JMS (bea 9) redelivery does not work ?

I'm a bit at a loss. Any help is therefore welcome.
I am using Bea 9 and Java 1.5.
I have a MDB bean that attempts to transmit data to a foreign site via ftp. When it fails to transmit files, it errors and the message's content (a file) that I attempted to send to remote system is rollbacked. I have set the redelivery count to -1 and the redelivery delay to 1 minute. After a minute, the message is replayed and this as long as the bean is unable to transfer the file. This is what I wanted to do. And all is fine.
But...
If I stop the server while messages are waiting to be redelivered and then launch again the server just after, then the server only replays 2 or 3 messages (or 2 or 3 times the same message) and then stop replaying messages which should be redelivered every minute. New messages sent to the bean are also not presented to the bean. Everything seems frozen as far as this bean is concerned..
But, if I look at the console and display the monitoring info of this MDB after a restart, I read :
Beans In Use Count 0
Waiter Current Count 0
Timeout Total Count     0
Access Total Count     2
Destroyed Total Count     2
Connection Status Connected
Destination FtpQueue
JMS Client ID
Status running
Last Exception      java.lang.Error: com.mycompany.FtpException: Could not connect to server ftpsrv2
It is "running"...
Any ideas ?
Thanks in advance for any tips.
P.Z.

Hi,
Redelivery delays themselves are not persisted - messages that are subject to a redelivery delay should be immediately redelivered if their host JMS server is shutdown and restarted.
MDBs that are causing rollbacks/recovers have a built in pause/retry algorithm that causes them to automatically shutdown after a certain number of failures and then restart after an interval. The purpose is to prevent failing MDBs from running in a tight loop. The MDB edocs provide a bit more detail.
If this doesn't help, I have some questions that might help narrow down the problem:
-- Are the messages persistent?
-- Is the JMS server running on the same server as the MDB? If not, which server are you stopping?
-- How are you stopping the server?
-- What do the pending and current counts look like on the destination?
-- Are you using the "unit-of-order" feature?
Tom Barnes
WebLogic Messaging Developer Team

Similar Messages

Configuration Template Builder WL8.1 does not work

Hello,
     After spending nearly 2 days now trying to get a Configuration Template
built, I've concluded this simply does not work. Has anyone used the
Config Template builder to package a semi-complex application on top of WLI?
     I'm trying to have 2 of my applications, the JMS and JDBC resources,
and a WLI event generator packaged up for easy deployment to someone
else's server configuration. The problem with this is that there are
required resources for WLI, namely a database. The Pointbase database
included for WLI does not get included in the template automatically.
There are also some flat-out bugs:
If you choose to include a resource adapter "application", such as
jms-xa-adp.rar, the template builder does not bundle this in the
template and deploy it correctly. The template builder restricts you to
putting applications in the relative path starting at ./
For jms-xa-adp.rar, its original location is in $WL_HOME/server/lib, and
the template builder defaults to put it in ./lib of your template.
However, when you create a domain with the template, jms-xa-adp.rar does
not get placed in your ./lib directory. This causes you to then go and
manually edit your config.xml to point back at $WL_HOME/server/lib or to
manually copy jms-xa-adp.rar into your ./lib directory (which the
template mechanism should do for you).
Relative paths in the config.xml file require you to execute the config
builder from the directory of the domain you are making a template for.
The template builder should instead be smart enough to realize that
relative paths in the config.xml file are relative to the directory that
the config.xml is in, not the one you are running the template builder
from. You'll get an error when trying to create the template cause it
won't find the resources if you're not in that directory.
If anyone has successfully used this to package a WLI application in a
template, please share your experiences and how to do so. In the
meantime, I'm claiming there is no way to nicely package up a server
configuration for a WLI app in Weblogic, and this is a big shortcoming.
Weblogic needs a simple transferrable way of creating server
configurations (it tries to do this with the template, but that is
failing). With JBoss, for example, you simply copy your server directory
into another installation. This doesn't work with Weblogic unfortunately
because it puts hard-coded paths in the config.xml file.
Thanks

