JMSListenerResourceAdapter on SJAS8.1EE

Hi folks,
Application Server : Sun Java Application Server 8.1 EE
Node agent is not running. Using a single instance in a stand-alone mode.
No cluster setup done.
Operating System : Windows XP Prof.
IDM version : 6.0
Resource Adapter being configured : The JMSListener Resource Adapter
JMS Administered Objects Setup : I've set a ConnectionFactory (for Topics) and a
Topic via the Admin Console and created the corresponding Physical Destination.
When I set the following attributes on the JMSListenerResourceAdapter :
JNDIProperties (for InitialContext creation)
java.naming.factory.initial=com.sun.enterprise.naming.SerialInitContextFactory
java.naming.provider.url=localhost:1099
and specify the correct JNDI name for the ConnectionFactory and the Destination, I get
an error on the JSP :
Test connection failed for resource(s):
InboundTicketsListener: com.sun.messaging.jms.JMSException: MQRA:CA:Unsupported-setClientID()
Unfortunately, I dont get a complete Exception Stack Trace anywhere (even after a level 4
trace on the Adapter class) .
On researching the above exception, I found the following bug opened by Nokia on SJAS 8.1 EE.
Note the developer's comments when closing the bug:
http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=6197813
The IDM Resource Adapter for JMS does the same thing as com.nokia.oss.ossj.sa.ri.order.OrderScheduler
tried .
In the JMSListener Resource Adapter, is it possible that we doing something like ....?
connection.setExceptionListener(...);
As per Section 6.6 of the J2EE1.4 spec :
<from14Jee>
The following methods may only be used by application components
executing in the application client container:
javax.jms.Session method setMessageListener
javax.jms.Session method getMessageListener
javax.jms.Session method run
javax.jms.QueueConnection method createConnectionConsumer
javax.jms.TopicConnection method createConnectionConsumer
javax.jms.TopicConnection method createDurableConnectionConsumer
javax.jms.MessageConsumer method getMessageListener
javax.jms.MessageConsumer method setMessageListener
javax.jms.Connection method setExceptionListener
javax.jms.Connection method stop
javax.jms.Connection method setClientID
A J2EE container may throw a JMSException (if allowed by the method) if the
application component violates these restrictions
</from14Jee>
Looking at the support for setting up a MessageListener to monitor the Message Consumption lifecycle and the support for Durable subscriptions, the JMSListenerResourceAdapter also probably calls setMessageListener and setClientID(for Durable subscriptions),both of which are illegal in a non ACC scenario .
Has the JMSListenerAdapter been tested on SJAS8.1 EE (one of the supported Application server platforms)?
It's possible that WebLogic and Websphere may not be throwing the above error since the spec says :
A J2EE container "may" throw a JMSException.... in the above case ..
Any pointers or tips on how we can get around this issue would be really helpful !
Ciao

Thanks Wilfred .
Wilfred : On version 6 these kinds of exceptions should be logged in the syslog table (new logging table in the database) check if you have an exception there.
CB : I did try to run lh syslog and didnt retrieve any records. Do I need to make any configuration changes to have all exceptions go to syslog or does every exception out of the box go into syslog ?
Wilfred : The other possibility is that the html source does contain the full stacktrace as a comment. Please check that also.
CB: Checked that too - View Source doesnt give the full stack unfortunately.
Wilfred : If it is reproducible log a support case with the traces.
CB: It is reproducible. We are in the process of filing a support case
Wilfred : FYI bug 6197813 has been closed as not a bug as the app server is allowed to throw that exception if the component is not in the client container of the app server.
CB: Yes, I understood that .. I know that it's not an Application server bug.
However you didnt answer my main questions :)
The J2EE spec says that the application server "may" throw the exception if the component calling connection.setExceptionListener() is not an AppClient.
First - Isnt it true that the IDM Resource adapter is not running in an appclient? Isnt it running inside a WebContainer?
Second - Is it possible that SJAS throws the exception but WebLogic/Websphere dont in the above scenario?
Third - Has the JMSListener Resource adapter been tested and certified on Sun Java Application Server?

Similar Messages

  • Satellite P200-1EE - Hard disk not found if I try to install XP

    Hi and I have a problem.
    I recently bought a Toshiba Satellite P200-1EE series laptop running (of all things) Vista and nothing but problems ever since so im trying to install XP professional and overwrite Vista.
    But whenever I try to install it says "hard disk not found..... unable to access"
    I've heard of problems like this before something like a "software block protocol"
    Any suggestions?

