Jmx notification problem

There is
getNotificationInfo Successful
The operation [getNotificationInfo] was successfully invoked for the MBean [bean:name=test].
The operation returned with the value:
[Ljavax.management.modelmbean.ModelMBeanNotificationInfo;@1b9d4d8
in http://127.0.0.1:9292/ and
getNotificationInfo button in jconsole doesn't print any error. But there is
21-Feb-2006 17:39:11 RequiredModelMBean getAttributes(String[])
SEVERE: Failed to get "NewNumber": javax.management.AttributeNotFoundException: getAttribute failed: NewNumber is not readable
21-Feb-2006 17:39:11 RequiredModelMBean getAttributes(String[])
SEVERE: Failed to get "NotificationInfo": javax.management.MBeanException: An exception occured while trying to get an attribute value through a RequiredModelMBean
when making some operation on the bean in jconsole. Where should I check?
Tried to extend NotificationBroadcasterSupport class instead of NotificationBroadcaster interface implementation (like is many examples in web), but that gave absolutely no affect....
In general everything must be easy.
The steps seem to be such:
Server must be started, beans must be exported to the server.
The beans that must be listened should implement NotificationBroadcaster interface or extend NotificationBroadcasterSupport class.
On the client side Notification listener on a specific bean on the server must be registered via addNotificationListener. And that addNotificationListener defines the action when notification comes. And notification listener must implement NotificationListener interface.
And that seems to be all, right?

Hi Nikolay,
If you're running on Sun's Tiger JVM you can enable the JMX logging traces:
- start your application with -Djava.util.logging.config.file=<logging.properties>
- use the logging.properties given below:
------------------------------------------logging.properties------------------------------------
handlers= java.util.logging.ConsoleHandler
.level=INFO
java.util.logging.FileHandler.pattern = %h/java%u.log
java.util.logging.FileHandler.limit = 50000
java.util.logging.FileHandler.count = 1
java.util.logging.FileHandler.formatter = java.util.logging.XMLFormatter
java.util.logging.ConsoleHandler.level = FINEST
java.util.logging.ConsoleHandler.formatter = java.util.logging.SimpleFormatter
// Use FINER or FINEST for javax.management.remote.level - FINEST is
// very verbose...
javax.management.level=FINEST
javax.management.remote.level=FINER
------------------------------------------logging.properties------------------------------------
Alternatively you may also try to switch on the traces dynamically - see my
blog on the subject:
http://blogs.sun.com/roller/page/jmxetc?entry=tracing_jmx_what_s_going
Hope this helps,
-- daniel
JMX, SNMP, Java, etc...
http://blogs.sun.com/roller/page/jmxetc
There is
getNotificationInfo Successful
The operation [getNotificationInfo] was successfully
invoked for the MBean [bean:name=test].
The operation returned with the value:
[Ljavax.management.modelmbean.ModelMBeanNotificationIn
fo;@1b9d4d8
in http://127.0.0.1:9292/ and
getNotificationInfo button in jconsole doesn't print
any error. But there is
21-Feb-2006 17:39:11 RequiredModelMBean
getAttributes(String[])
SEVERE: Failed to get "NewNumber":
javax.management.AttributeNotFoundException:
getAttribute failed: NewNumber is not readable
21-Feb-2006 17:39:11 RequiredModelMBean
getAttributes(String[])
SEVERE: Failed to get "NotificationInfo":
javax.management.MBeanException: An exception occured
while trying to get an attribute value through a
RequiredModelMBean
when making some operation on the bean in jconsole.
Where should I check?
Tried to extend NotificationBroadcasterSupport class
instead of NotificationBroadcaster interface
implementation (like is many examples in web), but
that gave absolutely no affect....
In general everything must be easy.
The steps seem to be such:
Server must be started, beans must be exported to
to the server.
The beans that must be listened should implement
nt NotificationBroadcaster interface or extend
NotificationBroadcasterSupport class.
On the client side Notification listener on a
a specific bean on the server must be registered via
addNotificationListener. And that
addNotificationListener defines the action when
notification comes. And notification listener must
implement NotificationListener interface.
And that seems to be all, right?

