i was able hear song online and can watch videos but now both audio and videos are not working.

thanx for your advise but i got to hav one more problem and that is...i have downloaded the new version setup of firefox but after extracting it stops working and the installation process ends automatically...so please help.
the file that i downloaded had the "Firefox Setup Stub 23.0.1"

Audio and Video Calling is not supported by my OS

Is there any way I can use Skype Audio and Video Calling using Chrome OS? Please help me. Thanks

Seriously - not supported on Chromebook? My girlfriend stationed overseas is using a Chromebook and so do I. We signed up for Kkype so we could video chat. Not sure what we're going to use now but pretty disappointed in Skype.

Bookmarks options button in icloud control panel not showing

Hello,
i installed icloud control panel version 3.1 for windows 8 and can't sync bookmarks with chrome. I installed the chrome extension, restarted, but keep the same only internet explorer shows and it can't be changed.
Thanks for your help.

There may be an electrical connection issue inside the printer, but it may also simply need a power reset. I would advise trying to perform a Hard Reset on the printer.
* Unplug unit while powered on
* Unplug other end of power cord from the direct wall outlet
* Wait 30 seconds
* Plug unit back in for power
As well, there is a document with steps to troubleshoot when a printer has a blank display. The document is located here. Hope this helps.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

What is Conexant D850 PCIV.92 Modem tv_confMgrErr35? How to fix it. Also how to get flash player to show up in control panel (not showing up)

What is conexant D850PCIV.92 Modem tv_configMgrErr35? How to fix this.
Why doest flash player show up in control panel --to clear cache--How to fix it also. Java doesnt show upn in the control panel since I updated it either.

kestark
This is Vista.
Go to the Inspiron 1525 support page. Find the small blue "Change OS" and click on the arrow. Select Vista.Then download and install these 3 items with a restart between each one.
1. Dell System Software in the System Utilities category.
2. Intel Mobile Chipset in the Chipset category.
3. Sigmatel audio driver in the Audio category.
See if it works any better after you get the Sigmatel driver installed.

Control panel not showing up

the control panel on my hp photosmart C8180 all in 1 printer will not come on and the printer is on.
This question was solved.
View Solution.

There may be an electrical connection issue inside the printer, but it may also simply need a power reset. I would advise trying to perform a Hard Reset on the printer.
* Unplug unit while powered on
* Unplug other end of power cord from the direct wall outlet
* Wait 30 seconds
* Plug unit back in for power
As well, there is a document with steps to troubleshoot when a printer has a blank display. The document is located here. Hope this helps.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

Keyboard: audio and Brightness control keys not working with or without fn

The Keys for controling Audio and Brightness (F1-F5) do not work.
Also combined with pressing the "fn" key the keys do not work.
So i only control audio with the remote control or the slider in the menubar.
Making a reboot with deleting pram didn't help.
I'm running the up to date version of leopard on a macbook pro (core2duo).
I also searched in the forum for this problem.
I oten read about "sytem control"-"keyboard and mouse"-"keyboard" and the F1, F2, etc. to use as...
but switching this button on or off doesn't change anything.

problem solved:
the couse was the software update 1.1 for macbook pro, because there i had the problem like in this thread: http://discussions.apple.com/thread.jspa?messageID=6142512&#6142512
and did the solution like that, but there i maybe made some mistakes with renaming and copying, so i rinstalled the update and renamed it a copied to plugins, and now all works as it should.
thanks for help

My videos and video podcasts do not show on my ipod but do on itunes

Hello,
My videos show fine on my itunes (movies and podcasts) but then i go to try them on my ipod and the screen remains blank! please help!

That happened to me too. It was in the wrong format for my IPod to play and I redownloaded everything and it worked again. Annoying, but it worked.

My ActiveX Controls that i downloaded (APTLaser Control and APTTEC Control) are not showing up

I got a new computer and im trying to bring over all of my files from my previous computer, however after downloading everything i was unable to use my ActiveX controls for the above objects. When i try to reinsert the object, they are not there, how to i bring in new controls to insert into the ActiveX container? Labview
-Danny

Hi zhuangd1,
Did you try registerin the ActiveX control manually, as described here?
Cheers!
TJ G

My ipod touch 4g audio and video is totally not working. Updated the ipod with the latest version and also tried to restore it several times and that didnot work. Sound system is totally not working. plzzzz help..

My ipod touch stopped playing videos and music for the past three days rest all are working fine.
I doubt the sound system is gone. i tried restoring it several times. I havent mishandled it. Few days back there was audio distortion and slowness so i upgraded to the iOS 5 but the audio/ video doesnt work. Alerts ,sounds ... donot work..Please help me out...

