JMS header fields

Can I update a JMS Message Header field or a JMS System Property for an existing JMS message without receiving it and then puting it back onto the queue ?

You can modify any of the JMS header fields any time you want. To put it
          on a queue would need a producer. But when you call producer.send/publish,
          it will overwrite nearly all of the header fields. The exceptions are
          JMSCorrelationID, JMSReplyTo and JMSType. Those three fields will retain
          the values you set.
          _sjz.

Similar Messages

How can we add source field data in to receiver JMS header

I have a scenario called IDOC(ECC System) or PROXY(SRM System) to JMS(Only one Queue).
ECC(Idoc) and SRM(Proxy) -
XI -
JMS
In the Idoc and proxy we have a field called Source System. If it is a Idoc then this source system field coming with SAP ECC if the data is coming from SRM System then the source system field is SAP SRM. My problem is how I can map these fields to the JMS header? Then according to the JMS header TIBCO will send this data to target systems. If data is coming from ECC then it will send it to one Third party system and if data is coming from SRM then it will send it to other Third party target system.

Hi Purushotham,
You can add it in receiver determination.
Our IDOC segement EDIDC_40 contains feild called SNDPRN and SNDPRT.
By using this in condition for configured receivers you can route this to your desired receiver system.
May be you can mantain two queues for your two receivers.
Regards,
Akshay.
reward points if useful.

How to set ApplIndentityData header field in JMS adapter

Hi Guys ,
    I have one requirement for update the field in SAP JMS header. I am using transport protocol for IBM Websphere MQ in JMS adapter.
While sending data to IBM Websphere MQ Queue via JMS Adapter, need to set the field called ApplIndentityData with the appropriate value which is populate to a MQHRF2 header of a message.
So, regarding that where will do it? Means JMS receiver adapter or IBM MQ level. If JMS receiver adapter, I think using ASMA, So please guide me how to set this filed value in JMS adapter or share any document you have.
Thanks & regards
Vijaykumar S

Hi RejaSekar,
       I reffered your blog and did the below settings in JMS module and ASMA settings.
1) Changed the mode for u201CJMS-Complaintu201D instead of u201CWebsphere MQ(non JMS)u201D
2) Additional JMS message properties tab created below property name and java type.
       LocalName    --> String
       Partname      --> String
3) In module parameter tab added the below module name and key
    AF_Modules/DynamicConfigurationBean   --> LocalEnterpriseBean --> RFH2HEADER
4) Under parameter Tab
     RFH2HEADER       -->   key.0      -->     insert http://sap.com/XI/System/JMS DCJMSMessageProperty0
     RFH2HEADER       -->   key.1      -->     insert http://sap.com/XI/System/JMS DCJMSMessageProperty0
     RFH2HEADER      --> value.0    -->    LocalName
     RFH2HEADER      --> value.1    -->    PartnerName
Kindly check the above settings whether this is correct or wrong. If anything wrong please let me know what we need to change JMS receiver adapter.
Actually my requirement is need to set these parameters and set the value to that parameters and pass in to /usr folder of a WebsphereMQ message.
Kindly check and help me out.
Thanks & regards
Vijayakumar S

MQ JMS non-compliant header field in HEXADECIMAL

Hello Experts,
Our scenario include a sender MQ Channel and a Receiver File adapter. We are passing a flat file using an Integrated Scenario to the file adapter. We are using the JMS CorrelationID header field to pass the file name to the file adapter. Unfortuantely, File adapter is receiving the filename in a HEX. So, the Filie adapter is writing the filename as huge value. I am not sure how this JMSCorrelationID header field is converting a string into a HEX value.
Any kind of help would be appreciated.
Thanks,
Mayur

hi
Try using 2 ways..
1. As Koen said.tick the JMS coorelation id on the adapter specific message attributes on the sender JMS adatper...
Then in a UDF....access this field and convert its byte format to string...but there might be character set issues
2. in the co-relation setting , set the PI message ID - to JMS correlation ID and tick the remove ID marker.
With this JMS corelation ID will be passed to PI message ID and then in UDF extract the PI message ID and pass it to filename
Edited by: Tarang Shah on Mar 25, 2010 1:52 PM