    Hi!
    Why you dont search in the forum before you start a new topic?
    I mean you will hundreds of threads about this issue here in the forum and you will find the solution of your problem in few minutes.
    Well, the reason for this is because you need the SATA drivers before you can install Windows XP. As far as I know your notebook is equipped with an Intel chipset and so you need the Intel Storage Manager. You can integrate the drivers using an external FDD or nLite [www.nliteos.com]. Furthermore this document could be useful for you:
    http://aps2.toshiba-tro.de/kb0/HTD9401AN0000R01.htm
    If you have more questions, please use the forum search!!!
    Bye

  • Satellite P200-1EE - Can I get a Blu-Ray drive for it?

    At last, Toshiba have joined the BDA!!!!!!
    Does any one know if or when they will release a Blu-Ray drive to replace the HD-DVD drives in a P200-1EE?
    I know this post may be little premature but I have felt betrayed ever since buying the laptop and 3 weeks later Toshiba dropping the HD-DVD format.

    Hi!
    I dont know when Toshiba will release a Bluray drive that you can buy to exchange it with your HD-DVD drive.
    But maybe a drive from another manufacture will also work on your notebook. In your case I would go to the nearest computer shop and ask for such a drive. Maybe you can test it in the shop if it works because not all drives are compatible with all notebooks (e. g. pin assignment).
    Good luck!

  • Can not download Oracle8.0.5.1EE

    When I try to download Oracle8.0.5.1EE, I got "No such file" message. Where can I download it? Please emaol me at "[email protected]".
    Thanks very much.
    Chuck

    metalink.oracle.com
    but you need a support contact for it.
    BTW: 8.0.5 is de-supported

  • Does Satellite P200-1EE has BT built-in?

    This is going to sound like a really stupid question ( coming from someone who used to work in the I.T. industry ) ....
    I have seen a lot of mention about '*Bluetooth*' functionality, but *how do i know for certain if my 'lappy' has it*, _*or*_ better still *if it has ever been setup* for it
    ( I have a *Satellite P200-1EE* - if that makes any difference ) ??

    im in I.T is well. unfortunately on the box it shows the blutooth sign... it doesnt have bluetooth capabilities. if you need bluetooth you can get attachable usb sticks which come with the software required to make your computer bluetooth accessable. good luck.

  • Sound and graphics drivers for Satellite P200-1EE and Windows XP

    Hello all,
    I just bought a new Sattelite P200-1EE. I had it downgraded to Windows XP Service Pack 2. from Vista.
    I have two problems:
    1. I cannot find the graphics driver for the ATI Radeon Mobility HD2600 for Windows XP. When I hit the link,
    I get an "could not connect to remote server".
    2. I cannot get the sound driver to work. In fact, I can't even see the sound card. Ishel there something else I need to install?
    Thanks for any help

    Regarding the point;
    1) It looks like a driver server issue possibly the guys maintain the server. I would recommend checking this in next few days.
    2) First of all you have to update the XP to the latest state. All available MS hotfixes for XP must be installed. Very important are these patches; KB888111 and KB835221. You have to install these patches before the sound driver installation.
    Best regards

  • Satellite L670-1EE - reinstallation of Win 7 - serial key not readable

    Hi,
    I bought a Toshiba Satellite L670-1EE Jan. 2011
    Now the System completely crashed and I need to reinstall from scratch.
    My Problem is, that the first 5 digits of the Microsoft Product Key are not readable.
    Is there any Chance to get the Key or can I use a special Toshiba image to recover?
    I can not access the installed windows, startup fails, I tried a recovery with a win DVD but it did not work, so I need to reinstall.

    > My Problem is, that the first 5 digits of the Microsoft Product Key are not readable.
    This key cannot be used in connection with new Windows 7
    This is a OEM key which belongs to the Toshiba image. Mostly such keys dont work.
    The point is that Toshiba preinstalled system was already activated within the Toshiba image.
    It does not need to be activated after the recovery procedure.
    So if you want to use own Windows system, you have to purchase the license from Microsoft.
    In case you want to use the Toshiba image, you should use the Toshiba Recovery disk which you probably did not create in the past. Right?
    In such case there is another option: you can order such disk from here:
    http://backupmedia.toshiba.eu/landing.aspx

  • Satellite A500-1EE - Where to find Windows 7 32bit drivers?

