JMS server shuts down when quota_threshold reached

Hi,
Using weblogic 10.3.2. We are using WLS JMS Queues and are having the below issue. We are using filestore as a persistence during peak times huge number of messages are queued and the space on the disk gets filled up where no more messages are able to be persisted but some how WebLogic keeps accepting the messages and we end up restarting the servers to make sure messages starts getting processed. Is there a way if the space on the disk gets full we don't accepts any messages in the queues and once the space gets available start accepting the messages over again. Is there any out-of-the-box functionality available that it automatically detects this kind of behavior and WLS JMS to stop eccepting the new messages till have enough space.
<There was a failure while performing paging I/O
weblogic.messaging.kernel.KernelException: Error writing messages for paging
at weblogic.messaging.kernel.internal.PagingImpl.performPagingIO(PagingImpl.java:578)
at weblogic.messaging.kernel.internal.PagingImpl.run(PagingImpl.java:488)
Caused By: weblogic.store.PersistentStoreException: [Store:280019]There was an error while writing to a file store file
at weblogic.store.io.file.Heap.multiWrite(Heap.java:479)
at weblogic.messaging.kernel.internal.PagingImpl.performPagingIO(PagingImpl.java:576)
at weblogic.messaging.kernel.internal.PagingImpl.run(PagingImpl.java:488)
Caused By: java.io.IOException: Error writing to file, No space left on device, errno=28
at weblogic.store.io.file.direct.DirectIONative.write(Native Method)
at weblogic.store.io.file.direct.DirectFileChannel.write(DirectFileChannel.java:173)
at weblogic.store.io.file.StoreFile.write(StoreFile.java:255)Thanks

Thanks for the info but the question is how do I know what quotas to set. So the one getting the above error weblogic jms should stop taking any messages until there's enough space available. As currently it keeps accepting the messages and we den up restarting the servers.
Currently under JMS Server configurations everything is set to -1 and in connection factory timeout is set to 10 ms.
Thanks

Similar Messages

Server Shutting down, when the Concurrent Users are more

Hi,
We are working on EP 5.0 SP5, our problem is that if the concurrent users are more automatically our LDAP or Portal is shutting down (approximately 300 or above..).
For this problem where we have to check? help can be appreciated...
Regards,
Sudhir

Hi,
If you portal is shutting down when it is getting a high load I would look at the memory settings defined in the configtool (if you are using a service or the startupframework) or the go.bats if you are running them manually. I would assume that the problems comes from the java process not being able to get enough memory, so try increasing the heapsize parameter Xmx (?)
See notes
597187
696410 (for EP6 but content and related notes should be relevant)

Web server shuts down when I start it, and starts when I shut it down

I have an Xserve runing 10.8.4 and Server.app 2.2.1
I've been messing around, trying to get django to work, and now I appear to have done a bad thing.
When I flip the switch (or run sudo sudo serveradmin start web) in Server.app from OFF to ON, whilst running a tail -f on /var/log/apache2/error_log, I see this:
[Wed Jun 26 16:31:44 2013] [warn] NameVirtualHost 10.5.1.6:80 has no VirtualHosts
[Wed Jun 26 16:31:44 2013] [notice] Apache/2.2.22 (Unix) PHP/5.3.15 with Suhosin-Patch mod_wsgi/3.3 Python/2.7.2 mod_ssl/2.2.22 OpenSSL/0.9.8x DAV/2 configured -- resuming normal operations
and when I flip the switch from ON to OFF (or sudo serveradmin stop web) I see this:
[Wed Jun 26 16:32:01 2013] [notice] caught SIGTERM, shutting down
um... so everything is backwards.
anyone have any idea what I did?

Maybe I'm missing something...
"When I flip the switch (or run sudo sudo serveradmin start web) in Server.app from OFF to ON:
[notice] Apache/2.2.22 (Unix) PHP/5.3.15 with Suhosin-Patch mod_wsgi/3.3 Python/2.7.2 mod_ssl/2.2.22 OpenSSL/0.9.8x DAV/2 configured -- resuming normal operations
So Apache starts up (true, you have a configuration error, but that's a different issue.
Conversely:
and when I flip the switch from ON to OFF
[notice] caught SIGTERM, shutting down
So it shuts down. That doesn't match your original premise, so what's the issue?