How to pass JMS header Information to proxy field

Hi,
I am working with JMS to Proxy scenario (Synchronous).
I am getting one header field at sender JMS channel which need to be mapped with one of the Proxy field.
and similarly when proxy returning one field value that need to be mapped with receiver channel header information.
could any one help me on how to achieve this.
regards,
Navneet

Hi,
>>Now My Question is how can I get Dynamic Configuration Key
Like this
1. switch on ASMA in sender JMS communication channel
2 Assign this udf to target field
UDF code
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/JMS","DCJMSMessageProperty9";
String valueOld = conf.get(key);
return valueOld;
3. Do a end to end testing (message mapping test will;l throw error)
Regards
Suraj

Setting the JMS Header from Payload

Hi Experts,
My requirement is to send the payment data coming from ECC to non sap system.Sender adapter is proxy and receiver is JMS.ECC will be sending the filename in one field and payload content as a string in another field.PI has to set the filename coming from ECC in JMS header property.What configuration changes should i need to make in JMS adapter to achieve it?
Converting the XML to string is possible in PI.But my question is converting the string XML data into XML fields is possible in SAP PI?If so how to do that?
Please provide your suggestion.
Regards,
Karthiga

Hi Karthiga,
The UDF is there in blog
DynamicConfiguration dynamicconfiguration = (DynamicConfiguration)param.get("DynamicConfiguration");
            DynamicConfigurationKey dynamicconfigurationkey = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/JMS", "DCJMSMessageProperty0");
            String s = dynamicconfiguration.get(dynamicconfigurationkey);
            CorrID.append(s);
Please let me know if you have any issue.
regards,
Harish

Does a MessageType variable store header fields (e.g.CorrId) as well?

Assume I got from a call from another BPEL process or from a JMS adapter.
The inbound message contains some header fields like a Correlation Id.
Does the incoming message type variable contain these (hidden) header fields as well?
In other words: If I copy the inbound MessageType variable to another, local, internal MessageType variable or even to the output MessageType variable (for the Callback) are the headers fields copied as well?
Peter

In short, no. Headers are not included in input/output variables. You can get/set them though. See:
http://chintanblog.blogspot.com/2007/12/insertextract-soap-headers-in-bpel-it.html
http://orasoa.blogspot.com/2007/09/using-custom-headers-in-bpel.html

