JMS Adapter Maximum Message Size Restriction and Impact

Hi ,
We have business requirements,where the Maximum message size that needs
to be sent or received from around 25 to 30MB usig JMS XI channels.
But, "Note 856346 - J2EE JMS Adapter: Frequently Asked Questions (FAQ)"
specifies as below,
2.12)What are the message size restrictions in 640/700 release and also
710 releases?
Answer: The maximum message size for 640/700 releases is "10MB"
Please let us know,
1) If you see any issues with JMS XI Adapter handling 30MB messages in
Production systems.
2) If 30MB is huge, what is the maximum permissible message size
greater than 10MB as break point.
regards,
Amit

1) If you see any issues with JMS XI Adapter handling 30MB messages in
Production systems.
If message size beyond 10MB then the message wont come to SXMB_MONI itself.....may be even in CC monitoring there may not be an entry....you mentioned Production Systems.....did you checked in Dev? The behavior wont change from Dev to Prod.
2) If 30MB is huge, what is the maximum permissible message size
greater than 10MB as break point.
10MB itself is the limit...anything above that wont be processed.
Regards,
Abhishek.

Similar Messages

Maximum message size in AS/JMS?

Is there a maximum message size that the Oracle 10G AS JMS provider can handle? It works fine with 63-64KB message sizes, but if I send anything larger it rejects the message.
I'm pretty sure there's a way to adjust this limit, but I cannot find it.

It doesn't seem to throw an error message - at least not in the logs that I have searched through -but rather simply rejects the message. Everything works properly if the message is trimmed to fit the 64K limit.
The message recieved by the java application:
javax.jms.JMSException: JMSRemoteServer[server1:3701]: remote server is closed
at com.evermind.server.jms.JMSUtils.toJMSException(JMSUtils.java:1853)
at com.evermind.server.jms.JMSRemoteServer.assertOpen(JMSRemoteServer.java:691)
at com.evermind.server.jms.JMSRemoteServer.assertOk(JMSRemoteServer.java:700)
at com.evermind.server.jms.JMSRemoteServer.enqMessage(JMSRemoteServer.java:614)
at com.evermind.server.jms.EvermindSession.send(EvermindSession.java:1098)
at com.evermind.server.jms.EvermindMessageProducer.send(EvermindMessageProducer.java:409)
at com.evermind.server.jms.EvermindMessageProducer.send(EvermindMessageProducer.java:201)

Maximum message size for internal users

Hi,
Is it possible to configure a maximum message size for internal users and also create exceptions?
The templates available in Transport Rules only allow for "when size of any attachment is greater or equal". This is not ideal as users can add 50 X 1MB attachaments to an email etc.
Configuring Transport settings or Receive Connectors do not allow for exceptions.
Thank you.

Hi Prakash,
Thanks for the link to the thread. The AD site link configuration is valid but does not account for the required exceptions. E.g User A can send unlimited size message to User B but not to User C.
The thread also mentions the Transport Rule configuration stated in my original post but that configuration has one major flaw. Users can circumvent the control by splitting attachments.

Maximum Message Size

Hi,
          I have had to increase the Maximum Message Size on each of several weblogic server instances from 10,000,000 bytes to 30,000,000 bytes. The upper limit for this value is 2,000,000,000 bytes.
          What are the performance implications for the other server instances when this field limit is increased?
          Does anyone have a recommended initial value for this?
          Any help would be greatly appreciated.
          Thanks.

Hi,
          This maximum message size helps guard against a denial of service attack in which a caller attempts to force the server to allocate more memory than is available thereby keeping the server from responding quickly to other requests.
          Secure value is 10000000.
          Go through the following link and find the needfull information on this issue.
          http://e-docs.bea.com/wls/docs90/wlsmbeanref/core/index.html
          Regards
          Anilkumar kari

Extending maximum message size

I want to extend the maximum message size for a standalone client which is implemented according to the documentation. The server (9.1) is already configured for an extended message size of 20000000 via web console (environment - server - protocols - general). But I get the "weblogic.socket.MaxMessageSizeExceededException: Incoming message of size: '10000080' bytes exceeds the configured maximum of: '10000000' bytes for protocol: 't3'" independently whether I give the parameter "-Dweblogic.MaxMessageSize=20000000" (or MaxT3MessageSize) to the clients jvm or not. How can I increase the message size?

