JMS Foregin server configuration with two Weblogic 8.1 AS

Hi,
I have two Weblogic8.1 AS. Box 1 is configured with JMS connection factory and Topic. MDB is deployed on Box 2, which is configured to listen to Box1 JMS Topic. I am running session bean which is publishing JMS message to the Topic on Box1. Also, I have configured JMS foreign Server on Box2 pointing to Box1 connection factory and Topic.
MDB throws error "Destination not found", while deploying. I read somewhere in the net, that We need Weblogic with Clustering licence for configuring Foreign JMS Server.
Pls. help me.
Regards
Anand Bobade

hi... can you please send me the java code for messaging part ...... i want to know how you are sending
message from server and it is listened at different server?
I am also in same condition....I have configured JMS foreign server on box 1 .....on box2 my MDB is listening....
My problem is how do i send a message to a foreign queue which is inside JMS Foreign Server..... I am not able to give any JNDI name to this server... so please send me the code from which you are sending the Message.
Thanks in advance

Similar Messages

Is it possible that Exchange UM could be configure with two call managers over the same sip?

Hi,
I have Cisco call manager 8.2 integrated with Microsoft Exchange Server 2010 Unified Messaging.
Call manager has primary and secondary server. I created a sip trunk and linked primary CUCM with Exchange. Users can leave and get voice mails.
Problem: In case that primary server is down (WAN is down) the users registered on secondary server but they cannot contact to Exchange Unified Messaging.
I added new UM Dial Plan with the same pilot and associated it to the secondary CUCM server. UM answered but do not recognize the extension number "is not a valid mailbox extension".
Is it possible that Exchange UM could be configure with two call managers over the same sip, the same pilot number, different associated UM servers and get access to the same voice mail boxes?
If not:
Does exist a way to configure Exchange UM that will work if one CUCM server is down?
Thank you,
Peter

Hi,
I have Cisco call manager 8.2 integrated with Microsoft Exchange Server 2010 Unified Messaging.
Call manager has primary and secondary server. I created a sip trunk and linked primary CUCM with Exchange. Users can leave and get voice mails.
Problem: In case that primary server is down (WAN is down) the users registered on secondary server but they cannot contact to Exchange Unified Messaging.
I added new UM Dial Plan with the same pilot and associated it to the secondary CUCM server. UM answered but do not recognize the extension number "is not a valid mailbox extension".
Is it possible that Exchange UM could be configure with two call managers over the same sip, the same pilot number, different associated UM servers and get access to the same voice mail boxes?
If not:
Does exist a way to configure Exchange UM that will work if one CUCM server is down?
Thank you,
Peter

Server 2003 with two network cards problems

We have a win server 2003 with two network cards. From the server we connect using a vpn client from cisco to another server. When we do that we can NOT RDC to our server because it inherits the remote IP from the vpn connection. We installed an additional NIC. We gave an static IP to connect to our local network. How can we or is there a way to tell the vpn client to use one nic card and leave the other so we can RDC to it? thanks

It is possible to configure server to use on nic for incoming and other for outgoing, but it is not possible when vpn client is running. Also it cannot be specified as to which card to use.

Remote Access to Windows 2008 R2 Server configured with local IP

Hello,
I have a Windows 2008 R2 Server configured with local IP (e.g. 192.168.1.115).
Please how can I access it remotely outside its local domain through (remote desktop connection).
Thank you.
Tony.

Hi Tony,
Based on your description, you would like to connect to the Windows 2008 R2 server via remote desktop connection.
So you need to enable remote desktop on the Windows 2008 R2 server if it is not already.
1.Install and configure the Remote Desktop Session Host role service in the Windows 2008 R2 server.
2.Add related user to the Remote Desktop Users group in the Windows 2008 R2 server.
3.Configure remote desktop connection in the Client.
Also, due to you would like to access it remotely outside the domain, so you will need a VPN connection or a port forward to connect through.
For more details, please refer to the guide below,
Installing and Configuring Remote Desktop Session Host
http://technet.microsoft.com/en-us/library/dd883253.aspx
Allow Remote Desktop connections from outside your home network
http://windows.microsoft.com/en-IN/windows7/allow-remote-desktop-connections-from-outside-your-home-network
Best Regards,
Tina

