JMS Adapter not picking file in PI7.0

Hello,
I am working jms to jms scenario on PI7.0 Service Pack13. file is not able to pick up sendar JMS Channel. I am using WebSphereMQ Transport Protocol. JMS drivers are installed. ports and protocals are correct.
I checked all parameters of JMS Adapter. no mistake in parameters. What is the problem. Please suggest as soon as possible.
Thanks
venkat

Hi San ,
Please checke the status of JMS communication channel. In Runtime work bench , U will get the adapter monitoring there if any activity happens it shows the event details .
I hope picking the file is initial event so you can get some idea with those event log for Communication channel .
Cheers,
Reddy

Similar Messages

JMS adapter not picking the file

Hello,
I am working jms to jms scenario on PI7.0 Service Pack13. file is not able to pick up sendar JMS Channel. I am using WebSphereMQ Transport Protocol. JMS drivers are installed.
I checked all parameters of JMS Adapter. no mistake in parameters. What is the problem. Please suggest as soon as possible.
Thanks

Hi,
Whether the Driver file has been mentioned in Provider XML file and check the messages are in the right sender Queue.
Check the Port and Protocol are right one.
Regards
Agasthuri Doss

FTP adapter not picking files

Hi
I trying to get files from a remote FTP server
but the FTP adapter configured is not able to pick up files from the remote folder
using
soa 11.1.1.3
filezilla as FTP server
+<Sep 5, 2011 5:32:56 PM GMT+05:30> <Error> <oracle.soa.b2b.transport> <BEA-00000+
+0> <[IPT_FileRecMonitorError] Error in ftp or file receiver monitor.>+
FINE: Ftp Adapter FTPManagedConnectionFactory::getPasswordCredential using mcf
for credentials
FINE: Ftp Adapter Managed Connection Created
FINE: Ftp Adapter Adding Event Listener
FINE: Ftp Adapter Connection Created
+FINE: Ftp Adapter Using locale=[null] for ftp server+
+FINE: Ftp Adapter FtpTimestampParserImpl::parseTimestamp returned [Wed Aug 31 1+
+9:40:00 GMT+05:30 2011] for [Aug 31 19:40], time offset=[0]+
+FINE: Ftp Adapter Using locale=[null] for ftp server+
+FINE: Ftp Adapter FtpTimestampParserImpl::parseTimestamp returned [Fri Sep 02 1+
+8:23:00 GMT+05:30 2011] for [Sep 02 18:23], time offset=[0]+
+FINE: Ftp Adapter Using locale=[null] for ftp server+
+FINE: Ftp Adapter FtpTimestampParserImpl::parseTimestamp returned [Fri Sep 02 1+
+8:33:00 GMT+05:30 2011] for [Sep 02 18:33], time offset=[0]+
+FINE: Ftp Adapter Using locale=[null] for ftp server+
+FINE: Ftp Adapter FtpTimestampParserImpl::parseTimestamp returned [Mon Sep 05 1+
+3:13:00 GMT+05:30 2011] for [Sep 05 13:13], time offset=[0]+
+FINE: Ftp Adapter Using locale=[null] for ftp server+
+FINE: Ftp Adapter FtpTimestampParserImpl::parseTimestamp returned [Mon Sep 05 1+
+3:45:00 GMT+05:30 2011] for [Sep 05 13:45], time offset=[0]+
FINE: Ftp Adapter Sending event: 1 with: oracle.tip.adapter.ftp.FTPConnection@8
+68852+
can someone help me on this
-Regards
adiKsystime

Hey Naresh
thanks for your earlier reply
but I have no luck yet
soa_server logs show
FINE: Ftp Adapter Clearing Event Listeners
FINE: Ftp Adapter FTPManagedConnectionFactory::getPasswordCredential using apps
erver credentials
FINE: Ftp Adapter Managed Connection Created
FINE: Ftp Adapter Adding Event Listener
FINE: Ftp Adapter Connection Created
FINE: Ftp Adapter Sending event: 1 with: oracle.tip.adapter.ftp.FTPConnection@1
+47dc09+
FINE: Ftp Adapter The candidate set size in matchManagedConnection [1]
FINE: Ftp Adapter FTPManagedConnectionFactory::getPasswordCredential using apps
erver credentials
FINE: Ftp Adapter Connection Created
FINE: Ftp Adapter Sending event: 1 with: oracle.tip.adapter.ftp.FTPConnection@1
d469b0
FINE: Ftp Adapter The candidate set size in matchManagedConnection [1]
FINE: Ftp Adapter FTPManagedConnectionFactory::getPasswordCredential using apps
erver credentials
FINE: Ftp Adapter Connection Created
FINE: Ftp Adapter Sending event: 1 with: oracle.tip.adapter.ftp.FTPConnection@1
+040f85+
FINE: Ftp Adapter FTPManagedConnection::destroy called, closing physical socket
and No luck yet in picking up the remote files
regards
adiKsystime