It doesn't seem to throw an error message - at least not in the logs that I have searched through -but rather simply rejects the message. Everything works properly if the message is trimmed to fit the 64K limit.
The message recieved by the java application:
javax.jms.JMSException: JMSRemoteServer[server1:3701]: remote server is closed
at com.evermind.server.jms.JMSUtils.toJMSException(JMSUtils.java:1853)
at com.evermind.server.jms.JMSRemoteServer.assertOpen(JMSRemoteServer.java:691)
at com.evermind.server.jms.JMSRemoteServer.assertOk(JMSRemoteServer.java:700)
at com.evermind.server.jms.JMSRemoteServer.enqMessage(JMSRemoteServer.java:614)
at com.evermind.server.jms.EvermindSession.send(EvermindSession.java:1098)
at com.evermind.server.jms.EvermindMessageProducer.send(EvermindMessageProducer.java:409)
at com.evermind.server.jms.EvermindMessageProducer.send(EvermindMessageProducer.java:201)

Picture resolution or message size restriction

I have an iPhone 3G and am trying to receive picture messages via MMS. I keep getting a message that says, "The media content was not included due to a picture resolution or message size restriction." Is this happening because of my iPhone or because of my cellular carrier? Is there a way to fix this? Thanks!

Alec S. wrote:
"The media content was not included due to a picture resolution or message size restriction." Is this happening because of my iPhone or because of my cellular carrier?
Your carrier.
Is there a way to fix this?
Sorry, no. All carriers/ISP have size restrictions.

Remove Message Size Restriction

Hello,
Please suggest a powershell to achieve below two tasks for bulk mailboxes (in .csv), NOT for individual mailbox;
1) To apply Message Size Restriction
2) To remove Message Size Restriction, so it will utilize default
Thanks

Hi,
I edit Johnpaul’s command to set message size limits not quotas.
To apply Message Size Restriction
Import-Csv "C:\temp\users.csv" | Foreach-object {Set-Mailbox -Identity $_.name -MaxReceiveSize 1GB –MaxSendSize 2GB}
To remove Message Size Restriction, we just set the value to unlimited.
Import-Csv "C:\temp\users.csv" | Foreach-object {Set-Mailbox -Identity $_.name -MaxReceiveSize unlimited–MaxSendSize unlimited}
By the way, message size limit can be set on the following levels:
Organizational Level
Send Connector
Receive Connector
AD Site Links
Routing Group Connectors
Individual
The path evaluated is as follows: User Send Limit > Receive Connector > Organization Checks > Send Connector > User Receive Limit
For more information, please refer to this document:
https://technet.microsoft.com/en-us/library/bb124345(v=exchg.141).aspx
Best Regards.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Lynn-Li
TechNet Community Support

552 Message size exceeds maximum message size

[Dell Inspiron 560 desktop;
MS Windows 7 Home Premium SP1 64bit; Windows Live Mail 2011; MS Word Pro 2003; Mozilla Firefox 22.0; Adobe FP 11,8,800,94; Adobe Reader 11.......]
Hello, I have the same problem, 10 emails I sent out bounced with the following same error message:
">>>xxxxxxxxxatxxxxxxxx.co.il(reading confirmation): 552 Message size exceeds maximum message size"
And they also sent the headers....which is all Greek to me. Being a very beginner computer user, I can't execute the good advice given here.
This is very strange since the emails so bounced only had 5 small pictures I had taken in my small, cheap dig camera, while other messages I had sent out
successfully before were probably 4 times as big.
Also, whose fault is it: my server RCN? Microsoft? I wonder...
I hope there's something easier for me to do to fix this problem?
Thanks ever so much for any help! :) Adela

It says to me that the message you sent was rejected along the way because it was too big. Ask the e-mail administrator of the system that's bouncing it.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Exchange 2007 send connector does nor respect Maximum message size (sometimes...)

