JMS like content conversion in Seeburger

Hi,
Can you have JMS like content conversion in Seeburger?
In Seeburger adapter if username/password is used, instead of public private keys, can you use JMS like content conversion in Seeburger. (the one which you specify as module parameters)
Regards,
Anirudh.

Depending on what solutions you have: you may use seeburger bic module to convert from csv to xml or other formats. best thing usually is to follow the 2 step mapping strategy of seeburger where bic is doing a non-xml<->xml conversion and the target (XML-) format is mapped to in the SAP Message Mapping.

Similar Messages

JMS Adapter Content Conversion

Hi,
I am looking for some help on JMS Receiver content conversion, to put a delimited file on MQ series queue.
I tried the below link, but not able to access the document.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/3.0/how to use the content conversion module with the xi 3 j2ee jms adapter
If anyone has a copy of the pdf document on JMS content conversion, could you please email it to me at my id : [email protected]
Rgds
R Chandrasekhar

I had send the required PDF
Regards
Arpit seth

Ignore record in JMS sender content conversion

Hi,
I am using JMS sender adapter with content conversion.
In the input text file, I have to ignore the first record.
for this, in Module tab I have given parameter like this:
Plain2XML -> documentOffset -> 1
so that it will not read the first record in the text file.
But it is not working
Please suggest the right way.
Regards,
Anil.

It should be:
xml.documentSkipFirstRows
Regards
Stefan

Complex XML to Plain in JMS adapter "Content conversion module"

Hi!
I have read the document on "How To use the content conversion module with XI3.0 J2EE JMS Adapter", and it says only SimpleXML can be converted in the receiver channel.
I had hoped for a solution at least as good as in the File/ftp adapter, where complex XML can be transformed to files.
Are there plans to include complex XML conversion in the JMS adapter?
I can not use the file adapter as I need to change the file name and destination, and that can not be done by adding own module to its single module.
Any idea how I can achieve what I want?
To only way I can find, is to create a file using the file/ftp adapter, and then pick it up again and treat all the lines as the same structure (one row = one xml field). Then output this new xml message to file, using the JMS adapter and add any modules with name and destination determination.
Appreciate any help!
Regards,
Oeystein Emhjellen

Hello,
Have you tried to use an XSLT mapping within the IE?
I have, at one customer site, created a XSLT message mapping which converts the XML to a fixed length ASCII file format. I than added the XSLT message mapping as a second mapping step on the interface mapping.
In this case I was able to publish a fairly complex fixed length file format to MQ Series via the JMS adapter.
/Johan

Receiver JMS Adapter Content Conversion issue

Scenario :
R/3 -->XI -->MQ(XML2Plain)
Hi
We are using Receiver JMS Adapter to send the Message from XI to MQ.
The XML has to be converted to plain file. And Content conversion is
being done.
With the new development, the message type defined consist of 8 fields
with fixed length. The XML message goes successfully from XI to MQ
without any content conversion. But once simple content conversion is
being done for Receiver JMS adapter, even though the message is
received but its empty (without any data records). The adapter
monitoring everything seems fine and it gives the status that message
converted to binary and the message is delivered to MQ. Though on
checking the messages there is no data records.
Below is my content conversion configuration done in Module tab. Kindly
revert back what can be the problem as have done exactly the same way
as described in Content Conversion How to Guide for receiver JMS.
localejbs/AF_Modules/MessageTransformBean Local Enterprise Bean XML2Plain
localejbs/SAP XI JMS Adapter/ConvertMessageToBinary Local Enterprise Bean convert_XI2Bin
localejbs/SAP XI JMS Adapter/SendBinarytoXIJMSService Local Enterprise Bean exit
XML2Plain Transform.Class com.sap.aii.messaging.adapter.Conversion
XML2Plain TransformContentType text/plain;charset=utf-8
XML2Plain xml.addHeaderLine 0
XML2Plain xml.addHeaderLine SimpleXML2Plain
XML2Plain xml.fieldFixedLengths 8,10,10,20,40,40,8,8
XML2Plain xml.fixedLengthTooShortHandling Cut
regards.
santosh.

Hi,
check localejbs/SAP XI JMS Adapter/ConvertMessageToBinary Local Enterprise Bean convert_XI2Bin
this is not CallJMSService.
And also check the receiver Structure, if it is falt structure its ok, else
see the below link if it has the complex structure , how to handle..
See the below links
/people/alessandro.guarneri/blog/2006/01/04/jms-sender-adapter-handling-too-short-lines
/people/william.li/blog/2006/11/13/how-to-use-saps-webas-j2ees-jms-queue-in-exchange-infrastructure
content conversion
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f02d12a7-0201-0010-5780-8bfc7d12f891
Regards
Chilla..