Russ,
     Thank you for the detailed responses. The only one I'm currently
struggling with still is the #5, with the scripts between the two. One
of the major benefits of using a J2EE App Server is supposed to be the
portability between servers. I find it disconcerting that BEA Weblogic
restricts me to the platform I created the domain on by creating
platform-specific startup/shutdown scripts for only the platform created
on. It's understandable that a script converter would be difficult, but
at least both the .sh/.cmd files should be created from the first time
you make a domain. If the user only wants one or the other, they can
delete the appropriate one. It's also understandable that the
users/deployers shouldn't have to manually convert a startup/shutdown
script to take the domain to a different box.
     JBoss clearly has BEA beat on ease of deployment here. Their model is
the concept I'm thinking of: you have some generic startup/shutdown
scripts that can load a platform-independent server configuration. You
truly can copy directories as-is between JBoss installations.
     I was hoping to package up a server domain for use on any of the
supported platforms, but since I don't have the time to manually convert
the startup/shutdown scripts, I'm going to have to tell people it's only
for Solaris now.
     Hopefully BEA can fix this in a future SP. There's no need for this
platform-dependency. Also, if the Windows version can generate both
scripts at creation time, then the Solaris should be able to do this as
well (or at least give you the option).
Thanks again for the replies
russ wrote:
Hi Steven,
I have several comments and questions about your last two posts. I will try to
address them in order.
1) "The Pointbase database included for WLI does not get included in the template
automatically."
     By default the template builder only includes the *.cmd and *.sh files in the
template from your domain directory. If you begin building with an existing
domain template all files that were in the template will get included. This was
done because there is no way for the builder to automatically determine all the
files that are required by your template/domain and we steered away from recursively
including all files from the directory so that unused files were not needlessly
included. We can extrapolate some files based on the application paths in the
config.xml, but the rest is left up to the template builder to be aware of what
is needed for their domain to run. So, if you need the Pointbase *.dbn and *.wal
files included in your template just select these files on the ?Add Files? panel
of the template builder and add them to the ?Domain Directory?.
2) ?If you choose to include a resource adapter "application", such as jms-xa-adp.rar,
the template builder does not bundle this in the template and deploy it correctly.?
     The template builder considers application files to be in two categories: Imported
or Internal. When you are at the ?Add Applications? panel of the builder you
will see a checklist of all the applications that are in the domain you selected.
On the right hand side there are two text fields. The top one displays the application
path as it is currently set in the config.xml of that domain. The bottom field
will be different depending on what category the application falls into. As you
click on each application in the list, you may notice that the bottom field may
change from an editable field titled ?Imported Application Path? to a non-editable
field titled ?Internal Application Path?. The difference between the two categories
is that an ?Imported? application?s files will be included in the template jar.
An ?Internal? application?s files will not be included in the template jar because
they are considered internal to the weblogic installation. The jms-xa-adp.rar
should fall into the internal category and should not get included in your template.
     From what you are describing it sounds like the builder attempted to import that
application when it should not have. In an attempt to recreate the problem you
are seeing I deployed that Connector Module through the WLS console and ended
up with an application path of ?C:\bea\weblogic81\server\lib? where ?C:\bea\weblogic81?
is my WL_HOME (a.k.a. USER_INSTALL_DIR). If I then attempt to build a template
from this domain, the builder recognizes this as an internal path and does not
include it inside my template. If the current application path you had looks
different from the one above, that may explain why the builder was attempting
to import it. What was the value of the ?Current Application Path? for that application
deployment?
3) ?Relative paths in the config.xml file require you to execute the config builder
from the directory of the domain you are making a template for.?
     The builder is ?smart? enough to determine relative paths. You should not have
to invoke it from the domain directory you are working with. There is a known
bug in the WebLogic Platform 8.1.1.0 release of the template builder that will
cause it to not find files with relative paths in your domain directory if the
application path in the config.xml is just a ?.?. If this is the case, you should
see a FileNotFoundException when you attempt to create the template. This will
be fixed in SP2 and you can work around this problem by changing those paths to
?./? instead. If this was not the case, what was the path the wizard choked
on?
4) ?Looking through the config file, it seems that it's all of the WLI components
that have absolute paths in the config file. In addition, BEA_WLS_DBMS_ADK has
an absolute path, not sure if that is WLI or WLS. ?
     BEA_WLS_DBMS_ADK is an integration application. If you created the original
domain using the configuration wizard most of the applications in an integration
enabled domain will reference paths inside of you installation directory or ?internal?
paths. For instance, I used the wizard to create a ?Basic WebLogic Integration
Domain?. The path for that application in this domain is: ?C:\bea\weblogic81/integration/adapters/dbms/lib/BEA_WLS_DBMS_ADK.ear?
where ?C:\bea\weblogic81? is my WL_HOME or USER_INSTALL_DIR. When I load this
domain into the builder it shows this application as ?internal? and the ?Internal
Application Path? is "$USER_INSTALL_DIR$/integration/adapters/dbms/lib/BEA_WLS_DBMS_ADK.ear".
This will be set as the path value of this application in the config.xml that
will be included in the template you build. When you later use the Configuration
Wizard on this template it will substitute the $USER_INSTALL_DIR$ to the value
of the installation directory of the machine you are creating it on.
     If you were to Change these to relative paths, as Mark previously suggested,
it will only work if you copy the domain directory to the same location relative
to your installation directory on the target machine. Also, if you copy the domain
in this manner you will more than likely run into problems with your start/stop
scripts and be forced to hand modify all the paths contained within. The configuration
wizard tries to alleviate these problems and make the configuration entirely portable.
This gives the user who creates the domain from your template the ability to
put it anywhere they want regardless of the paths in the config.xml.
5) ?However, there is another major problem with the Template Builder: it only
includes the startup/shutdown script for the platform you create the template
on. ???I built the template on Solaris with the UNIX scripts. However, I tried
to create a new config on Windows with this template, and the scripts were not
converted to .bat files!?
     As I stated previously, the builder will only include *.cmd and *.sh scripts
into your template by default. If you created the domain on a unix platform using
the configuration wizard it will not extract the *.cmd files since these aren?t
considered to be useful on unix. If you were then to attempt building a template
from this domain and take it onto a windows platform, it will obviously be missing
any windows scripts. Conversely, the wizard will extract *.sh scripts on windows
because they can still be useful if a user has an MKS or Cygwin type environment
installed. The config wizard and template builder do not have the ability to convert
scripts. The builder will only include existing scripts that are in your domain
directory and automatically determine any necessary string substitutions that
will be needed. Please note that since WebLogic is only supported on the NT/2K/XP
versions of windows you will find that the wizards use ?.cmd? files and not ?.bat?
files since these are more commonly associated with Win 95/98/ME.
     I will be happy to answer any more questions you may have and would also like
to take a look at your domain configuration to try and get a better understanding
of the problems you are encountering.
thanx,
russ