Cookie - Bad Request - Size of a request header field exceeds server limit -

We are on cq5.5. We see this error intermittently. What is the best way to fix this? Cookie size seems to be adding to the issue.
Bad Request
Your browser sent a request that this server could not understand.
Size of a request header field exceeds server limit.
Cookie: cq-mrss=path%3D%252Fcontent%252Fdam%26p.limit%3D-1%26mainasset%3Dtrue%26type%3Ddam%3AAsse t; __unam=acfbce4-13b8ffd6084-6070cfe6-4; __utma=16528299.1850197993.1355330446.1361568697.1362109625.3; __utmz=16528299.1355330446.1.1.utmcsr=(direct)|utmccn=(direct)|utmcmd=(none); REM_ME=1004; SessionPersistence-author-lx_qa_author2=CLIENTCONTEXT%3A%3DvisitorId%3Danonymous%2Cvisito rId_xss%3Danonymous%7CPROFILEDATA%3A%3DauthorizableId%3Danonymous%2CformattedName%3DAnonym ous%20Surfer%2Cpath%3D%2Fhome%2Fusers%2Fa%2Fanonymous%2Cavatar%3D%2Fetc%2Fdesigns%2Fdefaul t%2Fimages%2Fcollab%2Favatar.png%2Cage%3D%2Cage_xss%3D%7CTAGCLOUD%3A%3Dtopic%3Aworkflow%3D 14%2Cindustry%3Aprocess_management%3D2%2Ctopic%3Aprocess_mining%3D3%2Ctopic%3Aprocess_docu mentation%3D1%2Ctopic%3Aintelligent_capture%3D5%2Cindustry%3Acapture%3D5%2Ctopic%3Adocumen t_imaging%3D2%2Ctopic%3Adistributed_intelligent_capture%3D2%2Ctopic%3Adocument_output_mana gement%3D4%2Cindustry%3Acontent_management%3D14%2Cindustry%3Asoftware_solutions_hardware%3 D4%2Cindustry%3Adevice_management%3D2%2Ctopic%3Ahelp_desk_services%3D2%2Cindustry%3Aintera ct%3D15%2Ctopic%3Asecure_content_monitor%3D2%2Ctopic%3Aelectronic_forms%3D2%2Ctopic%3Ainte lligent_forms%3D2%2Ctopic%3Adocument_accounting%3D2%2Ctopic%3Aerp_output_management%3D2%2C topic%3Aprint_release%3D2%2Cindustry%3Aoutput_management%3D4%2Ctopic%3Aerp_printing%3D4%2C topic%3Aenterprise_search%3D4%2Ctopic%3Amicrosoft_sharepoint%3D6%2Ctopic%3Adocument_filter s%3D4%2Cindustry%3Asearch%3D4%2Ctopic%3Ahuman_services_case_management%3D2%2Cindustry%3Aca se_management%3D2%2Cindustry%3Aimprove_business_processes%3D6%2Ctopic%3Abusiness_process_m odeling%3D1%2Ctopic%3Alawson%3D1%2Ctopic%3Aapplication_integration%3D8%2Cindustry%3Asoluti on%3D4%2Ctopic%3Amicrosoft_dynamics_crm%3D2%2Cindustry%3Ahealthcare%3D13%2Cindustry%3Areta il%3D8%2Cindustry%3Abanking%3D3%2Cindustry%3Aincrease_efficiency%3D7%2Cindustry%3Agovernme nt%3D8%2Ctopic%3Amicrosoft_outlook%3D2%2Ctopic%3Aesri%3D2%2Ctopic%3Ajd_edwards%3D2%2Ctopic %3Asap%3D1%2Cindustry%3Adrive_business_growth%3D1%2Cindustry%3Abusiness_challenges%3D6%2Ci ndustry%3Aconnect_distributed_workforce%3D1%2Ctype%3Alanding_page%3D2%2Ctopic%3Aconsulting _services%3D2%2Ctopic%3Aretail_pharmacy%3D2%2Cindustry%3Aindustry_solutions%3D5%2Ctopic%3A health_information_management%3D3%2Ctopic%3Apatient_scheduling%3D3%2Ctopic%3Aclinical_depa rtment_solutions%3D3%2Ctopic%3Aclinical_hit_integration%3D3%2Ctopic%3Apatient_admissions_r