Job Chain question

Hi,
i want to schedule a job chain.
I 've created 4 chain steps.
The first perform an action and the second must be executed only if the first completed successfully.
The third must be executed only if the second ends successfully, etc.
The Chain_rule_2 is
CHAIN_STEP_1 Completed and CHAIN_STEP_1 SUCCEEDED
The chain_rule_3 is
CHAIN_STEP_2 Completed and CHAIN_STEP_2 SUCCEEDED
But the job is actually running because there isn't an end steps (I suppose).
End step must be done if all steps works fine or if only one failed.
Any ideas?
Thanks.

You can add rules in Chains:
Chain rules define when steps run, and define dependencies between steps. Each rule has a condition and an action. Whenever rules are evaluated, if a rule's condition evaluates to TRUE, its action is performed. The condition can contain Scheduler chain condition syntax or any syntax that is valid in a SQL WHERE clause. The syntax can include references to attributes of any chain step, including step completion status. A typical action is to run a specified step or to run a list of steps.
All chain rules work together to define the overall action of the chain. When the chain job starts and at the end of each step, all rules are evaluated to see what action or actions occur next. If more than one rule has a TRUE condition, multiple actions can occur. You can cause rules to also be evaluated at regular intervals by setting the evaluation_interval attribute of a chain.
Conditions are usually based on the outcome of one or more previous steps. For example, you might want one step to run if the two previous steps succeeded, and another to run if either of the two previous steps failed.
Scheduler chain condition syntax takes one of the following two forms:
stepname [NOT] SUCCEEDED
stepname ERROR_CODE {comparision_operator|[NOT] IN} integer
You can combine conditions with boolean operators AND, OR, and NOT() to create conditional expressions. You can employ parentheses in your expressions to determine order of evaluation.

Similar Messages

  • SAP CS 8.0 - question to parallel tasks in one job chain

    Dear all,
    I have a question about job chains in SAP CPS/Redwood
    We have a job chain like this:
    Job 1
         Job 1.1
                   Job 1.1.1
                   Job 1.1.2
         Job 1.2
                    Job 1.2.1
    The Jobs 1.1.1 and 1.1.2 should start  when the Job 1.1 is compled and don't have to wait until Job 1.2 is complete.
    How could I release it in Redwood in one job chain? Should I use a precondition in the job definition of 1.1 and 1.2?
    Thank you for your help.
    Best regards,
    Hans

    Assumptions :
    Job 1.1.1 and Job 1.1.2 are running in parallel.
    Job 1.1, job 1.2 are also running in parallel.
    Chain A -
    Step 1 - Job 1.1
    Step 2 - Job 1.1.1, Job 1.1.2 (these both will start as soon as Job 1.1 completes)
    Chain B -
    Step 1 - Job 1.2
    Step 2 - Job 1.2.1
    Chain C
    Step 1 - Job 1
    Step 2 - Chain A, Chain B (Chain A and Chain B will start as soon as Job 1 completes).
    Submit Chain C.
    Preconditions are usually  used to check the timewindow, for example , if you want to execute a step in a job chain, only if it is a Friday.
    thanks
    Nanda

  • Need informations about dependency scenario with job chains

    Hi,
    I created several job chains containing one ora mor scripts.
    Now I want to create dependencies between this job chains. For example : job chain 2 must begin when job chain 1 is finished, job chain 3 must begin when job chain 2 is finished etc...
    So my first question : how can I do that ? (create dependencies between job chains)
    Second point : all this job chains have not the same time periods : example : job chain 1 must execute every day, job chain 2 every monday, job chain 3 every day...... so if i take the example of tuesday : job chain 1 must execute and when it is finished then job chain 3 must execute. On Monday : job chain1, then job chain 2 and for finish job chain 3. How can I do that ?
    Edited by: kennel yves on Aug 19, 2009 12:27 PM

