JNet for ABAP - Graphic Network

Hi Gurus!
My problem is that i need to show the HR structure in a Graphic Network.
There's a webdynpro component called WDR_NETWORK_TEST which is using JNet.
How can I create a file to be used by JNet for ABAP with the TAGs I need?
I suppose that the CL_WD_NETWORK has to be used but I don't know how... Any ideas?
Thanks

Hi,
I think CL_WD_NETWORK is not for creating Tags.
I am creating with[ iXML objects|http://help.sap.com/saphelp_nw04/Helpdata/de/86/8280ba12d511d5991b00508b6b8b11/content.htm] in ABAP. May be it worths to read [this|http://sapwiki.iwoars.net/index.php/XML_lesen_mit_ABAP] too.
ANd you can find the Shcema [here|http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/com.sap.km.cm.docs/lw/webdynpro/jnet_jgantt%20developer%20documentation/schema/jnet.xsd].
Have fun and good luck,
Gyula

Similar Messages

Jnet in abap webdynpro

Hello,
is there any samples or documentation on how to use jnet in abap webdynpro.
regards
kaushik

There are samples for the Network UI element and the Gantt chart UI element:
You can find examples of this UI element in the system in the Web Dynpro application WDR_TEST_UI_ELEMENTS, in the component WDR_TEST_EVENTS in the NETWORK view, and in the component WDR_NETWORK_TEST.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/f5/248841a79f1609e10000000a155106/frameset.htm
You can find an example of this UI element in the system in component WDR_TEST_EVENTS in the GANTT view, and in the component WDR_GANTT_TEST.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/68/248841a79f1609e10000000a155106/frameset.htm
There is also a general JNET developers' guide:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/42/cdfa0f0a8d136fe10000000a1553f7/frameset.htm

When we wil go for abap mapping ??

Hi,
As we know there are graphical, XSLT, JAVA mappings are there apart from ABAP mapping. I have gone through below weblog.
/people/udo.martens/blog/2006/08/23/comparing-performance-of-mapping-programs
and also help.
http://help.sap.com/saphelp_nw04/helpdata/en/12/05731a10264057badc32d3d3957015/frameset.htm
None of them says ABAP mapping is either faster or stable as compared to other mappings. Even though it is the case, still when we will go for abap mapping ??
Is it like that it is totally depend on the available resources in hand ??
thanks
kumar

> The SAP XI/PI mapping is the most efficient as it
> only loads the part of the source message that are
> used to create the target message(s) at runtime.
>
> Java and XSLT have to load the whole message into
> memory to process the message. This can be
> inefficient and if dealing with large messages can
> cause issues.
About your statement.
If you consider the field mapping (or UDF) runtime, then you are correct. But if you consider the whole mapping runtime, you also have to "load" the full message in message mapping, obviously. What happens is that it is transparent to the developer, since loading and parsing is done by standard. But message mapping also deals with loading and parsing the whole message (and it is done with Java underneath). Then I don't think message mapping will have a significantly better/worse performance, when compared with Java mappings (performing normal xml processing methods).
As for XSLT, the performance problems happens because you have a XSLT processor running over Java VM. Then, if you have heavy load on it, the mapping runtime will consume the resources necessary to run the xslt processor (which is, by itself, very resource consuming) and also to treat that heavy input.
Regards,
Henrique.

WebGL Renderer & GPU Accelerated Windows Blocked for your Graphics because of unresolved driver issues