egistration%3D3%2Ctopic%3Ahealthcare_forms_management%3D3%2Ctopic%3Apatient_access%3D3%2Ct opic%3Aenterprise_print_management_software%3D2%2Ctopic%3Aprint_queue_management%3D2%2Ctop ic%3Aadvanced_print_management%3D2%2Ctopic%3Aemployee_onboarding%3D3%2Ctopic%3Ahuman_resou rces%3D1%2Cindustry%3Ahuman_resources%3D3%2Ctopic%3Aemployee_recruitment%3D1%2Cindustry%3A manufacturing%3D2%2Ctopic%3Aplatform_integration%3D1%2Ctopic%3Awealth_management%3D2%2Cind ustry%3Afinancial_services%3D2%2Ctopic%3Aaccount_opening%3D2%2Ctopic%3Acompliance%3D1%2Cin dustry%3Acompliance%3D1%2Ctopic%3Abusiness_operations_solutions_for_banking%3D2%2Ctopic%3A retail_delivery%3D1%2Ctopic%3Aloan_processing%3D1%2Ctopic%3Aon_demand_negotiable_documents %3D1%2Ctopic%3Anew_account_openings%3D1%2Ctopic%3Aon_demand_forms_customer_communications% 3D1%2Cindustry%3Ainsurance%3D1%2Ctopic%3Amicr_printing%3D1%2Ctopic%3Abank_branch_capture%3 D1%2Ctopic%3Aagency_capture%3D1%7C; ys-cq-damadmin-tree=o%3Awidth%3Dn%253A240%5EselectedPath%3Ds%253A/content/dam; ys-cq-damadmin-grid-assets=o%3Acolumns%3Da%253Ao%25253Aid%25253Ds%2525253Anumberer%25255E width%25253Dn%2525253A23%25255Esortable%25253Db%2525253A1%255Eo%25253Aid%25253Ds%2525253At humbnail%25255Ewidth%25253Dn%2525253A45%25255Esortable%25253Db%2525253A1%255Eo%25253Aid%25 253Ds%2525253Atitle%25255Ewidth%25253Dn%2525253A78%25255Ehidden%25253Db%2525253A1%25255Eso rtable%25253Db%2525253A1%255Eo%25253Aid%25253Ds%2525253Aname%25255Ewidth%25253Dn%2525253A3 37%25255Esortable%25253Db%2525253A1%255Eo%25253Aid%25253Ds%2525253Apublished%25255Ewidth%2 5253Dn%2525253A37%25255Esortable%25253Db%2525253A1%255Eo%25253Aid%25253Ds%2525253Amodified %25255Ewidth%25253Dn%2525253A78%25255Esortable%25253Db%2525253A1%255Eo%25253Aid%25253Ds%25 25253Ascene7Status%25255Ewidth%25253Dn%2525253A78%25255Ehidden%25253Db%2525253A1%25255Esor table%25253Db%2525253A1%255Eo%25253Aid%25253Ds%2525253Astatus%25255Ewidth%25253Dn%2525253A 71%25255Esortable%25253Db%2525253A1%255Eo%25253Aid%25253Dn%2525253A8%25255Ewidth%25253Dn%2 525253A78%25255Esortable%25253Db%2525253A1%255Eo%25253Aid%25253Ds%2525253Aworkflow%25255Ew idth%25253Dn%2525253A78%25255Ehidden%25253Db%2525253A1%25255Esortable%25253Db%2525253A1%25 5Eo%25253Aid%25253Ds%2525253Awidth%25255Ewidth%25253Dn%2525253A37%25255Esortable%25253Db%2 525253A1%255Eo%25253Aid%25253Ds%2525253Aheight%25255Ewidth%25253Dn%2525253A37%25255Esortab le%25253Db%2525253A1%255Eo%25253Aid%25253Ds%2525253Asize%25255Ewidth%25253Dn%2525253A37%25 255Esortable%25253Db%2525253A1%255Eo%25253Aid%25253Ds%2525253Areferences%25255Ewidth%25253 Dn%2525253A199%25255Esortable%25253Db%2525253A1%5Esort%3Do%253Afield%253Ds%25253Alabel%255 Edirection%253Ds%25253AASC; amlbcookie=04; ObLK=0x82abacf3a5e3b1e2|0x1cf34305ac210c7e9b2b07e3725392e2; iPlanetDirectoryPro=AQIC5wM2LY4Sfcw0UQ2MST5NlqDAsUi2dscer0wO7VMy9pE.*AAJTSQACMDYAAlMxAAIw NA..