JMOD condition type value should be always rounded up instead of commercial

Hi Helpers,
I need one clarification from you all based on your expertise,
1. JMOD condition type value should be always rounded up instead of commercial.
2. i have been already made rounding up in the condition type JMOD in the transaction V/06. but unfortunatly not working.
3. after that we found that there is configuration change in spro (company code setting in the indai taxation-CIN) in the Logistic general> tax on goods movement>india> basic setting> company code setting for the commercialrounding, but the same is  already ennabled with SD rounding IND.
Need your expertise on this.How shall we make it round up always for JMOD condition value. below is an example for your further analysis.
Example: if values UTXJ is : 8,913.40 and JMOD will be calculated based on UTXJ as 10% thats is 891.34.
Actually this should be 892 as per the requiremen.t

I just recently rolled off a project in Europe that had an issue similar to this.  We were having rounding issues as a result of %  discounts. 
However, we did come up with a solution that is provided by SAP. 
Please review OSS note 80183 on SAP rounding and the solutions provided within the note.
I hope this helps.
Kind Regards,
Jason

Similar Messages

  • Purchase order one particular condition type vale should not inventorised

    Dear All,
                       I have a scenario in the purchase order particular one condition type value should not get inventorised that should goes to a seperate account. it should not added with material cost
    i have created a seperate condition type  ZZ01
    with condition class  : A - Discount or surcharge
    calcualtion type : A - Percentage
    and i have attached this condition type to pricing procedure in accurals i have maintained a seperate posting transaction.
    the amount is getting posted against the accural transaction event key.
    but its getting inventorised with material cost it should not get inventorised..
    what is the procedure...
    Regards
    Anand.
    Edited by: Anandhakumar Palanisamy on Mar 24, 2010 1:17 PM

    Hi..
    I have maintained for this condition type Accurals in M/06
    and i have maintained the Statistical tick mark in pricing procedure..
    but its getting inventorised...
    it should not inventorised...
    any other solution...
    Regards
    P.Anandhakumar

  • MM Condition Types values flow COPA

    Dear Gurus,
           My client requirement is MM Condition Types Values Should flow to COPA like SD to COPA. I had seen a screen that KE4IM is there we can map our COPA Value Field and MM Condition Types. But I am not sure that values flow to COPA, Because No document will be generated in FI or other while doing PO.
    Pl suggest me how can I fullfill this requirement.
    Regards,
    Balaji Bhonsle.

    Hi,
    If you read config doco for KE4IM you will find a statement:
    "It is also possible to transfer conditions from MM to update billing data in pooled payment in the IS Retail system. These are transferred according to the same rules as SD conditions."
    So KE4IM is only used in IS Retail. Are you IS Retail?
    If not you probably want to bring conditions from purchase orders to CO-PA.
    I agree with Ajay except for point 1.
    You can actualy trigger CO-PA posting during goods receipt (and invoice receipt) for PO.
    In order to achive it you need to activate "Purchase Accounting" in MM.
    SPRO -> Marterials Management -> Valuation and Account Assignment -> Account Determination -> Account Determination without Wizard -> Purchase Account Management
    Please read doco for Purchasing Account. In a nutshell when you activate it system will post addtional line item for GR and IR:
    Purchasing account and Purchasing Offseting account for value of purchased nmaterial and also for delivery costs.
    In table T030: Purchase account(EIN), purchase offsetting account (EKG), freight purchase account (FRE).
    Define EIN and FRE as cost elements and map to profitability segment in OKB9. Leave EKG as P&L account (no cost element).
    Then map cost elements to value fields in COPA.
    Done.
    Cheers,
    Szymon

  • Automatic determination of Condition type value

    Hi Friends,
    I have one requirement here as described below.
    In pricing procdure, I have defined 3 condition types for 3 types of taxes i.e. GST, HST and PST as per client requirement. The value of each condition type is fixed i.e. GST=5% of Gross, HST=7% of Gross, and PST=11% gross. These condition types are not applicable always in the PO. My requirement is when user selects any condition type, then system should calculate the condition type amount and value automatically.
    Ex. Suppose the purchase price of a material is 100 USD. In the PO, if user selects GST condition type, then 5% should be determined automaticall in the condition type amount and condition type should be calculated accordingly i.e. 5 USD. One important thing is  to note that these condition types will be selected by user as per their requirement and the corresponding % of the condition type should be determined automatically.
    Please advice.
    Thanks & regards
    Satya