Maximum message size JMS adapter can pick

Dear All,
I have query on JMS adapters.
1) I would like to know what is the maximum size message JMS adapter can pick?
2) Is there any option in JMS adapter, to define the maximum size?
You help/guidance will be very much appreciated.
Thanks,
Praveenkumar

1) If you see any issues with JMS XI Adapter handling 30MB messages in
Production systems.
If message size beyond 10MB then the message wont come to SXMB_MONI itself.....may be even in CC monitoring there may not be an entry....you mentioned Production Systems.....did you checked in Dev? The behavior wont change from Dev to Prod.
2) If 30MB is huge, what is the maximum permissible message size
greater than 10MB as break point.
10MB itself is the limit...anything above that wont be processed.
Regards,
Abhishek.

JMS Adapter not appearing in Adapter Monitor, How to Fix ?

JMS Adapter not appearing in Adapter Monitor screen when choosing "Only Installed and Started Adapters" option. What need to do to install and start the JMS adapter.
Thanks in advance

Hi,
Only JMS adapter is not seen in the adapter monitor or other adapters are not listed in the same.
Have you checked whether the JMS drivers are installed on XI or not?
First would be to deploy drivers for JMS scenarios - https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3867a582-0401-0010-6cbf-9644e49f1a10
Thnx
Chirag

NFS Adapter not picking up file

Hi Guru's,
Scenario is File(NFS) to File(FTP) without using repository part.
The NFS directory name has been maintained correctly. File name is also correct. Channel is active. Checked in RWB also.
All configuration settings are fine. But NFS adapter is not picking up the file and also not showing any error.
Tried following thing but not working
1) Manually deactivating and activating channel in Directory.
2) Stop start channel in Communication channel monitoring.
3) Put exact file name in Communication channel.
4) Testing mode changed from Delete to Test and again test to delete.
5) File type binary to text.

Hello,
Verify the below mentioned points:
a. Is the file adapter locked? ....Visual Admin (till PI7.0) or NWA(for PI7.1 and above) . Entry comes as $XIAdapter*
b. Check permission / authorization to read/ delete the file?
c. Adapter Services are active
-Rahul

Sender File adapter not picking the file ABCD.PRN extension file

Hi
Am doing File to Abap Proxy scenario. My source will be in text format of fixed length of fileds 7.
My souce file will be generated by a third party machine with the extension EEE150809.PRN. In my scenario my file adapter should pick the file and update the same in ECC via a Proxy.
I have configured the Sender File adapter with Message Protocol - Content Conversion but file adapter is not picking the file. I have checked the Communication channel and status is fine. But the same Communication Channel works for .XML file.
What are the parameters that I have to consider with the file extension .PRN using File adapter?
Thanks.
S.

Hi Swarna,
You dont need to worry about the extension when picking the file. You can try using EEE* so that is picks all the files starting with EEE. If you have the fixed name then you can try giving EEE150809.*. Also EEE150809.PRN should not have any issue. Try to see in sender commu ication cahnnel for anyerrors. Probably there might be some network issues or authorisation issues. If you are reading with NFS then ask them to give necessary permissions. If you are reading through FTP check the user id and pwd you are using.
Regards,
---Satish

File Adapter Not picking the files

Hi All,
We have a process wherein the file adapter picks up the file from a particular location and it processed thereafter. We get the files once every month. We noticed that if the files that are being dazzled are of the same, i.e if the same nomenclature is there for the file that was dazzled the previous month, the adapter does not pick up the file. Only after renaming the file, it picks the file and processed them.
Any idea why the files that are dazzled with the same name are not being picked up.
Thanks in Advance...!!