Similar Messages

  • Org.omg.CORBA.MARSHAL exception For JMX Notification

    I am running Weblogic 9.2 java version 1.5.0_04 and I am tring to recieve JMX Notifications from a Custom MBean running in Weblogic but I keep recieving the following exception:
    Jan 5, 2007 12:55:25 PM ClientNotifForwarder NotifFetcher-run
    SEVERE: Failed to fetch notification, stopping thread. Error is: java.rmi.MarshalException: CORBA MARSHAL 0 Maybe; nested exception is:
         org.omg.CORBA.MARSHAL: vmcid: 0x0 minor code: 0 completed: Maybe
    java.rmi.MarshalException: CORBA MARSHAL 0 Maybe; nested exception is:
         org.omg.CORBA.MARSHAL: vmcid: 0x0 minor code: 0 completed: Maybe
         at com.sun.corba.se.impl.javax.rmi.CORBA.Util.mapSystemException(Util.java:197)
         at javax.rmi.CORBA.Util.mapSystemException(Util.java:67)
         at org.omg.stub.javax.management.remote.rmi._RMIConnection_Stub.fetchNotifications(Unknown Source)
         at javax.management.remote.rmi.RMIConnector$RMINotifClient.fetchNotifs(RMIConnector.java:1285)
         at com.sun.jmx.remote.internal.ClientNotifForwarder$NotifFetcher.fetchNotifs(ClientNotifForwarder.java:508)
         at com.sun.jmx.remote.internal.ClientNotifForwarder$NotifFetcher.run(ClientNotifForwarder.java:399)
         at com.sun.jmx.remote.internal.ClientNotifForwarder$LinearExecutor$1.run(ClientNotifForwarder.java:83)
    Caused by: org.omg.CORBA.MARSHAL: vmcid: 0x0 minor code: 0 completed: Maybe
    I received this first by trying JConsole that comes with JDK 1.5. This only occurs with JMX Notifications because I am able to execute the MBean operation of the MBean and I can see my custome MBean being executed in WebLogic but my custom mbean sends out a JMX Notifications and that causes
    the above exception.
    I wrote my own NotificationListener program to make sure that it is not a JConsole problem and I got the same problem. I tried using t3 and rmi protocol to see if one of them would work but neither worked. See the code below for the Notification Listener:
              // String protocol = "t3";
              //String jndiroot = "/jndi/";
              String protocol = "rmi";
              String jndiroot = new String("/jndi/iiop://" + hostName + ":" + port + "/");
              String myserver = "weblogic.management.mbeanservers.domainruntime";
              JMXServiceURL serviceURL = null;
              try {
                   serviceURL = new JMXServiceURL(protocol, hostName, port, jndiroot + myserver);
              } catch (MalformedURLException e1) {
                   logger.debug("malformedURLexception caught");
                   e1.printStackTrace();
              Hashtable h = new Hashtable();
              h.put(Context.SECURITY_PRINCIPAL, userName);
              h.put(Context.SECURITY_CREDENTIALS, password);
              // h.put(JMXConnectorFactory.PROTOCOL_PROVIDER_PACKAGES, "weblogic.management.remote");
              try {
                   connector = JMXConnectorFactory.connect(serviceURL, h);
                   connection = connector.getMBeanServerConnection();
              } catch (IOException e1) {
                   e1.printStackTrace();
              logger.debug("The connection is : " + connection.toString());
              ObjectName mbeanName = null;
              try {
                   mbeanName = new ObjectName("Mbean:Name=com.test.bean,Type=TestMBean,Location=AdminServer");
                   logger.debug("Created MBeanObjectName: " + mbeanName.toString());
              } catch (MalformedObjectNameException e) {
                   e.printStackTrace();
              } catch (NullPointerException e) {
                   e.printStackTrace();
              try {
                   logger.debug("The mbean is registered " + connection.isRegistered(mbeanName));
              } catch (IOException e1) {
                   e1.printStackTrace();
              try {
                   connection.addNotificationListener(mbeanName, this,null, null);
                   logger.debug("the connection is added a listener : " + connection.isInstanceOf(mbeanName, "com.test.bean.MBean"));
                   logger.debug("Listener registered ...");
                   //Keeping the remote client active.
                   System.out.println("waiting for notifications, got to log file for details....");
                   System.in.read();
              } catch (InstanceNotFoundException e) {
                   e.printStackTrace();
              } catch (IOException e) {
                   e.printStackTrace();
              public void handleNotification(Notification n, Object arg1) {
                   logger.debug("******************************************");
                   logger.debug("* Notification count : " + counter++ + ", Notification received at "
                             + new Date().toString());
                   logger.debug("* type = " + n.getType());
                   logger.debug("* message = " + n.getMessage());
                   logger.debug("* source = " + n.getSource());
                   logger.debug("* seqNum = "
                             + Long.toString(n.getSequenceNumber()));
                   logger.debug("* timeStamp = " + new Date(n.getTimeStamp()));
                   logger.debug("* userData = " + n.getUserData());
                   logger.debug("*******************************************");
    I commented out the t3 protocol but it doesn't work for both protocol types. I implemented a Notification Listener within WebLogic and that
    worked right away using the following code below:
         InitialContext ctx = new InitialContext();
    rmbs = (MBeanServer) ctx.lookup("java:comp/env/jmx/runtime");
    As the document "Developing Custom Management Utilities with JMX" on page 4-7 "Make Local Connections to the Runtime MBean Server" described.
    Has anyone seem the above exception "Failed to fetch notification, stopping thread. Error is: java.rmi.MarshalException: CORBA MARSHAL 0" when a client is trying to receive JMX Notification? All help would be greatly appreciated.
    Thanks,
    Ajay

