Job CLEAN_REQREQ_UP and BBP_GET_STATUS_2 does not update SC in SRM With PO

Hello,
We are on SRM 5.0 Classic scenario  R3 SAP  ECC 6.0. we recently had a stackupgrade for all our different components.
Aswe are in a classic scenario we get a prucahse requisition after a shopping cart is approved. The purchaser then creates a purchase order and the program  BBP_GET_STATUS_2 and CLEAN_REQREQ_UP updates the shopping cart  with the PO information.
For these 2 programmes we have created one Job. The problem  that we now encounter is that the job doesn't update the Shopping cart with the PO information. Only the purchase reuiqisition is visisble. If i go to transaction BBP_PD for that shopping cart i see Item in transfer process marked red. From  BBP_PD I can run BBP_GET_STATUS_2 and CLEAN_REQREQ_UP and the nthe shopping is updated.
So to summarize: The jobs (BBP_GET_STATUS_2 and CLEAN_REQREQ_UP ) do not update the shopping cart but running BBP_GET_STATUS_2 and CLEAN_REQREQ_UP  manually the Shopping cart is updated.
The users who running the jobs seem to be ok.
Any idea ?
Thanks

Hi,
Check this.
In the backend system, you activate the application SRMNTY in table TBE11 using transaction FIBF so that the purchase order follow-on data is transferred from the SAP backend to the SRM system. In this way, the SRM system is notified when follow-on documents are created in the backend system.
Check teh variant, Check if the Backend system has been changed, Run BDLS if changed
regards,
MRao
Edited by: Mahesh Rao T.C on Oct 14, 2010 12:31 PM

Similar Messages

  • Problem - I input a new event into my iPhone calendar and it does not update on my iMac or iPad. I have loaded the latest software on all devices and have switched over to iCloud. Suggestions?

    Problem - I input a new event into my iPhone calendar and it does not update on my iMac or iPad calendars. I have loaded the latest software on all devices and have switched over to iCloud. Suggestions?

    On the iMac open System Prerferences > iCloud
    Deselect the box next to Calendars then reselect then restart the iMac.
    On the iPad, tap Settings > iCloud
    Switch Calendars off then back on then reset the iPad.
    Hold the On/Off Sleep/Wake button and the Home button down at the same time for at least ten seconds, until the Apple logo appears.
    Hopefully the event synced over all the devices.

  • I delete my emailson computer or iPad and it does not update on my 4s. Is there something I am missing?

    If I delete my e-mails on my computer or iPad, it does not update my 4s.  Any suggestions?

    Wow.  That's weird.
    Is your iPad jailbroke?  If it is, all bets are off.  If it is not jailbroke, keep reading.
    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • Camera raw does not update to 8.5 with CC 2014 and windows 7

    Camera raw is 8.0 after the last update of CC2014?

    Please follow the below mentioned steps to resolve the issue:
    Quit and Relaunch CC app
            http://helpx.adobe.com/creative-cloud/kb/creative-cloud-connection-faq.html#id_10491
    Open the Adobe Creative Cloud application.
    Mac OS: Go to the Applications folder and open the Adobe Creative Cloud alias.
    Windows 7: Go to Start > All Programs > Adobe Creative Cloud
    Windows 8: Open the Adobe Creative Cloud application from the Start Screen.
    Click the Apps tab in the Adobe Creative Cloud applications.
    Click on All Apps, then Previous Version
    Your installed CC Product would be listed, Click on Install Drop-down and then select the CC 2014 to install.
    After Successful Installation, Update your Product
    Let me know if you are still not able to Update ACR.
    Regards,
    Ashutosh

  • My iphone 4 does not update. it comes up with an error

    itunes downloads the update. but when it comes to updating on my iphone, it shows an error message

    What's the error message? 