One Planning server configured with different BI server

Hello Everyone,
I have a Planning server configured with BI workspace (Hyperion 9.3.1). There are 5 Planning applications already running smoothly.
Can I have another BI server pointing to the same Planning server? Now I want one more Planning application on the same Planning server but different BI server.
If its possible, won't it affect the other applications already present in the Planning server?
Is it possible. Your prompt response would be appreciated.
Thanks

Hi All,
Thank you very much for the response....Had not been keeping well, so was unable to follow the forum....
The fact is the current BI server is on 9.3.1 and Planning server is also on 9.3.1, in which I have 5 apps that are running smoothly....
I have one more instance of Hyperion Planning application which is on version 3.5.1 and I need to upgrade it to 9.3.1. It would have been a smooth process if I would have just migrated it in the current set up. But we have a constraint here. The BI server is loaded and hence I can't have one more application configured on it. And also the apps belong to different departments. So they want a distinct BI server for this one single app.
So, I have been asked to use a different BI server for workspace and reporting needs, and the existing Planning server(which is 9.3.1) for the Planning application.
Kindly suggest me what should be my approach.
Thanks

WebLogic 10.3.3 - 2-Way SSL setup between WLS JMS Foregin Server & IBM MQ 6

Hi,
I am trying to configure 2-Way SSL between WebLogic 10.3.3 using JMS Foreign Server and IBM MQ 6. I could not find any documentation on this.
Can someone provide with steps for setting up 2-Way between WebLogic and IBM MQ?
Also I want to use SSLPEERNAME attribute in MQ Connection Factory and generate bindings so that I can connect to correct queuemanager on MQ side. Please let me know the configuration steps and check's that have to be done on WLS and IBM MQ side on this.
Thanks in advance
- BoyelT

Check this:
http://www.ibm.com/developerworks/websphere/library/techarticles/0510_fehners/0510_fehners.html

Connect BizTalk Server Configuration with Sql Azure - version 2013 R2

Hi,
My data resides on Sql Azure. I need to create BizTalkRuleEngineDb on Sql Azure using Microsoft BizTalk Server Configuration wizard. Subsequently manage rules from Business Rule Composer.
I am unable to connect to Sql Azure from BizTalk Server Configuration application. Without this i could not create BizTalkRuleEngineDb on Sql Azure. I gave the following details:
Database server name: <servername>.database.windows.net,1433
User name: <username>
Password: <pwd>
When i click configure button, a message pops "The database server you specified cannot be reached...."
All i need from BizTalk is to create Business Rules Engine DB on Sql Azure. Then I would like to manage rules using Business
Rule Composer connecting to Sql Azure BizTalkRuleEngineDb.<o:p></o:p>
My business logic will programmatically access BizTalkRuleEngineDb db and execute rules using Microsoft.RuleEngine.dll<o:p></o:p>
Is this a feasible solution? I would like to see your inputs.
Any help is appreciated.
Thanks,
Tushar

First I would suggest you to perform sanity check to confirm if SQL server connectivity is perfect.
1) Verify the MSDTC Settings on both the servers:- It should resemble as below.
2) UDL Test:- Create a new "Text Document"(new notepad file) rename it to ABC.udl, double click and give the SQL server details and Test connection. If this fails it means BizTalk is not at all able to connect with SQL and in this
case BizTalk Application is just a victim of Network connectivity issue.
You can also refer the below article-
Resolving the issues you may face during BizTalk Runtime Configuration
Thanks,
Prashant
Please mark this post accordingly if it answers your query or is helpful.

Can i use single node manager with two weblogic domain?

I am very new to weblogic and node manager.
i had created two domains in weblogic. (single node manger).
Can i connect both domains with same nodemanger?
How to do this?