WLS6sp2 Hot deployment in cluster does not work

          I have two WLS6sp2 servers in cluster in two different machines. There is an EJB
          deployed in the cluster that works fine. Now I go to the console and I undeploy
          it: the servers show a message of "ejb undeployed". Now I activate the "deploy"
          checkbox again: the following error appears:
          weblogic.ejb20.EJBDeploymentException: Error deploying stateless EJB; nested exception
          is:
          javax.naming.NameAlreadyBoundException: Can't rebind anything but a replica-aware
          stub to a name that is currently bound to a replica-aware stub; remaining name
          javax.naming.NameAlreadyBoundException: Can't rebind anything but a replica-aware
          stub to a name that is currently bound to a replica-aware stub; remaining name
          The object is obviously clusterable (it is a stateless EJB with "home-is-clusterable=true").
          It has been deployed to the cluster target. When is working it is load balanced
          between both servers. It deploys perfectly when starting up both servers, but
          hot deployment does not work.
          This works fine when only one server is up.
          ¿Is not possible to do hot deployment in cluster?


Hm, where are you seeing the javax.naming.NameAlreadyBoundException? In one of your managed
          servers, in all of your managed server, or in your admin server?
          If you see this in your admin server, then this means you got your admin joined in the cluster,
          which is not good. Remove it from the cluster if this is so.
          Gene
          "David Agudo" <[email protected]> wrote in message news:[email protected]...
          >
          > Yes, target="mycluster".
          >
          > "Gene Chuang" <[email protected]> wrote:
          > >Did you target the ejb to the cluster, or to each individual Node in
          > >your cluster? There is a
          > >difference...
          > >
          > >Gene
          > >
          > >"David Agudo" <[email protected]> wrote in message news:[email protected]...
          > >>
          > >> I have two WLS6sp2 servers in cluster in two different machines. There
          > >is an EJB
          > >> deployed in the cluster that works fine. Now I go to the console and
          > >I undeploy
          > >> it: the servers show a message of "ejb undeployed". Now I activate
          > >the "deploy"
          > >> checkbox again: the following error appears:
          > >>
          > >> weblogic.ejb20.EJBDeploymentException: Error deploying stateless EJB;
          > >nested exception
          > >> is:
          > >> javax.naming.NameAlreadyBoundException: Can't rebind anything but a
          > >replica-aware
          > >> stub to a name that is currently bound to a replica-aware stub; remaining
          > >name
          > >> ''
          > >> javax.naming.NameAlreadyBoundException: Can't rebind anything but a
          > >replica-aware
          > >> stub to a name that is currently bound to a replica-aware stub; remaining
          > >name
          > >> ''
          > >>
          > >> The object is obviously clusterable (it is a stateless EJB with "home-is-clusterable=true").
          > >> It has been deployed to the cluster target. When is working it is load
          > >balanced
          > >> between both servers. It deploys perfectly when starting up both servers,
          > >but
          > >> hot deployment does not work.
          > >>
          > >> This works fine when only one server is up.
          > >>
          > >> ¿Is not possible to do hot deployment in cluster?
          > >>
          > >
          > >
          >