    Hi Satya,
    You can achieve this using access sequence.
    1. Create one Access Seq or use Existing seq in your system
    transaction code OLME
    Purchasing --> condition --> Define Price determination proces --> Define Access Seq
    2. Transaction M/06 (Condition Type)
    Select your condition code (say ZGST) and click onthe detail view.
    Assign the Access Seq to this Condtion
    In the Manual Entries Field Assign 'C' for manual entry priority.
    save the entries.
    3. MEK1 - Create Condition Records
    Depending upon your access sequence priorties, define the condtion 'ZGST' with its rate applicable.
    similarly maintain the other condition code.
    After that create Purchase order. In condtion tab, whenever you enter either of these condition system will take the rate from condition records.
    Hope it solve ur issue.
    Regards,
    S Anand

  • Error at JMOD condition type

    Dear Gurus,
    I am crating sales order with Invoice Correction req as a order type but when we go to pricing procedure of 2nd line item, here I can change basic price & other taxes but I won't be able to change Basic Excise Duty which I need to change from 10% to 12%.
    I used Tax procedure is TAXINJ, but in JMOD condition type I am not able to change % value.
    I tried to change % value with FV12, FTXP & VK12 but system won't allow to change.
    Kindly Guide
    Thanks

    Moved from SAP ERP Sales and Distribution (SAP SD) to Internationalization and Unicode.  You have already been asked to post all your CIN related queries here but again and again, you are posting in wrong forum.
    Coming to your requirement, explain what exactly you were trying to do.  If you are trying to create a billing document against a delivery and you want to fetch a different excise duty in billing, then you can maintain the required date in the field "Service Rendered Date", provided you maintained condition record with the validity period of the service rendered date.
    G. Lakshmipathi

  • How to change the manual condition type value in change sales order BAPI

    Hi All,
    My scenario here is, i want to either add/change the manual condition type value during change of SO.
    When i'm trying to pass the  order_conditions_in and  order_conditions_inx tables in  'BAPI_SALESORDER_CHANGE'.
    Condition type is coming at item level but the value is setting to zero. Pls. help if anyone has any idea how to handle this.

    Siva,
       I guess you posted in Wrong Thread. You need to post in WAS section.
       check for any BAPI's available in CRM.
    Nagesh Ganisetti.

  • MM Pricing Condition Type values in Condition Tab updation while CHANGE PO.

    Hi,
    The process of PO creation and PO change is through inbound IDOC posting.
    I created a PO with configured MM pricing procedure.
    While creating PO, the PO is created as required with different Condition Type value break-ups [PBXX, Discount, Surcharge etc] in the PO as required via Inbound IDOC processing.
    While CHANGING the same PO, the Condition Type break-ups [i.e. pricing related values] in the PO are NOT changing in the PO via Inbound IDOC processing.
    What needs to be done to update the Condition Type break-ups in the PO while changing PO through IDOC processing process?
    This problem is not occured while manual / on-line changing of PO valueS and saving the PO & exists through IDOC processing method ONLY.
    Thanks in Adv,
    RK

    Hi
    Try this function module
    FM RV_CHECK_CONDITION_VALUE
    Regards
    Hareesh Menon

  • Pricing : Condition type value need tog get from the lowest of 4 other cond

    Hi,
    I have one requirement in one pricing procedure.
    I need to calculate condition value of one condition type from the lowest value of other 4 condition tyeps. These condition types values are not defined as a subtotal.
    So if I decide to write a formula on condition values, is there
    any way to select these values and choose the lowest of them?
    Please also advice if there is any other way such as condition exclusion
    or so?
    Thanks and regards,
    Anand