    Hi ajay,
    How did u manage to access the mbeanserver in BEA ? Can u pls brief on that. Even I am trying the same. But, the MBEANSERVEROBJECT i create, eventhough has NO NULL value, is not able to acces the mbean. Any method access through this object creates an EXCEPTION. Please help me too. I will try solving ur problem too.:-)
    Also, do i need to put my MBEAN CLASS in the weblogic server ? Should i create an APP SERVER in BEA ?
    I appreciate ur early response, dude..

  • I reset my iPhone 4 Network settings to fix the push notification problem, but I lost my internet connection. How do I fix it?

    I tried to solve the "connect to iTunes to receive push notifications"-problem by resetting my network settings, but it only caused me to lose my internet connection when using 3G. Now I can't do anything with this stupid phone. How do I fix it? I don't want to reset anything anymore, I'm sick of this new iOs update, it seriously messed up my phone and I can't do anything properly anymore. Any help?
    And btw, I would also like to get the push notifications back on. Connecting to iTunes did absolutely nothing. Resetting the network settings only made my situation worse. Help please!

    Hi there Julia,
    Ahh The iPhone isn't "stupid" it's been called "stupid" because you are frustrated at the situation , but try
    Load iTunes. Backup your phone. Make sure it is backed up !! Run restore. This will get rid of the error! And please what ever you do , do not skip the back up!
    Thanks,

  • JMX Notification

    Hi,
    I am new to JMX,
    I have written sample code after looking at the examples provided in CodeShare...
    The requirement in my project is .. We need to recieve notifications from Weblogic MBeans like JDBCConnectionPoolRuntime, JVMRuntime etc,
    I am able to add a NotificationListener to the above MBeans, but i am not able to get any notifications from the Listener.. even there is change in the attibutes of above MBeans.
    I tried an example which registers to LogBroadcasterRuntime but the example code also did not throw any notifications.
    Please help me out ..
    Thanks and Regards,
    Keerthi

    ( I have another thought using JMX notifications with spring 2.0. The easiest way to send notifications is to inherit from NotificationBroadcasterSupport, however trouble arises when inheritance is already in use.
    Is there a nice way to avoid implementing addNotificationLister, removeNotificationListener and sendNotification which are part of the otificationBroadcaster ? )
    ......and at the expense of coupling to both spring and jmx the notificationPublisher is an excellent tool to satisfy my demands .........
    Message was edited by:
    Toxic
    Message was edited by:
    Toxic

  • How JMX notifications could be sent and received remotely?