JMS Adapter Content conversion using Webspear MQ

Hi All,
I have a scenario where I have to pick a flat file from WebSpear JMS Q.In turn I should convert flat structure into xml structure to parse to the RFC structure(YOTCS_I090_INV_S) and map to the traget structure.
Below is the Source structure:
Messages
->Message1
-->YOTCI_I090_INV_SYNC
--->YOTCS_I090_INV_SYNC
>item
>ZDATE
>TIME
>TZONE
>WERKS
>MATNR
>LGORT
>CHARG
>SOBKZ
>INSMK
>LIFNR
>ZMENGE
>ZMEINS
>LOT_NUMBER
>CODE_DATE
Source file look's as below:
YOTCS_I090_INV_S                                                                                4928
YOTCS_I090_INV_S                                                                                3
YOTCS_I090_INV_S                                                                                3
YOTCS_I090_INV_S                                                                                1
I am doing the file contact conversion as below in JMS Adapter:
Module Key      ParameterName                           ParameterValue
Plain2XML        Transform.Class                           com.sap.aii.messaging.adapter.Conversion
Plain2XML        Transform.ContentType                 text/xml;charset=utf-8
Plain2XML        xml.conversionType                      StructPlain2XML
Plain2XML        xml.documentName                      YOTCI_I090_INV_SYNC
Plain2XML        xml.documentNamespace            urn:sap-com:document:sap:rfc:functions
Plain2XML        xml.item.fieldFixedLengths           8,8,6,4,18,4,10,1,1,10,13,3,10,8
Plain2XML        xml.item.fieldNames ZDATE,TIME,TZONE,WERKS,MATNR,LGORT,CHARG,SOBKZ,INSMK,LIFNR,ZMENGE,ZMEINS,LOT_NUMBER,CODE_DATE
Plain2XML        xml.processFieldNames             fromConfiguration
Plain2XML        xml.recordsetStructure               item,*
Can any one help me in configuring the Content conversion? Hope you got my issue.
Thanks in Advance.
Best Regards,
Jose

Joseph,
Go thru the Below Link
http://help.sap.com/saphelp_nw04/helpdata/en/24/4cad3baabd4737bab64d0201bc0c6c/content.htm
Cheers
Agasthuri Doss

Receiver JMS adapter content conversion

Hi All,
Can anyone provide me guidelines on how to do content conversion for the receiver JMS adapter??
Thx
Navin

Hi,
Based on your structure , you need to configure the JMS CC parameters.
see the below link
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f02d12a7-0201-0010-5780-8bfc7d12f891
regards
Chilla

Content conversion in XI using JMS Sender Adapter.

Hi,
I have scenario where i will get fixed length flat file from MQ and i need to create an IDOC.
The flat file structure is like below.
HEADER001002003 (Occurs once)
DELIVERY0000111112222 (Min - 1 and Max - Unbounded)
Detail33333344444455555 (Min - 1 and Max - Unbounded)
NOTE -- Detail record is sub level record of DELIVERY.
I would like to do content conversion in JMS SENDER ADAPTER.
Did anybody worked on similar scenario?
I would appreciate ,if anybody provides info on how to do it.
Regds,
Jagdish.

Hi
Please have a look at these threads..u get an idea abt the content conversion.
JMS Adapter: Content Conversion
https://forumsn.sdn.sap.com/click.jspa?searchID=2171243&messageID=3319704
JMS Adapter Content Conversion
JMS Content Converrsion
Hope these help you!

