JMF for Linux - FOR DOWNLOAD

Hi,
can anybody give me the JMF for Linux from blackdown?
It is not available now because of some license agreements stuff?
Can somebody give me an older version, which works on Linux?
thnax!

Hi,
It's still possible to download the Blackdown of the JMF (2.1.1c).
Here's the link:
ftp://ftp.easynet.be/blackdown/JMF/2.1.1/i386/jmf-2_1_1c-linux-i386.zip
Have fun,
vlerKsKe

Similar Messages

CORBA - idltojava for Linux for jdk1.2.2

Hello !
I need the idltojava compiler for linux Operating system for Jdk 1.2.2 (so the idlj for jdk1.3 will not do). I looked on the site here but only windows and solaris versions are available.Can anyone guide me to some download site where I can get this ?
Thanks in advance,
Lakshmi Nayak

Hello !
I looked at the site but could not find the idltojava for java versions before 1.3.
However I have found out from another source that idltojava compiler for linux for java version 1.2 is not available.
But Thanks a lot Frank-Michael for guiding me to such a good site(http://blackdown.org) for java-linux ! :-)
Thanks,
Lakshmi Nayak

Oracle 11g for Linux PC Download

I just downloaded Oracle 11g R1 for LINUX from this OTN site. Do I also get the Enterprise Manager?

Hi,
You can download Oracle Enterprise Manager 11g from:
Oracle Enterprise Manager Downloads
http://www.oracle.com/technetwork/oem/grid-control/downloads/index.html
Thanks,
Hussein

Where can I find the latest version of agent for linux for download?

I have trouble when I try to install an agent in Linux for opscenter, I get this message: status bad interpreter, I check manually the script and I found that many internal scripts are written for Solaris in the last version release 2 PSU1. Can everybody help me?

Hi Michele V,
Yes I run the OCDoctor and output was:
./OCDoctor.sh --agent-prereq
Ops Center Doctor 4.33 [Linux]
========== Checking 12c Agent Controller Requirements ... ====================
ERROR: gettext is not installed.
./prereq/agent_prereq_all.sh: line 57: gettext: command not found
./prereq/agent_prereq_all.sh: line 57: gettext: command not found
./prereq/agent_prereq_all.sh: line 57: gettext: command not found
./prereq/agent_prereq_all.sh: line 57: gettext: command not found
ERROR: 32-bit version of libxml2 is not installed.
./prereq/agent_prereq_all.sh: line 57: gettext: command not found
./prereq/agent_prereq_all.sh: line 57: gettext: command not found
./prereq/agent_prereq_all.sh: line 57: gettext: command not found
./prereq/agent_prereq_all.sh: line 57: gettext: command not found
OK: Servicetag is not installed (sun-servicetag)
OK: No old agent / conflicting packages were found
OK: No old agent processes are running
OK: LD_LIBRARY_PATH is not set
OK: Checked for ssh requirements
./prereq/agent_prereq_all.sh: line 57: gettext: command not found
You have mail in /var/spool/mail/root
I appreciate yoiuyr help

Is there a way to use Labview for Linux for IBM AIX 5.1.

I think any application built for linux can run on the AIX 5.1 if the application is recompiled on the AIX 5.1. So theoretically NI can just recompile there Linux version of Labview on the AIX 5.1 and it will work. Is there a possibility that NI will port Labview for AIX 5.1.

I think that the use of LabVIEW for linux is platform independent as far as hardware. I believe that as long as you are running a compatible GUI (I believe XWindows and KPT??? are two that are recommended - check ni.com/linux for more information. So, for your purposes, as long as you can install the proper GUI, and then LabVIEW for Linux, you can then run, code, compile, and deploy applications on the AIX 5.1.
I am personally VERY interested in knowing about your success (or failure, should that unlikelyhood occur) on Linux. If you browse the topics, there is actually one on non-windows useage of LabVIEW. I am currently setting up my first Linux machine at my home office, and am very curious to know how other people do with this 'adventure into unc
harted territory'. The only documented useage I have seen is in Gary Johnson's newest edition of Power Programming.
Good luck, and please keep us posted. I sense that I am the only LabVIEW for Linux fan besides yourself. But please feel free to post to this thread, and to the topic.