  • Manual Reposting of Costs (KB11N) does not update Profit Center

    When I do Manual Reposting of Costs on KB11N, the system does not update the Profit center with the value but it does update the Cost center.
    Please Help
    Thanks,
    Sindane

    Hi,
    Please check whether sender as well as receiver cost object is assigned to profit center. If this is done PCA document gets generated and update is made in respective Profit center.
    Bye,
    Ramesh

  • Help: Just finished shooting a wedding and Aperture crashes constantly during editing. All pic's in RAW and even after making sure I have the latest Aperture update, I have had to rebuild my library twice and "repair" does not seem to fix the issue. Help?

    Help: Just finished shooting a wedding and Aperture crashes constantly during editing. All pic's in RAW and even after making sure I have the latest Aperture update, I have had to rebuild my library twice and "repair" does not seem to fix the issue. Help?

    Well!
    If you have ThunderBolt, I would go with such for an External Working Drive, spinning platter or SSD depending on your budget
    This does not have to be huge just big enough to house your most current Jobs
    Once the Current Job is put to rest I would move it to a larger multi bay hard drive unit, USB or FireWire nothing fancy, no RAID, set up as one single Disk
    This would only be accessed when something is needed from a past Job so the connection does not have to be speedy
    The Drobo would be relegated to Vaults and backups
    You can set up a Vault on the Drobo to back up the External Working Library and then Reconnect it when you have moved the Library over to the other Enclosure
    This has worked for me pretty smoothly for a long while, but I have found over the years that one can not assume all people work in the same manner! :-)

  • Can't add music my iPhone from iTunes.  When I try to drag a song over to my phone, I get the circle w/ the syncing line through it, but it does not update/load.  [Manually manage music and videos] is checked. And, this is the only Mac I have ever used to

    Can't add music my iPhone from iTunes.
    When I try to drag a song over to my phone, I get the circle w/ the syncing line through it, but it does not update/load.
    [Manually manage music and videos] is checked. And, this is the only Mac I have ever used to add music to my phone.
    Also, just updated the phone's software today, and iTunes' software is already up to date.

    Hi Gregg,
    Have you tried resetting the device (nothing will be lost): Hold down the Home and Power buttons at the same time and continue to hold them down until the Apple appears (up to 30 seconds). Once the Home screen redisplays, see if your Music app is behaving normally.
    Cheers,
    GB

  • My ipod touch has a permanent image of the end of a USB cable with an arrow pointing to an icon of ITunes. I can't reset, and ipod does not appear on itunes when I plug it into the computer.  This happened after I agreed to a failed software update.

    My ipod touch has a permanent image of the end of a USB cable with an arrow pointing to an icon of ITunes. I can't reset using the two button method, and ipod does not appear on itunes when I plug it into the computer - and nothing else happens either.  This happened after I agreed to a software update which failed.  How can I get it going again?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Since I updated my 4S iphone to the latest iOS7 version, I can no longer close any of my apps.  As a result, all my apps remain open on my phone.  Even powering down and restarting does not solve the problem.  Specifically, the icons don't wiggle anymore.

    Since I updated my 4S iphone to the latest iOS7 version, I can no longer close any of my apps.  As a result, all my apps remain open on my phone.  Even powering down and restarting does not solve the problem.  Specifically, when I double-click the start button, my open app icons display.  But when I hold my finger on an icon, the apps do not wiggle and display an "x" to close.  Any advice... thanks?!

    Double tap the Home button, then swop upwards on the App Preview (not the App Icon). Tap the Home button again when done to return to normal screen.