JMS Adapter module content conversion

Hi,
I'm developing a module for the jms adapter(sender). My requirement is to parse the XI message(text) using some XML parsing api and do some formatting, logic etc and to make the jms adapter create a xml file with the processed information. Jms File Content Conversion does not suit our requirement and thats the reason we are trying this option.
My understanding is: Access the payload in the "process" method of the local ejb, apply XML parsing using JDOM etc, make a xml which should be the output of the jms adapter. This xml will be the xml with my user defined tag elements after content conversion. Can i form this xml and assign to the inputModuleData? Will the jms adapter use this string to create the xml and send to IS? Are there any other parameters to be set or processes to be done?
Also in which sequence should I put my adapter module in communication channel.
================================================
My code snippet:
public ModuleData process(ModuleContext moduleContext, ModuleData inputModuleData)
 throws ModuleException
 Object obj = null; // Handler to get Principle data
 Message msg = null; // Handler to get Message object
 try
 obj = inputModuleData.getPrincipalData();
 msg = (Message)obj;
 AuditMessageKey amk = new AuditMessageKey(msg.getMessageId(),AuditDirection.INBOUND);
 Audit.addAuditLogEntry(amk, AuditLogStatus.SUCCESS,"sample: Inside sample Module---efore reading payload");
 try
 XMLPayload xmlpayload = msg.getDocument();
 String messageStr = xmlpayload.getText();
 String inputStr = null;
 String tags[] = new String[2];
 String values[] = new String[2];
 Audit.addAuditLogEntry(amk, AuditLogStatus.SUCCESS,"sample: Inside sample Module---before content conversion");
String tagvalue1 = messageStr.substring(messageStr.indexOf("BEGIN+"), messageStr.indexOf("'");
String tagvalue2 = messageStr.substring(messageStr.indexOf("'"), messageStr.lastindexOf("ENDING");
 tags[0] = "tag1";
 tags[1] = "tag2";
 values[0] = tagvalue1 ;
 values[1] = tagvalue2 ;
 Audit.addAuditLogEntry(amk, AuditLogStatus.SUCCESS,"sample: Inside sample Module---after content conversion");
 Document xmldoc = null;
 DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
 DocumentBuilder builder = factory.newDocumentBuilder();
 DOMImplementation impl = builder.getDOMImplementation();
 org.w3c.dom.Element e = null;
 Node n = null;
 xmldoc = impl.createDocument(null, "MT940", null);
 org.w3c.dom.Element root = xmldoc.getDocumentElement();
 for(int i = 0; i < tags.length; i++)
 e = xmldoc.createElementNS(null, tags);
 n = xmldoc.createTextNode(values);
 e.appendChild(n);
 root.appendChild(e);
 Audit.addAuditLogEntry(amk, AuditLogStatus.SUCCESS,"sample: Inside sample Module---before dom creation");
 DOMSource domSource = new DOMSource(xmldoc);
 ByteArrayOutputStream myBytes = new ByteArrayOutputStream();
 Result dest = new StreamResult(myBytes);
 TransformerFactory tf = TransformerFactory.newInstance();
 Transformer serializer = tf.newTransformer();
 serializer.setOutputProperty("indent", "yes");
 serializer.transform(domSource, dest);
 Audit.addAuditLogEntry(amk, AuditLogStatus.SUCCESS,"sample: Inside sample Module---before setting principal data");
 byte[] docContent = myBytes.toByteArray();
 if (docContent != null) {
 xmlpayload.setContent(docContent);
 inputModuleData.setPrincipalData(msg);
 Audit.addAuditLogEntry(amk, AuditLogStatus.SUCCESS,"sample: Inside sample Module---after setting principal data");
 catch(ArrayIndexOutOfBoundsException e)
 e.printStackTrace();
 catch(StringIndexOutOfBoundsException e)
 e.printStackTrace();
 catch(TransformerException e)
 e.printStackTrace();
 catch(Exception e)
 e.printStackTrace();
 catch(Exception e)
 ModuleException me = new ModuleException(e);
 throw me;
 return inputModuleData;

This is for sender channel. The doubt in adapter module is in the process block how will I get the main data being read by the jms adapter from the text file.As I am reading text file from websphere MQ, the content of the text file can be obtained thru xmlpayload.getText() or is there any other way.
obj = inputModuleData.getPrincipalData();
msg = (Message)obj;
XMLPayload xmlpayload = msg.getDocument();
String messageStr = xmlpayload.getText();
At present I am using my adapter module before call sap adapter, but before sap adapter there are two other modules(toBinary and to Xmb), so shld I place it before both or after both the modules.
Thanx in advance
Rachit