    Welcome!
    I have Satellite A500-1EE with Windows 7 64bit version and I have to install 32bit version of this system. Is it possible?
    Because i can't find any drivers for 32bit.

    Hi tosipaw,
    Of course its possible and you can install what you want on your notebook but I dont understand why you want to change from 64bit OS to 32bit version.
    What are the reasons of this?
    Normally everything can be downloaded here:
    http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
    Your model belongs to the PSAR9E series and therefore only 64bit drivers available.
    If you search for all A500 models (without PSAR9E) you will find a lot of Vista 32bit drivers. Maybe they work and its worth a try!! :)

  • Satellite P200-1EE Can I install a 2nd hard disk in the spare bay?

    First of all, hi everyone!
    I have the above model laptop, and it has a spare disk bay. There are pin connectors at one end, but it does not seem like the drive will fit. It's like there is a component missing - like the connector slot housing for the 1st drive. I have bought a 500GB drive, and have tried seeing whether it would fit. The 1st drive has a metal caddy attached, and that did not work either.
    Is it possible to fit a 2nd drive to this model? If so, what would I need to do it?
    Thanks!
    Andy

    Hi
    If you have a connector in second HDD bay you can add a second HDD. But you will need such a metal caddy as on the first HDD. Therefore you can contact an authorized service provider because you can get all spare parts from them.
    On the Toshiba website is a list of all ASPs, check this!!!

  • Satellite P200-1EE: HD-DVD issue: Unable to output video to external device

    I know this subject has been brought up before but after searching the web on and off for months now I still can't find a solution that works for me.
    The problem occurs when trying to use the Toshiba HD-DVD Player to play HD-DVD discs. The program starts but after reading the disc it displays the message +"Unable to output the video to an external device. Please check the external output setting after ending the application."+ and will not play the movie. I'm not sure when this problem first started happening as I went a couple of months without using the HD-DVD feature but I know my laptop was capable of playing the DVD's on both the laptop's display and through the HDMI cable when I first got it just under a year ago.
    Toshiba's website mentions this problem and suggests updating the Realtek Audio drivers but I've updated several times now and there has been no change. I've also updated the HD-DVD Player software, also to no avail. The problem is the same regardless of how I try to output the video and occurs on any HD-DVD disc.
    I've read that PowerDVD may be a better choice for playing HD-DVD's but I'm rather reluctant to spend the money when it might not work so unless someone can guarantee this as a solution I don't think I'll be trying it.
    If anyone could suggest a solution that I haven't yet tried I'd be very grateful.

    >The program starts but after reading the disc it displays the message "Unable to output the video to an external device. Please check the external output setting after ending the application." and will not play the movie.
    Today is your lucky day mate ;) I found a solution!
    Here in this thread you can find a link to a Toshiba doc which describes what is going wrong and what you have to do to solve this annoying issue;
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=114726&#114726
    It looks like the new sound driver installation will help you to solve this HD-DVD playback problem.
    Check it out.

  • Satellite P200 1EE - can this output to 1080p via HDMI?

    HI
    My first post on this forum.
    I recently bought this notebook and have connected it to my LCD TV at home. However, I can't seem to get 1080p via HDMI only 1080i (my TV is capable of accepting 1080p through HDMI). Anyone know if this is possible? (I have updated the latest display drivers from Toshiba).
    Also whilst watching movies, I am noticing a lot of grain/noise on the notebook screen. Is this normal or is it a defect? I was watching Transformers HD DVD last night and could see loads of noise not only during dark scenes but generally throughout the film.
    Any help will be much appreciated.
    Thanks in advance.
    Shak.