Macbook pro shuts down when battery reaches 90%

Ever since I installed iOS, both my Macbook Pros have started showing the same strange behavior. On battery power, they suddenly shut down even when there is still supposedly plenty of power left. Last night one of them (the newer one) shut down at 90%. the other shut down at 75%. Any ideas?

I really hope that sig doesn't work for Apple Support... or at least he doesn't anymore.
Allan, sometimes people make mistakes speaking technical words, specially if those are Apple achronims. What differentiates a good answer from a waste of time is when one makes an effort to understand what the other is trying to say and gives a potential solution.
However drmezan, has wasted his time with you two explaining his problem until he got the question corretly formulated, and when at last he manages the way you like it... none of you reply... is this a joke?
Are you kidding people here or what?
drmezan:
I'm suffering the same situation here, however if I plug it to the power supply it doesn't shuts down.
Would it be related to the temperature ? It's true that my Mac Book Pro gets really hot quite quick, but it only turns off suddently when running on battery.
Any help would be appreciated.
Thanks.

Application server shuts down when solaris terminal closes

I'm running the latest version of solaris and have Glassfish v2 installed. I use the solaris terminal to navigate to the startup scripts and start the appserver... it starts up fine. For whatever reason, when I now close the terminal window, the appserver shuts down. Is this normal? How can I avoid this?
Thanks

some of that may be up to the application and how it can be started. im not familiar with this so if you have the doc for it handy, take a look at it looking for running as a daemon or service.

If the JMS server is down......

If the JMS Server is down when the java application client is sending a message to the server, how can I save this message in order to send it when the server has restarted?
If you have some good solutions, please tell me and we can discuss them! Thanks......

Your solution depends a lot on the JMS provider you're using. Some providers support clustering, such that your client will transparently send to which ever server in the cluster is available. However, clustering in a messaging system typically has different semantics than what you might be used to (or expect). You need to carefully study your provider's documentation to see if it fits your requirements.
Your provider might also support message routing. Then you can use a local server, which resides on the same machine as your client. The local server will forward to a remote server when ever that server is available. This is basically store and forward. Some providers allow you to start the server in-process with the client, so you get store and forward where's it's guaranteed that if the client is up so is the server.
- Bjarne.

My iPhone automatically shuts down when the battery reaches 50%. How can I resolve it?

My iPhone 4 iOS 7.0 automatically shuts down when the battery charge reaches 50%. Is it a battery problem or is it the phone?

Thanks, you're a life saver. Here is the report:
AC Power:
System Sleep Timer (Minutes): 10
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 10
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On LAN: Yes
Display Sleep Uses Dim: Yes
Battery Power:
System Sleep Timer (Minutes): 10
Disk Sleep Timer (Minutes): 180
Display Sleep Timer (Minutes): 2
Wake On AC Change: No
Wake On Clamshell Open: Yes
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
Battery Information:
Battery Installed: Yes
First low level warning: No
Full Charge Capacity (mAh): 3004
Remaining Capacity (mAh): 2994
Amperage (mA): 0
Voltage (mV): 12385
Cycle Count: 41
AC Charger Information:
Connected: Yes
Charging: No
Hardware Configuration:
UPS Installed: No

Activation server shut down for Creative Suite 2, Acrobat 7, and Macromedia products