Content Conversion in JMS Adapter

Hi All,
I am having a scenario JMS - XI - JDBC.
Now I have to do the content conversion in the incming records.
The sample incoming data is as follows:-
<Field1>,<Field2>, ...,<Fieldn> -->Row1
{<Field1A>,<Field2A>, ...,<FieldnA>} -->Row2
{<Field1A>,<Field2A>, ...,<FieldnA>} -->Row3
<Field1B>,<Field2B>, ...,<FieldnB> -->Row4
{<Field1C>,<Field2C>, ...,<FieldnC>} -->Row5
{<Field1C>,<Field2C>, ...,<FieldnC>} -->Row6
{<Field1C>,<Field2C>, ...,<FieldnC>} -->Row7
Now at the target, we have 3 oracle tables, in which the data from the Row1 &4 will go to Table 1, Row2&3 --> Table2 and Row5,6 &7 --> Table3.
The source data type that i m using is of the structure:-
<TC>
<GT>
 <Field1>
 <GS>
 <Field1A>
 </GS>
 <Field1B>
 <Field2B>
 <GDS>
 <Field1C>
 </GDS>
</GT>
</TC>
Please help me out in the modules configuraton, how this can be handled.
Thanks in advance, hope to receive some solution at the earliest.
Rocky.

Hi Rocky,
Please have a look at these threads..
JMS Adapter: Content Conversion
JMS Adapter Content Conversion
JMS Content Converrsion
Hope these help you!
cheers,
Prashanth

MQ Message content conversion using JMS

I want to use JMS content conversion to convert MQ messages into XML (Idoc). We currently use the R/3 link application to send data to/from MQ to SAP.
Each MQ message is one continuous stream of data with no carriage returns or line feed between the header and lines. When I set-up the JMS mapping commands, it sees the message as one string of data and does not map out the separate idoc segments. Can I use JMS file content conversion or will I need some type of JAVA mapping module to handle the mapping for each different type of Idoc segment? If it;s JAVA, could you provide an example. Thanks Jim

Hi Jim,
Go through the following link which disscusses the JMS Content Conversion.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f02d12a7-0201-0010-5780-8bfc7d12f891
Amaresh

Content conversion in Sender JMS Adapter

Hi,
Scenario is file to IDoc
My source file is   ' ; ' separated file coming from MQ via JMS adapter. now I need to convert this to XI.
Source DT looks like
Root
HEADER (Occurance 1)
     Field 1
     ISOCURCD
     TRANKODE
     IDENTIFIER
     DATO
     TIME
DETAIL(Occurance 1 to unbounded)
     ISOCURCD
     TRANKODE
     EFFDATE
     COMMDATE
     DKKVAL1
     USDVAL1
TRAILER(Occurance 1)
     ISOCURCD
     TRANKODE
      TRANCOUNT
According to How to use content conversion in JMS guide from SDN i have configured the content conversion parameters in the module of JMS sender adapter.
In the processing sequence given the module name as localejbs/AF_Modules/MessageTransformBean and module Key as Plain2XML.
And in module configuration
Parameter Name                      Parameter Value
Transform.Class                          com.sap.aii.messaging.adapter.Conversion
Transform.ContentType                     text/xml;charset=utf-8
xml.keyFieldName                          TRANKODE
xml.keyFieldType                          CaseSensitiveString
xml.recordsetName                          Root
xml.documentName                                   MT_ROOT
xml.documentNamespace                          http://XXX.XXX.XX/xi/XXXXX
xml.processFieldNames          fromConfiguration
xml.conversionType                                   StructPlain2XML
xml.recordsetStructure          HEADER,1,DETAIL,*,TRAILER,1
xml.HEADER.fieldNames           Field1,ISOCURCD,TRANKODE,IDENTIFIER,DATO,TIME
xml.HEADER.fieldSeparator                     ";"
xml.HEADER.keyFieldValue                     H
xml.fieldSeparator                                      ";"(if i don't use this then the file is not being picked and getting an error in the CC monitoring of RWB saying xml.field separator missing.)
Similarily for Detail and Trailer records as well.
But when I run the scenario, the file is being picked up but I am not getting any payload into the inbound message.
Can you please help me where I have configured wrongly. And one more thing will this configuration help for ; separated file .
Thanks & Regards,
Kumar
Edited by: Kumar on Dec 19, 2007 11:11 AM
Edited by: Kumar on Dec 19, 2007 11:15 AM

HI,
Have you gone through the below pdf i think it will help to find ur mistake.
How to use conversion modules in JMS - https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f02d12a7-0201-0010-5780-8bfc7d12f891
Thnx
Chiarg