Start-mdbs-with-application does not work

Hi,
We have a cluster with two managed servers and a JMS server on a migratable target on WLS 10.3.2. We have some MDBs within an EAR module deployed on the cluster. When the managed servers are restarted, WLS produces the following warning:
<The Message-Driven EJB: LogReceiver is unable to connect to the JMS destination: jms/loggingQueue. The Error was:
javax.naming.NameNotFoundException: Unable to resolve 'jms.loggingQueue'. Resolved 'jms'; remaining name 'loggingQueue'
at weblogic.jndi.internal.BasicNamingNode.newNameNotFoundException(BasicNamingNode.java:1139)
at weblogic.jndi.internal.BasicNamingNode.lookupHere(BasicNamingNode.java:252)
at weblogic.jndi.internal.ServerNamingNode.lookupHere(ServerNamingNode.java:182)
at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:206)
at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:214)
at weblogic.jndi.internal.WLEventContextImpl.lookup(WLEventContextImpl.java:254)
at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:393)
at javax.naming.InitialContext.lookup(InitialContext.java:392)
at weblogic.jms.common.CDS$2.run(CDS.java:222)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.jms.common.CDS.getDDMembershipInformation(CDS.java:216)
at weblogic.ejb.container.deployer.MessageDrivenBeanInfoImpl.createMDManagers(MessageDrivenBeanInfoImpl.java:1295)
at weblogic.ejb.container.deployer.MessageDrivenBeanInfoImpl.activate(MessageDrivenBeanInfoImpl.java:1092)
at weblogic.ejb.container.deployer.EJBDeployer.activate(EJBDeployer.java:1324)
at weblogic.ejb.container.deployer.EJBModule.activate(EJBModule.java:480)
at weblogic.application.internal.flow.ModuleListenerInvoker.activate(ModuleListenerInvoker.java:227)
at weblogic.application.internal.flow.DeploymentCallbackFlow$2.next(DeploymentCallbackFlow.java:415)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:83)
at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:75)
at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:67)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:1267)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:83)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:409)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:54)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:196)
at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
We have configured a System module with a ConnectionFactory on a default targetting and a Queue deployed on the JMS Server. The jndi names for the ConnectionFactory and the Queue have been properly configured.
Apparently, the container tries to bind the MDBs with their relative destination, but is unable to proceed due to the cluster jndi not having been loaded yet. According to the documentation, we could manage to avoid this early binding by specifying
<wls:start-mdbs-with-application>true</wls:start-mdbs-with-application>
in weblogic-application.xml. I tried (also using false, because the documentation is not that clear in this aspect), but without any result. Is there a reason why we cannot manage to have the mdbs connecting later with their destination?
Also, we got a warning message in the deployment page, claming that the MDBs in the server that is not hosting the JMS server are not connected to their destination. They stuck on state "initializing". While, if we manually resume the connection, via console, the state turns to "Connected". Are these issues correlated somehow?
Any help will be very much appreciated.
Thanks in advance,
- Francesco.

Hi Francesco,
From the link below (i.e. Oracle link for WLS-11g) it states that
“Set to false to defer message processing until after WebLogic Server opens its listen port.”
Search for: start-mdbs-with-application
Link-1 http://download.oracle.com/docs/cd/E15523_01/web.1111/e15493/summary.htm
*# Conclusion:*
This means that “false” should have resolved your issue but it is not so this might be a bug. Similar bug was seen in WLS-9.2 version which was fixed in WLS-9.2 Mp-1 version check out the link below.
Search for: CR293982 or CR299012
Link-2 http://download.oracle.com/docs/cd/E13222_01/wls/docs92/issues/known_resolved.html
However if it was fixed in WLS 9.2 Mp-1 then the same issue is most probably taken care in WLS 10.x.x version also.
*# Suggestion:*
- Try to set “start-mdbs-with-application” as “true” and check if that works for you.
This is because if you read the “Link-1″ carefully it states that “With default setting of true”, however when you check the “Default” column it shows “false”. Hence cant say which one is default. It might be document bug as well. However you have tried it so you can skip this suggestion.
*# How to solve this issue:*
1) Create a simple test case to prove that “start-mdbs-with-application” when set as “false” does not work.
2) Open a ticket with Oracle and provide all the details with the test case and let them do their job.
Hope this information helps.
Regards,
Ravish Mody

Apache bridge & Basic Auth does not work

The WebLogic newsgroups are not the appropriate place to file product defect
reports.
I suggest that you file a bug report with our support organization. Be sure
to include a complete test case. They will also need information from
you -- please review our external support procedures:
http://www.beasys.com/support/index.html
Thanks,
Michael
Michael Girdley
Product Manager, WebLogic Server & Express
BEA Systems Inc
Jaroslav Mechacek <[email protected]> wrote in message
news:[email protected]..
>
I tried mod_wl with apache 1.3.12 ( mod_ssl / openssl ) ,
but the basic auth does not work.
When apache starts it complains that mod_lw uses plain apache api
Tue May 16 17:29:54 2000] [warn] Loaded DSO libexec/mod_wl.so uses plain
Apache 1.3 API, this module might crash under EAPI! (please recompile it
with -DEAPI)
When I request protected page, apache returns both
HTTP/1.1 200 OK , HTTP/1.1 401 Unauthorized
what apache / ssl configurations are known to work ?
Escape character is '^]'.
GET /file/index.html HTTP1.0
HTTP/1.1 200 OK
Date: Tue, 16 May 2000 14:47:01 GMT
Server: Apache/1.3.12 (Unix) mod_ssl/2.6.4 OpenSSL/0.9.5a
HTTP/1.1 401 Unauthorized xxx:
www-authenticate: Basic realm="WebLogic Server"
content-length: 23
content-type: text/html
connection: Close
No credentials supplied

Jrockit multicast bug on RHEL4, WLS cluster does not works!