Hi to all
We have 9 email server, 5 Mailboxes, 2 CAS and 2 HT, We began to have problems to send and receive from internet; so I checked the queues and I discovered that some users are sending messages with a size greater than 16 MB, althought internally can send
until 40MB, if they send externally, only until 16MB.
I revised all the configuration:
Organization Configuration/Hub Transport/Global Settings/ Maximum send size (KB):40960
Server Configuration/Hub Transport/HT01/Receive Connectors/Default HT01/Maximum message size(KB): 40960 (only this server can send outside, the other server is in spare)
Organization Configuration/Hub Transport/Send Connector/SendMailOuside/Maximum message size(KB) 16386
We send by an Smart host that is used only by the HT01 to a Symantec server.
With this, we have this situations:
In the queue, I see some users are sending emails with a size more than 16MB outside the organization, I revised their configuration and the "maximun send size" is clear the checkbox (just like my account), the weir is if I try to send an email
with a size more than 16MB, I got the message: "#550 5.3.4 ROUTING.SizeLimit; message size exceeds fixed maximum size for route ##", this is not sense because their account configuration is the same like mine, so the Exchange must not let
them to put the email in the queue...
If between internal users try to send an email with size more than 16MB, this is allowed and it's send without any problem
So I don't know where is the misconfiguration, is permited to send mails with size less than 40MB internally, but externally only until to 16MB, but I din't know why the Exchange system let some users to send (or at least put in the queue) this kind of messages,
my account is in the same DB like the other users...
I hope to be clear in the description of the situation, maybe a patch or some thing, the HT server has the January patch and in april will be applied the last patchs.
Doc MX

Hi DocMX,
Thank you for your question.
We could run the following command:
Get-TransportConfig | FL max*size
Then, we could check the send connector by the following command:
Get-SendConnector | FL Identity,MaxMessageSize
We could run the following command to check an individual user maximum size.
Get-Mailbox <username> | FL Name,Max*size
In my solution, we could rebuild the user profile that those users could send emails more than 16MB to check if the issue persist.
We could also restart the service of “Microsoft Exchange Transport”.
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Jim Xu
TechNet Community Support

Maximum Message size OSB can handle

Hi,
I am trying to find out the maximum message size OSB can handle without any problems.
I know this may be dependant on JVM settings etc,but what is a safe limit.Can the payload size be of 1 GB etc , say for a WSDL based proxy service.
Any formal documentation on the size of messages?
Thanks.

Hi ,
Please check the following links
https://kr.forums.oracle.com/forums/thread.jspa?threadID=2125210
https://kr.forums.oracle.com/forums/thread.jspa?threadID=2167494

Security Services \ Outbreak Filters - Maximum Message Size to Scan?

We still have the Maximum Message Size to Scan: set to 256K is that too low by today's standards?

We have our set to 1M. The only issue is that it will use more memory to scan. Other than that, no issues for us when we change it.