Try a restore to factory defaults/new iPod. If still problem then you likely have a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

Audio and video do not sync when exporting

the audio and video content do not sync when exporting to media browser or quicktime.. at times the audio is delayed, or ahead of the video

Wow, I was just about to post something similar. I've tried 4 different times, wasted a few dvds, and tried various ways of outputting to solve this...nothing. Here's my situation;
• I have a series of stills, with music underneath...kind of like a slide show.
• That ends, both music and visual, and I go to a black screen/slug that is :22, to give some breathing room before the video that follows. Also, the audio track fades out at the end of the stills...it does not continue into the slug.
• After the :22 of black, I fade into a video. HOWEVER, everytime I've done that, the AUDIO portion of that video is starting while there's still black on screen, then when the video comes in, it's way behind.
I've adjust the audio to now end before the slug, thinking that was somehow making iMovie go wonky. Didn't work. I've wasted a few dvds before I got smart and started checking before burning. And still, everytime, that section is not syncing, but, i syncs in iMovie, where I made the video.
This is HUGELY frustrating.

Strange export result in FCP 7- audio and video output not in sync anymore

I have a problem exporting edited videomaterial. After export audio and video they are not in sync anymore. There's a difference of 8 sec when exporting audio and video separatly. Movie is total 61 min long.
Video and sequence settings are HDV1080i50, 25fps, 48khz, 16 bit, mono.
What could that be ?

Well now that I look at all the clips in FCP more closely I see some clips from the same tape are in sync and others are out of sync. And one section of tape which I captured twice was in sync on one clip and out of sync on the other. So it can't be the tapes.
Maybe the sync problem is caused by not coordinating the tape playing and FCP capturing properly every time! So I will try re-capturing the problem sections of tape.

Print to Video Error msg: audio and vide devices may not match

When I attempt to print to video (using a Sony DV deck that has werved me well for years) I receive the message:
"The selected audio and video devices may not match:
-Apple FireWire NTSC (720 X 480)
Please verify that the audio and video outputs are externally routed to the intended device(s).
Do you want to proceed?"
I tried proceeding, and the video images output to the tape but without a sound track.
What to do? I must deliver a tape to my client!
I recently did a software update to 10.4.6. Could that be part of the problem?
Of did some setting change somewhere without my knowing it, and I need to reset it, if so what?
Thanks in advance

Hello!
Thank you for this. I did check the audio playback settings and it was NOT set to audio follows video. I then CHANGED it as you have kindly instructed. The audio video settings box you mention was NOT checked, so I didn't need to do anything there.
I then tried o launch Print to Video (not Edit to Tape) and sadly, the same error message occurred. Any suggestions would be much appreciated.
I am running FCP 4.5, recently upgraded to OS 10.4.6
Thanks in advance.
Hey Pamela,
Have you been monitoring externally this whole time?
If you have, and you've been getting external audio
and video, then this is probably a case of a
setting being off somewhere.
First, check your View > Audio Playback
setting. It should be set to Audio follows
Video.
Second, press Option-Command-Q to bring up the
Audio/Video Settings dialog. Click on the right-most
tab (A/V Devices) then confirm that the box for 'Use
Different output for Edit To Tape/Print To Video' is
not checked.
And please confirm that you're doing a Print to Video
and not an Edit To Tape. I ask because the only time
that I can remember getting this message is when I've
tried to do an Edit To Tape and didn't drag the
correct sequence from the browser (if I remember
correctly, I accidently dragged a sequence that was
also open in timeline).

[SOLVED ]SX10 TC7.3 no audio and Video when calling

Hi,
I have very wierd issue with one sx10(TC7.3.0) endpoint. When I make a call to another sx10 (TC7.1.4) then signalling works fine and call is connected but there is no audio and video.It is not working even when I call to some external different type video endpoint. I noticed that there is no receiving info about audio and video but transmit codecs and other info looks correct.
Hope someone can help me to troubleshoot the problem.
More info about my solution:
I use CUCM with VCS-c and VCS-E. All endpoints are registered to CUCM. I have 16 SX10 endpoint with TC7.1.4 and one TC7,3,0. I think upgrading all endpoint to TC7.3.0 is not the solution because there are problems also with all other types enpoints.

Yes, Actually the problem was firewall rule!
The main problem was that these two endpoints didnt saw each other. ( Ping - Packet loss )
Signalling was working fine because both of them got ping CUCM but not each other :)
So problem is solved.
Thanks.

Jmf audio and video control panel not show up in netbeans

Similar Messages

Maybe you are looking for