Content Conversion module in JMS Adapter - MessageTransformBean

Hi All,
We are using Content Conversion module using MessageTransformBean in JMS adapter to read a flat file from MQ Queue.It works fine and the file is getting picked and successfully converted into a xml structure in XI.
The flat file is multiple line file with each line as one xml record.But the xml structure after conversion has only one record in it.So we end up getting multiple messages each with one record instead of ONE xml structure with multiple records in it.
Could I know why I am not getting multiple records in one xml structure as expected.
Do I need to change xml.structureTitle as MyTitle,* or should I put something endSeparator like we do in File Content Conversion.
Any Help appreciated.
Thanks,
V
Edited by: CollinsV on Aug 9, 2010 6:28 AM
Edited by: CollinsV on Aug 9, 2010 6:36 AM
Edited by: CollinsV on Aug 9, 2010 6:38 AM
Edited by: CollinsV on Aug 9, 2010 6:39 AM
Edited by: CollinsV on Aug 9, 2010 6:56 AM

Thanks Shabarish .I did follow the same document , but the xml is not converted as multiple records in it .we are getting only one xml message for each record in the file .
The xml structure we are getting :
<ns:MyDocument xmlns:ns="http://xi.com/test">
<MyTitle>
<field-name1>111</field-name1>
<field-name2>222</field-name2>
<field-name3>333</field-name3>
</MyTitle>
</ns:MyDocument>
We need onle one xml message instead as below.
<ns:MyDocument xmlns:ns="http://xi.com/test">
<MyTitle>
<field-name1>AAA</field-name1>
<field-name2>BBB</field-name2>
<field-name3>CCC</field-name3>
</MyTitle>
<MyTitle>
<field-name1>111</field-name1>
<field-name2>222</field-name2>
<field-name3>333</field-name3>
</MyTitle>
</ns:MyDocument>
Any Help ...
Thanks
V

Sender JMS Content Conversion - How to process multiple records

Hi All,
I use a Sender JMS Channel with Content Conversion.
My message structure is like this
<root>
<rec> </rec>
<rec> </rec>
</root>
I have fixed length flat file with multiple records.
i have given the parameters FixedFieldLength, FieldNames and StructureTitle.
Which parameter i need to use specify the RecordDelimiter
Because my input file will have more than record
my input file -
xxxx
yyyy
if i dont specify any delimiter value, in the module parameter,then for each newline of the file, a new mesage is created.
<root>
<rec>xxxx</rec>
<root>
<root>
<rec>yyyy</rec>
<root>
But i want the output to be like this
<root>
<rec>xxxx<rec>
<rec>yyyy</rec>
</root>

hi,
You can do your FCC for sender JMS by going through page 5 of this document.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/50061bd9-e56e-2910-3495-c5faa652b710

JMS content conversion issue

Hi ,
I am facing issue in JMS content conversion
my file looks like as below...
field1¤field2¤
field1¤field2¤
field1¤field2¤
field1¤field2¤
in module i have used this
AF_Modules/MessageTransformBean PLAIN2XML
Transform.Class com.sap.aii.messaging.adapter.Conversion
Transform.ContentType text/xml;charset=utf-8
xml.conversionType SimplePlain2XML
xml.documentName MT_data
xml.documentNamespace http://xyz.com
xml.fieldNames field1,field2
xml.fieldSeparator ¤
xml.processFieldNames fromConfiguration
xml.structureTitle records
but i am getting following error
Error occurred while processing message: . Detailed error (if any): com.sap.aii.adapter.jms.api.channel.filter.MessageFilterException: Transformer Conversion3.0.5226 Error initializing Class: java.lang.Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: (4408) Parameter xml.fieldFixedLengths or xml.fieldSeparator is missing (4409) Consistency check: no. of arguments in xml.fieldFixedLength does not match xml.fieldNames (0 <> 2) : TransformException: Transformer Conversion3.0.5226 Error initializing Class: java.lang.Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: (4408) Parameter 'xml.fieldFixedLengths' or 'xml.fieldSeparator' is missing (4409) Consistency check: no. of arguments in 'xml.fieldFixedLength' does not match 'xml.fieldNames' (0 <> 2)
ironically when i use file adapter, its reading the file properly and converting XML as expected?
Did anyone face this issue.....
is this issue because of an extra ¤ .. is so... why its not giving issue with File??

You need an additional hierarchy level:
root
-> row
-> data
In your example:
<?xml version="1.0" ?>
<ns1:HQ_reply_MT xmlns:ns1="urn:abc.com:HQToSAP">
<row>
<Data1> PIPXSDI3070 00000 00342YSDI3070PROCESS_MQSERIES HQXPLOR10 XPLOR.ORDER.RESULTS 0000 000000000000000086312 Invalid Process flag : 2. 065</Data1>
</row>
</ns1:HQ_reply_MT>
Regards
Stefan

JMS like content conversion in Seeburger

Similar Messages

Maybe you are looking for