The node manager uses a nodemanager.domains file to determine which domains it manages, for example,
domain_name=/path_to_domain/domain_name
other_domain_name=/path_to_other_domain/other_domain_name
This file can be found in the NODEMANAGER_HOME, that you specified when starting the node manager (startNodeManager - NODEMGR_HOME="${WL_HOME}/../oracle_common/common/nodemanager")
When you are running the domain on multiple machines you have to enroll the node manager into the domain (http://docs.oracle.com/cd/E23943_01/web.1111/e13813/reference.htm#i1065827)
A scripted example can be found here: Middleware Snippets: Automate WebLogic Installation and Configuration. The Node Manager administration guide can be found here: Oracle&reg; Fusion Middleware Node Manager Administrator's Guide for Oracle WebLogic Server 11g Release 1 (10.3.6) -….

Error in Time Machine configuration with two usb disks??

Hi all,
I applied two 1TB usb disks to my Mac Mini with OSX 10.9 server (latest version) and configured them within the Server.app for time machine. As far as I understood, there should only be 1 backup destination 'backups' presented to my mac clients afterwards. But I always see 'backups' and 'backups-1', meaning both usb drives. Did I misunderstand the manual or is there something wrong with my Server.app?
Thank you for your help and best regards, BanditCH

Hi Wolfgang,
That just won't work. You can get a bigger external drive of 3TB for instance, that will work as one destination.
For this to work with 2 drives: every client needs to choose between two destinations, because both drives appear as a unique destination in TimeMachineServer. There's no way around it.
To be futureproof consider a dedicated NAS with 2 or more disks that supports timemachine so your capacity can grow when there are new bigger drives available. With 2 drives in a RAID mirror inside a NAS you have the best of both worlds. Client backup on a RAID mirror, when one drive fails it does not affect the entire backup. Connected to that NAS you can use an external USB disk for backup. Wonderful
Goodluck
Jeffrey

Problme in http server configuration with different database version

I have two instances of oracle databases on two different machines.
1. Oracle 9i R 2 with default http server
2. Oracle 10 g with http server of Oracle 10 g AS.
Now the problem is that when i want to cross configure the http servers that is to configure http server of 9i R 2 data base with the 10g data base or vice versa. It give the following error.
Can not run. Capacity probem.................
Plz tell me that is there any pronle in these configuration. Is it possible to configure 9i http server with 10 g data base and vice versa If yes then why I am getting errors???