    Hi Yves,
    If your chains are not dependent on each other, you should submit them as separate jobs.
    So if you have a chain that runs every workday at 18:00, and another chain that runs on Tuesday and Friday at 14:00, and there are no dependencies between the chains, then you should:
    - submit the first chain at 18:00, time window "Workdays", submit frame "EveryDay"
    - submit the second chain at 14:00, time window "TuesdaysAndFridays", submit frame "EveryDay" (it will skip the days that the time window is closed anyway)
    Same for the other independent chains with different schedules. If there are no dependencies, there is no need to combine chains together.
    The first reply was for the scenario where you have chain A and B, A starts at some time and B starts after A. Additionally, B only runs on Tuesdays, while A runs every workday. In that case there are dependencies between the two chains, and then a parent chain is very convenient:
    - chain "RunAandB", with two steps
    - step 1: call chain A
    - step 2: call chain B, with a precondition so that B only runs on Tuesdays.
    Regards,
    Anton Goselink.

  • Any WebI reports / graphs for job chain performance over time?

    I am trying to get reports over time that contain job and job chain information such as job chain, job description, elapsed time, job status, etc to allow for trend reporting against the job schedules.  Thanks for any help.  I would have thought that there was some basic reporting that could execute and be saved for reporting and reference.

    Hi Robert,
    For WebI/Graph report, you need to create the Dashboard but it will not give details which you required. It will be created on basis over day, time and dialer. You can find the option there for Graph/Techno etc.
    If you want to create the report, please refer to below thread:
    Re: Question on Reporting
    CPS Report with Schedule and Job Parameter Information
    Regards,
    Abhishek Singh

  • Error while scheduling the Email Alert JOB chain

    Hi All,
    I have defined a job chain in CPS and when i am going to schedule it then it is giving me error message.We have taken the trial version.
    Please find the log attached below.
    11:18:31 PM:
    JCS-111004: Queue ETD.sapetd00_Queue has no ProcessServer with the required JobDefinitionType/Service/Resource for Job 932 (submitted from ETD.Z_MONI_BATCH_DP copy from 2009/12/30 18:22:23,113 Australia/Sydney) (submitted from Job Definition ETD.Z_MONI_BATCH_DP (Copy from 2009/12/30 18:22:23,113 Australia/Sydney)): Job Definition Type CSH/Service PlatformAgentService/"Empty"
    JCS-102064: Job 934 (submitted from System_Mail_Send copy from 2009/12/29 17:54:16,608 Australia/Sydney) is global but refers (via Job) to an object in an isolation group
    JCS-102064: Job 934 (submitted from System_Mail_Send copy from 2009/12/29 17:54:16,608 Australia/Sydney) is global but refers (via Chain Step) to an object in an isolation group
    JCS-102064: Job 934 (submitted from System_Mail_Send copy from 2009/12/29 17:54:16,608 Australia/Sydney) is global but refers (via Parent Job) to an object in an isolation group Show error details
    Thanks
    Rishi Abrol

    Hi
    Are you logged into the correct isolation group ?
    Ensure the process server is also assigned to the queue.
    Regards

  • Job Chaining and Quickcluster

    I always get
    Status: Failed - HOST [Macintosh.local] QuickTime file not found.
    after the first part of the job is successful.
    If I just submit with "This Computer" it works fine. Original file is ProRes 422, first job uses ProRes 422 to scale it down to 480x270. Second job compresses to h.264. I found some info on this board from 2008 saying that job chaining and quickclusters don't work together. Is that still how it is? that's really useless..
    I also found this from Jan 2009
    David M Brewer said:
    The reason the second rendering is failing is.......this has happen to me a few times until I figured it out.....make sure you set the dimension to the video in the h.264 settings, set to the same size as the Pro Rez dimensions.
    For the most part the dimensions are left blank for the second link, h.264. And don't use 100% of source. Put the physical numbers into the spaces. When you link one video to another, the second codec doesn't know the specs settings you made for the first video settings.
    Also make sure you (at least check) set the audio for the second video. I usually have the Pro Res do the audio conversion and just past-through to the second video settings. Again it can happen the the audio is disable in the h.264 settings. This has happen a few time for me........... Check and double check your settings!
    He doesn't mention anything about with or w/o Quickclusters, but I tried what he said and could not get it to work with quickclusters...
    Anyone got any new info on this?