    Hi Shak.
    It helps that you've ensured your LCD tv supports 1080p. For this resolution you have to check in your graphic card driver catalyst a needed option. Open that control center and look for dvi settings and uncheck the "reduce dvi frequenzy on high resolution displays" option. 1080p should work now.
    For the grainy/noisy thing with the Transformers HD-DVD. I don't think it is a defect or something like that. Just put in another movie and see if the picture quality is better or not. Quality differs from movie to movie.
    Check it out and give me a quick answer if it worked.
    Regards,
    Joey

  • Satellite P200-1EE - Can't get camera to start

    After plunging through the forums I notice a lot of people have been having problems with their built in web cams.
    Before the camera was just moody, turning on and off stating other applications had locked usage (when they werent even on, not even in background tasks) but it stopped working.
    I managed to uninstall the camera driver and download the Vista version of the website. The software seems to have installed fine but when you start the software it says "turn camera on" and even by pressing the hot keys I cant get the camera to start, just the software with a grey screen.
    I checked device manager and its no use.
    Help please! I dont want to have to go out and buy a new camera.

    Hi!
    I have two Toshiba laptops and no problems with the webcam. Both webcams work fine and without problems.
    Did you download the driver from the Toshiba website?
    http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers
    Maybe a BIOS could also solve the problem.
    Have you installed the notebook with the Toshiba recovery disk or Microsoft disk?
    Bye

  • SJAS8.2 & AJP/mod_jk

    Hi.
    I'm wondeing if there is a mean to install AJP protocol to work with Apache/mod_jk as frontend.
    I only found docs about SJAS9.1 but none for 8.2.
    I followed the 9.1 tutorial but it didn't work on SJAS 8.2....
    Has anybody ever tried ?
    Thanks.

    http://jakarta.apache.org/site/downloads/downloads_tomcat.html

  • Tecra R940-1EE - dead with lead error 4Eh

    Hi.
    Last night without any warning my laptop stopped working. I've tried with and without battery, pressing the shutdown button for 20/30 seconds without the battery, with battery, without the DC adapter, etc.
    The error code I'm getting on the power led (blinking in orange) is 01001110 - 4Eh.
    Does any one knows what this error stands for? I'm pretty sure this is a power related issue, but I'm not able to find what the error codes means.
    Thanks

    Hi
    Googling around I found info that error codes 4*h means that there is some error with S3V output.
    There is no 4Eh 4Eh code.
    Just folow codes are available:
    40h S3V voltage is over 3.47V.
    45h S3Vvoltage is under 3.14V.
    46h S3V voltage is under 3.14V or less when the computer is booting up.
    That’s all I found online in different forums.

  • Satellite P200-1EE - is the Data (E:) drive physically seperate from C:?

    Want to format and re-install everything on the laptop as it's playing up during operation. However need to confirm if the drives are actually seperate and not virtual, so I know to backup on an external drive instead of losing everything!
    Thanks for your advice people!

    I agree with Barrie. When you use the Toshiba recovery disk, the HDD will be formatted and you will lose your data.
    If you use a Microsoft Disk, you can choose on which partition the OS (operating system) should be installed. So must not backup your data.
    By the way, I save my data additional on an external HDD.

Maybe you are looking for

  • Problem with AGO function in OBIEE

    Hi I am new to OBIEE, I am working on Trend Analysis of ETL Mappings, I am using AGO Function to get the Previous day Elapse Time of a mapping but while generating the report its behaving in a strange way. like AGO("BI Performance"."Map Val Fact"."El

  • MySQL very slow on Win 2000 Fast on Win XP Found a fix

    Greetings, I've recently rolled out an internal LabVIEW 8.5 application that works with a MySQL database.  Several of the PCs required an installer.  Although a few of them belonged to other LabVIEW developers in the office and required only the .exe

  • Hi I am newbie to Jsp,could anybody please help me

    Hi ,I am designing one login form using Jsp and servlets,these are my programs: import java.io.IOException; import javax.servlet.RequestDispatcher; import javax.servlet.ServletConfig; import javax.servlet.ServletContext; import javax.servlet.ServletE

  • Firmware: Does it exist in iBook G4, and is it upgradeable

    I saw a reference to a firmware revision, and I wondered if an iBook G4 has its BIOS or a part of in upgradeable (flashable) EEPROM. When I inquire "About this Mac," it reports that the Boot ROM version is 4.8.5f0, and I take this to mean that the Bo

  • How to make a Graphics2D object from a Graphics object?

    Hallo ! Graphics g = pj.getGraphics(); Graphics2D g2 = (Graphics2D) g;I get an Exception as follows: java.lang.ClassCastException: sun.awt.windows.WPrintGraphicsWrapper Is there an other possibility to to make a Graphics2D Object ? Or can I repair th