Hi,
While configuring file adapter to pick up the files cross verify with file name putting in the directory location against the
"Includes files with name pattern" "Excludes file with name pattern" file name..
let say if u kept .*txt if picks the files txt with any name and one more think once after picking up the file from particular location are u enabling (delete file once read) option in configuration(It all depends on ur req)..
cross check the schema element of the file pattern.

File Adapter not picking the file

Hi Experts,
I am trying to create a Legacy-XI-R/3 scenario. I am using a file adapter as the sender communication channel and a ABAP proxy at the receiver end. I have given the path of my input file in the legacy system, but the file is not picked up by the adapter. Can any one tell me where I might have gone wrong?

Hi,
Just want to add one more suggestion.
Check the Host name, where the File is kept and try to use the directory path as
<HostName>\<DirName>.
Hope this help.
Aj.

SAP MDM Adapter not picking up files in Ready folder on MDM

Hello Experts,
We are sending master data from MDM 7.1 system via PI 7.1 system to SAP ECC system. The Sydnication from MDM system is automatic and the files are being syndicated successfully from MDM system and getting dumped in the Ready folder of the port.
But the Sender MDM PI adapter is not picking up the files from the folder.
The communication channel status in Communication channel monitoring is green and 'data control' is Automatically.
However the file is getting picked up if we stop and then start the channel but not automatically.
Please Help!
Thanks,
Suraj

Check if there are locks for the file channel in NWA. If yes, unlock that and your issue should be resolved.
Login to NWA --> Operation Management --> Systems --> Start & Stop --> JAVA EE Services --> check for File Connector, Locking Adapter and XPI Adapter: File.

Soap Adapter not Picking up files from sender

Hello All,
I have configured a SOAP Adapter and started it. When i place a file in the appropriate directory, it is not getting picked up. Are there any reasons this could happen ?
I would really appreaciate it if someone can help me with this !!!
Below is the log:
17:26:27 (3812): Enabling service ToWS
17:26:27 (3812): Enabling service FromWS
17:26:27 (3823): SOAP adapter initialized
17:26:27 (3830): Starting the server at 8660:/XIservices/MXS/xmb
17:26:27 (3830): Starting the server at 4444:/XIservices/MXS/ws
17:26:27 (3807): SOAP adapter started
Below is part of the config file:
The port and path where the adapter waits for web service messages from clients.
XMBWS.WSPort=4444
XMBWS.WSPath=/XIservices/MXS/ws
XMB.SenderBusinessSystem=WLX_100
#XMB.ReceiverBusinessSystem=MD1_400
XMB.User=XIAPPLUSER
XMB.Password=********
XMB.Client =100
XMB.Language=EN
XMB.SenderInterfaceNamespace=http://xi.sap.com/wlx
XMB.ReceiverInterfaceNamespace=urn:sap-com:document:sap:idoc:messages
XMB.SenderInterfaceName=ProcesseFT
XMB.ReceiverInterfaceName=Z_SERVICE_ENTRY.ZSERVICEENTRY01
XMB.TraceLevel=0
XMB.LoggingLevel=0
XMB.QualityOfService=EO
XMB.ContentType=text/xml

