JMX server connector on port 3997 error
Hi,
When i execute " dsccagent start " command, i am facing this error
**** Server encountered the following error: Failed to start JMX connector serve
r on port 3997: Invalid host Hostname
The agent C:\sun\dsee7\var\dcc\agent has not been started
Please help me.
Thanks,
Santosh
This issue has been resolved. The solution was to enable the fax connector (Exchange management Console/Server Configuration/Hub Transport/Receive Connectors/Windows SBS Fax Sharepoint Receive [Servername] = Enable.
Useful general reference:
http://blogs.technet.com/b/sbs/archive/2009/07/01/sbs-2008-introducing-the-pop3-connector.aspx
me
Similar Messages
-
Directory server connector installation error
Hi,
I am installing identity synchronization for windows suit 6.0 on windows2003 machine. Package get install properly. I am able to configure initial configuration for synchronization. I am getting plug-in error while installing Directory server connector.
I am able to install connector for AD machine.
I am getting plug-in error after providing directory server connector credentials.
Error window as follow,
================================
WPSyncResources:wPSInstallDSConnectorCredentialsPanel- plugin-error
================================
Please help me to resolve this issue.
Thanks,
Ankush
9923090231This error appears if you are installing against a Directory Server that does not have this entry in dse.ldif:
(In Sun Directory Server 5.2 this entry was not present, in 6.x it is there by default but "nsslapd-pluginEnabled: off" until ISW is installed
dn: cn=pswsync,cn=plugins,cn=config
objectClass: top
objectClass: nsSlapdPlugin
objectClass: ds-signedPlugin
objectClass: extensibleObject
cn: pswsync
nsslapd-pluginPath: /opt/SUNWdsee/ds6/lib/psw-plugin.so
nsslapd-pluginInitfunc: pswsync_init
nsslapd-pluginType: preoperation
nsslapd-pluginEnabled: off
nsslapd-pluginId: Identity Sync for Windows
nsslapd-pluginVersion: 6.3
nsslapd-pluginVendor: Sun Microsystems, Inc.
nsslapd-pluginDescription: Identity Synchronization for Windows Plug-In -
Configure web server connector
I'm trying to install the trial version of cold fusion and
get to the point where it prompts me to configure web server
connector but don't know what to put for this.
Please help!
ThanksI'm installing the Developer Edition and I'm have the same
problem with Vista. Can anyone help with this? I would love to
consult this Installation guide mentioned but it is not easily
found.
After installation I get this:
"You have successfully completed the first step in installing
Adobe ColdFusion 8.
However, the Adolbe ColdFusion 8 service does not appear to
be running, the web server connectors did not install successfully.
and the web server and/or website could not be reached on port 80.
Possible reasons include the Adobe ColdFusion 8 service failed to
start, the 2930 or 51800 ports are blocked, or the web server
and/or website is not running or is not configured to listen on
port 80 (in which case this is not an error).
Do the following to complete the installation:
1) Consult the installation Guide about how to manually
configure the webserver connector.
2) Ensure that anyfirewall software blocking ports 2930 or
51800 is disabled.
3) Ensure that Adobe ColdFusion 8 service is started.
4) Manually configure your web server connectors
5) Ensure that your web server and websites are started
6) Continue yor installation by logging in to the
Configuration Wizard at
http://localhost:8500/CFIDE/administrator/index.cfm
Thanks in advance! -
Web server connectors did not install
Newbie. I am trying to install the developer edition of
Coldfusion on my Intel-based MacBook Pro. In the set-up wizard I
click ‘Developer Edition’, ‘Server
Configuration’ and ‘Built-in webserver’.
This is the error message I have been getting:
“You have successfully completed the first step in
installing Macromedia Coldfusion MX7”
However, the ColdFusion service does not appear to be
running, the web server connectors did not install successfully,
and the web server and/or website could not bve reached on port 80.
Possible reasons include the ColdFusion service failing to start,
blocked 2920 or 51011 ports, or the web server and/or website is
not running or is not configured to listen on port 80 (in which
case this is not an error).
Please complete the following steps to complete the
installation:
1) Consult the Installation Guide on how to manually
configure the web server connecttor,
2) Ensure any firewall software blocking ports 2920 or 51011
is disabled,
3) Ensure the ColdFusion service is started,
4) Manually configure your web server connectors,
5) Confirm you web server and websites are started, and
6) Continure your installatino by logging in to the
Configuration wizard at
http://localhost:8500/CFIDE/administrator/index.cfm”
I cannot find an Installation Guide. Have switched off the
firewall in the ‘Sharing’ folder in the System
Preferences. Don’t know how I would manually configure web
server connectors and can find nothing in the Macromedia support
website.
What can I do? I am very keen to learn and use Coldfusion.
Any help greatly apprecitated.You should be able to find what you're looking for here:
http://livedocs.macromedia.com/coldfusion/7/htmldocs/wwhelp/wwhimpl/js/html/wwhelp.htm -
SSTP problem on Windows Server 2008 r2, clients getting error 0x8007274C
PROBLEM: Clients keep getting error 0x8007274C when attempting to connect to the VPN server using SSTP.
SYMPTOMS:
- L2TP connections works great
--- L2TP connections generate RemoteAccess events in Event viewer, but none whatsoever for the failed SSTP attempts
- Client CANNOT ACCESS
https://vpn.mycompany.net/sra_{BA195980-CD49-458b-9E23-C84EE0ADCD75}
- After several attempts to check and recheck RRAS Setup. Added IIS Role (much later) just to prove that cert is valid.
--- If server's RRAS service disabled, IIS enabled, client is able to browse to that VPN server, certificate checks out.
http://vpn.mycompany.net &
https://vpn.mycompany.net.
--- However, if RRAS service is running, IIS would not respond to either HTTP nor HTTPS traffic.
--- SSTP won't work whether or not WWW service is running.
- Port Scanner tests to the VPN Server reveals that port 80 & 443 are not open when RRAS service is running and IIS service stopped.
--- But, when RRAS service is stopped and IIS is running, port 80 & 443 responds.
--- Not sure whether 443 is [b]supposed to be open[/b] when only RRAS is running.