Effective December 13, Adobe disabled the activation server for CS2 products and Acrobat 7 because of a technical glitch. These products were released over 7 years ago and do not run on many modern operating systems. But to ensure that any customers activating those old versions can continue to use their software, we issued a serial number directly to those customers. While this might be interpreted as Adobe giving away software for free, we did it to help our customers.
If your software is affected by the activation server shut down then you will receive an error that the Activation server is unavailable. The specific affected products are as follows:
Acrobat 7.0 - Windows
After Effects 7.0
Audition 3.0
Captivate 1.0
Contribute 2.0
Contribute 3.0
Creative Suite 2.0
Director MX 2004
Dreamweaver MX 2004
Fireworks MX 2004
Flash Paper 2.0
Freehand MX
GoLive CS2
GoLive 9.0
Illustrator CS2
InCopy CS2
InDesign CS2
Macromedia Studo MX 2004
Photoshop CS
Photoshop CS2
Photoshop Elements 4.0
Photoshop Elements 5.0
Premiere Pro 7.0
Production Studio Premium
The activation server being shut down will not affect currently installed and activated Adobe software. You will only face this difficulty if you need to reactivate the software.
To remedy this difficulty we have made available a version of these software titles that does not require activation for Users who have previously purchase the affected software. For additional details and specific links to the software please see:
Error: Activation Server Unavailable | CS2 products, Acrobat 7 - http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.html
Error: Activation Server Unavailable | Macromedia branded products - http://helpx.adobe.com/x-productkb/policy-pricing/macromedia-legacy-activation-error.html
If the software title you have purchased is affected by the activation server being shut down, but is not available for download in the previously referenced pages, then please contact our support team at http://www.adobe.com/support/chat/ivrchat.html. Please be aware our support team will not be able to provide assistance for downloading or installing the Creative Suite 2 software.
System requirements
Creative Suite 2 software was only designed to run in the following operating environments:
Mac OS X v.10.2.8–v.10.3.8. PowerPC® G4 or G5 processor
Microsoft® Windows® 2000/Windows XP. Intel® Pentium® III or 4 processor
Extraction instructions
If you are receiving a message to insert disc two please see the following extraction instructions:
In the English version of the software the file CreativeSuiteCS2Disc2 extracts to C:\Creative Suite\Adobe Creative Suite 2.0\. CreativeSuiteCS2Disc1 and CreativeSuiteCS2Disc3 both extract to C:\Creative Suite CS2\Adobe Creative Suite 2.0\.
Please copy the contents of the C:\Creative Suite\Adobe Creative Suite 2.0\ folder to the C:\Creative Suite CS2\Adobe Creative Suite 2.0\ folder and you will no longer be prompted to insert disc two.
Additional information
Some Users have reported success getting Creative Suite 2 to install under Windows 7 64-bit. Please see http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/windows-7-is-n ot-compatible-with-adobe-photoshop/6f1b4955-7166-4b8f-ad9b-5d19150f803f for more information.
Still facing installation difficulties?
If you are experiencing an installation issue with the software currently available I would recommend creating a new thread in the Downloading, Installing, and Setting up forum - http://forums.adobe.com/community/download_install_setup. If you can please make sure to include the following:
•          What software are you trying to install?
•          Which operating system are you using?
•          Was the software previously installed prior to downloading the non-activating version currently available?
•          What specific error messages are you receiving when trying to install?
Please also see the original discussion on this topic at http://forums.adobe.com/message/4919014#4919014.

Hello Jeff.
EN version is not so eaqual in all with CZ version, I have PREMIUM one, not Standard.
So I download these EN versions and Acrobat 7Pro separately.
It look that it works, I have it installed on my presentation laptop. I ussualy work on PC and laptop is for bussines trips mostly.
When I was working on my PC I found in menu one interesting option. I have installed CS2 in 2010 so it works OK, still in CZ. What I found in menu is called "Licence Transfer".
I didnt try it because I dont want to loose my activation on PC, but could you please say to me what does this option means?
Is it possible to copy licence on flash disk and use it on laptop, but it still be in PC also? Or it is only for deactivation, so you will loose it, and after this you can do new activation (which is impossible by server shut down)?
And one question to the end, if I buy some later version like CS4 or CS5 (from some graphic studio which have one licence to sell-transfer) so do Adobe plan to shut down server too, for CS4, CS5 or after this non user/customer friendly solution (I mean for CS2) will Adobe do some application which we can install on our local PC and this app will say to CSxx "Your licence is OK, just continue in work" ?? --- this would be much better, I think if Adobe do this so it will be the same like no-activation versions in EN only but without so many complains and impacts on your customers.
Thank you for reply me

Re: Activation Server shut down for Creative Suite 2, Acrobat 7 and Macromedia products

Software : Adobe Encore DVD 2.0 / UK, purchased october 24, 2006
Operating system : Windows XP home edition / SP3 Computer : Pentium 4 / 1,8GHz - 512 MB
Other software : Adobe Premiere 6.5 / Photoshop Elements 5.0 / QuickTime 7, etc.
My harddrive crashed and I lost all my software. I had to reinstall. Everything is okay now but when I activate Encore DVD 2.0, I get the message "Activation server shut down for ........." I searched for the free download (without activating) of the CS 2 Premium, but I cold not find it. I only found the normal CS 2.
Who can help me.