OS and Kernel Version: Linux achilles1 2.6.9-34.0.1.ELsmp #1 SMP Wed May 17 16:59:36 EDT 2006 x86_64 x86_64 x86_64 GNU/Linux
We use Bea Weblogic 8.1SP5 with Jrockit JVM 1.4.2 on RHEL3. We upgraded to operating system to RHEL4, and found that the interface binding for multicast communication does not bind to the correct interface, it is always using the default interface. We tried it from a sample program, and found that the error is in the JVM.
This is a critical error for us, because our application server cluster use multicast for cluster communication.
No error msg. It seems like this BUG:
http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=4082533 but it is solved.
List steps to reproduce the problem:
socket = new MulticastSocket(i);
if(s2 != null)
try
InetAddress inetaddress = InetAddress.getByName(s2);
System.out.println("Using interface at " + inetaddress.getHostAddress());
socket.setInterface(inetaddress);
System.out.println(socket.getInterface());
catch(SocketException socketexception)
throw socketexception;
}

Helo,
You can reproduce it by this way (we have 6 RHEL4 servers, problem is the same). We tried with programs written in C (mcast,Tibco), multicast perfectly works on all interfaces on all servers. But in Java:
Server:
[wlxapp@webex3]$ uname -a
Linux webex3 2.6.9-34.0.1.ELsmp #1 SMP Wed May 17 17:05:24 EDT 2006 i686 i686 i386 GNU/Linux
Problem - with Bea mukticast tester (or any Java class), using the nondefault webex3-priv interface(eth1):
[wlxapp@webex3]$ java -cp wl9.jar utils.MulticastTest -N webex3_priv -I webex3_priv -A 224.1.1.11 Starting test. Hit any key to abort Using interface at 192.168.1.1 Using multicast address 224.1.1.11:7001 Will send messages under the name webex3_priv every 2 seconds Will print warning every 600 seconds if no messages are received
I (webex3_priv) sent message num 1
I (webex3_priv) sent message num 2
I (webex3_priv) sent message num 3
Did not receive any message.
But if we use the default webex3 interface (eth0)
[wlxapp@webex3]$ java -cp wl9.jar utils.MulticastTest -N webex3 -I webex3 -A 224.1.1.11 Starting test. Hit any key to abort Using interface at 10.4.20.4 Using multicast address 224.1.1.11:7001 Will send messages under the name webex3 every 2 seconds Will print warning every 600 seconds if no messages are received
I (webex3) sent message num 1
I (webex3) sent message num 2 Received message 2 from webex3
I (webex3) sent message num 3 Received message 3 from webex3
Works perfectly.
TCPDUMP:Messages are out from server(other srv also see it), so we have problems probably with receiving them:
[root@webex3]# tcpdump -i eth1
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth1, link-type EN10MB (Ethernet), capture size 96 bytes
11:42:56.647362 IP webex3_priv.idmz.t-mobile.intra.afs3-callback > 224.1.1.111.afs3-callback: rx type 95 (1472)
11:42:56.648168 IP webex3_priv.idmz.t-mobile.intra > 224.1.1.111: udp
11:42:56.648245 IP webex3_priv.idmz.t-mobile.intra > 224.1.1.111: udp
We examined the lsof output, the tester bind to all interfaces, so it should receive the messages:
[wlxapp@webex3]$ /usr/sbin/lsof -p 11127
gij 11127 wlxapp 8u IPv4 150320 UDP *:afs3-callback
We tried the test with Java 1.4.2 and 1.5 (Jrockit and Sun), the results are the same.
You can easily reproduce the problem with an RHEL4 server with 2 network interface.
Our real problem that if multicast have problems, our Weblogic clusters does not works.