============================================================================
CLIENT:
============================================================================
- Vista SP1 (32-bit), Windows 7 (32-bit), Windows 7 x64 SP1
- CRL entry is resolvable
- vpn.mycompany.net certificate installed in Local Computer > Trusted Root CA
- SSTP Client connecting to FQDN vpn.mycompany.net
- Windows Firewall is DISABLED (for testing purposes)
- No Anti Virus nor Anti Malware protection running (for testing purposes)
- Can access other HTTPS sites
============================================================================
SERVER (Windows 2008 Svr r2; Roles: DNS, AD, RRAS):
============================================================================
- 2 NICS (1 bound to an internal IP, 1 bound to an external IP addr)
-- External NIC bound to a valid ISP IP Address, with a FQDN vpn.mycompany.net
- Windows Firewall Service on Server DISABLED
- No other device in front of the external IP addr NIC
- IPV6 on RRAS DISABLED
- NO RRAS Inbound/Outbound filter at all
- Windows Firewall Service disabled
- Using external Certificate Authority
- Certs bound to port 443 seem to match in registry key HKLM\...\SstpSvc\Parameters
It seems that the VPN server is simply not accepting the SSTP traffic. I don't think we've even gotten to certificate negotiation.
Been trying for a few days now, have consulted many SSTP online resources (MS and others) before posting.
Am stumped. Any help would be greatly appreciated.
============================================================================
SERVER CONFIGURATION CHECKLIST:
============================================================================
SERVICE_NAME: remoteaccess
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 4 RUNNING
(STOPPABLE, PAUSABLE, ACCEPTS_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0
============================================================================
SERVICE_NAME: sstpsvc
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 4 RUNNING
(STOPPABLE, NOT_PAUSABLE, ACCEPTS_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0
============================================================================
TCP 0.0.0.0:443 0.0.0.0:0 LISTENING 4
TCP 192.168.2.109:3268 192.168.2.116:45443 ESTABLISHED 500
TCP [::]:443 [::]:0 LISTENING
4
UDP 0.0.0.0:59443 *:*
1616
UDP 0.0.0.0:60443 *:*
1616
UDP 0.0.0.0:61443 *:*
1616
============================================================================
SSL Certificate bindings:
IP:port : 0.0.0.0:443
Certificate Hash : 4cbfd1fc43d4fea1cd9dce519a0c0901330a343d
Application ID : {ba195980-cd49-458b-9e23-c84ee0adcd75}
Certificate Store Name : MY
Verify Client Certificate Revocation : Enabled
Verify Revocation Using Cached Client Certificate Only : Disabled
Usage Check : Enabled
Revocation Freshness Time : 0
URL Retrieval Timeout : 0
Ctl Identifier :
Ctl Store Name :
DS Mapper Usage : Disabled
Negotiate Client Certificate : Disabled
IP:port : [::]:443
Certificate Hash : 4cbfd1fc43d4fea1cd9dce519a0c0901330a343d
Application ID : {ba195980-cd49-458b-9e23-c84ee0adcd75}
Certificate Store Name : MY
Verify Client Certificate Revocation : Enabled
Verify Revocation Using Cached Client Certificate Only : Disabled
Usage Check : Enabled
Revocation Freshness Time : 0
URL Retrieval Timeout : 0
Ctl Identifier :
Ctl Store Name :
DS Mapper Usage : Disabled
Negotiate Client Certificate : Disabled
============================================================================
Selected (some, not all) Info about Certificate bound to SSTP viewed through RRAS MMC:
Version: V3
Valid To: Thursday, August 30, 2012 6:59:59 PM
Subject:
CN = vpn.mycompany.net
OU = nsProtect Secure Xpress
OU = Domain Control Validated
Enhanced Key Usage:
Server Authentication (1.3.6.1.5.5.7.3.1)
Client Authentication (1.3.6.1.5.5.7.3.2)
CRL Distribution Points:
[1]CRL Distribution Point
Distribution Point Name:
Full Name:
URL=http://crl.netsolssl.com/NetworkSolutionsDVServerCA.crl
Thumbprint Algorithm: sha1
Thumbprint: 4c bf d1 fc 43 d4 fe a1 cd 9d ce 51 9a 0c 09 01 33 0a 34 3d
============================================================================
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\SstpSvc\Parameters]
"ServiceDllUnloadOnStop"=dword:00000001
"ServiceDll"=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,\
00,74,00,25,00,5c,00,73,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,\
73,00,73,00,74,00,70,00,73,00,76,00,63,00,2e,00,64,00,6c,00,6c,00,00,00
"ServerURI"="/sra_{BA195980-CD49-458b-9E23-C84EE0ADCD75}/"
"ListenerPort"=dword:00000000
"UseHttps"=dword:00000001
"SHA1CertificateHash"=hex:4c,bf,d1,fc,43,d4,fe,a1,cd,9d,ce,51,9a,0c,09,01,33,\
0a,34,3d
"isHashConfiguredByAdmin"=dword:00000001
"SHA256CertificateHash"=hex:ee,06,d8,78,2a,8c,95,d6,a1,40,d1,80,77,2c,e5,4c,f9,\
83,a1,e4,94,60,82,28,3d,56,49,82,44,bc,1e,a9
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\SstpSvc\Parameters\ConfigStore]
"ListenerPort"=dword:000001bb
"UseHttps"=dword:00000001
"V4CertPlumbedBySstp"=dword:00000000
"V6CertPlumbedBySstp"=dword:00000000
============================================================================
SELECTED EVENT VIEWER ENTRIES AFTER RESTART OF RRAS + SUCCESSFUL ATTEMPT OF L2TP (BUT NO ENTRIES AT ALL FOR SSTP CONN ATTEMPTS):
Level Date and Time Source Event ID Task Category
Information 8/31/2011 11:36:42 AM Microsoft-Windows-Time-Service 37 None The time provider NtpClient is currently receiving valid time data from zeus.olympia.local (ntp.d|0.0.0.0:123->192.168.2.114:123).
Information 8/31/2011 11:35:22 AM RemoteAccess 20275 None CoID={075CE235-832C-45FE-BE27-8B41BC765125}: The user with ip address 192.168.2.145 has disconnected
Information 8/31/2011 11:35:22 AM RemoteAccess 20272 None CoID={075CE235-832C-45FE-BE27-8B41BC765125}: The user OLYMPIA\inul connected on port VPN2-15 on 8/31/2011 at 11:34 AM and disconnected on 8/31/2011 at 11:35 AM. The user
was active for 0 minutes 32 seconds. 17264 bytes were sent and 21956 bytes were received. The reason for disconnecting was user request. The tunnel used was WAN Miniport (L2TP). The quarantine state was 'not nap-capable'.