If what you want is not at this link, http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l that would indicate that Adobe did not provide a special version

App server shut down

Hi
does anybody knows why when i start app server 9 from console by typing .
./adadmin start-domain domain1
it runs fine, but if i close console app server shut down??
i'm using solaris 10 on ultra20, but same problem on sunfire v100
is there any way to make sun app server permanent?
Regards

For exploaded war files use following context parameters in web.xml
// For servlet reload
weblogic.httpd.servlet.reloadCheckSecs
// For JSP reload
weblogic.jsp.pageCheckSeconds
Example:
<context-param>
<param-name>weblogic.httpd.servlet.reloadCheckSecs</param-name>
<param-value>10</param-value>
</context-param>
Viresh Garg
Principal Developer Relations Engineer
BEA Systems
marshalli wrote:
I set 
weblogic.httpd.webApp.tc=e:/weblogic/myserver/testWapp 
in my weblogic.properties 
But I must shut down my server for each time I change jsp file 
Otherwise, it will read old jsp file from tmp 
where can I setup for weblogic 
to reread a new jsp file with shut down? 
Thank a lot

Shuts down when I save any file big or small

I have Adobe CS5 and run it on a MacBookPro and recently AI started shutting down when I try to save a file. I tried to create a small mock file to save and it did the same thing. SO no matter the size of the file it just shuts down. I also restarted my computer and made sure I had nothing else open and it still does the same thing. Need Help, can't finish my work with out it!!!

So...I deleted all printers attached to my computer thru the server and it still wouldn't let me save as an ai. file. But I tried to save as an .eps file and it let me. Before it wouldn't let me save matter the extension. Would you have an idea why it wouldn't save the ai. file and shut down?

Imovie shuts down when I click to Export Movie, share or finish project.

Imovie shuts down when I click to Export Movie, share or finish project.
I have upgraded RAM Memory cards from 4 to 8 GB and cleaned away the soft wear and files I do not need.
The movie is in HD and about 25 min long.
The "Problem Info" says:
Process:         iMovie [1190]
Path:            /Applications/iMovie.app/Contents/MacOS/iMovie
Identifier:      com.apple.iMovieApp
Version:         9.0.2 (1099)
Build Info:      iMovieApp-10990000~3
Code Type:       X86 (Native)
Parent Process: launchd [102]
What is there to do?
/Nicco

Hello there, averypamby.
The following Knowledge Base article offers up some great information in regards to sharing/exporting your video in Motion:
Motion 5: Export a QuickTime movie
http://support.apple.com/kb/PH16623
Export your project as a movie file
Choose Share > Export Movie (or press Command-E).
Choose an export format from the Export pop-up menu.
This menu provides a list of codecs.
Choose an option from the “Open with” pop-up menu:
Do Nothing: The movie is not opened after the export is completed.
Open with QuickTime Player: The movie is opened in QuickTime Player.
Open with Compressor: The movie is opened in Compressor (if installed on your system).
Choose an option from the Include pop-up menu: Video and Audio, or Video Only.
If you’ve set In and Out points in the Timeline, use the Duration pop-up menu to choose whether to export the sequence or the portion between the In and Out points.
To specify additional Motion-specific options, click Render.
For more information about options available in the Render pane, see Render settings.
To see details about the file to be output, click Summary.
Click Next.
Enter a name and choose a location for the exported file, then click Save.
Motion renders and saves your movie.
Important:    The Export Movie command does not use background rendering, so you must wait until rendering is finished before you can continue to work in Motion.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Iphone 4s shuts down when it battery life gets to about 17%. prior to IOS 7 it would shut down at about 1%. What's up? (Oh, when I plug in recharge, the battery indicates it's at 17% or so. So, I'm not referring to battery drain).

My iPhone 4s shuts down when battery indicater reaches about 17%. When I recharge, indicater shows about 17%, so apparently this isn't fast battery drain. Oh, this happens since IOS7.