Hi,
If you are using a Stand-alone J2SE Adapter Engine, you can create a SOAP adapter to pick a SOAP message from a file system and send it to the Integration Server. This is available with the XI3.0.
The configuration will look like this.
Bubble adapter java class
classname=com.sap.aii.messaging.adapter.ModuleBubble
This adapter instantiates a bubble bag for supporting
a soap file upload and sender. A bubble bag is a collection of Bubble
instances that form some processing chain of message objects.
Below parameter Bubble.Helper specifies the helper class that implements
the ModuleBubbleHelper interface. This class is used to instantiate
a bubble bag for this adapter.
Sets the bubble module helper that can instantiate your bubble bag
Bubble.Helper=com.sap.aii.messaging.adapter.ModuleBubbleHelperSOAPFileSenderImpl
#$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
Below this line are the parameters specific to the ModuleBubbleHelperSOAPFileSenderImpl
#$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
This module loads files from the local file system, consruct SOAP messages
(or SOAP with Attachments messages), and send them to the specified Web Service target URL.
Upon successful completion, response messages are stored in the file system.
Files stored can represent a plain payload, a SOAP envelope, or a SOAP with Attachments.
Plain payload files and SOAP envelope files may be packaged in MIME using some MIME headers.
SOAP with Attachments files must be packaged in MIME.
Specifies the type of the file. The available values are:
plain for plain; soap for soap envelope; swa for soap with attachments
SFSender.ContentMode=soap
Specifies the packaging
true for MIME packaged file; false for bare content
SFSender.MIMEPackaged=true
log everything (4-digit binary, where the bits indicate which
information is logged: req message, req context, resp request, resp context)
SFSender.Log=1111
The target URL to which messages are sent.
SFSender.TargetURL=http://p28848:4040/mysoaphandler
The upload directory on the local file system
This directory has six sub directories with names 0, 1, 2, 3, 4, 5, and 6. (they will be created)
The meaning of each sub directories are:
0 = inbox where you place messages to be sent
1 = trash box
2 = work box
3 = successfully completed (original) messages go in
4 = response messages come in (if any)
5 = undelivered (original) messages go in
6 = error messages come in (if any)
In these directories, the file names are used as key and there can be only one file with
the same name except in the trash box. So, when you place in the inbox a file with
the name identical to one of the files stored in another directory, it will not processed.
SFSender.Directory=/tmp/sfsender
The polling interval in milliseconds (default is 5000)
#SFSender.PollingInterval=5000
The retry delay after each failure in milliseconds (default is 5000)
#SFSender.RetryDelay=5000
The maximal retry count upon failures (default is 3)
After the maximal retry count is reached, the message is moved as undelivered.
#SFSender.RetryCount=3
The number of dispatchers to send requests (default is 3)
SFSender.DispatcherCount=1
END
Hope this helps.
@Ravi: You may call me at +91 9844167672.
Warm regards,
Venki.

FTP-adapter not picking all files

Hi,
We have scenario, where FTP should pick a file and post it as a idoc to SAP. Now it happens that FTP pick's some files and leaves some out.
The parameters are:
File name = *
Connection mode = Per file transfer
Quality of service = Exactly once
Poll interval (secs) = 3000
If I look at the adapter monitoring the last polling interval was done yesterday morning. How's that possible if interval is 3000 seconds?

Hi Tapio,
We also faced the same problem but it was with NFS protocol. Can you pls check with the help of your System Administrator, after putting some more new files into the relevant folder and see what all are the privileges that is coming to each file and also the user group its saying for the files, especially the ones which are not picked.
There is a chance that the one which is not picked can be of a different user group and your FTP user is belonging to different user group.
We are in XI 3.0 SP15..
Pls check the same.
Cheers
JK

File Adapter not processing Files which has COMMA in it

Hi Experts,
I am working on Project in SOA 11.1.1.6.
I am trying to process a file which has comma in it. for eg - XXXXXXX-XX_XX_XXX11,99.pdf
I am picking the file using file adapter from SOURCE directory and using another file adapter to WRITE to destination directory. Polling processing is working fine.
I am picking the file from SOURCE directory as ATTACHMENT and WRITING to DESTINATION folder through File Adapter
While doing file WRITE its failing. While reading the file the values of Content Type, Character Set and Encoding are NULL for the ATTACHMENT as they are optional properties.
The error I am getting while File WRITE is
<remoteFault>
<part name="summary">
<summary>java.lang.RuntimeException: Failed to decode properties string att.encoding=null,att.charset=null,att.contentId=AReadFile/XXXXXXXX_XX_XXX11,99.pdf_1352184009640,att.contentType=null,att.partName=attach</summary>
</part>
<part name="detail">
<detail>1</detail>
</part>
</remoteFault>

Comma is usually treated as a separator/delimiter and hence it is not really common to have comma in filename. I think because of this reason File adapter does not support it (have to cross-verify). If you really have a requirement to read/write files with comma in filename then better log a SR with Oracle support.
Regards,
Anuj

AQ adapter not picking up message...