*; renderid=rend01; login-token=c9c0d027-c5f9-4e5a-9a90-09d1cf21cfd2%3a0279e369-1689-433c-80ef-d8411040efe5_6 15c2fd1eba8fd42%3acrx.default; ys-cq-siteadmin-grid-pages=o%3Acolumns%3Da%253Ao%25253Aid%25253Ds%2525253Anumberer%25255E width%25253Dn%2525253A23%25255Esortable%25253Db%2525253A1%255Eo%25253Aid%25253Ds%2525253At humbnail%25255Ewidth%25253Dn%2525253A50%25255Ehidden%25253Db%2525253A1%25255Esortable%2525 3Db%2525253A1%255Eo%25253Aid%25253Ds%2525253Atitle%25255Ewidth%25253Dn%2525253A386%25255Es ortable%25253Db%2525253A1%255Eo%25253Aid%25253Ds%2525253Aname%25255Ewidth%25253Dn%2525253A 148%25255Esortable%25253Db%2525253A1%255Eo%25253Aid%25253Ds%2525253Apublished%25255Ewidth% 25253Dn%2525253A25%25255Esortable%25253Db%2525253A1%255Eo%25253Aid%25253Ds%2525253Amodifie d%25255Ewidth%25253Dn%2525253A86%25255Esortable%25253Db%2525253A1%255Eo%25253Aid%25253Ds%2 525253Ascene7Status%25255Ewidth%25253Dn%2525253A86%25255Ehidden%25253Db%2525253A1%25255Eso rtable%25253Db%2525253A1%255Eo%25253Aid%25253Ds%2525253Astatus%25255Ewidth%25253Dn%2525253 A76%25255Esortable%25253Db%2525253A1%255Eo%25253Aid%25253Ds%2525253Aimpressions%25255Ewidt h%25253Dn%2525253A86%25255Esortable%25253Db%2525253A1%255Eo%25253Aid%25253Ds%2525253Atempl ate%25255Ewidth%25253Dn%2525253A86%25255Esortable%25253Db%2525253A1%255Eo%25253Aid%25253Ds %2525253Aworkflow%25255Ewidth%25253Dn%2525253A86%25255Ehidden%25253Db%2525253A1%25255Esort able%25253Db%2525253A1%255Eo%25253Aid%25253Ds%2525253Alocked%25255Ewidth%25253Dn%2525253A8 6%25255Ehidden%25253Db%2525253A1%25255Esortable%25253Db%2525253A1%255Eo%25253Aid%25253Ds%2 525253AliveCopyStatus%25255Ewidth%25253Dn%2525253A86%25255Ehidden%25253Db%2525253A1%25255E sortable%25253Db%2525253A1%5Esort%3Do%253Afield%253Ds%25253Atitle%255Edirection%253Ds%2525 3AASC; ys-cq-siteadmin-tree=o%3Awidth%3Dn%253A306%5EselectedPath%3Ds%253A/content/homesite/en-US /insights/video_unum-group-accelerates-workflows-with-solutions-; ys-cq-cf-clipboard=o%3Acollapsed%3Db%253A1; ys-cq-cf-tabpanel=o%3AactiveTab%3Ds%253AcfTab-Images-QueryBox; JSESSIONID=ad311ac3-7c24-4e62-ae8a-0ebacd8e8188; SessionPersistence-author-lx_qa_author1=CLIENTCONTEXT%3A%3DvisitorId%3Danonymous%2Cvisito rId_xss%3Danonymous%7CPROFILEDATA%3A%3DauthorizableId%3Danonymous%2CformattedName%3DAnonym ous%20Surfer%2Cpath%3D%2Fhome%2Fusers%2Fa%2Fanonymous%2Cavatar%3D%2Fetc%2Fdesigns%2Fdefaul t%2Fimages%2Fcollab%2Favatar.png%2Cage%3D%2Cage_xss%3D%7CGEOLOCATION%3A%3D%7CTAGCLOUD%3A%3 Dindustry%3Aconnect_distributed_workforce%3D1%2Cindustry%3Abusiness_challenges%3D1%2Cindus try%3Acontent_management%3D1%2Cindustry%3Ahealthcare%3D1%2Ctopic%3Afinance%3D1%2Ctopic%3Ap rocurement_processing%3D1%2Cindustry%3Afinancial_services%3D2%2Cindustry%3Ainsurance%3D2%2 Cindustry%3Aindustry_solutions%3D2%2Ctopic%3Aagency_capture%3D2%7C; s_cc=true; s_sq=lxmtest%3D%2526pid%253Dinsights%25253Avideo_unum-group-accelerates-workflows-with-so luti