    Studio X,
    Thanks for taking the time to run some tests and post your results.
    I'm finding the same results with converting ProRes422 to mp4, But...
    Other codecs are giving me very different results.
    I've run some random tests to try to get a grip on whats happening.
    First I was playing around with the # of instances. I've read here and on Barefeats that (at least for my model MacPro) the instances should be set to (# of processors/2), so I've been using 4 for quite a while now and thought I'd test it for myself.
    A single 5min ProRes422 1920x1080 29.97 file to h.264
    This Computer- 15:28
    2 Instances- 14:56
    3 Instances- 13:52
    4 Instances- 14:48
    5 Instances- 13:43
    6 Instances- 13:48
    7 Instances- 13:58
    In this case 5i was the fastest but not using a Quickcluster wasn't far off
    A single 2m30s ProRes422 1920x1080 29.97 file to h.264
    This Computer- 3:19
    2 Instances- 3:45
    3 Instances- 3:45
    4 Instances- 3:45
    5 Instances- 3:50
    6 Instances- 4:00
    7 Instances- 4:00
    Interesting...not using a Quickcluster is fastest
    A single 2m30s ProRes422 1920x1080 29.97 file Scaled down using original codec
    This Computer- 5:20
    4 Instances- 4:10
    5 Instances- 4:10
    7 Instances- 4:11
    A single 1m30s ProRes422 1920x1080 29.97 file to mpeg-2
    This Computer- 2:12
    5 Instances- 2:10
    When Quickclusters are faster, 4-5 instances does seem to be the sweet spot(again for my setup).
    In the mpeg-2 test, I should have used a longer clip to get a better test but it was getting late and I was just tring to get an idea of the codecs usage of my resources. I was also monitoring CPU usage with Activity Monitor in all tests.
    Now multiclip batches:
    I forgot to write down the length of the clips in this first test but it consisted of 8 ProRes 422 clips. 3 about 1m long and the rest between 13s and 30s
    8 ProRes 422 clips to mp4
    This Computer- 11:25
    4 Instances- 5:16
    Same results as Studio X
    Next tests with 5 clips(total 1m51s)
    5 ProRes 422 clips to h.264
    This Computer- 5:00
    4 Instances- 4:52
    5 ProRes 422 clips to mpeg-2
    This Computer- 2:55
    4 Instances- 3:01
    5 ProRes 422 clips to DV NTSC
    This Computer- 6:40
    4 Instances- 5:12
    5 ProRes 422 clips to Photo Jpeg
    This Computer- 2:44
    4 Instances- 2:46
    I re-ran the last test with 7 clips because of the time it took reassemble the segmented clips
    7 ProRes 422 clips to Photo Jpeg(total 3m14s)
    This Computer- 4:43
    4 Instances- 3:41
    One last test,
    A single ProRes 422 clip to Photo Jpeg(4:05;23)
    This Computer- 5:52
    4 Instances- 4:10
    Let me start off by saying it is clear that there are many factors that effect compression times such as # of clips, length of clips, and codecs, but here are some of the things I noted:
    1)Some codecs themselves seem to be "more aware" of the computers resources than others.
    When I compress to h.264 w/o a cluster it will use about 80-85% of all resources
    When I compress to h.264 with a cluster it will use about 90-95% of all resources
    When I compress to PhotoJpeg w/o a cluster it will use about 20-25% of all resources
    When I compress to PhotoJpeg with a cluster it will use about 80-85% of all resources
    2)The time it takes to reassemble clips can be quite long and could effect overall speed
    In the very last test, compressing a single file to photoJpeg using 4 instances took 4m10s. Watching Batch Monitor I noted that it took 2m0s to compress and 2m10s to reassemble.Wow...
    It would be interesting to see how the disassemble/reassemble of bigger and larger batches using clusters effect overall time. But that would take some time.
    I think the thing I will be taking with me from all of this is your workflow is your own. If you want to optimize it, you should inspect it, test it and adjust it where it needs adjusting. Now if anyone has the time and was to run similar tests with very different results I'd love to know about it...