I am using Windows XP SP 2. My mother board is ASUS F1A55-MLX Plus, Processor: AMD A4-3400 APU with Radeon HD Graphics 2.70 GHz, 2GB DDR3 DIMM 1333 MHz RAM and 500 GB SATA HDD. I am using FF version 8. However, on some websites I cannot see the whole page on my 15" CRT Samsung color monitor. For the fact the slider at the bottom of the web page is not visible to move further left or right.
At '''Trouble Shooting Information''' the contents are detailed below:
Application Basics
Name
Firefox
Version
8.0
User Agent
Mozilla/5.0 (Windows NT 5.1; rv:8.0) Gecko/20100101 Firefox/8.0
Profile Directory
Open Containing Folder
Enabled Plugins
about:plugins
Build Configuration
about:buildconfig
Crash Reports
about:crashes
Extensions
Name
Version
Enabled
ID
Modified Preferences
Name
Value
browser.places.smartBookmarksVersion
2
browser.startup.homepage_override.buildID
20111104165243
browser.startup.homepage_override.mstone
rv:8.0
browser.tabs.warnOnClose
false
extensions.lastAppVersion
8.0
gfx.blacklist.direct2d
3
gfx.blacklist.layers.direct3d10
3
gfx.blacklist.layers.direct3d10-1
3
gfx.blacklist.layers.direct3d9
3
gfx.blacklist.layers.opengl
3
gfx.blacklist.webgl.angle
3
gfx.blacklist.webgl.opengl
3
network.cookie.lifetimePolicy
2
network.cookie.prefsMigrated
true
places.database.lastMaintenance
1327382612
places.history.expiration.transient_current_max_pages
47671
privacy.donottrackheader.enabled
true
privacy.sanitize.migrateFx3Prefs
true
privacy.sanitize.sanitizeOnShutdown
true
Graphics
Adapter RAM
Unknown
Adapter Drivers
vga framebuf vga256 vga64k
Adapter RAM (GPU #2)
Unknown
Adapter Drivers (GPU #2)
Unknown
WebGL Renderer
Blocked for your graphics card because of unresolved driver issues.
GPU Accelerated Windows
0/1. Blocked for your graphics card because of unresolved driver issues.
'''Enabled Plugins'''
Shockwave Flash
File: NPSWF32.dll
Version: 11.1.102.55
Shockwave Flash 11.1 r102
MIME Type Description Suffixes
application/x-shockwave-flash Adobe Flash movie swf
application/futuresplash FutureSplash movie spl
Shockwave for Director
File: np32dsw.dll
Version: 11.6.3.633
Adobe Shockwave for Director Netscape plug-in, version 11.6.3.633
MIME Type Description Suffixes
application/x-director Shockwave Movie dir,dxr,dcr
Windows Media Player Plug-in Dynamic Link Library
File: npdsplay.dll
Version: 3.0.2.629
Npdsplay dll
MIME Type Description Suffixes
application/asx Media Files *
video/x-ms-asf-plugin Media Files *
application/x-mplayer2 Media Files *
video/x-ms-asf Media Files asf,asx,*
video/x-ms-wm Media Files wm,*
audio/x-ms-wma Media Files wma,*
audio/x-ms-wax Media Files wax,*
video/x-ms-wmv Media Files wmv,*
video/x-ms-wvx Media Files wvx,*
Microsoft® DRM
File: npdrmv2.dll
Version: 9.0.0.3250
DRM Netscape Network Object
MIME Type Description Suffixes
application/x-drm-v2 Network Interface Plugin nip
Microsoft® DRM
File: npwmsdrm.dll
Version: 9.0.0.3250
DRM Store Netscape Plugin
MIME Type Description Suffixes
application/x-drm Network Interface Plugin nip
'''about:buildconfig'''
Source
Built from http://hg.mozilla.org/releases/mozilla-release/rev/d03b51a9b2bd
Build platform
target
i686-pc-mingw32
Build tools
Compiler Version Compiler flags
d;D:\mozilla-build\msys\mozilla-build\python25\python2.5.exe -O e;D:\mozilla-build\msys\builds\moz2_slave\rel-m-rel-w32-bld\build\build\cl.py cl 14.00.50727.762 -TC -nologo -W3 -Gy -Fdgenerated.pdb -we4553 -DNDEBUG -DTRIMMED -Zi -Zi -UDEBUG -DNDEBUG -GL -wd4624 -wd4952 -O1
d;D:\mozilla-build\msys\mozilla-build\python25\python2.5.exe -O e;D:\mozilla-build\msys\builds\moz2_slave\rel-m-rel-w32-bld\build\build\cl.py cl 14.00.50727.762 -TP -nologo -W3 -Gy -Fdgenerated.pdb -wd4800 -we4553 -DNDEBUG -DTRIMMED -Zi -Zi -UDEBUG -DNDEBUG -GL -wd4624 -wd4952 -O1
Configure arguments
--enable-application=browser --enable-update-channel=release --enable-update-packaging --enable-jemalloc --enable-tests --enable-official-branding