Linux Bare Metal Provisioning with OEM Pack for Linux for RAC 11gGR2 OEL 5X

Hi,
Has anyone ever used the OEM Pack for Linux to provision Bare Metal Linux servers?
See: http://www.oracle.com/technology/products/oem/omp_linux.html
We are thinking of using this tool to provision our Linux Servers, because we are UL-Customers with OEL, and this Tool is free of Charge for UL- Premier and Basic Limited Customers.
I have only found Documentation which seem to suggest that the OEM Linux Pack is supported with OEM Grid Control 10.2.0.4 and Oracle 10G ,
but i am not sure if this Pack is supported for use with OEM Grid Control 10.2.0.5 and Oracle RAC 11gR2.
I would appreciate your Help on this.
Regards,
Pascal

user11999910 wrote:
but i am not sure if this Pack is supported for use with OEM Grid Control 10.2.0.5 and Oracle RAC 11gR2.Yes, it is. The Linux Management Pack is built-into Grid Control and ships with 10.2.0.5. I believe you need to add a few patchsets to get full provisioning support for Database 11gR2. There is a My Oracle Support article that lists all the recommended patches for Grid Control.

Oracle 10g for Linux x86_64 download problem

Hi all!
Due to security restrictions in our company, I can't download these two files from download.oracle.com - this
http://download.oracle.com/otn/linux/oracle10g/10201/10201_database_linux_x86_64.cpio.gz
and this -
http://download.oracle.com/otn/linux/oracle10g/10201/10201_companion_linux_x86_64.cpio.gz
because they have .gz extension. Has anyone have got theirs, - would you be so kind to rename files to .zip and share for two-three days till I download theirs to my desktop?
Thanks in advance.
Sincerely yours,
Maksym.
P.S. Sorry for my English.

I think the user community can't help you, the only guess I have is address this issue to the OTN Members Services forum:
Downloads Issues

Update: Install solution for latest Oracle9i for Linux/390 download

Release notes have been updated to include the following solution from MetaLink
Doc ID 158104.1 out of metalink.
++++++++++++++++
Copy of Doc ID 158104.1
++++++++++++++++
fact: Oracle Server - Enterprise Edition 9.0.1
fact: Intel Based Server LINUX
fact: RedHat 7.1
symptom: Installation fails
symptom: Error during linking
symptom: ins_plsql.mk
cause: <BUG:1843232>.
Versions of ld prior to version 2.11 ignored the "-z defs" flag. ld
version 2.11 and later have the ability to use this flag. Because of
this the genclntsh script fails to produce the libclntsh.so library on a
machine running ld > 2.11.
The "-z defs" is set in the variable LD_SELF_CONTAINED in the
genclntsh script.
fix:
When receiving this error during installation, follow these steps:
1. Open a new console window on the host as the installation user.
2. Set up the Oracle environment (i.e. ORACLE_HOME).
3. Make a backup of the $ORACLE_HOME/genclntsh script.
4. Remove the ${LD_SELF_CONTAINED} flag from the ld command in the 'Create
Library' section.
5. Run the genclntsh script.
6. Click on 'Retry' in the Universal Installer
The installation will now proceed.
This should be fixed in 9.0.2
+++++++++++++++++++++
END of Doc ID 158104.1
+++++++++++++++++++++

If the issue persists for you even after following all the steps please click on
to create your own topic. Please supply as much information (Windows version, Internet Explorer, content of any error messages you saw...) as possible so we can help you faster.
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

Instant Client for Linux for SPARC 64?

I'm running Linux on SPARC64 and I would like to compile PHP with the OCI module... BUT I cannot.
I either run in to TLS problems (which get fixed with LD_PRELOAD=libclntsh.so ) or I run in to missing Sun libraries (as expected, but I found no ports) like libkstats.
Is it possible to do what I want to do? I have thought about using the PHP and JavaBridge, but that doesn't seem to mean I don't have to use OCI libraries (libclntsh and etc)... and may be a huge performance hit (two interpreted languages? UGH!)
Ideas?

just curious... which distro are you running on SPARC 64??? :)

Re: Steel Engine Keyboard code for Linux for GT70-2P

nice sharing ~~

Hello All,
Just a few questions about system security and the upcoming Windows 10 upgrade.
Full System Specs below.
NOTE: I'm just looking to enhance my system security (upgrading from WIN 7 Home to WIN 10 Home in the next couple of weeks) and keep...

9iDS for Linux - OWB, Disco Admin etc are missing from download

I've just installed 9iDS release 2 on a laptop running SuSE 8.0 and Oracle 9i release 2 Enterprise Edition.
As my work primarily involves 9i database and OWB 9i, I was to say the least dissappointed that 9iDS for Linux does not include OWB, or for that matter Disco Admin or Reports Admin.
When you go to download 9iDS for Linux, the download page says "This download includes the full distribution of Oracle9iDS", and the previous page (which lists all the elements of the download, next to the links for Windows, Linux, HP-UX and so on) does not in any way indicate that OWB is not included in the download.
There is, separately downloadable, an 'early adopters' release of OWB for Linux, but this does not include the bridging technology to Discoverer, Express and 9i OLAP. As it's 'early adopted' presumably it's not too stable.
Has anyone used this? Has anyone tried using a laptop purely with Linux on it as a way of using 9iDS? Does anyone at Oracle know when a full release of 9iDS, with all the elements found in the Windows release, will be made available? In the meantime, Oracle should clearly state on the Linux download page that not all the elements of 9iDS are found in the Linux version.
Mark Rittman
Plus Consultancy.