Information 8/31/2011 11:34:57 AM Microsoft-Windows-Iphlpsvc 4200 None Isatap interface isatap.{6E06F030-7526-11D2-BAF4-00600815A4BD} with address fe80::5efe:192.168.2.144 has been brought up.
Information 8/31/2011 11:34:51 AM Microsoft-Windows-UserPnp 20003 (7005) Driver Management has concluded the process to add Service tunnel for Device Instance ID ROOT\*ISATAP\0002 with the following status: 0.
Information 8/31/2011 11:34:50 AM RemoteAccess 20274 None CoID={075CE235-832C-45FE-BE27-8B41BC765125}: The user OLYMPIA\inul connected on port VPN2-15 has been assigned address 192.168.2.145
Information 8/31/2011 11:34:50 AM RemoteAccess 20250 None CoID={075CE235-832C-45FE-BE27-8B41BC765125}: The user OLYMPIA\inul has connected and has been successfully authenticated on port VPN2-15.
Information 8/31/2011 11:34:49 AM RemoteAccess 20088 None The Remote Access Server acquired IP Address 192.168.2.144 to be used on the Server Adapter.
Information 8/31/2011 11:30:26 AM Microsoft-Windows-HttpEvent 15007 None Reservation for namespace identified by URL prefix
https://+:443/sra_{BA195980-CD49-458b-9E23-C84EE0ADCD75}/ was successfully added.
Information 8/31/2011 11:30:26 AM Microsoft-Windows-HttpEvent 15008 None Reservation for namespace identified by URL prefix
https://+:443/sra_{BA195980-CD49-458b-9E23-C84EE0ADCD75}/ was successfully deleted.
Information 8/31/2011 11:30:26 AM Service Control Manager 7036 None The Application Layer Gateway Service service entered the running state.
Information 8/31/2011 11:30:26 AM Service Control Manager 7036 None The Routing and Remote Access service entered the running state.
Error 8/31/2011 11:30:26 AM RemoteAccess 20106 None "Unable to add the interface {BBF2BA88-DCC5-4D36-9256-E1C8AF602467} with the Router Manager for the IPV6 protocol. The following error occurred: Cannot complete this function.
Error 8/31/2011 11:30:26 AM RemoteAccess 20106 None "Unable to add the interface {DF914ECC-AC6A-441E-A47C-57CE90C7F8B0} with the Router Manager for the IPV6 protocol. The following error occurred: Cannot complete this function.
Information 8/31/2011 11:30:21 AM Service Control Manager 7036 None The Routing and Remote Access service entered the stopped state.
Information 8/31/2011 11:30:20 AM Service Control Manager 7036 None The Application Layer Gateway Service service entered the stopped state.
Information 8/31/2011 11:30:01 AM Microsoft-Windows-Eventlog 104 Log clear The System log file was cleared.
============================================================================
============================================================================Hi, I'm in the exact same situation and for once google is of no help. I have tried to get a simple connect through to my server (by using "telnet vpn.myserver.com 443") but it will only timeout. After deactivating the Windows firewall on the VPN box (which
is a virtual machine on a Hyper-V R2 SP1) I can locally telnet the VPN box and even get the special url (https://vpn.myserver.com/sra_{BA195980-CD49-458b-9E23-C84EE0ADCD75}/) to work. But this only works on the VPN box itself, no other server or client is
able to contact it. I have tried to connect from another server sitting next to the vpn box and in the same subnet (public IPs) but couldn't connect either. PPTP and L2TP connections are working but not SSTP. Another approach was to manually bind the http.sys
to specific IPs. No change. I'm fresh out of ideas. Anyone? regards, ck -
What am I trying to do?
I have tried installing Microsoft Exchange Server 2013 Cumulative Update 7 Setup on a fresh install of Windows Server 2012 R2 but it gets stuck when running the setup exe on Step 8 of 14 “Mailbox Transport Service” I have included full
error logs at the bottom of the page but the basics are in order it will throw which loop around are:
[01/20/2015 17:13:20.0084] [2] Beginning processing Set-SharedConfigDC
[01/20/2015 17:13:20.0178] [2] The call to Microsoft Exchange Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error. Error details No Minimal Required Number of Suitable Directory Servers
Found in Forest mydomain.com Site Default-First-Site and connected Sites..
[01/20/2015 17:13:20.0178] [2] No Minimal Required Number of Suitable Directory Servers Found in Forest mydomain.com Site Default-First-Site and connected Sites.
Exchange is currently running in the envirmonet on 2010 Sp3 I am installing 2013 CU7 fresh so I can migrate the databases over.
What am I running?
2 X DC on domain and forest functional level 2008R2 both writable
1 X fresh install of Windows 2012 R2 which is domain joined
What have I tried?
Checked Ipv6 is enabled on all DC NICS and Existing Exchange Servers
Rebooted every server
Run setup as Administrator
My account is part of the domain Enterprise Admin group
Tried adding "Exchange Server" or "Exchange Enterprise Servers" to the group policy and doing the relevant gpupdate /force and reboot :
Computer Configuration Windows Settings
Security Settings + Local Policies
User Rights Assignment Mange auditing and security log
Turned off firewall on DC and Exchange Server even stopped the service
Turned off all AV on the DC and Exchange Server
Checked I could telnet to global catalog servers on port 3268 which I can
Checked the global catalog records existed in DNS which they all do
Done the obvious ping tests all round which confirms connectivity
Schema has been prepared using appropriate commands before running the setup exe
setup.exe /PrepareSchema /IacceptExchangeServerLicenseTerms
Making sure the following path has full permissions:
EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
Restarted Microsoft Exchange Active Directory Topology service
DcDiag all looks good
What have I noticed that is suspicious?