@mha007. I was able to update to version 10.0.1 via Help > About Firefox. Like John99 says it was updated a couple of days ago. However, the problem of WebGL and GPU still remains. I have asked my system supplier to check the same.
@zerofire. I have always built my computer and 'am a great fan of AMD. I hate Intel's blue Death Signs. We here in India do not like anything automated on our PC other than antivirus and antimalware along with pre-scheduled running of CCleaner and Defraggler. Once in a while I run CCleaner's Registry Cleaner. Even Windows Security Alerts are turned off. Windows XP and SP2 for PC and Windows 2000 for server are the most used. Not interested in SP3 or Vista as the transcription work I do requires me to just have XP or SP2. May later add on Windows 7 via dual booting.

Possibilities Web Dynpro for ABAP versus JAVA

Hello,
I would like to know whether WebDynpro for ABAP and Java have the same options, abilities and possibilities. e'm I able to produce the same results with WebDynpro for ABAP as Java. I would like to standardize on just one of the two and be sure that it will to limit me later.
Thanks in advance.

Hi Maurice,
If you make have to make a choice you have to consider the followings:
- Which release do you have? Java version is available since 6.30/6.40, the ABAP only as of 7.00.
- Performance. If you have your WD4ABAP and backend (eg ERP) in the same system you gain a lot of performance
- Other small difference, that Java version has a much nicer graphical editor, which I miss from the ABAP version
These are, which came to my mind.
Best regards,
Peter

Webdynpro for ABAP call non-SAP webservice

Hi,
We have a WAS 7.0 ABAP only, Can we use webdynpro for ABAP to call a Notes's webservice or Weblogic's webservice.
Where can I get the document link?
Edited by: Jeff Lien on Jan 8, 2008 10:47 AM
Edited by: Jeff Lien on Jan 8, 2008 10:49 AM

Hi this will help u.
Web Dynpro ABAP
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/db22242d-0701-0010-28a2-aeaa1fefd706
Hope that the following also helps you.
Web Dynpro for ABAP (WD4A, WDA) is the SAP standard UI technology for developing Web
applications in the ABAP environment. It consists of a runtime environment and a graphical
development environment with special Web Dynpro tools that are integrated in the ABAP
Workbench (SE80).
Web Dynpro offers the following advantages for application developers:
The use of declarative and graphical tools significantly reduces the implementation
effort
Web Dynpro supports a structured design process
Strict separation between layout and business data
Reuse and better maintainability by using components
The layout and navigation is easily changed using the Web Dynpro tools
Stateful applications are supported that is, if the page is changed and the required
data remains intact so that you can access it at any time throughout the entire
application context.
Note that stateless applications are not possible.
Automatic data transport using data binding
Automatic input check
Automatic operation of the Web Dynpro application using the keyboard
User interface accessibility is supported
Full integration in the reliable ABAP development environment
Web Dynpro Architecture
Definition
Web Dynpro is the SAP NetWeaver programming model for user interfaces (UIs).
The Web Dynpro model is based on the Model View Controller paradigm, and has the
following features that build on the classic dynpro model:
Clear separation of business logic and display logic
Uniform metamodel for all types of user interfaces
Execution on a number of client platforms.
Extensive platform independence of interfaces
Structure
Metamodel Concept
Web Dynpro provides support for developing Web representation of a business application.
You use specific tools to describe the properties of a Web Dynpro application in the form of
Web Dynpro metadata. The necessary source code is then generated automatically and
executed at runtime. In addition to the events offered by the framework, you can also define
your own events for a Web Dynpro application. However, the event handling must always be
programmed in separate source code areas which are executed automatically when the event
is triggered at runtime.
In Web Dynpro, each user interface is always made up of the same basic elements. These
elements of the metamodel can be statically declared using Web Dynpro tools.
It is also possible to implement elements of the metamodel at runtime and to change them or
reintegrate them at runtime. Using these implementations, you can make any changes or
enhancements to a user interface that has been created by declarative methods by
generating new interface structures at runtime.
This means that you can combine declarative processes and the implementation of source
code.
Graphical Development Tools
To support this declarative concept, both the SAP NetWeaver Developer Studio and the
ABAP Workbench contain a range of Web Dynpro tools. You can therefore generate a large
proportion of a Web Dynpro application using the tools provided, without having to create your
own source code. This applies to the following parts of the application:
Data flow between the front end and back end
Layout of the user interface
Properties of user interface elements
The Web Dynpro tools enable you to create source text areas manually within generated
source texts. These areas are not changed if the source code is regenerated.
Separation of Business and Application Logic
Using Web Dynpro enables a clear separation of business logic and display logic. A Web
Dynpro application runs on the front end and has local or remote access to the back end
system via a service. This means that the display logic is contained in the Web Dynpro
application, while the business logic and the persistence of the business objects run in the
back end system. The following options are currently available for connecting Web Dynpro
applications and the back-end system:
An interface generated using adaptive RFC, through which BAPIs of an SAP system
can be called
An interface for calling Web services
A self-generated interface
The source code required for connecting the Web Dynpro application can be generated
from a UML definition of the Web Dynpro interface. A UML definition can be imported
into the Web Dynpro tools as an XML file.
Conversion of the Model-View-Controller
Conversion of the Model-View-Controller Programming Model
Every Web Dynpro application is structured according to the Model View Controller
programming model:
The model forms the interface to the back end system and thus enables the
Web Dynpro application access to data.
The view is responsible for the representation of the data in the browser.
The controller lies between the view and the model. The controller formats
the model data to be displayed in the view, processes the user entries made by the
user, and returns them to the model.
/people/thomas.jung/blog/2006/06/20/web-dynpro-abap-demonstration-videos
http://help.sap.com/saphelp_nw04s/helpdata/en/77/3545415ea6f523e10000000a155106/frameset.htm
with regards,
Hema.
pls give points if helpful.