  • How to Schedule a Job Chain to start automatically on SAP CPS.

    Hi,
    I did a job chain and i want to run automatically on sap cps Tuesday thru Saturday at 6:00 a.m., i make a calendar on sap cps with this specific options but the job chain doesn't start running.  I don't know if i need to do something more, so if someone can give a little help with this i will apreciate a lot.
    Thanks,
    Omar

    It finished ok but on the operator message i got the following message:
    Unable to resubmit this job.
    Details:
    com.redwood.scheduler.api.exception.TimeWindowExpectedOpenWindowException: CalculateNextClose should only be called on an open time window
    at com.redwood.scheduler.model.method.impl.TimeWindowMethodImpl.calculateNextCloseIntersectionInt(TimeWindowMethodImpl.java:388)
    at com.redwood.scheduler.model.method.impl.TimeWindowMethodImpl.calculateNextCloseIntersectInt(TimeWindowMethodImpl.java:249)
    at com.redwood.scheduler.model.TimeWindowImpl.calculateNextCloseIntersectInt(TimeWindowImpl.java:212)
    at com.redwood.scheduler.model.method.impl.SubmitFrameMethodImpl.calculateNextInt(SubmitFrameMethodImpl.java:178)
    at com.redwood.scheduler.model.SubmitFrameImpl.calculateNext(SubmitFrameImpl.java:176)
    at com.redwood.scheduler.model.listeners.JobStatusChangePrepareListener.resubmitSubmitFrameJob(JobStatusChangePrepareListener.java:763)
    at com.redwood.scheduler.model.listeners.JobStatusChangePrepareListener.resubmitJob(JobStatusChangePrepareListener.java:637)
    at com.redwood.scheduler.model.listeners.JobStatusChangePrepareListener.processJobToFinalState(JobStatusChangePrepareListener.java:520)
    at com.redwood.scheduler.model.listeners.JobStatusChangePrepareListener.modelModified(JobStatusChangePrepareListener.java:233)
    at com.redwood.scheduler.persistence.impl.LowLevelPersistenceImpl.informListeners(LowLevelPersistenceImpl.java:728)
    at com.redwood.scheduler.persistence.impl.LowLevelPersistenceImpl.writeDirtyObjectListRetry(LowLevelPersistenceImpl.java:207)
    at com.redwood.scheduler.persistence.impl.LowLevelPersistenceImpl.access$000(LowLevelPersistenceImpl.java:38)
    at com.redwood.scheduler.persistence.impl.LowLevelPersistenceImpl$WriteDirtyObjectListUnitOfWork.execute(LowLevelPersistenceImpl.java:79)
    at com.redwood.scheduler.persistence.impl.PersistenceUnitOfWorkManager.execute(PersistenceUnitOfWorkManager.java:34)
    at com.redwood.scheduler.persistence.impl.LowLevelPersistenceImpl.writeDirtyObjectList(LowLevelPersistenceImpl.java:102)
    at com.redwood.scheduler.cluster.persistence.ClusteredLowLevelPersistence.writeDirtyObjectList(ClusteredLowLevelPersistence.java:59)
    at com.redwood.scheduler.model.SchedulerSessionImpl.writeDirtyListLocal(SchedulerSessionImpl.java:648)
    at com.redwood.scheduler.model.SchedulerSessionImpl.persist(SchedulerSessionImpl.java:626)
    at com.redwood.scheduler.apiint.model.UnitOfWorkManager.perform(UnitOfWorkManager.java:32)
    at com.redwood.scheduler.apiint.model.UnitOfWorkManager.perform(UnitOfWorkManager.java:13)
    at com.redwood.scheduler.jobchainservice.JobChainService.childJobFinalStatus(JobChainService.java:223)
    at com.redwood.scheduler.core.processserver.ProcessServerRuntime.childJobFinalStatus(ProcessServerRuntime.java:836)
    at com.redwood.scheduler.core.processserver.ProcessServerRuntime.onMessage(ProcessServerRuntime.java:248)
    at com.redwood.scheduler.infrastructure.work.MessageEnabledWork.run(MessageEnabledWork.java:104)
    at com.redwood.scheduler.infrastructure.work.WorkerImpl.run(WorkerImpl.java:109)
    at java.lang.Thread.run(Thread.java:534)