Microsoft Exchange Transport service will not start even though both of its dependences services have started:
Microsoft Filtering Management Service
Microsoft Exchange Active Directory Topology Service
It will eventually error with
“Windows could not start the Microsoft Exchange Transport Service on local computer
Error 1053: This Service did not respond to the start of control request in a timely fashion”
This error is from the GUI wizard itself:
Error:
The following error was generated when "$error.Clear();
$maxWait = New-TimeSpan -Minutes 8
$timeout = Get-Date;
$timeout = $timeout.Add($maxWait);
$currTime = Get-Date;
$successfullySetConfigDC = $false;
while($currTime -le $timeout)
$setSharedCDCErrors = @();
try
Set-SharedConfigDC -DomainController $RoleDomainController -ErrorVariable setSharedCDCErrors -ErrorAction SilentlyContinue;
$successfullySetConfigDC = ($setSharedCDCErrors.Count -eq 0);
if($successfullySetConfigDC)
break;
Write-ExchangeSetupLog -Info ("An error ocurred while setting shared config DC. Error: " + $setSharedCDCErrors[0]);
catch
Write-ExchangeSetupLog -Info ("An exception ocurred while setting shared config DC. Exception: " + $_.Exception.Message);
Write-ExchangeSetupLog -Info ("Waiting 30 seconds before attempting again.");
Start-Sleep -Seconds 30;
$currTime = Get-Date;
if( -not $successfullySetConfigDC)
Write-ExchangeSetupLog -Error "Unable to set shared config DC.";
" was run: "System.Exception: Unable to set shared config DC.
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target, Boolean reThrow, String helpUrl)
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
at Microsoft.Exchange.Management.Deployment.WriteExchangeSetupLog.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)".
Exchange logs which have been written:
**The error will loop around for 8 minutes on trying to set-sharedconfig DC whatever this is trying to do ??
[01/20/2015 17:13:20.0084] [2] Active Directory session settings for 'Set-SharedConfigDC' are: View Entire Forest: 'True', Configuration Domain Controller:mydomain.com', Preferred Global Catalog: 'mydomain.com', Preferred Domain Controllers:
'{ mydomain.com}'
[01/20/2015 17:13:20.0084] [2] User specified parameters:
-DomainController:mydomain.com' -ErrorVariable:'setSharedCDCErrors' -ErrorAction:'SilentlyContinue'
[01/20/2015 17:13:20.0084] [2] Beginning processing Set-SharedConfigDC
[01/20/2015 17:13:20.0178] [2] The call to Microsoft Exchange Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error. Error details No Minimal Required Number of Suitable Directory Servers
Found in Forest mydomain.com Site Default-First-Site and connected Sites..
[01/20/2015 17:13:20.0178] [2] No Minimal Required Number of Suitable Directory Servers Found in Forest mydomain.com Site Default-First-Site and connected Sites.
[01/20/2015 17:13:20.0178] [2] The call to Microsoft Exchange Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error. Error details No Minimal Required Number of Suitable Directory Servers
Found in Forest mydomain.com Site Default-First-Site and connected Sites..
[01/20/2015 17:13:20.0178] [2] No Minimal Required Number of Suitable Directory Servers Found in Forest mydomain.com Site Default-First-Site and connected Sites.
[01/20/2015 17:13:20.0178] [2] Ending processing Set-SharedConfigDC
[01/20/2015 17:13:20.0193] [2] Beginning processing Write-ExchangeSetupLog
[01/20/2015 17:13:20.0193] [2] An error ocurred while setting shared config DC. Error: The call to Microsoft Exchange Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error. Error details
No Minimal Required Number of Suitable Directory Servers Found in Forest mydomain.com Site Default-First-Site and connected Sites..
[01/20/2015 17:13:20.0193] [2] Ending processing Write-ExchangeSetupLog
[01/20/2015 17:13:20.0193] [2] Beginning processing Write-ExchangeSetupLog
[01/20/2015 17:13:20.0193] [2] Waiting 30 seconds before attempting again.
[01/20/2015 17:13:20.0193] [2] Ending processing Write-ExchangeSetupLog
[01/20/2015 17:13:50.0195] [2] Beginning processing Write-ExchangeSetupLog
[01/20/2015 17:13:50.0273] [2] [ERROR] Unable to set shared config DC.
[01/20/2015 17:13:50.0273] [2] [ERROR] Unable to set shared config DC.
[01/20/2015 17:13:50.0288] [2] Ending processing Write-ExchangeSetupLog
[01/20/2015 17:13:50.0288] [1] The following 1 error(s) occurred during task execution:
[01/20/2015 17:13:50.0288] [1] 0. ErrorRecord: Unable to set shared config DC.
[01/20/2015 17:13:50.0288] [1] 0. ErrorRecord: System.Exception: Unable to set shared config DC.
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target, Boolean reThrow, String helpUrl)
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
at Microsoft.Exchange.Management.Deployment.WriteExchangeSetupLog.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)
[01/20/2015 17:13:50.0288] [1] [ERROR] The following error was generated when "$error.Clear();
$maxWait = New-TimeSpan -Minutes 8
$timeout = Get-Date;
$timeout = $timeout.Add($maxWait);
$currTime = Get-Date;
$successfullySetConfigDC = $false;
while($currTime -le $timeout)
$setSharedCDCErrors = @();
try
Set-SharedConfigDC -DomainController $RoleDomainController -ErrorVariable setSharedCDCErrors -ErrorAction SilentlyContinue;
$successfullySetConfigDC = ($setSharedCDCErrors.Count -eq 0);
if($successfullySetConfigDC)
break;
Write-ExchangeSetupLog -Info ("An error ocurred while setting shared config DC. Error: " + $setSharedCDCErrors[0]);
catch
Write-ExchangeSetupLog -Info ("An exception ocurred while setting shared config DC. Exception: " + $_.Exception.Message);
Write-ExchangeSetupLog -Info ("Waiting 30 seconds before attempting again.");
Start-Sleep -Seconds 30;
$currTime = Get-Date;
if( -not $successfullySetConfigDC)
Write-ExchangeSetupLog -Error "Unable to set shared config DC.";
" was run: "System.Exception: Unable to set shared config DC.
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target, Boolean reThrow, String helpUrl)
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
at Microsoft.Exchange.Management.Deployment.WriteExchangeSetupLog.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)".
[01/20/2015 17:13:50.0288] [1] [ERROR] Unable to set shared config DC.
[01/20/2015 17:13:50.0288] [1] [ERROR-REFERENCE] Id=AllADRolesCommonServiceControl___ee47ab1c06fb47919398e2e95ed99c6c Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
[01/20/2015 17:13:50.0288] [1] Setup is stopping now because of one or more critical errors.
[01/20/2015 17:13:50.0288] [1] Finished executing component tasks.