Web Dynpro for ABAP @ SDN Wiki

Dear users and developers of Web Dynpro for ABAP!
I'd like to invite you to Web Dynpro page in SDN Wiki launched recently.
<a href="https://wiki.sdn.sap.com/wiki/display/WDABAP">Wiki page for Web Dynpro ABAP</a>
It's really great place for all WD Forum FAQ, HowTo and other frequently referenced materials, useful links, tips, hints etc.
Never again bother with answering the same question twice - put it the Wiki!
I'd like to thank SAP Network team who finally came up with this great tool for knowledge transfer!
Regards,
Serguei

premkumarwow wrote:
Hello,
>
> I am new to webdynpro and am sorry if i am re-posting the same question or if asking a basic question. I did go through the link Web Dynpro for ABAP @ SDN Wiki and am atleast confident of how to start a development .
>
> I have couple of queries. We are implementing webdynpro first time for our client. The client want to know if :
> 1. The user must log in to SAP each time to view the output
> 2. Or can they view the output via browser without having to login to SAP at all,
>
> After going through few posts, am aware that output can be viewed via browser but the client says none of their users will type in user id and password while logging in ( Meaning it will be an automatic login).
>
> Can they view the output in a browser without opening SAP and can it be set so that they do not type in User id and password( I am not aware how but currently for logggin into SAP, they do not have to type in their id information).
>
> Your replies will be of great help to start with.
>
> Regards,
> Prem
Adding to what sanasrinivas wrote above...user will have to login the again if your application opens in a GUI interface and from that GUI screen you are opening some report in Browser.
Remember that T-codes made for wda can execute both in GUI and Browser, If you execute them in Browser you wont have to login again and again but yes, if you execute 1 application in GUI and open some other t-code in browser , you will have to enter the login details again...so if you want to have hassle free execution you will have to open the reports in browser always.
regards,
Sahai.S

What is used for WebDynpro for ABAP?

hi all friends,,
what is used for WebDynpro for ABAP?
Thanks,
S.Suresh.
Title was edited by:
        Alvaro Tejada Galindo