The entries of the log file are as under:
Tue Aug 07 05:00:29 2007] [error] [client 10.8.7.33] [ecid: 1186444829:10.8.7.33:1968:7060:109,0] File does not exist: c:/oraas/apache/apache/htdocs/pls/orasso/htp.p
[Tue Aug 07 05:05:29 2007] [error] [client 10.8.7.33] [ecid: 1186445129:10.8.7.33:1968:7016:114,0] File does not exist: c:/oraas/apache/apache/htdocs/pls/orasso/htp.p
[Tue Aug 07 05:10:29 2007] [error] [client 10.8.7.33] [ecid: 1186445429:10.8.7.33:1968:7528:90,0] File does not exist: c:/oraas/apache/apache/htdocs/pls/orasso/htp.p
[Tue Aug 07 05:15:29 2007] [error] [client 10.8.7.33] [ecid: 1186445729:10.8.7.33:1968:5872:128,0] File does not exist: c:/oraas/apache/apache/htdocs/pls/orasso/htp.p
[Tue Aug 07 05:20:29 2007] [error] [client 10.8.7.33] [ecid: 1186446029:10.8.7.33:1968:2468:95,0] File does not exist: c:/oraas/apache/apache/htdocs/pls/orasso/htp.p
[Tue Aug 07 05:25:29 2007] [error] [client 10.8.7.33] [ecid: 1186446329:10.8.7.33:1968:7236:136,0] File does not exist: c:/oraas/apache/apache/htdocs/pls/orasso/htp.p
[Tue Aug 07 05:30:29 2007] [error] [client 10.8.7.33] [ecid: 1186446629:10.8.7.33:1968:536:116,0] File does not exist: c:/oraas/apache/apache/htdocs/pls/orasso/htp.p
[Tue Aug 07 05:35:29 2007] [error] [client 10.8.7.33] [ecid: 1186446929:10.8.7.33:1968:3556:108,0] File does not exist: c:/oraas/apache/apache/htdocs/pls/orasso/htp.p
[Tue Aug 07 05:40:29 2007] [error] [client 10.8.7.33] [ecid: 1186447229:10.8.7.33:1968:6920:132,0] File does not exist: c:/oraas/apache/apache/htdocs/pls/orasso/htp.p
[Tue Aug 07 05:45:29 2007] [error] [client 10.8.7.33] [ecid: 1186447529:10.8.7.33:1968:7536:119,0] File does not exist: c:/oraas/apache/apache/htdocs/pls/orasso/htp.p
[Tue Aug 07 05:50:29 2007] [error] [client 10.8.7.33] [ecid: 1186447829:10.8.7.33:1968:5108:76,0] File does not exist: c:/oraas/apache/apache/htdocs/pls/orasso/htp.p
[Tue Aug 07 05:55:29 2007] [error] [client 10.8.7.33] [ecid: 1186448129:10.8.7.33:1968:668:121,0] File does not exist: c:/oraas/apache/apache/htdocs/pls/orasso/htp.p
[Tue Aug 07 06:00:29 2007] [error] [client 10.8.7.33] [ecid: 1186448429:10.8.7.33:1968:6640:129,0] File does not exist: c:/oraas/apache/apache/htdocs/pls/orasso/htp.p
[Tue Aug 07 06:05:29 2007] [error] [client 10.8.7.33] [ecid: 1186448729:10.8.7.33:1968:7324:123,0] File does not exist: c:/oraas/apache/apache/htdocs/pls/orasso/htp.p
[Tue Aug 07 06:10:29 2007] [error] [client 10.8.7.33] [ecid: 1186449029:10.8.7.33:1968:2168:81,0] File does not exist: c:/oraas/apache/apache/htdocs/pls/orasso/htp.p
[Tue Aug 07 06:15:29 2007] [error] [client 10.8.7.33] [ecid: 1186449329:10.8.7.33:1968:2320:166,0] File does not exist: c:/oraas/apache/apache/htdocs/pls/orasso/htp.p
[Tue Aug 07 06:20:29 2007] [error] [client 10.8.7.33] [ecid: 1186449629:10.8.7.33:1968:7320:114,0] File does not exist: c:/oraas/apache/apache/htdocs/pls/orasso/htp.p
[Tue Aug 07 06:25:29 2007] [error] [client 10.8.7.33] [ecid: 1186449929:10.8.7.33:1968:7528:96,0] File does not exist: c:/oraas/apache/apache/htdocs/pls/orasso/htp.p
[Tue Aug 07 06:30:29 2007] [error] [client 10.8.7.33] [ecid: 1186450229:10.8.7.33:1968:7580:124,0] File does not exist: c:/oraas/apache/apache/htdocs/pls/orasso/htp.p
[Tue Aug 07 06:35:29 2007] [error] [client 10.8.7.33] [ecid: 1186450529:10.8.7.33:1968:668:124,0] File does not exist: c:/oraas/apache/apache/htdocs/pls/orasso/htp.p

Application Server Configuration with Multi-threaded Server

Hi, friends:
We seems to have some problem with our OAS configuration. Even our Oracle8 server is set as MTS, when we query through the OAS, everytime one request won't be processed until the previous one finished. How to configure OAS to process queries in parellel?
Also, is there anyway that we can cancel a running query? Because, usually our query is very time-consuming. But even we stopped it apparently in the interface end, we know it is still running backend. Performance is bad.
Thank you, Thank you.
David

Hi Balaji,
The Application server step by step guide is in the same guide as the CI installation guide. If you don't have it already you can download it from SAP Marketplace.
Regards
Juan

Raid 5 Configuration with Two Dead Drive Modules

I have a xRaid (14-250 drives) configured as a Raid 5 (raid 50). Two drives have failed, one on each side of the xRaid.
The Bad drives were pulled and new modules were installed. The new drives show green light, but when I retrieved data, the information is currupted. The New modules were removed and data was retrieved from the xRaid (missing the two drives) and the data appears to be okay. We are attepting to physically back-up all data on external drives.
What should we do to ensure best data preservation and how do we replace the dead drives. Thank You
xraid Mac OS X (10.3.9)