[01/20/2015 17:13:50.0304] [1] Ending processing Install-BridgeheadRole
Windows Event Viewer:
Process Microsoft.Exchange.Directory.TopologyService.exe (PID=5276) Forest mydomain.com. Exchange Active Directory Provider couldn't find minimal required number of suitable Global Catalog servers
in either the local site 'Default-First-Site' or the following sites:Hi apl228,
1. Please make sure the IPv6 is enabled.
2. Please make sure the account that install Exchange server has Administrator permission.
3. Please make sure DNS has been configured correctly.
Thanks
Mavis Huang
TechNet Community Support -
[Oracle][ODBC SQL Server Driver][libssclient22]General network error
I am using oracle gateway (11.1) for sqlserver on Linux platform with Oracle Server 10g.
I am getting following error when i run any select query:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Oracle][ODBC SQL Server Driver][libssclient22]General network error. Check your network documentation.[Oracle][ODBC SQL Server Driver][libssclient22]ConnectionOpen (connect()).[Oracle][ODBC SQL Server Driver]Invalid connection string attribute
ORA-02063: preceding 2 lines from SQLSERVER
Another thing is, i have created a ODBC DSN named as "sqlserver" as well. This configuration works fine when "program" parameter is set to dg4odbc in Listener.ora. But with dg4msql, it gives error.
Followings are the configuration files:
initsqlserver.ora
# HS init parameters
HS_FDS_CONNECT_INFO=database_machine:1433//test_master
HS_FDS_TRACE_LEVEL=OFF
HS_FDS_RECOVERY_ACCOUNT=RECOVER
HS_FDS_RECOVERY_PWD=RECOVER
listener.ora
SID_LIST_sqlserver =
(SID_LIST =
(SID_DESC =
(SID_NAME = sqlserver)
(ORACLE_HOME = /u01/app/oracle/product/11.1.0.6.0/gateway)
(PROGRAM = dg4msql)
sqlserver =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = Server_Machine )(PORT = 1522))
(ADDRESS = (PROTOCOL = IPC)(KEY = PNPKEY))
tnsnames.ora
SQLSERVER =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = Server_Machine)(PORT = 1522))
(CONNECT_DATA =
(SID = sqlserver)
(HS = OK)
)Hi,
The error you get is because your HS_FDS_CONNECT_STRING is not correct:
Be sure you can ping the SQL SERVER name from the Oracle Server,or use TCP/IP address
Check the port, it is not necessary 1433.
You can use the instance name insted of port:
HS_FDS_CONNECT_STRING=server_ip_address/instance_name/database_name
Be careful, in the LISTENER.ORA, you must specify the Gateway machine and not the SQL SERVER machine:
sqlserver =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = Gateway_Machine )(PORT = 1522)) <====you must specify Oracle Gateway machine
(ADDRESS = (PROTOCOL = IPC)(KEY = PNPKEY))
Idem for TNSNAMES.ORA:
SQLSERVER =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = Gateway_Machine)(PORT = 1522))
(CONNECT_DATA =
(SID = sqlserver)
(HS = OK)
Regards
Mireille -
Can't open HTTP server socket on port 50000 in dispatcher
We get the following message in the console_log for the dispatcher.
ID000544: Error starting service http. Can't start the service due to java.io.IO
Exception: Can't open HTTP server socket on port 50000
[ServiceManager]: ID000544: Error starting service http. Can't start the service
due to java.io.IOException: Can't open HTTP server socket on port 50000
[Framework -> criticalShutdown] Service http startup error!
Anyone have any ideas what might be the problem?
Thanks,
KeithHello Keith,
this errors occurs when the port http 50000 is already taken. Please could you check if this port on your machine is free or an other dispacther instance is already started on same machine. You can change the port in sap j2ee config tool (dispatcher-> services->http)
Best Regards,
Fabrice -
What is "Missing Port Information" error?
Setting FINEST log level on JAXRPC in the AS8 2004Q04 Beta reveals nothing.
Searches on this forum provides only 3 matches for "Missing port information" (this one makes 4). In http://forum.java.sun.com/thread.jsp?forum=136&thread=508958 the same problem that I have is described, and the problem is left unresolved, despite a plea from a second user. ( I wonder what happened to these people...Did they sell short or become .NET developers. Neither are an answer for me. )
Searches in the bug parade shows that this error is generic: In 6157880, classpath was not set correctly. In 4859401, service used a J2SE 1.4 API in a 1.3 environment. In 4802443 there is a getter for a public field and so jaxrcp was confused. There are more bugs matching but I'm not listing them all here. My point is that there doesn't seem to be a single root cause for this problem.
So, logs don't help, forum doesn't have answer, bug parade is too noisy. This problem seems unresolved here on Sun's web pages, but here I try again:
Here are some questions:
1) What is "port information"?
2) From where is it missing? Where does AS8 expect to find it?
3) Anyone have a strategy on how to debug this?
I have Axis TCPMON tracing the soap messages and can verify that AS8 originates the error, not the client. The limited information from the server log verifies this too:
[#|2004-11-01T16:28:20.008-0500|SEVERE|sun-appserver-pe8.1|javax.enterprise.resource.webservices.rpc.server.http|_Thre
adID=11;|JAXRPCSERVLET22: no endpoint specified|#]Here is the output of a client that dumps the exception:
[java] Endpoint address = http://Stratocaster:8080/ym/ym-alias
[java] javax.xml.rpc.soap.SOAPFaultException: JAXRPCSERVLET28: Missing port information
[java] at com.sun.xml.rpc.client.StreamingSender._raiseFault(StreamingSender.java:515)
[java] at com.sun.xml.rpc.client.StreamingSender._send(StreamingSender.java:294)
[java] at svcp.XXXAPIR0501_Stub.create2(XXXAPIR0501_Stub.java:282)
[java] at SubClient.main(SubClient.java:31)I believe I've gotten to the bottom of this error and will report it here in case there is anyone that is also having this problem and in case there is anyone that can make sense of it.
The alias and endpoint fields must be equal.
The deploy tool allows you to enter an alias and an endpoint for your web service. I'll show you the user interface specifics below. The data you enter in these fields show up in the wsdl, the web.xml and the sun-web.xml, and I'll show what elements below.
Except for the preceding '/' in the alias field (the '/' is inserted by deploytool), the alias and the endpoint string must be identical: if '/imp-alias' is the alias value, the endpoint must be 'imp-alias'.