Hi
Web Dynpro for ABAP - Getting Started
Web Dynpro for ABAP is SAPs new standard UI technology for developing user interfaces in the ABAP environment. In the long term Web Dynpro for ABAP will be the successor of the traditional screen (Dynpro) based user interface technology which is based on the SAP GUI. Available with NetWeaver 7.0 (2004s) Web Dynpro for ABAP provides the same declarative UI development paradigm as Web Dynpro for Java directly out of the NetWeaver ABAP Application Server. Web Dynpro for ABAP allows the development of user interfaces directly within the ABAP Workbench (SE80) and the Web Dynpro runtime environment is a central part of the ABAP server and can be used in any SAP solution based on NetWeaver 7.0 (2004s) without the need of an additional server installation.
Web Dynpro for ABAP allows the development of user interfaces in a declarative way by providing a mighty framework which abstracts the rendering technology from the core UI definition tasks. The Web Dynpro developer declares the layout and behavior of the UI without caring about HTML, JavaScript, browser specifics or the HTTP protocol. Instead the focus lies on designing graphically Web Dynpro components based on the Model View Controller model, which enforces a clear separation between the UI layer and the underlying business logic.
This declarative Web Dynpro programming model enforces the developer to focus on the tasks of
Designing the layout of the visible views (where should the table be placed, do I need tabs, how should the button look?)
Declaring the flow and behavior of the application (flow between views, which event is triggered by which button click, etc)
Defining the data binding (which internal table is displayed in a specific table, etc)
Implementing the event handlers and controller methods.
Without making any assumption about the used rendering technology, like which browser should be supported or if the Web Dynpro application will be later displayed in a web browser via HTML at all or in another kind of client with completely different rendering capabilities.
The Web Dynpro Frameworks provides all important UI features directly out of the box:
All elements (tables, buttons, trees, dropdown list boxes, etc) necessary for state of the art user interfaces are provided by the Web Dynpro Framework in the form of predefined UI element libraries.
Complex features and behavior of UI elements.
Internationalization of the UI. All visible strings in a Web Dynpro ABAP UI are handled by the translation system and are translated in the same translation environment like other ABAP language dependent resources. All texts are displayed automatically at runtime, dependent of the users credentials.
Accessibility features are directly built into the framework and UI elements.
A unified rendering engine generates at runtime the data which is sent to the specific client application, which is not limited to browsers but includes the NetWeaver Business Client.
All this is available in the established environment of the ABAP application server and well known capabilities like the transportation and change management system, security environment, test and performance analysis tools or remote debugging can be used like in common ABAP development.
Learn about the Web Dynpro for ABAP technology with the resources below, and post your related questions and answers to the Web Dynpro forum.
Web Dynpro for ABAP: Sneak Preview
Download, License Key Documentation, and Installation Guide available here.
Web Dynpro for ABAP: Tutorials for Beginners
SAP NetWeaver Product Management provides this set of tutorials for getting started with Web Dynpro for ABAP technology.
SAP Help Portal: Web Dynpro for ABAP
This online SAP documentation goes into detail about Web Dynpro architecture and programming, Web Dynpro for ABAP administration and security, and more.
Web Dynpro - Not Just for Java Developers Anymore   (PDF 3.8 MB)
In this SAP Insider article, SAP Product Manager Karl Kessler describes the tools of Web Dynpro for ABAP and uses a simple flight report example to highlight new and updated tools in the familiar ABAP environment.
Community Contribution: WDA Tutorial I - Getting Started with Web Dynpro for ABAP   (PDF 2.5 MB)
Software Engineer Rich Heilman provides this step-by-step guide for developing a Web Dynpro for ABAP application.
Going into Details
Basic Concepts - Selection vs. LeadSelection
In this blog, Thomas Szuecs of the Web Dynpro for ABAP development team shows how selection and LeadSelection works in Web Dynpro for ABAP.
Web Dynpro for ABAP: Recreate the SE16 Data Browser   (PDF 386 KB)
In this tutorial, Thomas Jung of SAP NetWeaver Product Management shows how to create a data browser simulator using Web Dynpro for ABAP.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/80aef577-543f-2a10-d19c-d83a565efe37 [original link is broken]
<b><REMOVED BY MODERATOR></b>
Message was edited by:
        Alvaro Tejada Galindo