    How JMX notifications could be sent and received remotely?

    Sun has a product called JDMK which does just that. Its actually pretty good and not too expensive.
    I believe latest versions of JBoss can do it as well. Don't know about other vendors.
    As a last resort you could intercept the notifications yourself and forward then as ordinary RMI/EJB/whatever calls.

  • ICal Notifications (problems)

    I'm having a heck of an introduction into the world if notifications, and I can honestly say, I'm frustrated, so I apologize if this comes off sounding short.
    I received an important notification from a business partner of mine with all of the details of the meeting enclosed in an iCal Invitation attached to an email from them. The attachment seemed fine, the icon displayed inline with the attached message. (using Mail.app). I clicked on it, and was taken to iCal.
    The notification appeared in the notification box in iCal.
    Clicking on the invite, iCal spat back the error: "Someone invited you to an event using an email address that isn’t on your “me” card in Address Book. Find your email address in the following list and add it to your card in Address Book."
    Unfortunately there is no email address listed for me to add to my Me card. I've looked all over the web, and no one seems to have a fix.
    1. Tried recreating card in Address book and re-associating it to me
    2. Tried making a card with JUST the email address the invite was sent to
    3. Searched the web and found a few references on how frustrating it is, no answers
    4. Submitted a bug report to Apple (4/29/07)
    Any help would be most appreciated.

    I have this exact same problem, and I cannot figure out what to do. My "me" address card now includes 3 versions of the e-mail address receiving he invitation:
    [email protected]
    <[email protected]>
    My Name <[email protected]>
    iCal still will not recognize it, and will not accept the invitation.
    What can I do?

  • Extended notifications problem

    Hi experts,
    I am trying to configure extended notifications for around 7 to 8 different taks
    pertaining to different workflows.
    I could successfully do it for 1 task.
    Then after successful testing I did add more filters to the same configuration
    under same subscription and delivery.
    I even created new schedules for the new filters. But unfortunately it is not working.
    I could debug the standard program SWN_SELSEN and found that the particular WAPI call to
    select the delta Work Items from SWWWIHEAD and SWWWIHIST is failing because of some
    timestamp mismatch.
    Can you please provide me some help regarding this ?
    Thanks,
    Deb

    Hi Purvesh,
    You can find the step by step procdure in the following blog.
    How to get Work items @ your Outlook Inbox
    You can find all the definitions and theories in the SAP Help link provided in the same blog.
    I initially followed the above and could successfully do it for 1 task.
    However, I was stuck in achieving the same for multiple task belonging to different workflows.
    Here is how I did it:
    1)  Do the configuration in SWNCONFIG as per the blog and SAP Help
         A)  Create your own delivery schdule
         B)  Create your own subscription using the above delivery schedule
         C)  Create your own filters
         D)  Create your own selection schedule
    2) Then run the report SWN_SELSEN to do the actual selection and delivery based on the schedules    you created.
    The key is creating the filters. Follow the SAP Help link closely and try it. If you face any problems
    the please let me know.
    Please award appropriate points.
    Thanks & Regards
    Deb
    Edited by: debabrata mohanty on Dec 10, 2008 11:26 AM

  • Speaker and notification problem on my iPod touch...?

    Earlier today, I was listening to music on my ipod when it suddenly turned off. This confused me, so I just turned it back on- the only problem is that it didnt work. I pressed the play button, and it showed the song was playing, but it wasnt. I did not have headphones in. After a few minutes of trying, I just tried to turn it up, resulting in the discovery that my volume buttons were not working, and on my music app the music bar didnt show up. Also, after this happened, I realized that when my ipod was locked- I was no longer getting my notifications alerting me. The ipod music works fine with headphones plugged in, and now the volume buttons are working but the only time sound comes out is from the settings volume when I tested it.
    I have already reset my ipod, both ways. I reset it just by pressing the home and power button and then reset it by resetting all settings. I really need help, I don't know what's going on with it.