If they are not equal and your client uses the alias value in endpoint address, you will get "Missing port information" error.
If they are not equal and your client uses the endpoint value in endpoint address, you will get '404 Not Found' error.
For example, lets say I set alias to 'api-alias' and endpoint to 'api-endpoint'. Using my browser, I can get the wsdl with http://localhost:8080/context/api-alias?wsdl (where context is also a value set in deploytool gui). The returned wsdl will show that the soap:adress location attribute is: http://localhost:8080/context/api-endpoint. If your client uses the wsdl to generate stubs, the default endpoint is this location and your client will get the '404 Not Found' error. If you client provides an endpoint address by setting the ENDPOINT_ADDRESS_PROPERTY to http://localhost:8080/context/api-alias, your client will get the "Missing port information" error.
You get to the alias and endpoint fields in deploytool from the File panel on the left. Open the subfolder that represents your war file. There will be your web service. Select the web service and the main panel will change to contain about 4-6 tabs. One tab labelled Aliases another tab labelled Endpoint.
The alias field shows up in the web.xml file like this:
<servlet-name>APIImpl</servlet-name>
<url-pattern>/api-alias</url-pattern>
</servlet-mapping>The endpoint field show up in the web.xml file under the same servlet-mapping element as alias:
<servlet-name>APIImpl</servlet-name>
<url-pattern>/api-endpoint/__container$publishing$subctx/*</url-pattern>
</servlet-mapping>The endpoint field shows up in the wsdl in the soap:address element's 'location' attribute:
<soap:address location="http://localhost:8080/context/api-endpoint" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"/>The endpoint field shows up in the sun-web.xml file
<endpoint-address-uri>api-endpoint</endpoint-address-uri>John -
Hi,
EPM version: EPM 11.1.2.1
When we are using Zoom In Level as All Levels and tring to drill down for dimention of HFM application we are getting below error.
Error: "Cannot connect to the provider. Make sure it is running in the specified host/port. Error (12031)"
As we found some solution from comunity , we have performed below workaround but still we are getting same error.
· We have done the changes in mod_wl_ohs.conf file of OHS with (WLIOTimeoutSecs 3600 and WLIOSocketTimeoutSecs 3600)
· And then restarted OHS and APS service but still we found same error.
Could anyone please suggest ,where can we trace its log from web server and the solution for this issue?
Thanks,
D.N. RanaHi,
We have already performed the changes for APS in OHS as mentioned in the solution and the path also same as under OHS.
Intially we were getting error for "to increase netRetryCould and NetRetryInterval" as a solution we have added below 3 registry DWORD keys under path
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Internet Settings
"KeepAliveTimeout"=dword:00180000 (26 Minutes)
"ReceiveTimeout"=dword:00dbba00 (240 Minutes)
"ServerInfoTimeout"=dword:00180000 (26 Minutes)
Above error resolved but then we received Error"12031"
Now we have added above 3 DWORD keys under path HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings
and now we are not getting the error "12031".
But here we are not getting how it(LB issue) resolved with above solution?
Thanks,
D.N.Rana -
Cannot find the CMS server running on port 6400?
Hi all,
I can see all the servers running on bo xi 2 other than the CMS server. If i start running using Administorator nor through the windows administration it displays the message
"Cannot find the CMS server running on port 6400?"
Can anyone explain me how to recitify this issue ?
Thanks
PoojaOn the CMS server launch the CCM and then the CMS is likely red (not started) try to manually start it, if it fails check windows event viewer for errors to see why it failed. Could be the service account (try local system if not specified already).
Regards,
Tim -
No database connector has been specified - Error code:-2147467259 error
Hi,
Iu2019m trying to populate a report and preview it using JRC. Iu2019m using the JRC jar files versions from CR XI R2 SP4. I have created a report using locale data source xml file and scheme file. I can preview the report from Crystal Report Designer without any probelm. When I try to preview the same layout using my Java application I get the error " No database connector has been specified.---- Error code:-2147467259 Error code name:failed " when I try to set the table location (reportClientDoc.getDatabaseController().setTableLocation(tables.getTable(i),table);) I even get this when I try to set the date source (reportClientDoc.getDatabaseController().setDataSource(xmlDataSet, " FND_SESSION_REP/FNDSESSION", "FND_SESSION_REP/FNDSESSION");) I tried shifting the order of setDataSource and setTableLocation but that didnu2019t help as well.
Can you please help me?
Thanks you in advance.
Regards,
Chanaka
Code to set connection info
public void setDBLogonXML(String xmlFilePath, String xsdFilePath)
final String SERVER_TYPE = "XML";
final String CONVERT_MULTIVALUE_TO_TABLE="false";
final String DATABASE_DLL = "crdb_xml.dll";
try {
Tables tables = reportClientDoc.getDatabaseController().getDatabase().getTables();
//Set the datasource for all main report tables.
for (int i = 0; i < tables.size(); i++) {
ITable table = tables.getTable(i);
//Keep existing name and alias.
table.setName(table.getName());
table.setQualifiedName(table.getQualifiedName());
table.setAlias(table.getAlias());
//Change connection information properties.
IConnectionInfo connectionInfo = table.getConnectionInfo();
//Set new table connection property attributes.
PropertyBag propertyBag = new PropertyBag();
propertyBag.put("Server Type", SERVER_TYPE);
propertyBag.put("Database DLL",DATABASE_DLL );
propertyBag.put("Local XML File",xmlFilePath);
propertyBag.put("Local Schema File",xsdFilePath);
String conString = "Local XML File=s("+xmlFilePath+");Local Schema File=s("+xsdFilePath+")";
propertyBag.put("Connection String",conString);
connectionInfo.setAttributes(propertyBag);
table.setConnectionInfo(connectionInfo);
//Update old table in the report with the new table.
reportClientDoc.getDatabaseController().setTableLocation(tables.getTable(i),table);
catch(ReportSDKException ex) {
System.out.println(ex);
catch(Exception ex) {
System.out.println(ex);
Main programu2026..
setDBLogonXML("D:\\Reports\\Current Sessions.xml","D:\\Reports\\FndSessionRep.xsd");
xmlDataSet = new XMLDataSet(new ByteArray(xmlFile), new ByteArray(xsdFile));
reportClientDoc.getDatabaseController().setDataSource(xmlDataSet, "FND_SESSION_REP/FNDSESSION", "FND_SESSION_REP/FNDSESSION");
Error Stack
- JRCAgent1 detected an exception: No database connector has been specified.