See if your phone is one that Apple has noted as requiring a replacement battery: https://www.apple.com/support/iphone5-battery/
~Lyssa

Macbook shuts down when plugged

I have my macbook for 2 years, and last month it started to behave in a weird way.
First when I let the battery drain out it shuts down when the battery reaches around 2-3%, it doesn't go into deep sleep. I've checked the battery capacity and it's around 2852mAh, and the check battery sign just started to pop. I'll probably have to buy a new battery. (That doesn't bother me much, because I use it mainly plugged on power.)
But last week it has gotten worse, now my macbook started to shut down when it's plugged. It takes a minute so I can reboot it (not even the battery indicator works for a while), and the charger stops working right after it's off. I'm using a new 85w charger (the old one got ripped off), because they don't sell the 65w here in Brazil. Needless to say I've tried do reset the SMC, PRAM, NVRAM.
Ps: On january I upgraded my RAM with some used module I got from buddy of mine.
Pps: You should know that there's no apple store in Brazil. Don't tell me to ask the genius :P

I took my macbook to a apple technical support provider, and they're replacing my charger. I wonder if the faulty charger could have damaged my battery, the check battery sign first appeared after the shutdowns caused by the charger.

Suddenly WebLogic Server shutting down while doing testing

Hi All,
While we doing testing weblogic server shutting down.Here is the log generated by weblogic.
Tue Aug 22 12:38:27 EDT 2000:<E> <ListenThread> Listen failed. Failure count: 1
Tue Aug 22 12:38:27 EDT 2000:<E> <ListenThread> ListenThread:run failed:
Tue Aug 22 12:38:27 EDT 2000:<E> <ListenThread> **** The WebLogic Server is no longer listening for connections.
Tue Aug 22 12:38:27 EDT 2000:<E> <ListenThread> **** You should probably restart it.
Tue Aug 22 12:38:27 EDT 2000: <WebLogicServer> Server shutdown by system
Tue Aug 22 12:38:27 EDT 2000: <WebLogicServer> Server shutdown commencing NOW
Tue Aug 22 12:38:28 EDT 2000: <HTTP> Destroying servlets in default servlet context.
Tue Aug 22 12:38:28 EDT 2000:<E> <SSLListenThread> ListenThread:run failed:
Please let me know the reason for this.It's very very urgent.
Thanks
Venkat

See case #188305. There is not a whole lot of information there and we really don't like to reproduce this.
If it happens again we will add more info to the case. In the log file we have seen 'class not found' for
weblogic.utils.... classes before it shuts down. Boot it again under no load and it comes up fine.
Mike.
Kumar Allamraju <[email protected]> wrote:
Hmm.. that's interesting.
What version of WLS, SP-level? what 's the avg load that you are putting on WLS? Is it in a clustered environment? what
the min/max heap size, executeThreadCount etc...
Any other details that you can provide us would be helpful for us to debug further.
Kumar
Michael Reiche wrote:
Kumar -
We have seen this as well when load testing. It's hard to ignore the WL server shutting down by itself for no reason.
Mike Reiche
Kumar Allamraju <[email protected]> wrote:
You will only see this, if WLS shutdown is commenced and if you try to PING the server.
you can safely ignore it.
Kumar
Venkat wrote:
Hi All,
While we doing testing weblogic server shutting down.Here is the log generated by weblogic.
Tue Aug 22 12:38:27 EDT 2000:<E> <ListenThread> Listen failed. Failure count: 1
Tue Aug 22 12:38:27 EDT 2000:<E> <ListenThread> ListenThread:run failed:
Tue Aug 22 12:38:27 EDT 2000:<E> <ListenThread> **** The WebLogic Server is no longer listening for connections.
Tue Aug 22 12:38:27 EDT 2000:<E> <ListenThread> **** You should probably restart it.
Tue Aug 22 12:38:27 EDT 2000: <WebLogicServer> Server shutdown by system
Tue Aug 22 12:38:27 EDT 2000: <WebLogicServer> Server shutdown commencing NOW
Tue Aug 22 12:38:28 EDT 2000: <HTTP> Destroying servlets in default servlet context.
Tue Aug 22 12:38:28 EDT 2000:<E> <SSLListenThread> ListenThread:run failed:
Please let me know the reason for this.It's very very urgent.
Thanks
Venkat

JMS server shuts down when quota_threshold reached

Similar Messages

Maybe you are looking for