I have a schema called AQAPP with one table based queue named: out_queue. Using a PL/SQL procedure, enqueued one message with data in XML format. I see the information in the table after executing the stored procedure.
In iStudio created a business object based on the DTD file. Created one application called AQApp that publishes a createCustomer event. In the deploy screen, entered the name of the queue: out_queue.
Started the AQ adapter. The messages displayed show that there are zero messages in the queue, when I can see in OEM that there is 1 message in READY state. Can someone tell me if I'm missing something?
Here's the output from the adapter. As you can see, the correct queue name is displayed.
This schema is in a 9.2.0.4.0 database on a W2K platform. I also applied the Patch 9 to this database.
============================================
Fri Feb 11 12:56:30 CST 2005: The Adapter service is starting..
Fri Feb 11 12:56:30 CST 2005: Registering your application (AQAPP)..
Fri Feb 11 12:56:31 CST 2005: Messenger: Done initializing.
Fri Feb 11 12:56:31 CST 2005: AO Persistence: : Initialization started.
Fri Feb 11 12:56:31 CST 2005: Persistence_PerformingStep-1
Fri Feb 11 12:56:31 CST 2005: AO Persistence: : No clean up necessary.
Fri Feb 11 12:56:31 CST 2005: Persistence_DoneWithCleanup
Fri Feb 11 12:56:31 CST 2005: Persistence_PerformingStep-1
Fri Feb 11 12:56:31 CST 2005: AO Persistence: : Clean up started.
Fri Feb 11 12:56:31 CST 2005: Persistence_PerformingStep-2
Fri Feb 11 12:56:31 CST 2005: Persistence_PerformingStep-3
Fri Feb 11 12:56:31 CST 2005: Persistence_PerformingStep-4
Fri Feb 11 12:56:31 CST 2005: Persistence_PerformingStep-5
Fri Feb 11 12:56:31 CST 2005: AO Persistence: : Finishing clean up (in final phase).
Fri Feb 11 12:56:31 CST 2005: Persistence_PerformingStep-6
Fri Feb 11 12:56:31 CST 2005: Persistence_DoneWithCleanup
Fri Feb 11 12:56:31 CST 2005: AO Persistence: : No backed-up messages, so Queue Replenisher thread not needed.
Fri Feb 11 12:56:31 CST 2005: AO Persistence: : Initialization complete.
Fri Feb 11 12:56:31 CST 2005: CO Persistence: : Initialization started.
Fri Feb 11 12:56:31 CST 2005: Persistence_PerformingStep-1
Fri Feb 11 12:56:31 CST 2005: CO Persistence: : No clean up necessary.
Fri Feb 11 12:56:31 CST 2005: Persistence_DoneWithCleanup
Fri Feb 11 12:56:31 CST 2005: Persistence_PerformingStep-1
Fri Feb 11 12:56:31 CST 2005: CO Persistence: : Clean up started.
Fri Feb 11 12:56:31 CST 2005: Persistence_PerformingStep-2
Fri Feb 11 12:56:31 CST 2005: Persistence_PerformingStep-3
Fri Feb 11 12:56:31 CST 2005: Persistence_PerformingStep-4
Fri Feb 11 12:56:31 CST 2005: Persistence_PerformingStep-5
Fri Feb 11 12:56:31 CST 2005: CO Persistence: : Finishing clean up (in final phase).
Fri Feb 11 12:56:32 CST 2005: Persistence_PerformingStep-6
Fri Feb 11 12:56:32 CST 2005: Persistence_DoneWithCleanup
Fri Feb 11 12:56:32 CST 2005: CO Persistence: : No backed-up messages, so Queue Replenisher thread not needed.
Fri Feb 11 12:56:32 CST 2005: CO Persistence: : Initialization complete.
Fri Feb 11 12:56:32 CST 2005: MessageResubmitter_readerCreated
Fri Feb 11 12:56:32 CST 2005: MessageResubmitter_doneInitializing
Fri Feb 11 12:56:32 CST 2005: AO Persistence: : Enable forwarding invoked.
Fri Feb 11 12:56:32 CST 2005: AO Persistence: # of messages backed up: 0
Fri Feb 11 12:56:32 CST 2005: AO Persistence: : No backed-up messages, so Queue Replenisher thread not needed.
Fri Feb 11 12:56:32 CST 2005: AO Persistence: : Enable forwarding done.
Fri Feb 11 12:56:32 CST 2005: Initializing the Bridge oracle.oai.agent.adapter.aq.XMLAQBridge..
Fri Feb 11 12:56:33 CST 2005: Initializing connection to the Repository...
Fri Feb 11 12:56:33 CST 2005: Connected to the Repository.
Fri Feb 11 12:56:35 CST 2005: AQ Adapter: created a reader for queue OUT_QUEUE.
Fri Feb 11 12:56:35 CST 2005: Starting the Bridge oracle.oai.agent.adapter.aq.XMLAQBridge..
Fri Feb 11 12:56:35 CST 2005: CO Persistence: : Enable forwarding invoked.
Fri Feb 11 12:56:35 CST 2005: CO Persistence: # of messages backed up: 0
Fri Feb 11 12:56:35 CST 2005: CO Persistence: : No backed-up messages, so Queue Replenisher thread not needed.
Fri Feb 11 12:56:35 CST 2005: CO Persistence: : Enable forwarding done.
Fri Feb 11 12:56:35 CST 2005: Service started successfully.
Fri Feb 11 12:57:32 CST 2005: Persistence_PerformingStep-1
Fri Feb 11 12:57:32 CST 2005: AO Persistence: : No clean up necessary.
Fri Feb 11 12:57:32 CST 2005: Persistence_DoneWithCleanup
==========================================
Thanks in advance.
Manoj