I don't know the answer, but Designer will never be ported to Linux : It is a Windoze stuff...and without Designer...i will never be able to do 100% Linux :(

How to Install Oracle 11g on Linux for Power?

I've installed RedHat Enterprise Linux 5.4 on IBM PowerPC server.
Now I want to install Oracle 11g on it. But there are no Oracle 11g downloads for Linux for Power.
Is there any workaround so Oracle 11g can be installed on Linux on Power?

Hi,
I think you can forget it. Oracle 10g R2 was the last version supported on Linux PowerPC.
Cheers,
David
OCP 9i
http://www.oratoolkit.ch/knowledge/howto/installation/otn.php

Where can I find the Oracle Clusterware 11.1.0.7 for Linux x86

Hello,
I am testing upgrading Oracle 11g RAC from 11.1.0.6 to 11.1.0.7 on Linu x86 (RedHat 5.3/OEL 5.3)
I haven't been able to find the Oracle Clusterware 11.1.0.7 for Linux x86 download, which is required for the RAC upgrade.
Could someone tell me the patch/patchset number or how can I search for it in metalink?
Thanks!

Hi,
You need to download patch 6890831
Please see the metalink note 800603.1 for 11.1.0.7 patch set and installation instructions for Linux x86.
Hope this helps.
Regards
Satishbabu Gunukula
http://oracleracexpert.blogspot.com
[Click here to delete archive logs using RMAN|http://oracleracexpert.blogspot.com/2009/08/delete-archive-logs-using-rman.html]
[Click here for Oracle Data pump export/Import with Examples|http://oracleracexpert.blogspot.com/2009/08/oracle-data-pump-exportimport.html]
Edited by: Satishbabu Gunukula on Aug 26, 2009 10:32 PM

8i for Linux CD arrived

The subject says it all.
Now I just need to find a suitable
JDK/JRE for Caldera OpenLinux 2.2
Cheers,
Colin
null

Michael Seiwert (guest) wrote:
: Randall J. Parr (guest) wrote:
: : I have 8i for Linux (both downloaded and CD arrived today).
: : I have Redhat 6.0 2.2.5-15 with Oracle required kernel mods.
: : I have applied all the updates from update.redhat.com;
: : specifically the one required to run installer with
: : Enlightenment.
: : I have 512M RAM and 18G of SCSI hard disk with 10G free.
: : I have Blackdown jdk-1.1.7v3 installed and /usr/local/jre
link.
: : The jdk-1.1.7v3 runs some test Java programs and the Swing
: 1.1.1
: : demo just fine.
: : I have created the required user/groups.
: : I login as oracle and try to run the installer and I get the
: : following message:
: : Initializing Java Virtual Machine from
/usr/local/jre/bin/jre.
: : Please wait...
: : Error in CreateOUIProcess(): -1
: : : No such file or directory
: : I get the same message if run from the downloaded copy or
from
: : the CD.
: : Obviously the installer is expecting a directory which is
: missing
: : or which it doesn't have permission to acces BUT what
: : directory/file???
: : Any ideas?
: : Randall J. Parr
: : Temporal Arts
: : 608.833.4578
: Hi, there is a script called runIns.sh in the ../install/linux/
: directory, remove the /usr/local/jre/bin string and remove the
: -njit option at the end of the string, maybe that helps!
: Michael
I had a similar problem, but the error was that in /tmp the
installer was searching for the orainstall directory (all
lowercase) and not for the OraInstall; I have moved the
OraInstall dir into orainstall and everything worked
Claudio
null

64-bit version of collect for linux

Is there a 64-bit version of collect available for studio 9
for linux (for use on the AMD Opteron hardware)? If not, is
there any estimate of if and when this might be available?

It will be available in Sun Studio 10, but not Sun Studio 9. Sun Studio 10 will be available in late January.
(collect remains 32-bits, but it can collect data for either 32-bit or 64-bit executables.)
Availability and download information will appear at
http://wwws.sun.com/software/products/studio/index.html

JMF for Linux - FOR DOWNLOAD

Similar Messages

Maybe you are looking for