Thank you for your response.
The ADM are purchased as replacements. The xRaid is not iunder warranty (1.5 years old). They are the same 250 Gig configuration.
We have not tried to re-intall the new ADM's as we were concerned about the data, since they did not appear to be re-bulding them selves and we just 'sitting there'. So we thought that it would be a reasonable idea to performa a data back-up onto external drives...yes all 2+ terabytes. The back-up worked fine for about the first 1.5 Terabytes, but then the server would hang during the file copy process and lock-up the entire system. In looking further it has been determined that the system locks up at the same files (some 65Mb tifs) so I presume that the data is currupt.
The curruption of the data confuses me a little. We do have one dead ADM per controller side (one on the left and one on the right side) but it was my understanding that each controller could in theory loose one ADM without loosing data....
Also, the xRaid does Not have the Latest Firmware. Should we update the firmware while trying to get this system back into a healthy condition or should we wait until we get all ADM's back up an going prior to firmware upgrading?
Thank You

LYNC Server EDGE server configuration with single IP

Hello Guys,
I just Just wanted to configure LYNC 2010 EDGE server with just single IP on External NIC and with Single Public IP.
Could Someone please tell about the Port requirement and DNS requirement and Certificate requirement also for this....
Thanks in Advance.
Regards Rishi Aggarwal

Take a look at: https://blog.netnerds.net/2013/08/setup-a-fully-functional-lync-2013-lab-using-only-one-public-ip-address/
Also review potential issues by using a single public IP: http://lyncuc.blogspot.ca/2014/07/lync-edge-server-single-ip-address-how.html
Please mark posts as answers/helpful if it answers your question.
Blog
Lync Validator - Used to assist in the validation and documentation of Lync Server 2013.

Http server configuration with mod_ntlm and mod_plsql

I don't know if this is the right place to ask, but I will try anyway. We are trying to configure Oracle http server to use mod_ntlm to authenticate users for html-db application. After we configure the server to use mod_ntlm for mod_plsql content(pls), all the requests failed with 400 Bad Requests error. It looks like the mod_plsql does not recognize the http header for NTLM authentication(which is encrypted). Anyone knows how to make mod_ntlm and mod_plsql work together in oracle http server(i.e. Apache)? Thanks.

sorry, 291509, but this is the wrong forum for your question. one of these forums is used to determine the appropriate forums for posting. i'm, of course, not sure which one that is, but i'd start there if i were you.
regards,
raj

Question about RADIUS server configuration with a MacBook Pro

Hello,
I own a modem router which is capable of WPA2 Enterprise and I want to use it with a RADIUS server for authentication and security purposes.
However, I have a few doubts about this.
MY CONFIGURATION:
The modem router would be connected to a fixed PC with Windows and to a MacBook Pro (both with Ethernet)
The RADIUS server would be running on the MacBook Pro (freeRADIUS)
The bold is the issue, that comes when I disconnect the MBP (it's a notebook, so I use it disconnected from the router sometimes).
Supposing the router would have recognized it (correct configuration), it would disconnect from it.
My questions:
Would Wi-Fi be lost in this manner? Or would the modem router automatically switch to another Wi-Fi authentication?
If I reconnected the MBP to the modem router and re-run the RADIUS server, would I need to access the control panel and re-configure the WPA2 Enterprise in order for Wi-Fi to work again?
Thanks in advance,
Tyrexionibus

"Full HD 3DD camcorder..." Marketing at it's best.
This is HDV, right? HDV has the same data rate as DV...13.6GB/hour. But because of the MPEG-2 Long GOP format the HDV format employs, it can be a bit tough to edit, but mainly when rendering effects. IT will be slower than DV, and you can't monitor thru the camera like you can with DV, but a simple FW400 drive and Intel Mac will be fine. Better if you can convert to ProRes upon ingest, but then that eats up a LOT more space and requires at least FW800...
http://library.creativecow.net/articles/poisson_chris/hdv-prores.php
Shane

JMS Foregin server configuration with two Weblogic 8.1 AS

Similar Messages

Maybe you are looking for