Hi,
1) Can you activate the JMS adapter again ( edit save and activate it )
2) Check whether the right Queue is addressed.
Regards
Agasthuri Doss

File adapter not reading file suddenly

Hi,
My File to IDOC scenario was working properly. Suddenly the file adapter is not picking the file from the location. I have not changed any code. I checked all users, are in unlocked mode only. The log file throws error. Let me know any solution to resolve this
========
1.5#001A4B4C508E007400000577000019F40004558D5E8AFB9D#1219965571787#/Applications/ExchangeInfrastructure/AdapterFramework/Services/Trex##com.sap.aii.af.service.trex.impl.Util.Util: getIndex()#J2EE_GUEST#0####02305f1074b511ddaa1a001a4b4c508e#SAPEngine_Application_Thread[impl:3]_27##0#0#Error#1#com.sap.aii.af.service.trex.impl.Util#Java###SLDException couldn't get the SLD instance name. Therefore the index ID couldn't be inititialized. - Message: ; To-String: .#2#Could not read SLD instance name, due to: undefSldAccessor#com.sap.aii.af.service.sld.SLDException: Could not read SLD instance name, due to: undefSldAccessor#
#1.5#001A4B4C508E007400000579000019F40004558D5E8AFCB3#1219965571787#/Applications/ExchangeInfrastructure/AdapterFramework/Services/Trex##com.sap.aii.af.service.trex.TrexManager.TrexManager: getTrexConfiguration()#J2EE_GUEST#0####02305f1074b511ddaa1a001a4b4c508e#SAPEngine_Application_Thread[impl:3]_27##0#0#Error#1#com.sap.aii.af.service.trex.TrexManager#Java###TrexException: thrown by any problem related to the DataAccess: Message: .#1#Class: com.sap.aii.af.service.trex.TrexException : SLDException in Method: Util: getIndex(). Couldn't get the SLD instance name. Therefore the index ID couldn't be inititialized. - Message: Could not read SLD instance name, due to: undefSldAccessor; To-String: com.sap.aii.af.service.sld.SLDException: Could not read SLD instance name, due to: undefSldAccessor#
#1.5#001A4B4C508E00740000057B000019F40004558D5E8AFDE1#1219965571787#/Applications/ExchangeInfrastructure/AdapterFramework/Services/Trex##com.sap.aii.af.service.trex.TrexScheduler.TrexScheduler: run()#J2EE_GUEST#0####02305f1074b511ddaa1a001a4b4c508e#SAPEngine_Application_Thread[impl:3]_27##0#0#Error#1#com.sap.aii.af.service.trex.TrexScheduler#Java###TrexException: thrown by any problem related to the Trex processing. Message: .#1#Class: com.sap.aii.af.service.trex.TrexException : TrexException in Method: TrexManager: getTrexConfiguration(). Thrown by any problem related to the DataAccess. Message: Class: com.sap.aii.af.service.trex.TrexException : SLDException in Method: Util: getIndex(). Couldn't get the SLD instance name. Therefore the index ID couldn't be inititialized. - Message: Could not read SLD instance name, due to: undefSldAccessor; To-String: com.sap.aii.af.service.sld.SLDException: Could not read SLD instance name, due to: undefSldAccessor#
========

Hi,
1)Stop and start the Communication Channels.
2) Activate the scenario.
3) If u r using FTP may be ur credentials wereexpired.check the credentials.
"Award Points if helpful"
Regards,
jayasimha

JMS Adapter not picking file in PI7.0

Similar Messages

Maybe you are looking for