Installtion error NSP for Abap

Hi all,
I just downloaded the latest version of the sneak preview for abap and I tried to install it. The installation failed and so did the uninstall. It generated the following log:
(Mar 13, 2008 11:10:10 AM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, An error occurred and product installation failed. Look at the log file C:\SAPnsp\NSP\log.txt for details.
(Mar 13, 2008 11:10:10 AM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
STACK_TRACE: 15
ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
     at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
     at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
     at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllInstallationSteps(StepWrapperInstallFiles.java:177)
     at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.install(StepWrapperInstallFiles.java:268)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
     at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
(Mar 13, 2008 11:15:12 AM), Install, com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct, err, An error occurred and product uninstallation failed. Look at the log file C:\SAPnsp\NSP\log.txt for details.
(Mar 13, 2008 11:15:12 AM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
STACK_TRACE: 15
ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
     at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
     at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
     at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllUninstallationSteps(StepWrapperInstallFiles.java:192)
     at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.uninstall(StepWrapperInstallFiles.java:313)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.uninstallProductAction(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.processActionsFailed(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
     at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Any idea what went wrong and how to uninstall/fix it??
Regards,
Bert
Edited by: B. Wilbrink on Mar 13, 2008 12:40 PM

Hello Bert,
please check the steps of the first part of the following site to uninstall the failed installation --> link
After that please check your services-file under C:WINDOWSsystem32driversetc that there aren't any entries like NSP left.
At the end please restart your computer.
The reason for an error code=200 is often an missing network connection.
So is your computer already connected to an network and if not did you install the loopback-adapter first?
Also you should deactivate all installed firewall- or/and antivirus-programs while installing.
Regards,
Norman Schröder

Exporting Display Banners for Google Ad Network

I'm attempting to export display banners for the Google Ad Network, but Google will only allow Flash versions 4-10.1. Minimum export option for Flash Pro CC is 10.3. Surely someone has encountered and developed a workaround. Right?

That makes it easy enough . I had to edit out the personal info, you don't want the spiders to index your number and end up in the mega spam network db.
I wanted to check Flash CC out anyhow despite I spend 99% of my time in Flash Builder and just wanted to verify you can use 10.1 with it. Using the code above I was able to generate errors because StageVideo was introduced in 10.2.
Exporting Flash CC 64bit as FP10.1:
Exporting as 10.3 where StageVideo exists:
I'm running this on Desktop so no StageVideo exists for my graphics setup (Radeon HD6870).

How to create a node with attributes at runtime in webdynpro for ABAP?

Hi Experts,
         How to create a node with attributes at runtime in webdynpro for ABAP? What classes or interfaces I should use? Please provide some sample code.
I have checked IF_WD_CONTEXT_NODE_INFO and there is ADD_NEW_CHILD_NODE method. But this is not creating any node. I this this creates only a "node info" object.
I even check IF_WD_CONTEXT_NODE but i could not find any method that creates a node with attribute.
Please help!
Thanks
Gopal