WLEC does not work

Hello,
after trying unsuccessfully for several hours to get WLEC to work on
WLS 5.1, I think I might ask this group.
It simply does not work.
I have installed the latest service pack (6) and I'm now trying to
install the WLEC version included therein. I've merged the files from
wlec_classes.jar (some classes in the package
com.beasys.CORBA.pool.weblogic) into the $WLS_HOME/classes tree,
copied the files wleorb.jar and wlepool.jar to $WLS_HOME/lib and added
them to the appropriate class paths as described in the
README_wlec.txt file that comes with WLEC. WLS is started as follows:
/opt/JAVA/JDK/1.2.2/bin/java -ms64m -mx64m -classpath ./lib/weblogic510sp6boot.jar:./lib/wleorb.jar:./classes/boot:./eval/cloudscape/lib/cloudscape.jar -Dweblogic.class.path=./lib/weblogic510sp6.jar:./lib/wlepool.jar:./license:./classes:./lib/weblogicaux.jar:./myserver/serverclasses -Dweblogic.home=. -Djava.security.manager -Djava.security.policy=$WLSHOME/weblogic.policy -Dweblogic.system.name=myserver -Djava.naming.ldap.version=2 weblogic.Server
(README_wlec.txt does not document the order in which the jar files
should appear in the class paths..?)
Furthermore, I've defined an IIOP connection pool in
weblogic.properties like this:
weblogic.CORBA.connectionPool.myIIOPConnectionPool=\
appaddrlist=//wlehost:3800,\
failoverlist=//wlehost:3800,\
minpoolsize=4,\
maxpoolsize=7,\
domainname=test
A WLE 5.1 instance is waiting for IIOP connections at wlehost:3800,
providing the WLE domain "test".
WLS starts up and functions flawlessly, but the IIOP connection pool
doesn't show up in the WebLogic Console (the "IIOP Connection Pool
Manager" branch is missing completely). An attempt to connect to the
pool with the following code:
com.beasys.Tobj_Bootstrap tBootstrap
= com.beasys.BootstrapFactory.getClientContext("myIIOPConnectionPool")
results in a NullPointerException in getClientContext.
I can connect to the running WLE server directly, bypassing the pool,
like this:
String[] args = new String[0];
org.omg.CORBA.ORB tOrb = org.omg.CORBA.ORB.init(args, null);
com.beasys.Tobj_Bootstrap tBootstrap
= new com.beasys.Tobj_Bootstrap(tOrb,"//wlehost:3800");
This works, which proves that WLE is not the problem, right?
The java version is:
$ /opt/JAVA/JDK/1.2.2/bin/java -version
java version "1.2.2"
Classic VM (build JDK-1.2.2_006, green threads, sunwjit)
$
(I've tried 1.3, too)
running on:
$ uname -a
SunOS bird 5.8 Generic_108528-01 sun4u sparc
$
WLE runs on:
wlehost:~$ uname -a
AIX wlehost 3 4 002013145700
wlehost:~$
What might be the problem here?
Thanks,
Olaf
Olaf Klischat | Fraunhofer ISST
Oberfeldstrasse 132 | Mollstrasse 1
12683 Berlin, Germany | 10178 Berlin, Germany
phone: +49 30 54986231 | mail: [email protected]

Craig Perez <[email protected]> writes:
WLS starts up and functions flawlessly, but the IIOP connection pool
doesn't show up in the WebLogic Console (the "IIOP Connection Pool
Manager" branch is missing completely). An attempt to connect to the
pool with the following code:
com.beasys.Tobj_Bootstrap tBootstrap
= com.beasys.BootstrapFactory.getClientContext("myIIOPConnectionPool")
results in a NullPointerException in getClientContext.Have you examined your WLS startup log very carefully to look
for any connection pool errors?Yes I have. I've searched (case-insensitively) for "iiop" and the
hostname of the host running WLE ("wlehost"), and there was always
only one log entry per WLS session:
Mon Dec 04 16:36:50 CET 2000:<I> <Config> Property name: 'weblogic.CORBA.connectionPool', current value: '[weblogic.CORBA.connectionPool.myIIOPConnectionPool=appaddrlist=//wlehost:3800,failoverlist=//wlehost:3800,minpoolsize=4,maxpoolsize=7,domainname=test ]'
This seems to be a generic notification that the property was read and
that the property name
"weblogic.CORBA.connectionPool.myIIOPConnectionPool" was recognized
(otherwise there would have been an "undeclared property" error
message, right?).
How would a log message look which notifies the user that an IIOP
conection pool has been set up successfully?
When I delete or rename the file wleorb.jar or remove it from the
classpath, I get the following exception when WLS boots:
Tue Dec 05 15:42:11 CET 2000:<E> <WebLogicServer> Failed startup on com.beasys.CORBA.pool.weblogic.PoolStartUp
java.lang.NoClassDefFoundError: com/beasys/CORBA/pool/ConnectionPoolManagerImpl
at java.lang.Class.getMethod0(Native Method)
at java.lang.Class.getMethod(Class.java:888)
at weblogic.t3.srvr.T3Srvr.callPoolStartupMehtod(T3Srvr.java:1444)
at weblogic.t3.srvr.T3Srvr.startIIOPConnectionPools(T3Srvr.java:1422)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java:1262)
at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:827)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:99)
at weblogic.Server.main(Server.java:65)
at weblogic.Server.main(Server.java:55)
(note the spelling mistake ("callPoolStartupMehtod"). Could this be
part of the problem?)
When I remove the connection pool entry from weblogic.properties, the
exception disappears.
I examined the file $WLS_HOME/myserver/weblogic.log as well as the
standard output and standard error of the WLS process. Are there any
other places to look at?
I'm still suspecting the order in which the JAR files appear in my
system class path and weblogic class path. As pointed out in my
previous posting, the order is as follows:
system class path:
./lib/weblogic510sp6boot.jar:./lib/wleorb.jar:./classes/boot:./eval/cloudscape/lib/cloudscape.jar
weblogic.class.path:
./lib/weblogic510sp6.jar:./lib/wlepool.jar:./license:./classes:./lib/weblogicaux.jar:./myserver/serverclasses
Is anything wrong with that? I could try out all permutations, but
that would take a while....
Could anybody post the class paths of a WLS configuration with a
working WLEC?
Thank you,
Olaf
Olaf Klischat | Fraunhofer ISST
Oberfeldstrasse 132 | Mollstrasse 1
12683 Berlin, Germany | 10178 Berlin, Germany
phone: +49 30 54986231 | mail: [email protected]