Hi EbodaWill,
File daycare for fp 2324 where in you can configure & allow you to increase the request header size and avoid the bad request error OR for a package that improves client side persistence & does not use cookies.
Thanks,
Sham

Invoice Template problem - Putting a Header field in repeating Lines rows

Dear experts,
I would be grateful for a problem I am having with an Invoice statement I am developing (Oracle Applications 11.5.10 with BI Publisher version 10.1.3.4). This is very similar to the one in Tim Dexter's Blog (Anatomy of a Template):
http://blogs.oracle.com/xmlpublisher/2007/03/anatomy_of_a_template_ii_heade.html
My requirement is to add a single line into the lines table, as seen in the Blog, which is a COMMENTS field from the header part of the XML and the problem is that it can be 1 line to maybe 5 lines. This is only on the first page. This causes problems as I don't know how to find out how far down the lines table I may be after adding this COMMENTS header field in here, to then know how many lines to loop over to ensure that the lines do not carry on printing over the bottom of the page e.g. if the COMMENTS is 3 lines - how do I know this to then only print 3 minus the maximum lines per page ($lpp) only on the first page?
Any pointers would be of great help.
Many thanks,
Mark

The COMMENTS field I've found out can be of any varible size and include carriage returns. For example, could be:
JD Trx special instructions 010908
FAO: PETER MUSCUTT
REF: FERRY ROAD 2351
========================
INCOME DUE TO COMPANY FOR
THE OPERATION OF EFERRY
ROAD CAR PARK
This causes such problems as being able to know how many lines this field will be, so that I know where to start the first Lines row in the invoice and also how many lines I can put on this first page (starting point - $lpp).
One method I thought would be to count how many characters there are in this field, when it reaches the line size on the invoice, increment a count varible that would be used to indicate the starting point for the first lines record. I would need to compare each character and if it is a carriage return, then increment the count also. This seems quite a heavy wieght way to solve this and would welcome any over ideas.
Thanks,
Mark

How to view "From" header field in OUTgoing messages in Mail? Frustrating.

In Mail v.4.3 (in OSX 10.6.4), I need to view the "From" field in my outgoing messages as I am composing them. However, there seems to be no setting in Mail which allow this.
I find this very frustrating because in Eudora (which I used to use), the "From" field in outgoing messages is visible by default. But in Mail, not only is it not visible by default, there seems to be no way to make it visible.
In the "Customize..." button to the left of the Subject field in outgoing messages, one has the option to add as default outgoing message fields "cc," "bcc," "Reply-To," and "Subject," but none of those are what I want. It allows one to also view the address of the mail server, but that also is not what I'm looking for. What I want is to see my outgoing +email address+. And nowhere is there an option in the Preferences to turn this on. (At least as far as I could tell.)
In fact, the only way to see the identity in the outgoing "From" field is to go to Preferences, then click on Accounts, and look there; or send oneself a test email. Both of which are a hassle and should be unnecessary.
In case you're curious as to why I want to see my outgoing "From" header field:
I have several different "personas" online, each of which uses a different email address: My work address (with a work-related domain); my family/personal address (with a different email address than my work address); an online avatar I use in various gaming sites (also with its own address, since I don't want to use my personal name/address in the gaming community); and so on. However, I have all incoming emails to all accounts auto-forwarded to the same central email account. Most of the time I'm just replying to business emails, so my outgoing "Full Name" and "Email Address" (in Preferences>Accounts) are generally set to my business name and address; but on occasion when I want to reply to a non-business email and not have the recipient see my business email address, I go in to Preferences>Accounts and change "Full Name" and "Email Address" (i.e. what is displayed to the user) to something different. And when I'm done with that, I change it back to my business address.
However, sometimes I forget if I've changed it back or not, or forget what I've changed it to. In Eudora, All one needed to one was create a new outgoing email and it would display the "From" field so I could instantly see my outgoing identity. But in Mail, there is no "From" field in outgoing emails, so I'm constantly nervous and wondering which outgoing identity I may have changed to and accidentally forgotten to change back from.
(Yes, yes, I know that if a recipient wanted to be snoopy, they could look at the "full headers" of any incoming email and see the name of my email server, which may different from my displayed email address; but we're not talking about spy-stuff here, I'm just trying to not confuse people and keep business separate from personal.)
So: is there any way for me to see the outgoing "From" field in the emails I send? Or am I condemned to constantly (and mostly unnecessarily) checking "Preferences>Accounts" to see what I have enetered there?