Hi
   I am getting the following error while creating a dynamic context node with 2 attributes. Please help me resolve this problem.
Note
The following error text was processed in the system PET : Line types of an internal table and a work area not compatible.
The error occurred on the application server FMSAP995_PET_02 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: IF_WD_CONTEXT_NODE~GET_STATIC_ATTRIBUTES_TABLE of program CL_WDR_CONTEXT_NODE_VAL=======CP
Method: GET_REF_TO_TABLE of program CL_SALV_WD_DATA_TABLE=========CP
Method: EXECUTE of program CL_SALV_WD_SERVICE_MANAGER====CP
Method: APPLY_SERVICES of program CL_SALV_BS_RESULT_DATA_TABLE==CP
Method: REFRESH of program CL_SALV_BS_RESULT_DATA_TABLE==CP
Method: IF_SALV_WD_COMP_TABLE_DATA~MAP_FROM_SOURCE_DATA of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMP_TABLE_DATA~MAP_FROM_SOURCE of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMP_TABLE_DATA~UPDATE of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_VIEW~MODIFY of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMPONENT~VIEW_MODIFY of program CL_SALV_WD_A_COMPONENT========CP
My code is like the following:
TYPES: BEGIN OF t_type,
            CARRID TYPE sflight-carrid,
            CONNID TYPE sflight-connid,
         END OF t_type.
Data: i_struc type table of t_type,
dyn_node   type ref to if_wd_context_node,
rootnode_info   type ref to if_wd_context_node_info,
i_node_att type wdr_context_attr_info_map,
wa_node_att type line of wdr_context_attr_info_map.
      wa_node_att-name = 'CARRID'.
      wa_node_att-TYPE_NAME = 'SFLIGHT-CARRID'.
      insert wa_node_att into table i_node_att.
      wa_node_att-name = 'CONNID'.
      wa_node_att-TYPE_NAME = 'SFLIGHT-CONNID'.
      insert wa_node_att into table i_node_att.
clear i_struc. refresh i_struc.
select carrid connid into corresponding fields of table i_struc from sflight where carrid = 'AA'.
rootnode_info = wd_context->get_node_info( ).
rootnode_info->add_new_child_node( name = 'DYNFLIGHT'
                                   attributes = i_node_att
                                   is_multiple = abap_true ).
dyn_node = wd_context->get_child_node( 'DYNFLIGHT' ).
dyn_node->bind_table( i_struc ).
l_ref_interfacecontroller->set_data( dyn_node ).
I am trying to create a new node. That is
CONTEXT
- DYNFLIGHT
CARRID
CONNID
As you see above I am trying to create 'DYNFLIGHT' along with the 2 attributes which are inside this node. The structure of the node that is, no.of attributes may vary based on some condition. Thats why I am trying to create a node dynamically.
Also I cannot define the structure in the ABAP dictionary because it changes based on condition
Message was edited by: gopalkrishna baliga

Using the Execute Preloaded Option for ABAP Dataflows in SAP BODS

Hello All,
This is regarding the use of Advanced Option in SAP Application Type (ECC) Datastore settings in SAP BODS 4.2, where there are two options to select from for ABAP Execution Option property: (1)Generate and Execute and (2) Execute Preloaded. Since our ECC client is often locked by BASIS team even on DEV environment, we would like to make use of the second option 'Execute Preloaded' so that we could extract the data from ECC tables without having to ask the BASIS team to unlock the ECC client every time before extraction.
The problem is that we are getting an error upon generating and uploading the ABAP program to ECC client. I have searched the blogs and so far I have only found that there are certain ABAP programs or function modules that come with SAP BODS which need to be installed by BASIS team on ECC side to allow the ABAP dataflows to be generated and uploaded to ECC server. I would appreciate it if anyone could provide a list of which function modules BASIS needs to install on ECC or a blog that provides details around using this option.
So far, from the SAP BODS designer, we are performing below steps but getting an error upon generating and uploading the ABAP dataflow program:
1. Create a test ABAP Dataflow using SAP ECC datastore. Provide the ABAP program options.
2. Right click, select Generate ABAP Program.
3. Once the ABAP Program Generation Dialog box appears, check the box "Upload Generated Program".
4. Upon clicking OK, we are getting the following error:
The ABAP program <ZRTEST01> for ABAP data flow <RT_TEST_R3> (datastore <R3_DS>) was not uploaded: < RFC CallReceive error <Function /BODS/RFC_ABAP_INSTALL_AND_RUN: RFC_ABAP_MESSAGE- Exception condition "NOT_SUPPORTED_BY_GUI" trigger[SAP NWRFC 720][SAP Partner ### ][clientname][servername][accountname][4103]>. >.
Any help would be greatly appreciated.
Thanks,
Rizwan