at com.crystaldecisions.sdk.occa.report.lib.ReportSDKException.throwReportSDKException(Unknown Source)
at com.businessobjects.reports.sdk.b.e.a(Unknown Source)
at com.businessobjects.reports.sdk.b.e.a(Unknown Source)
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
at com.crystaldecisions.proxy.remoteagent.y.a(Unknown Source)
at com.crystaldecisions.proxy.remoteagent.r.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.cf.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.z.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ak.if(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ad.int(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.bk.for(Unknown Source)
at com.crystaldecisions.proxy.remoteagent.v.a(Unknown Source)
at com.crystaldecisions.proxy.remoteagent.v.if(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.DatabaseController.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.DatabaseController.setTableLocation(Unknown Source)
at com.crystaldecisions.reports.sdk.DatabaseController.setTableLocation(Unknown Source)
at jrc_xml_test_app_01.testDlg.setDBLogonXML(testDlg.java:378)
at jrc_xml_test_app_01.testDlg.jButton3ActionPerformed(testDlg.java:117)
at jrc_xml_test_app_01.testDlg.access$200(testDlg.java:23)
at jrc_xml_test_app_01.testDlg$3.actionPerformed(testDlg.java:67)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1849)
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2169)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
at java.awt.Component.processMouseEvent(Component.java:5501)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3135)
at java.awt.Component.processEvent(Component.java:5266)
at java.awt.Container.processEvent(Container.java:1966)
at java.awt.Component.dispatchEventImpl(Component.java:3968)
at java.awt.Container.dispatchEventImpl(Container.java:2024)
at java.awt.Component.dispatchEvent(Component.java:3803)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3892)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
at java.awt.Container.dispatchEventImpl(Container.java:2010)
at java.awt.Window.dispatchEventImpl(Window.java:1778)
at java.awt.Component.dispatchEvent(Component.java:3803)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:153)
at java.awt.Dialog$1.run(Dialog.java:525)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: No database connector has been specified.---- Error code:-2147467259 Error code name:failed
- JRCAgent1 received request: setDataSourceRequest
- command SETUP: Create Data Connection
- command PERFORM: Create Data Connection
- -- command is undoable -> purge redo stack
- command SETUP: Set Data Connection Property
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: No database connector has been specified.---- Error code:-2147467259 Error code name:failed
at com.crystaldecisions.sdk.occa.report.lib.ReportSDKException.throwReportSDKException(Unknown Source)
at com.businessobjects.reports.sdk.b.e.a(Unknown Source)
at com.businessobjects.reports.sdk.b.e.a(Unknown Source)
- command PERFORM: Set Data Connection Property
at com.businessobjects.reports.sdk.b.e.a(Unknown Source)
- -- command is NOT UNDOABLE -> purge undo stack
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
- --- Purging command Create Data Connection
at com.crystaldecisions.proxy.remoteagent.y.a(Unknown Source)
- command SETUP: Set Data Connection Property
at com.crystaldecisions.proxy.remoteagent.r.a(Unknown Source)
- command PERFORM: Set Data Connection Property
at com.crystaldecisions.sdk.occa.report.application.cf.a(Unknown Source)
- JRCAgent1 detected an exception: No database connector has been specified.
at com.crystaldecisions.sdk.occa.report.application.DatabaseController.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.lib.ReportSDKException.throwReportSDKException(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.DatabaseController.setDataSource(Unknown Source)
at com.businessobjects.reports.sdk.b.e.a(Unknown Source)
at com.crystaldecisions.reports.sdk.DatabaseController.setDataSource(Unknown Source)
at com.businessobjects.reports.sdk.b.e.a(Unknown Source)
at jrc_xml_test_app_01.testDlg.jButton3ActionPerformed(testDlg.java:121)
at com.businessobjects.reports.sdk.b.e.a(Unknown Source)
at jrc_xml_test_app_01.testDlg.access$200(testDlg.java:23)
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
at jrc_xml_test_app_01.testDlg$3.actionPerformed(testDlg.java:67)
at com.crystaldecisions.proxy.remoteagent.y.a(Unknown Source)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1849)
at com.crystaldecisions.proxy.remoteagent.r.a(Unknown Source)
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2169)
at com.crystaldecisions.sdk.occa.report.application.cf.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.DatabaseController.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.DatabaseController.setDataSource(Unknown Source)
at com.crystaldecisions.reports.sdk.DatabaseController.setDataSource(Unknown Source)
at jrc_xml_test_app_01.testDlg.jButton3ActionPerformed(testDlg.java:121)
at jrc_xml_test_app_01.testDlg.access$200(testDlg.java:23)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
at java.awt.Component.processMouseEvent(Component.java:5501)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3135)
at java.awt.Component.processEvent(Component.java:5266)
at java.awt.Container.processEvent(Container.java:1966)
at java.awt.Component.dispatchEventImpl(Component.java:3968)
at jrc_xml_test_app_01.testDlg$3.actionPerformed(testDlg.java:67)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1849)
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2169)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
at java.awt.Component.processMouseEvent(Component.java:5501)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3135)
at java.awt.Container.dispatchEventImpl(Container.java:2024)
at java.awt.Component.processEvent(Component.java:5266)
at java.awt.Component.dispatchEvent(Component.java:3803)
at java.awt.Container.processEvent(Container.java:1966)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
at java.awt.Component.dispatchEventImpl(Component.java:3968)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3892)
at java.awt.Container.dispatchEventImpl(Container.java:2024)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
at java.awt.Component.dispatchEvent(Component.java:3803)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3892)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
at java.awt.Container.dispatchEventImpl(Container.java:2010)
at java.awt.Window.dispatchEventImpl(Window.java:1778)
at java.awt.Component.dispatchEvent(Component.java:3803)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
at java.awt.Container.dispatchEventImpl(Container.java:2010)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
at java.awt.Window.dispatchEventImpl(Window.java:1778)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
at java.awt.Component.dispatchEvent(Component.java:3803)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:153)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
at java.awt.Dialog$1.run(Dialog.java:525)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:153)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
at java.awt.Dialog$1.run(Dialog.java:525)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
No database connector has been specified.