Thanks for replying.
What is the "compose window" to which you are both referring? I could find no reference to such a thing in the Mail menus or Help.
Do you mean the "Composing" pane in the Preferences? I don't see what either one of you is referring to there, but I did notice there something that could function as an awkward workaround: If I click on the "Automatically CC myself" box in Preferences>Composing, then when I start a new email, my email address is displayed in the "CC" field -- and luckily, Mail allows me to then delete my email address out of the CC field, so I don't have to spam myself with duplicate copies of all my emails. This way, I can at least briefly see what email address I'm using, before I delete it from the CC field. Pretty awkward and unnecessarily laborious, however -- still not a perfect solution.
Or, by "composing window," are you referring to an outgoing email? As I said in my original comment, I do see what Ernie called "a small box with lines and an arrow at the bottom left of the header box." This is what I had to say about it:
+"In the "Customize..." button to the left of the Subject field in outgoing messages, one has the option to add as default outgoing message fields "cc," "bcc," "Reply-To," and "Subject," but none of those are what I want. It allows one to also view the address of the mail server, but that also is not what I'm looking for. What I want is to see my outgoing email address. And nowhere is there an option in the Preferences to turn this on. (At least as far as I could tell.)"+
In other words, when Ernie says, "click the box beside From," I can't do that -- because there is no such option. That's the whole problem in the first place. If there was a "From" field beside which I could click a box to make it appear, I would have done so! But there is no "From" field in the "Customize" section of the "small box with lines and an arrow at the bottom left of the header box."
I find it completely mystifying that both of you seem to be able to see a "From" field available to be added to the header of outgoing emails, yet no such option is available to me in Mail. What possibly could be causing this? 10.6.4 is freshly installed on my machine, and Mail seems brand new and uncorrupted. And I'm using Mail 4.3, the latest version.
Are you saying that everyone else can see an option to have a "From" field in their outgoing messages, but I uniquely don't? Very very very strange.

I can no longer access Bejeweled Blitz through my facebook account. I get the message that says, "your browser sent a request that this server could not understand. Size of a request header field exceeds server limit". Help please.

I can no longer access Bejeweled Blitz through facebook. I get the message, "your browser sent a request that this server could not understand. Size of a request header field exceeds server limit". I can access Bejeweled through FB using my husband's log in so to me that suggests the problem is with my log in. Help please.

Contact FB or use another browser.

Cannot retrieve my e-mail "browser sent request server could not understand. Size of request header field exceeds server limit"

Upgraded to Firefox 5.0.1 yesterday. No, after logging on to firefox, which takes me to my comcast page and when I try to get
my e-mail I get this message "your browser sent a request this server could not understand. Size of request header field exceeds server limit" Then it says something about "cookies" I also tried to connect to other sites and get similar messages. Just to let you know I am not a guru, and 80 years old, but I did not have this problem with the previous version. Question, why are the headers repeated? Could that be the problem???

This issue can be caused by corrupted cookies.
Clear the cache and the cookies from sites (e.g. comcast) that cause problems.
"Clear the Cache":
* Firefox > Preferences > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Firefox > Preferences > Privacy > Cookies: "Show Cookies"

Making a header field as non editable while creating PO using ME21n

Hi Friends,
Could any one tell me the BADI or screen exit to make a header field (for eg: EKGRP - Purchasing Group) as non editable after giving default value to it?
Thanks in advance,
Ram

Hi Ram,
goto se80 t-code and give 'ME' package, and now see the enhancements available.
You l get a relavent one, if you go through all those.
Hope this helps
Regards,
Sujatha

PPCO0007 User Exit for Changing Header Fields During Order (CO40)

.. Hi !!!!
I need your help or suggestions,
I need to change the standar order before to save, i found the user exit PPCO0007,
i assign the new value for the order, but when finish the fuction, EXIT_SAPLCOZV_001, the new values are
lost, and finally the system set the standard order.
Someona know how can change the order and the the batch.
Thanks
Noemí Huerta

Hi Noemi
You can use the enchancement PPCO0007 (exit when the production order is saved).
Use the function module EXIT_SAPLCOZV_001 (User Exit for Checking or Changing Header Fields During Order Save) to update the field priority starting the information in the material-customer info record.

BADI-User exit required for updating Purchase order header field -IHREZ

Hello All,
We have requirement in our business to update the purchase order header field "our reference" EKKO-IHREZ with some text field. We need a BADI/user exit that can be used for updating this field . We have checked the BADI ME_PROCESS_PO_CUST and unfortunately we are not able to use this BADI as it getting triggered in enjoy SAP transactions ME21N , ME22N etc. We are not creating the purchase order manually and we are using ME59N for creating Purchase order . Hence we are looking for some user exit/BADI that can be used in ME59N for updating the purchase order header field IHREZ.
Thanks in advance for your immediate response .
With regards,
Joseph Anand B

TRY using the exist u2022 EXIT_SAPLME59_001
You can also later on add this field by BAPI_PO_CHANGE

JMS header fields

Similar Messages

Maybe you are looking for