  • Can we schedule steps in Job Chain to run at a particular time of the Day.

    Hi ,
    We have created a Job chain for 3 steps.our requirement is we want to step 1 to run as per the schedule of Job chain but we want  step2 to run on fri 2 gmt and step 3 to run on saturday 1 gmt.
    is ther any setting in Job chain so that we can schedule subsequent steps to run at a particular time.
    Regards
    Rajesh

    Hi,
    You can add a timewindow to the jobdefinitions that you call in step 2 and 3, to restrict the start times for these jobs to the desired time.
    Regards,
    Anton.

  • Scheduling a BI job chain in Redwood

    The problem I am having is we are trying to schedule a BI job chain via Redwood software and are not getting any response. Within Redwood, I have executed these jobs IMPORT_BW_CHAINS, IMPORT_BW_CHAIN_DEFINITION, IMPORT_BW_INFOPACKAGES using BI job chain  0fcsm_cm_10 which is defined in BI as a job chain. These jobs run to completion but nothing is moved into Redwood to schedule as you would see from a import of a CCMS job. When I run job RUN_BW_CHAIN using the same BI job chain ID I receive the below error.  Not sure what I’m missing or doing with the process to get to schedule the BI job chains with Redwood.
    ORA-06502: PL/SQL: numeric or value error
    ORA-06512: at "RSI.RSIEXEC", line 1638
    ORA-06512: at "RSI.RSIEXEC", line 1759
    ORA-06512: at "RSI.RSI_RUN_BW_CHAIN", line 21
    ORA-06512: at "RSI.RSI_RUN_BW_CHAIN", line 80
    ORA-06512: at line 1
    ORA-06512: at "SYS.DBMS_SYS_SQL", line 1200
    ORA-06512: at "SYS.DBMS_SQL", line 323
    ORA-06512: at "SYSJCS.DDL", line 1085
    ORA-06512: at "SYSJCS.DDL", line 1118
    ORA-06512: at "SYSJCS.DDL", line 1177
    ORA-06512: at line 3
    JCS-00215: in statement RSOJ_EXECUTE_JOB

    I am also seeing the same issue 
    anton the last information  you requested
    The following products are installed in the Cronacle repository:
    Product                                  Version    Status
    Cronacle for SAP solutions               7.0.3      Production 
    Cronacle Forecast Module                 7.0.3      Production 
    Cronacle Reports Module                  7.0.3      Production 
    Cronacle &module Module                  7.0.2      development
    Cronacle Mail Module                     7.0.3      Production 
    Cronacle Audit Module                    7.0.2 r2.2 Production 
    Cronacle Process Manager for Web         7.0.3      Production 
    Cronacle Module Installer                7.0.3      Production 
    Cronacle Repository                      7.0.3.34   Production 
    Cronacle Monitor Module                  7.0.3      Production

  • Error in redwood job chain for Infopackage

    Hi,
    We have recently installed redwood for handling sap jobs and are able to run all the job chains with job step in abap program successfully.
    However, for APO and BW job chains we have intermediate step for executing BW infopackage where the job is getting failed with the below error:
    SAP/BW Error Message: rfc call failed 089: Job BI_BTC<infopackage_name>has not (yet ?) been started        
    The preceding abap job steps are getting executed successfully. After the infopackage step is failed the consecutive steps all fails.
    This problem is common to all job chains with infopackage.
    Any help is greatly appreciated.
    Regards,
    Sandeep.