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)Post Author: ililal
CA Forum: Data Connectivity and SQL
I spoke directly with Business Objects. They said,"Sun Application Server 8.2 is not supported." -
We are using the Azure server for our web services. Server is generating an error "Unable to connect to the remote server". What is this error means
Hello,
Did you means that you use the Windows Azure Virtual Machine DNS name as the server name in the Reporting Server Web Services URL?
For example:
Report server:http://uebi.cloudapp.net/reportserver
Report manager:http://uebi.cloudapp.net/reports
If you want to connect to Report Manager on the virtual machine from a remote computer, you should create a virtual machine TCP Endpoint and open the port in the virtual machine’s firewall. By default, the report server listens for HTTP requests
on port 80.
Reference:http://msdn.microsoft.com/en-us/library/jj992719.aspx#bkmk_ssrs_connect_2_remote_RM
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support -
The iphone software update server could not be contacted" - error message recieved when i try to update to 5.1.1 via itunes , what can i do ?
Dear Lawrence Finch:
If you're still around I hope you see this message, as you're the FIRST person (after reading every link, thread, other sites, apple support articles, etc.) to mention JB may be causing this iTunes popup window to REPEATEDLY occur:
"The iPhone software update server could not be contacted."
No, I did not hack anything (are you kidding? Grannies don't hack!), but I unknowingly bought a 3Gs iOS 3.1 from ebay that was not advertised as JB. Since it is like brand new, I was going to keep it (because my old backup is iOS 3.1.2) & was trying to simply restore & update, which (I thought) would remove the JB (that's what everybody says at forums, etc).
Instead, after "erasing all settings/content" (inside phone's Settings to get the prior person's name out of there), it is now stuck in White Apple Mode.
Put it in DFU/Recovery Mode & connect to iTunes but that stupid above message keeps appearing & I have already read/tried EVERYTHING to get rid of that message, starting with:
1. OLD phones (3Gs) with OLD iOS 3.1+ should work FINE with OLD Mac (iBook) with OLD OSX (Tiger 10.4.11) with OLD iTunes (9.2.1[5]). So that can't be the problem.
Here's all the other things apple & others say to check which I already checked:
2. USB ports are FINE, both work FINE, so that's not the problem.
3. No "extra USB devices" are connected, ONLY a mouse, & then the phone (yes, I tried it w/o the mouse connected but that didn't help).
4. No "usb hubs."
5. Latest iTunes for this OSX has already been DL'd (iTunes 9.2.1[5]). If you know of a newer one for this OSX, please advise.
6. No antivirus software.
7. No security software.
8. No routers; only 1 comcast modem, period. Wired Ethernet.
9. No wifi gadgets, no wifi at all.
10. No firewalls, except what is on iBook in the SHARING/System-Prefs. section. It's turned OFF.
11. Did the hosts/terminal thing sudo nano whatever it was. There were only 3 lines, NO gs.apple.com:
xxxxx local host
xxxxx broadcast host
xxxx local host
Oh, & btw, ATT officially unlocked this phone (after I filled out their online forms) but I can't finish the process via iTunes to get their Confirmation that "Device is Now Unlocked," so I can use T-Mo.
So that's it. If you have any other ideas of what to do from here, since from your comment, maybe it's the stupid JB on this phone that is causing the problem (???), please advise.
Many thanks! -
Problems starting WL Server V6 on port 80
Hello.
We are currently running WL Server V6 under Solaris 5.8 on port 7110.
Would like to switch the server to run under port 80. I've done the following:
Created a new unix machine called "test" with Post-Bind UID enabled and the
Post-Bind UID=weblogic (the id with which we start weblogic). Also enabled the
Post-Bind GID (staff - the default group of the weblogic id).
Then, pointed my server to "machine = test" and "listen port = 80".
When I start the weblogic server I get the following error:
<Emergency> <WebLogic Server>
Unable to create a server socket for port:80 jave.net.BindException
Permission denied. Perhaps another is using 80.
When I telnet to that system on port 80, I get a "connection refused" so am
pretty sure nothing is running on port 80.
Seems to me like there is a step missing someplace (to allow setuid/setgid).
Any help/suggestions appreciated.
Thanks.
ML Wahl
[email protected]Which user is running the startWebLogic.sh script?
http://www.weblogic.com/docs51/admindocs/properties.html#setuid
ml wahl wrote:
Hello.
We are currently running WL Server V6 under Solaris 5.8 on port 7110.
Would like to switch the server to run under port 80. I've done the
following:
Created a new unix machine called "test" with Post-Bind UID enabled and
the
Post-Bind UID=weblogic (the id with which we start weblogic). Also
enabled the Post-Bind GID (staff - the default group of the weblogic id).
Then, pointed my server to "machine = test" and "listen port = 80".
When I start the weblogic server I get the following error:
<Emergency> <WebLogic Server>
Unable to create a server socket for port:80 jave.net.BindException
Permission denied. Perhaps another is using 80.
When I telnet to that system on port 80, I get a "connection refused" so
am pretty sure nothing is running on port 80.
Seems to me like there is a step missing someplace (to allow
setuid/setgid).
Any help/suggestions appreciated.
Thanks.
ML Wahl
[email protected]
Maybe you are looking for
-
I just set up an account at the I tunes store including authorization to charge my pay pal abount. I have also received e-mail confirmation that the account is set up, but every time I try to make a purchase I get a message that says apple ID has not
-
External tables in Oracle 11g database is not loading null value records
We have upgraded our DB from Oracle 9i to 11g... It was noticed that data load to external tables in 9i is rejecting the records with null columns..However upgrading it to 11g,it allows the records with null values. Is there are way to restrict loadi
-
[SOLVED] Slight issue concerning pacman & bash completion
Hi all, I've come across a small issue when using the -Rs option with pacman. The auto completion doesn't appear to be working for the first package name passed after the -Rs option. For example, when issuing the command pacman -Rs firefox and pressi
-
How to send HTML emails with embedded graphics?
I've discovered Mail is great for sending HTML if you open it in Safari and select "Mail Contents of this Page" - - My problem is, I need to include the graphic elements as embedded images rather than hosted images. Is there any way to do this with M
-
OWB 904 doesn't use DB Links in mapping scripts
I'm having trouble deploying mappings because they don't use the generated DB Links in the mapping scripts. Normally when deploying a mapping I get this warning that certainly is correct since it can't find the source table: VLD-2771: System privileg