    Anand,
    As you have mentioned you can use condition exclusion for such a requirement.
    here is a detailed description of how you can achieve this: use the menu path IMG> Sales & Distribution> Basic Functions> Pricing> Condition Exclusion> Condition exclusion for group of conditions.
    When you execute this IMG acitivity you get a window with three options
    1.Define Condition Exclusion Groups
    2.Assign condition types to the exclusion groups
    3.Maintain condition exclusion for pricing procedures
    We will use these three options one by one, we start with the first
    1. Define an exclusion group, lets say EX01 and give a description
    2 Assign the four condition types that you want to compare to this exclusion group under this option
       lets say EX01 ZK01
                   EX01 ZK02
                   EX01 ZK03
                   EX01 Zk04
    3. under this third step, select the pricing procedure that you are working on and from the left margin click on 'Exclusion'. click on 'New Entries' and make the following entries (example)
             Sno.   Cpr         ExGr1
              10      A            EX01                leave ExGr2 blank, Save your entries
    Check if your purpose has been met or not. Do give your feedback
    Regards,
    PATHIK

  • Condition type value not update in sales order

    Hello Guru's
    As per the  sales order in VA01 the condition type value i.e surcharge value is not updating in sales order.
    But I have maintain the condition record(Surcharge)also and in Condition technique I have checked every thing is correct .
    please find below I have attached the Screen short .
    Please give me solution Asap.

    Hi Sukdev,
    Have you checked the respective pricing procedure for From and To reference step maintained against the condition type ZSUR?
    Regards,
    T.R.S.Praveen

  • How to stop non statistical condition type value from updating total amount

    Gurus,
    Can any body explain me how to do following setting,
    How to Stop non statistical condition type value from updating Total Amount
    Regards,
    Sai

    Dear Sai,
    You need to make that condition type as Statistical one
    Go to SPRO - Sales and Distr. - Basic Functions - Pricing - Define and Assign Pricing Proc - Maintain Pricing Proc - Control Date
    Select the proc. - select the condition type and activate the  check box Statistical
    This will show the amount of the condition but will not consider for the net value calculation
    Hope this will help you
    regards,
    Sagar

  • Is it possibale statistical condition type value at FI GL account.

    Dear Expert,
    Hi I have a requirment like:  Add new manual condition types at pricing porcedure level.
    When I am creating SO these condition types value wont calculate in net value but that value needs to flow in to respective G/L account.
    How we can map this requirement at Pricing Procedure level.
    Can you please suggest.

    Hi Ranganayakulu,
    Yes, it is possible. Did you try to search in the forum. The answer is already provided in one of blog of SCN (" DOC-29788" in google).
    Please search and let us know.

  • Condition type value rounding

    Hi Experts
    I want to know about rounding of decimal in PO conditions. We have customised condition type like ZFRE in % and it is found that when PO is created i see  that ZFRE value is rounded i.e suppose if value is coming as 3.97 then the system takes automatically 4 and if value is 39.37 then the value becomes automatically 39. The decimal places dont appear in PO. I thought it is because of condition type configuration.
    The ZFRE condition type has setting as:
    rounding rule - commercial(standard)
    It is not set as rounding up or rounding down. How the values are not geting rounded?
    Thanks
    Dinakar

    Hi
        From the above suggestion you cant round off the condition type as said. Use t.code OB90 and for your company code and currency and maintain 100 in the field 'Unit to be rounded up to'. But it is client level setting. Be careful while setting this.
        Then go to your pricing procedure and assign Routine-17-Rounding as perT001R in Altcaltype field. Then create order. Your requirement will be solved.
    Reward if helpful

  • Condition type value updation using characteristic value in sales order

    Hi Experts,
    We are implementing SAP for one of our Spain client. In that one of the Legal requirements is, whenever they are selling the finished products to domestic customers who contain OIL as one of the component then, some additional cost needs to be calculated and collected from customer and which needs to be paid back to Spain Government every month on Region basis.
           If OIL is not a component to produce the finished product then, not required to charge the customer additionally.
    The OIL content used to produce every finished product will vary based on product characteristic value. Meaning, for some finished product the OIL used will be 2.2 KG and for some products it will be 3.5, 4.3 KG and etc.
    Since various combinations of products are available for the client, during sales order creation we are planning to update some special characteristic which the data flow from u201CVariant Tableu201D. In the variant table we are going to maintain the OIL Quantity required making finished product.
    But we are not sure how to activate a new condition type with the value fetched in the special characteristic. This new condition type needs to be activated based on this characteristic value and multiplied with total order quantity and price to charge from customer.
    Example, the special characteristic fetched the value of 2.2 KG based on variant table. Total Order quantity is 10 PC and charge is 0.06 EURO per KG. in this case, (2.2 x 10 ) x 0.06 EURO = 1.32 EURO
    I need the expert opinion how to activate the new condition type based on characteristic value and achieve the above requirement.
    Thanks in advance.
    Warm Regards,
    VEL