Der2pem does not work

I followed the manual instructions and ran the setWLSEnv.sh from the /server/bin directory to make sure weblogic.jar is in the path. Now when I run der2pem as suggested in the bea weblogic manual der2pem does not work.
[182] % sudo java utils.der2pem
Exception in thread "main" java.lang.NoClassDefFoundError: utils/der2pem
[183] %
Did anyone else faced the same problem?
Thanks

Forget the environment script and specify the classpath when you execute
java. The path is not important, only the classpath.
java -cp ${WL_HOME}/server/lib/weblogic.jar utils.der2pem ...
Grant
I followed the manual instructions and ran the setWLSEnv.sh from the
/server/bin directory to make sure weblogic.jar is in the path. Now
when I run der2pem as suggested in the bea weblogic manual der2pem
does not work.
[182] % sudo java utils.der2pem
Exception in thread "main" java.lang.NoClassDefFoundError:
utils/der2pem
[183] %
Did anyone else faced the same problem?
Thanks

Installed Premiere Pro CS4 but video display does not work?

I just got my copy of CS$. After installing Premiere I found two things that seem very wrong:
1) video display does not work, not even the little playback viewer next to improted film clips located on the project / sequence window. Audio works fine.
2) the UI is way too slow for my big beefy system.
My pc is a dual boot Vista-32 and XP system with 4GB of memory installed and nvidia geforce 280 graphics board with plenty of GPU power. The CS4 is installed on the Vista-32 partition. My windows XP partition on the same PC with Premiere CS2 works great and real fast.
Any ideas how to solve this CS4 install issue?
Ron

I would like to thank Dan, Hunt, and Haram:
The problem is now very clear to me. The problem only shows up with video footage imported into PP CS4 encoded with "MS Video 1" codec. So this seems to be a bug. The codec is very clearly called out and supported within various menues but video with this codec just will not play in any monitor or preview window. In addition the entire product looks horrible with respect to performance while PP CS4 trys its best to play the video. Audio will start playing after about 30 seconds. And once in awhile part of video shows up at the wrong magnification before blanking out again.
My suggestion to the Adobe team: fix the bug and add some sample footage to the next release so new installations can test their systems with known footage.
My PC is brand new with the following "beefy" components:
Motherboard
nForce 790i SLI FTW
Features:
3x PCI Express x16 graphics support
PCI Express 2.0
NVIDIA SLI-Ready (requires multiple NVIDIA GeForce GPUs)
DDR3-2000 SLI-Ready memory w/ ERP 2.0 (requires select third party system memory)
Overclocking tools
NVIDIA MediaSheild w/ 9 SATA 3 Gb/sec ports
ESA Certified
NVIDIA DualNet and FirstPacket Ethernet technology
Registered
CPU: Intel Core 2 Quad Q9550
S-Spec: SLAWQ
Ver: E36105-001
Product Code: BX80569Q9550
Made in Malaysia
Pack Date: 09/04/08
Features:
Freq.: 2.83 GHz
L2 Cache: 12 MHz Cache
FSB: 1333 MHz (MT/s)
Core: 45nm
Code named: Yorkfield
Power:95W
Socket: LGA775
Cooling: Liquid Cooled
NVIDIAGeForce GTX 280 SC graphics card
Features:
1 GB of onboard memory
Full Microsoft DirectX 10
NVIDIA 2-way and 3-way SLI Ready
NVIDIA PureVideo HD technology
NVIDIA PhysX Ready
NVIDI CUDA technology
PCI Express 2.0 support
Dual-link HDCP
OpenGL 2.1 Capaple
Output: DVI (2 dual-link), HDTV
Western Digital
2 WD VelociRaptor 300 GB SATA Hard Drives configured as Raid 0
Features:
10,000 RPM, 3 Gb/sec transfer rate
RAM Memory , Corsair 4 GB (2 x 2 GB) 1333 MHz DDR3
p/n: TW3X4G1333C9DHX G
product: CM3X2048-1333C9DHX
Features:
XMS3 DHX Dual-Path 'heat xchange'
2048 x 2 MB
1333 MHz
Latency 9-9-9-24-2T
1.6V ver3.2

A2109 tablet autorotate does not work

The autorotation on my recently purchased tablet A2109 does not work. I look in settings and the auto rotate field is not highlighted, I therefore cannot choose to turn it on.The tablet has the Android jellybean OS and I did update it but to no avail. Can anyone help?
Thanks
Solved!
Go to Solution.