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
    Try the following to rule out a software problem
    - Check also Settings > General > Accessibility > Hearing. Make sure that the sound balance is not set all the way to "R".
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar
    If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price                  
    A third-party place like the following will replace the jack for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the jack yourself
    iPod Touch Repair – iFixit

  • Workflow Notification problem

    Hello,
    I have a problem with WorkFlow Notification.
    When a send a workflow test notification. I reveive the mail, in my inbox. I use Webaccess. The notification server works. But in the body of the mail, i don't have the Acknowledge button, I have only &MAILTO....
    I have three tiers for OCS 10.1.2.3 and the OID is separate of the Store database. I have run the Worflow Assistant configuration on my middeltier, and I have change the password on OID for the user owf_mgr to be the seem that in the store database.
    I have a single box installation and is work proprely...
    Can I help me ?
    Message was edited by:
    user473198
    The middle tier has been Migrate to a v2 installe (9i) to a 10.1.2.0 ... and the schema of OWF_MGR cannot be removed... it's the problem ?

    Hello Deepika,
    I don't know, how to integrate the
    <a href="http://...">URL-description</a>
    into the notification, but when using plain text, most of the email clients suppress the line-breaks when the URL is fit in-between of < and >
    <http://www.long-url-here-with-a-line-break-in-the
    middle-of-nowhere.com>
    Maybe this gives you a quicker help.
    Best wishes,
    Florin

  • Nokia lumia 520 push notification problem with wha...

    I have a Lumia 520, and i find that i do not receive push notifications for my whatsapp messages. I have to open the application before the messages come through. I would like to know how to correct this. I have checked all my settings.

    On a HTC-forum I saw the next solution, and it works also for Nokia Lumia!  That means it is a Microsoft Issue!
    1) Unpin Windows store from start
    2) ERASE Internet Explorer History
    3) ADD new language to the keyboard (Settings-->keyboard-->add keyboards
        (CHOOSE A LANGUAGE THAT REQUIRE DOWNLOAD)
    4) When downloading is finished, it will ask to restart and install
    5) After installation and restart do the following;
         A) UNINSTALL WHATSAPP
         B) REINSTALL WHATSAPP (you can get conversation history back when asked, so no problem)
    After this the push function works, but there is still a delay up to 10 minutes! So when you test, be patient.
    NO BETTER PRESSURE MEDIUM THAN ANTI ADVERTISING SO AFTER THIS EXPEDITION PLEASE CHANGE YOUR STATUS TEXT TO:
    USING WINDOWS; THAT MEANS DELAY UP TO 10 MINUTES
    When all Window Phone users display that message, Microsoft has to come with a final solution! 
    Please spread the word

  • Community boards notification problem.

    Didn't quite know where to post this, hope here is okay!
    Although I have all the various options for notifications by email selected in the board preferences, I am not getting any sent through, the email address is correct. Any one else having this problem and/or know how to rectify the problem?
    Cheers.

    Thank you, Andrew.
    I have reported the matter to the hosts.   As you will understand, they operate in their own way and we cannot guarantee they will reply.   But my experience is they are very helpful and usually resolve matters like this.

  • Web Expense Notification problem in 11.5.7

    Hi all,
    When we create an Internet Expense with 40 lines the notification does not reach the manager for approval but it can be approved from Workflow Administrator responsibility.
    The problem does not occur for Expenses upto 30 lines.
    We are doing this on 11.5.7.
    Your valuable suggestions are appreciated.
    Regards,
    Avi

    This may seem a bit silly but could you install a 10g/11g database somewhere and then create a plsql package/function on the new rdbms to call the webservice? Then access the function via a dblink? I haven't done it with webservices but we do access plsql programs over dblinks all the time (we usually do keep them at the same rdbms version though).
    Edited by: mcharchu on Jan 8, 2009 8:56 AM

  • LMS 3.2 DFM email notification problem

    Hi,
    I got a problem in a newly installed LMS 3.2 with the DFM email notification.
    I can see the alerts appering on Alerts&Activities, but DFM would not send any emails.
    I can get emails from other moduls of LMS. CS sends me emails from successfully backups.
    The SNMP Server works fine. The settings are ok.
    I already reinstalled DFM.
    I have seen a thread exists on supportforum.cisco.com with the same problem.
    (https://supportforums.cisco.com/message/3033101#3033101)
    Maybe anyone have the answer to this problem.
    Thanks,
    C8-Netzwerk