    Hello,
    I have replicated the whole requirememt in IDES and getting the price calculation as needed but the only issue with the Conversion factor for the condition type. Either you need to maintian the conv factor in material master or need to enter manually for the condition type in SO. Some how you have to maintain the conversion factor to calculate the price for the condition type in different unit.
    For easy of understanding Lets make the whole requirement in 2 parts
    Part - 1
    Oil qty calculation. For convenience sake I have taken oil qty also in TO
    1) Created a num char OIL_QTY1 with length 9 and decimal places 5 and UOM as TO
    2) Created Variant table to infer the OIL qty in TO per piece of finished prod ( This oil qty data may be depends on various factors). For certain Finished products the oil qty may be 0 or blank
    3) Created a REF char SO_QTY  to pull the SO qty to configuration and add this char in class 300(Table:VBAP,Field :KWMENG)
    4) Created another char SO_OIL_QTY  (Num with length 9 and decimal places 5 and UOM as TO)
    5) Created a PROCEDURE say PROC_SO_OIL_QTY with code
    *$self.SO_OIL_QTY = $self.OIL_QTY1 * $self.SO_QTY*
    6) Create another PROCEDURE as mentioned earlier with modified code
    $SELF.A_VARCOND = 'TEST_001' if OIL_QTY1 specified,
    $SET_PRICING_FACTOR ($SELF,A_VARCOND,'TEST_001', SO_OIL_QTY)
    Note: Maintain proper seq of the procedures in profile. The Qty cal proc should be before the price related procedures.
    PART-2
    1) For the condition type maintained 60 EUR per TO (0.06 EUR per KG)
    Now if you create SO for the Finished product of 10 PC
    the Char values will be
    OIL_QTY1  = 0.00022 TO (inferred from Variant table th proc)
    SO_QTY    = 10
    SO_OIL_QTY = 0.0022 TO
    Get into conditions tab
    Here Condition type ZSIG will be displayed as error with Amount 60 EUR per TO and condition value will be blank. Just enter value 1 in the col NumC and CCon fields.
    Now the Condition value will appear as 1.32 EUR.
    Hope this gives some more clarity
    Regards
    Brahmaji D

  • Condition Type Values are in display mode during PO amendment

    Dear Friends,
    I have this issue in import PO.
    1. Process is we created an import PO with all necessary values filled under respective condition types to arrive at assessable value but Local freight cost is not known at this point since values are made clearer only after complete clearance of the goods from customs..
    2.MIRO for customs done
    3. PO amendment needs to be done to fill the values for the local freight & clearing but these condition types are in display mode.
    Pls kindly guide me as to what should be done in this case?
    thanks
    nandu

    Hi,
    Once you done the MIRO for customs duty, then all the Planned delivery costs will be captured during this MIRO, the condition type will be in display mode in PO.
    if you want to amend the PO with local frieght is either you need to reverse the MIRO captured otherwise you need to add the unplanned delivery costs during the MIRO for second time & can pay the same to the Local frieght vendors.
    rgds
    gsc

  • Header condition type value not displayed in sales order output

    Hi gurus,
    I have observed a strange issue regarding a header condition in a sales order.
    we have a set up like following:
    1. If the Header condition XXXX is used in sales Order then this value should be printed on sales order output.
    2. If the Header condition mentioned in above point is not maintained in sales order it should print the total price of all line items.
    Though i have maintained the header condition value in Sales Order Header its not displayed in SO output.
    That is , I have a sales order and it has one HEADER condition type entered with 3500 USD.
    In fact this value is used for some business purpose and is being printed on the sales order output for a specific output type.
    But where as in a sales order this header condition value is not getting printed on the output though I am using same data as of the sales order which is having the header condition value printed on its output.
    According to business,we must have the header condition value printed on  sales Order output.
    Please suggest how to proceed.
    Thanks in advance.

    Not sure if you are using costom smartform to print invoice, if yes then ask developer to debug and find the root cause and fix it.
    You might need to give him condition when it shuld be printed and when not.
    You can take reference of another output type for which it is printing

Maybe you are looking for