  • I have Adobe photoshop cs5. need to update camera raw, cause my camera raw is  2010and does not read my camera,  I went out and downloaded the new one and it does not link to adobe photoshop cs5

    I have moved my Photoshop CS5 to my traveling computer,a Surface Pro 3.  I have photoshop loaded but in trying to look at raw images it says my camera raw does not support the sony alpha 65 which is what I have.  I went out and tried to download the newest raw version and even went out and did a zipfile download and it will not update my current version.  What should I do

    I have 6.0.  Tried to download newest verion and it will not download.  Went out and then downloaded a zipfile and it still will not download, thus cannot look at my raw pictures.
    Thanks, John
    m: gener7 
    Sent: Thursday, December 11, 2014 6:01 PM
    To: JOHN STAHLY
    Subject:  I have Adobe photoshop cs5. need to update camera raw, cause my camera raw is  2010and does not read my camera,  I went out and downloaded the new one and it does not link to adobe photoshop cs5
    I have Adobe photoshop cs5. need to update camera raw, cause my camera raw is  2010and does not read my camera,  I went out and downloaded the new one and it does not link to adobe photoshop cs5
    created by gener7 <https://forums.adobe.com/people/gener7>  in Photoshop General Discussion - View the full discussion <https://forums.adobe.com/message/7007148#7007148>

  • HT1277 Mail on my Mac computer does not update when I update my mail on my phone and iPad.  Can anyone help me with this?  Is there a setting I need to check?

    Mail on my Mac computer does not update when I update my mail on my iPhone and iPad. Can anyone help me with this?  Is there a setting that I need to check?

    All that you had to do was to sign into the old account in order to update those apps. What I mean is that you just needed to sign into that account in the store settings like I described and that should have worked. You didnt need to enter the credit card information again - you justed needed to use the old ID and password.
    Anyway, I think the good news is that if everything else is OK with the new account, just download iBooks with the new ID - it's a free app so its not like you have to pay for it again. I'm not sure what the other App is that you are talking about - but if it is the Apple Store App - that is free as well.
    Try this anyway, when you try to update iBooks, just use the old password if the old ID still pops up.
    Did you try signing into the store settings with your new ID and see what happens with the updates then?

  • Im using iphone 4 uk unlock , it has ios 4.2.1 and it does not have software update option.Now i want to update the phone with latest ios is it possible and tel me how ?

    Im using iphone 4 uk unlock , it has ios 4.2.1 and it does not have software update option.Now i want to update the phone with latest ios is it possible and tel me how ?

    The update to iOS 5.0 & higher is an erase/restore deal, so make sure you follow the directions here to update your phone:
    http://support.apple.com/kb/ht4972
    iOS 7.0.4 will be installed.

  • App hung on "waiting"; during update, I lost my wifi connection; now cannot delete to reinstall (no X), syc does not help; itunes store says it is installed and I cannot reinstall; deleting from itunes and synching does not remove "hung app"; HELP

    App hung on "waiting"; during update, I lost my wifi connection and the app hung; now cannot delete to reinstall (no X), synching does not help; itunes app store says it is installed, therefore I cannot reinstall; deleting the app from itunes and synching does not reinstall the app on the ipod; the app developers have not helped and told me to check with Apple (which I am doing, since I am past my 90 day tech support). Hoping someone can help with this hung "waiting' app problem.

    - First try resetting the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Next download the app on the computer and try to sync.
    - Last, restore from backup.

  • Unable to update, when executed table gets lock and Execution does not stop even for an hour.

    Following is my Query, which unables to update. When Executed, table gets lock and Execution does not stop even for an hour.
    update Employees 
          set Status = 'Close'
          where statusid IN (select statusid 
                                             from MyView 
                                              where DownloadedDate ='2014-07-27 00:00:00.000'
    here Employee contains 3,00,000 of records and Subquery return 1,50,000 Empid 
    i tried in various ways but not able to solve, statusid  column have no index on,  i tried using cursor but it does not work.
    plz let me know how to solve this Issue, Its very Important to get solve as all my further work depends on Updation
    , THANKS IN ADVANCE.

    See also your other thread with the same question:
    http://social.msdn.microsoft.com/Forums/en-US/80243625-fc3b-4ee1-bce1-4adcdbc16c14/unable-to-update-when-executed-table-gets-lock-execution-does-not-stop-execution-even-for-an-hour?forum=sqlserversamples
    Olaf Helper
    [ Blog] [ Xing] [ MVP]

Maybe you are looking for