Restrict message size - Message Size Restrictions - New Users

Is there a way to set the message size restrictions on new mailboxes(programmatically)? I saw maybe it can be done with a mailbox plan but this doesn't seem to be a feature on exchange 2013 enterprise(internally hosted)?
Any ideas welcome
Thanks
Robbie

Hi ,
Please have a look in to the below mentioned command.
Set-Mailbox -Identity "nithya" -MaxSendSize "10 MB" -MaxReceiveSize "10 MB"
For bulk user's modification:
import-csv c:\nithya.csv | Set-Mailbox -MaxSendSize "10 MB" -MaxReceiveSize "10 MB"
CSV header image :
Reference link :
http://exchangeshare.wordpress.com/2008/04/24/exchange-2007-where-to-set-message-mail-size-limit/
http://rajisubramanian.wordpress.com/2014/01/26/exchange-server-2013-message-size-configuration-detail/
Note : First link is for exchange 2007 though the concept is same for exchange 2013.
Thanks & Regards S.Nithyanandham

Maximum message size JMS adapter can pick

Dear All,
I have query on JMS adapters.
1) I would like to know what is the maximum size message JMS adapter can pick?
2) Is there any option in JMS adapter, to define the maximum size?
You help/guidance will be very much appreciated.
Thanks,
Praveenkumar

1) If you see any issues with JMS XI Adapter handling 30MB messages in
Production systems.
If message size beyond 10MB then the message wont come to SXMB_MONI itself.....may be even in CC monitoring there may not be an entry....you mentioned Production Systems.....did you checked in Dev? The behavior wont change from Dev to Prod.
2) If 30MB is huge, what is the maximum permissible message size
greater than 10MB as break point.
10MB itself is the limit...anything above that wont be processed.
Regards,
Abhishek.

Restrict maximum message size like on other phones?

Hi,
just found out that the mail application on the iPhone always downloads the full content of a message when its size is below 50KB. If, however, the message size is 50KB or more, the iPhone only seems to download it when the message is accessed by the user. I've just tested this the following way:
1. Sent two mails via Exchange ActiveSync to the phone, one with a size of 47KB, another with a size of 52KB.
2. Turned on airplane mode
3. In mail, the message with a size of 47KB could opened and views as it was completely downloaded. While opening the 52KB message I however received a note that message cannot be viewed as it hasn't been downloaded yet.
So, at least when using Exchange ActiveSync (haven't tested other protocols) the maximum size of automatically pushed messages seems to be 50KB.
Do you know whether there is a possibilty to restrict this size? Since when using the iPhone in another country 50KB per mail could be quite expensive compared to other Phones that allow you to restrict the size of the content being automatically downloaded (i.e. Windows Mobile where you can choose or Mail for Exchange on Symbian where only 2KB of each message are downloaded automatically).
I wish there was an option for it. Would be nice to see this at some stage in software 3.0.
Thanks
luke
Message was edited by: lukin22

Long question, short answer.... you can't adjust how the iPhone decides to download the full content of an email. That feature has not been mentioned for 3.0.

JDBC Message size restriction

Hi All,
Has any one used JDBC sender adapter message size restrction parameters which are specified in note 1253826?
I have configured below 3 parameters as per note but its not working.
msgLimit = true
maxMsgSize = 10240
maxRowSize = 2
As per my configuration, I see 1 record size is 2 KB hence maxRowSize = 2. I am allowing max 10MB load to come in so maxMsgSize value as 10240. but even for 1 record I am getting error as ERROR_MAX_MSG_SIZE_REACHED which is not expected.
Please let me know if some one has used above parameters successfully.
Thanks in advance.
Regards
Sushil

Hi Sushil
Use this concept.
Its very simple if you know the SQL or oracle.
Whatever is you database just apply TOP query in your select query and update query in your sender JDBC adapter.
If you dont know the query just search in google.
What TOP Query do:
for example ( SQL Server ) i have to pic only 10000 records from the 50000 records present in table.
Here i will apply ---
Select TOP 10000 fieldName1, fieldName2 from TableName where clause...
Update TOP(10000) TableName set fieldName1='1' where clause...
Use this query and your problem will be solved.
Please dont forget to make it Transaction Level Isolation = serializable (under Advanced --> Additional Parameters in your sender Communication channel)
Hope so it will solve your problem.
Regards
Dheeraj Kumar

JMS Adapter Maximum Message Size Restriction and Impact

Similar Messages

Maybe you are looking for