    Hello Anton,
    We are facing the same problem: Same log error message.
    The infopackage is correctly started and ended in BW.
    Here our versions:
    Redwood Explorer 7.0.4.2 SP2
    BW :   SAP_BASIS 70016
               SAP_BW 70018
    Do you think applying SAP CPS SP3 would solve the problem?
    Or can we solve it by modifying some specific parameters?
    Thanks in advance.
    Regards;
    Mathieu

  • Backing up Jobs, Chains and Programs in Oracle Job Scheduler

    What is the best way to back up Jobs, Chains and Programs created in the Oracle Job Scheduler via Enterprise Manager - and also the best way to get them from one database to another. I am creating quite a long chain which executes many programs in our test database and wish to back everything up along the way. I will also then need to migrate to the production database.
    Thanks for any advice,
    Susan

    Hi Susan,
    Unfortunately there are not too many options.
    To backup a job you can use dbms_scheduler.copy_job. I believe EM has a button called "create like" for jobs and programs but I am not sure about chains and this can be used to create backups as well.
    A more general purpose solution which should also cover chains is to do a schema-level export using expdp i.e. a dump of an entire schema.
    e.g.
    SQL> create directory dumpdir as '/tmp';
    SQL> grant all on directory dumpdir to public;
    # expdp scott/tiger DUMPFILE=scott_backup.dmp directory=dumpdir
    You can then import into a SQL text file e.g.
    # impdp scott/tiger DIRECTORY=dumpdir DUMPFILE=scott_backup SQLFILE=scott_backup.out
    or import into another database (and even another schema) e.g.
    # impdp scott/tiger DIRECTORY=dumpdir DUMPFILE=scott_backup
    Hope this helps,
    Ravi.

  • SQL Developer 3.1: Job Chains - 2 Bugs.

    Hi.
    Just having a play with defining job chains in SQL Developer 3.1 and I came across these bugs...
    1) When you try to define a new chain using SQL Developer you get, "ORA-01741: illegal zero-length identifier"
    If you look on the SQL tab you can see that it is messing up the double quotes, placing two sets of double quotes around the chain_name.
    BEGIN
        sys.dbms_scheduler.create_chain(
            comments => '',
            chain_name => '"TEST".""test_chain_3""'
          sys.dbms_scheduler.enable(name=>'"TEST".""test_chain_3""');
    END;If you remove the extra quotes and run the code it works fine.
    2) The job chain diagram seems to be case sensitive as far as the rule definitions are concerned.
    If you follow the chain setup in SQL*Plus described here (http://www.oracle-base.com/articles/10g/SchedulerEnhancements_10gR2.php#job_chains), then check the associated diagram in SQL Developer it is displayed properly.
    Now repeat the chain definition from SQL*Plus, but this time define the conditions and actions of the rules in lower case (which is valid and functions as expected).
    BEGIN
      DBMS_SCHEDULER.define_chain_rule (
        chain_name => 'test_chain_1',
        condition  => 'TRUE',
        action     => 'start chain_step_1',
        rule_name  => 'chain_rule_1',
        comments   => 'First link in the chain.');
      DBMS_SCHEDULER.define_chain_rule (
        chain_name => 'test_chain_1',
        condition  => 'chain_step_1 completed',
        action     => 'start chain_step_2',
        rule_name  => 'chain_rule_2',
        comments   => 'Second link in the chain.');
      DBMS_SCHEDULER.define_chain_rule (
        chain_name => 'test_chain_1',
        condition  => 'chain_step_2 completed',
        action     => 'start chain_step_3',
        rule_name  => 'chain_rule_3',
        comments   => 'Third link in the chain.');
      DBMS_SCHEDULER.define_chain_rule (
        chain_name => 'test_chain_1',
        condition  => 'chain_step_3 completed',
        action     => 'END',
        rule_name  => 'chain_rule_4',
        comments   => 'End of the chain.');
    END;
    /Now check the diagram again in SQL Developer and you will see that all the steps are present, but the links (rules) are not correctly displayed. Seems like it is case sensitive...
    If you need any more info, please ask.
    Cheers
    Tim...
    Edited by: TimHall on Feb 10, 2012 4:23 PM