Dear tdsouza
Welcome in lenovo forums
just a clarification , do you mean option Rotate is dimmed in setting
Please let me know
Thanks
Alaa
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

For what reason on my tablet with OS Android 4.1 does not work flash on the sites?

Hi! I recently bought a Google Nexus 7 tablet with Android 4.1 operating system and on my tablet does not work flash sites. Why adobe does not release a new version of flash for android 4.1? Why it was necessary to buy a company Macromedia, if adobe does not want to develop web technology? I think against Adobe can sue for violation of antitrust

I found this for example:
http://www.slashgear.com/adobe-no-jelly-bean-flash-flash-player-pulled-altogether-august-1 5-29236404/

My flash flayer does not work on my Windows 8 Surface Tablet, it also won't let me see if i already

My flash flayer does not work on my Windows 8 Surface Tablet, it also won't let me see if i already have it installed...

1.      Are you getting any error message?
2.      Which browser are you using?
3.      Were there any recent changes made on the computer prior to the issue?

My flash player does not work on my tablet.

My flash player does not work on my tablet

Your tablet uses Android OS.
There is no more Flash Player for Android and there won't be another. Android is no longer compatible with Flash Player. Playing Flash content is very processor consumptive and it drains your battery, also shortening the life of it. Android (Google) recommends using either "Dolphin" or "Puffin" as your browser if you need to view Flash content with a mobile device running Android. They're both free in the GooglePlay store. These browsers use "server side" rendering to reduce the load on your device.

Dynamic image does not work in the template builder plug-in (Apex-BI Intgr)

Hi all, I posted this problem in the BI Publisher topic but nobody responded maybe this is because mods thought this is an Apex-BI integration issue.
If I'm in the wrong place, please do warn me.
The documentation says:
Direct Insertion
Insert the jpg, gif, or png image directly in your template.
...This works obviously
URL Reference
1. Insert a dummy image in your template.
2. In Microsoft Word's Format Picture dialog box select the Web tab. Enter the following syntax in the Alternative text region to reference the image URL:
url:{'http://image location'}
For example, enter: url:{'http://www.oracle.com/images/ora_log.gif'}
...This works too when I hardcode an url as url:{'http://www.google.com.tr/images/firefox/mobiledownload.png'}
Element Reference from XML File
1. Insert a dummy image in your template.
2. In Microsoft Word's Format Picture dialog box select the Web tab. Enter the following syntax in the Alternative text region to reference the image URL:
url:{IMAGE_LOCATION}
where IMAGE_LOCATION is an element from your XML file that holds the full URL to the image.
...This, however, does not work.
I use Apex' report query tool and My query is like
select 'http://www.google.com.tr/images/firefox/mobiledownload.png' IMAGE_LOCATION from ... (a single result set for my template)
the xml data is generated with an IMAGE_LOCATION tag. I load it to word template plug-in. The Url successfully displays in the report if I make it a plain-simple field.
But when it's in the image format->web->alt text as url:{IMAGE_LOCATION} no image displayed.
I need to keep this design procedure simple so a simple word user could design a report via using just template builder plug-in. I don't wish to explore the xsl-fo area...yet.
Could you tell me why I can't get this url:{IMAGE_LOCATION} to work?
Regards
PS: My BI version: 10.1.3.4.1

Hi Oeren,
your steps seem basically to be correct. I have a tutorial how to do this here (in german)
http://www.oracle.com/webfolder/technetwork/de/community/apex/tipps/pdf-dyn-images/index.html
when you see the URL corrently as long as you have it as a plain text field, the XML tag and the
referencing seem to be OK.
Here are two thought - the issue might be one of these ...
How did you insert the dummy image into the word document - did you do it via "insert" or
via "link to file". "Link to File" does not work - you must choose the simple "insert".
Another one: Does your BI Server have a connection to the internet - is the proxy server correctly set ..?
Does this help ..?
Regards
-Carsten
Cloud Computing mit APEX umsetzen. Jetzt!
http://tinyurl.com/apexcloudde
SQL und PL/SQL: Tipps, Tricks & Best Practice
http://sql-plsql-de.blogspot.com

I have an event in my calendar that was sent by someone who does not work for the company anymore and I am reminded 2 times a week. How can I remove it?

I have an event in my calendar that was sent by someone that does not work for the company anymore and I am reminded 2 times a week. How do I delete it?

Tap on the event to open the event. Click the 'Edit' button in the event bubble, then press the 'Delete Event' button at the bottom of the Edit pop-up. It's a little different for events that come through Microsoft Exchange, you tap the event to bring up bubble and click the 'Details' button, and then press 'Decline' to remove the event.

JMS (bea 9) redelivery does not work ?

Similar Messages

Maybe you are looking for