All,
The BASIS team reviewed steps provided in the BODS document and attempted to install the Function Modules but now none of the BODS jobs would work. All BODS jobs are being terminted with the Syntax Error error when extracting data from ECC using ABAP dataflows:
17740 16404 R3C-150412 06/17/2014 9:38:46 AM |Data flow RT_DF_TEST_PC207
17740 16404 R3C-150412 06/17/2014 9:38:46 AM RFC CallReceive error <Function /BODS/RFC_ABAP_INSTALL_AND_RUN: RFC_ABAP_RUNTIME_FAILURE-(Exception_Key: SYNTAX_ERROR)- Syntax
17740 16404 R3C-150412 06/17/2014 9:38:46 AM error in program /BODS/SAPLBODS .[SAP NWRFC 720][SAP Partner 740 ][DEV1][Server][account][4103]>.
22052 20572 R3C-150412 06/17/2014 9:38:46 AM |Data flow RT_DF_TEST_PC207
22052 20572 R3C-150412 06/17/2014 9:38:46 AM RFC CallReceive error <Function /BODS/RFC_ABAP_INSTALL_AND_RUN: RFC_ABAP_RUNTIME_FAILURE-(Exception_Key: SYNTAX_ERROR)- Syntax
22052 20572 R3C-150412 06/17/2014 9:38:46 AM error in program /BODS/SAPLBODS .[SAP NWRFC 720][SAP Partner 740 ][DEV1][Server][account][4103]>.

I've got a MacBook pro 15' running 10.6.6. I want to use an external monitor for my graphic design work running Adobe software and thought I'd try an HD TV. I ran a Mini Display to HDMI lead to the TV but the picture quality was disappointing.

I've got a MacBook Pro 15' running 10.6.6. I want to use an external monitor for my graphic design work using Adobe software and thought I'd try an HD TV. I ran a Mini Display to HDMI lead to the TV but the picture quality was disappointing. I also tried a Mini Display to VGA lead and that wasn't much better. I tried all variations of resolutions in System prefs - Displays but nothing helped. Am I getting something wrong? Thanks all.

In addition to pixel density, you are up against the translation driver card in the TV.
If you read the fine print of computer-resolution-capability in the TV user guide, you will see a chart as tall as the manual page. At the top is the smallest resolution capable, at the bottom is the full use of the 1080p in the TV.
Mac falls into the top 25% of the page, maxing out at 1366x768 often. This is because the TV control card is expected to do too much of the work, but is not designed for computer-monitor processing.
I looked at the resolution charts on 2 TVs before deciding to buy a 1080p LCD monitor that has a TV interface/connector. Computer monitor first, TV second. But the thing is only 27 in. Good thing TV is not as important to me as it is to others.

Follow-up webdynpro for abap using portal theme nw2004s, sp12

Hello,
I wanted to get a follow up to this thread,
Re: webdynpro for abap using portal theme nw2004s, sp12
We are having a problem with the way reports developed in Web Dynpro for ABAP displayed in the portal (the pop-ups and dropdowns look out of wack). The issue appears when we wrap the reports into portal themes (either standard or custom). As per the thread (the link for which I posted above), the suggestion was to apply WDFORCEEXTERNALSTYLESHEET parameter to the WDP, however our system doesn't have this parameter in the system, but it seems like I can create my own parameter. Can some on give me all of the properties assigned to WDFORCEEXTERNALSTYLESHEET in table WDY_APP_PROP_DEF.
Thank you

Hi Brad, I was trying to apply the note 1033496 but our ABAP servers does not have the WDFORCEEXTERNALSTYLESHEET parameter available in WDY_APP_PROP_DEF table. All other notes are not applicable to our issue.
The portal is NW2004s SP12, the ABAP server is NW2004 SP11
Regards.
Message was edited by:
Aleks Ozerov

N4S: Web Dynpro for ABAP layout editor not working

Have problem in Layout editor in Web Dynpro for ABAP
I have installed NW04S Testdrive on 64bit Linux and able to login.
SE80 is working alright.
Next I create a Web Dynpro Comp. / Intf. and create a component.
I double click on the View name "V_Default" . The Layout editor opens on the right side. Change into Edit Mode.
The "View Elements" panel on the left side of layout editor is missing. This is where we select the various elements like "Textview" etc.
Even the right click on the "ROOTUIELEMENTCONTAINER" to insert elements using context menu does not work.
In summary I am not able to add any element in WD4A Layout screen.
Is there any special plugin required to be installed?
How to solve this problem?

you cannot develope Webdynpro for ABAP using ECC5
This is available with netweaver 2004s (WAS7.0) for which ramp up is going on right now and the general availability is expected sometime around 1st quarter for 2006.
Regards
Raja

JNet for ABAP - Graphic Network

Similar Messages

Maybe you are looking for