    I have confirmed your two test cases are indeed bugs and I have raised them. The first seems to be if you have a mixture of _ and lowercase characters in the name but we will look at other cases too. The second is that the parsing of the condition/action does not uppercase unquoted ids. The second can be cirumvented by using quotes etc.

  • How to setup job chain with time dependant steps

    Hi
    I need to setup the following job chain with next job step waiting until specified time before starting
    Step 1 Job A Time 07:30 if complete go to job step 2
    Step 2 Job B start time 09:00 if complete go to job step 3
    Step 3 Job C start time 09:30 (end job)
    Have tried to use a pre-condition in step 2 and 3 but that just caused thoes steps to be skipped.
    can somebody point me in the right direction
    Thanks in advance
    Jon

    Hi Anton/Babu
    Thanks for your help, I managed to set this up by embedding multiple Job Chains with their own time window in a master job chain.
    As we continue our roll out not sure how scalable the solution will be as you have to create multiple job chains for essentially the same job with the only difference being a specific time window.
    I guess only time will tell.
    Thanks for you help again guys
    Jon

  • Restart/resubmit job chain waiting of a file event

    Hi Experts,
    how can I restart/resubmit a job chain waiting of a file event?
    In my case the variables OriginalPath and FinalPath are used in job chain parameters as an Default Expression (waitEvents...). If I restart the job chain I get the message "Could not evaluate default value for parameter...".
    We are using SAP-CPS Build M28.20-37214.
    Regards
    Mathias

    Hi,
    You probably want to restart it because there was a failure somewhere in the chain. In this case it is easier to not let the chain end in error, but to let it go to status Console using the "Request Restart" postcondition.
    Then when the step is restarted, or the chain is restarted from the beginning, it is restarted within the original chain and it reuses the already determined parameter values.
    Regards,
    Anton.

  • Steps max limit  in a Job Chain

    Hello experts,
    The SAP recommanded that the minimum number of steps in Job Chain for performance purpose.
    Can anybody tell , Is there any max limit on the number of steps in a Job chain?
    Thanks ,
    Suresh Bavisetti

    Can you reference the documentation where you see a minimum number of steps in a job chain recommended? I think there is no upper limit for the number of steps in a chain. How many steps are you thinking of adding?
    Or are you talking about nesting job chains within other job chains? Pleas eclarify if this is the case.
    Rgds,
    David Glynn

Maybe you are looking for

  • Keynote Presentation in iDVD

    I have a Keynote presentation from iWork 08. It has a video clip on one of my slides. I'd like to manually click through the slides. I export as Quicktime. But when I bring it in to iDVD and burn, I am not able to click through the slides. Rather, th

  • Movies and music on iTouch?

    I've downloaded and encrypted/decrypted a movie for iTouch compatibility. When I attempt to sync it through iTunes, it tells me that I have to clear off my music if I want the movie on it. Is there any way I can have just this one movie and my music

  • My screen reduces brightness while using apple tv, any suggestions?

    My screen reduces brightness while using my apple tv - any suggestions?

  • Macbook pro does not shut down or restart

    i have mid 2009 macbook pro. After i installed mavericks on it, everytime i let my computer stay on for more than 2 hrs or if i put it to sleep, it does not let me open any application. And also it doesnt restart or shut down. I can't copy, erase or

  • 10.8 mac can't send messages to ichat 6 10.7.3 mac

    so a friend of mine just got a new macbook pro. I am wanting to communicate with her on our macs. I have a macbook with 10.7.3 and ichat 6. When she sends me messages, they go to my iphone instead of ichat. When I turn off my iphone and she sends my