    This looks like an issue I am currently tracking.  I have written a patch which should correct this.  You can get the patch by opening a TAC service request, and having your engineer contact me directly.
    Please support CSC Helps Haiti
    https://supportforums.cisco.com/docs/DOC-8895
    https://supportforums.cisco.com

  • Email notification problems

    Used to be the email notification appeared in my outlook in box and then disappeared when the message was delivered. Now it just stays there and also appears in my 8830. How can I fix this problems? Thanks.

    This is the notification that is also appearing in the blackberry:
    -----Original Message-----
    From: [email protected]
    [mailto:[email protected]]
    Sent: Saturday, August 02, 2008 07:05
    To: Dale Brown
    Subject: [NEWSENDER] - RIM_bca28a80-e9c0-11d1-87fe-00600811c6a2 -
    Message is from an unknown sender
    This message is used to carry data between the BlackBerry handheld and
    an associated server. Please do not delete, move or respond to this
    message - it will be processed by the server.
    BEGINETP 10
    A4kFAAAAAAAAAQ!!
    ENDETP 505820133

  • Notification Problem on: Calendar Server 6.0 and IMServer 6.1

    Hello everybody,
    I have a very confusing problem with the Instant Messenger notification feauture for the Sun ONE Calendar server. I have set up both servers and the jms can communicate with ens and the other way round. But if a event occours I get the following Message in the /var/opt/SUNWiim/default/log/server.log file:
    [19/Mar/2004:15:35:00 +0100] WARNING: CalendarReminder: User [email protected] Does not exist. (xxx is username and domainname)
    But now its getting confusing, if I send myself an Alert message over the IMS client applet I can see the following Message:
    [19/Mar/2004:17:53:00 +0100] DEBUG: [Realm] getUser: [email protected]
    [19/Mar/2004:17:53:00 +0100] DEBUG: [Realm] found user in cache: [email protected]
    [19/Mar/2004:17:53:00 +0100] DEBUG: Sending Alert/Invite
    Any ideas what I could have done wrong?
    Many thanks in advance
    Stefan Peinkofer

    I have the same problem... any forward in Struts after a call to WebLogic 8 session EJB will give me the same AccessControlException in HttpRequestFacade.getHttpRequestBase.
    It seems that after WebLogic EJBs is called, the security policy gets all mixed up. You can fix this by granting in code the correct policy just before the forward... but this is a workaround not a fix (and a potential security hole).
                Policy.setPolicy(
                    new Policy() {
                        public PermissionCollection getPermissions(CodeSource cs) {
                            Permissions perms = new Permissions();
                            perms.add(new AllPermission());
                            return(perms);
                        public void refresh() {
                return actionMapping.findForward("success");           

Maybe you are looking for

  • Weird Runtime error, please help.

    I recently started teaching myself java from a book, I liked it so I continued reading the book etc. I got to the chapter where it starts to talk about swing classes. The examples previous to this chapter compiled and worked great. Althoug in the swi

  • Adobe Customization Wizard X doesn't set Adobe Reader X to be default when customizing Acrobat X

    I've recently started working with Adobe Customization Wizard X. I've got Adobe Reader X customized and it's already installed all computers. Now, I'm working on customizing Adobe Acrobat X. During the customization, I only have the following 2 optio

  • Screen turning grey and demanding restart

    This may have been covered already, and my apologies if so, but I'm in the middle of a project and a google search turned up nothing. Every so often - and it seems to only happen when I'm using Safari - the screen will turn grey (from top to bottom)

  • Update DB properties statistics.

    Hi All, How to refresh the Essbase DB Proper statistics, In my data base I am seeing data at Zero level, but my data base Statistics properties shows Existing Level Zero Blocks as 0. I think my properties for this database in not updated. I am trying

  • Sync password does not work

    My hard drive was starting to crash and I was going to have someone come out and put in a new one for me. I couldn't find out how to back up my info so I figured I could sync my info and get it from firefox later. I wrote down the password and saved