JOB_CLOSE function module

Hi Experts,
I am calling the function module 'JOB_CLOSE' as follows passing 3 (job name, job count, start immediately) parameters.But it is failing and the sy-subrc value is 4 (job_close_failed = 4). Please tell me how to correct this.
CALL FUNCTION 'JOB_CLOSE'
    EXPORTING
      jobcount                          = v_jobcount
      jobname                           = v_jobname
     strtimmed                         = 'X'
   IMPORTING
     job_was_released                  = v_ok
   EXCEPTIONS
     cant_start_immediate              = 1
     invalid_startdate                 = 2
     jobname_missing                   = 3
     job_close_failed                  = 4
     job_nosteps                       = 5
     job_notex                         = 6
     lock_failed                       = 7
     invalid_target                    = 8
     OTHERS                            = 9          .
Thanks,
neethu.

Hi,
Please refer the sample code
ATA: P_JOBCNT LIKE TBTCJOB-JOBCOUNT,
      L_RELEASE(1) TYPE c.
   CALL FUNCTION 'JOB_OPEN'
     EXPORTING
       JOBNAME                = 'ZTEMP2'
    IMPORTING
      JOBCOUNT               = P_JOBCNT
    EXCEPTIONS
      CANT_CREATE_JOB        = 1
      INVALID_JOB_DATA       = 2
      JOBNAME_MISSING        = 3
      OTHERS                 = 4.
   IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
   ENDIF.
   SUBMIT ZTEMP2 VIA JOB 'ZTEMP2' NUMBER P_JOBCNT
          TO SAP-SPOOL WITHOUT SPOOL DYNPRO
          WITH DESTINATION = 'HPMISPRT'
          WITH IMMEDIATELY = SPACE
          WITH KEEP_IN_SPOOL = 'X' AND RETURN.
   CALL FUNCTION 'JOB_CLOSE'
     EXPORTING
       JOBCOUNT                          = P_JOBCNT
       JOBNAME                           = 'ZTEMP2'
       STRTIMMED                         = 'X'
       PRDMINS                          = 15
    IMPORTING
      JOB_WAS_RELEASED                  = L_RELEASE
    EXCEPTIONS
      CANT_START_IMMEDIATE              = 1
      INVALID_STARTDATE                 = 2
      JOBNAME_MISSING                   = 3
      JOB_CLOSE_FAILED                  = 4
      JOB_NOSTEPS                       = 5
      JOB_NOTEX                         = 6
      LOCK_FAILED                       = 7
      INVALID_TARGET                    = 8
      OTHERS                            = 9.
   IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
   ENDIF.
Hope it helps
Regards
Sumana

Similar Messages

Function Module to Release Scheduled Jobs

Dear All,
I have a requirement to create all the background jobs in SCHEDULED status, this is achieved by using the function modules JOB_OPEN, JOB_SUBMIT and JOB_CLOSE.
Now at a later point of time, i want to release only a few jobs, which were created using the above mentioned procedure. Insead of doing it manually, is there any way to automate this step ??
Regards,
kartik

Dear Mr. Parupalli,
That solved my problem. Thank you.
Regards,
kartik

Running Function Module in Background with Update Task is not working

Hello Friends,
I have a "Z" Report Program where I am running this Report in Background using JOB_OPEN, JOB_SUBMIT, JOB_CLOSE. I am calling this in BADI.
In this Report I am calling another Function Module PRICES_POST which is a standard Function Module and in this FM there is another FM 'CKML_UPDATE_MATERIAL_PRICE IN UPDATE TASK'. Now when I am running the BADI these values are not being updated.
Friends I would like to know whether can we run Function Modules which are included with UPDATE TASK as Background Job program?
Kindly help me in providing your valuable suggestions in proceeding further.
Thanks and Regards
Pradeep Goli

Usually the sequence of CALLs in your report should look like
CALL FUNCTION 'CM_F_INITIALIZE'
 EXPORTING
 msg_on_screen = c_x.
CALL FUNCTION 'CKMS_BUFFER_REFRESH_COMPLETE'.
CALL FUNCTION 'PRICES_CHANGE'
 EXPORTING
 actual_bdatj = f_matpr-pp-bdatj
 actual_poper = f_matpr-pp-poper
 bukrs = p_bukrs
 budat = p_date
 xblnr = p_xblnr
 TABLES
 t_matpr = t_matpr.
READ TABLE t_matpr WITH KEY pp-xerror = ' '
 TRANSPORTING NO FIELDS.
IF sy-subrc <> 0.
 MESSAGE i046(ckprch).
ELSE.
 CALL FUNCTION 'PRICES_POST'
 EXPORTING
 i_bktxt = p_bktxt
 bukrs = p_bukrs
 lis_update = 'X'
 TABLES
 t_matpr = t_matpr.
ENDIF.
COMMIT WORK.
If you forget the COMMIT-WORK each and every FM called in UPDATE TASK will not be triggered.
Regards,
Raymond

Scheduled function module in background job

HI all,
I have created a function module(RFC) & Now I need to schedule it in background job, i have used fm job_open ,job_close But through there i can only scheduled Reports so pls gide me how to scheduled fm .
regards,
Anuj

Hi Anuj,
Check this one:
Re: can i scheddule a function module(rfc) in background
Regards,
Chandra Sekhar

Function module-open_job

Hi ,
    i am using function module open_close ,close_job to run the program in the background in user-exit, when i execute the transaction everthing goes fine, but when i debug it it give me a dump , stating invalid startdate.
Thanks & Regards

hi,
    below is the code
        V_TIME = SY-UZEIT + 05.
To create a job for roll of revision
        CALL FUNCTION 'JOB_OPEN'
             EXPORTING
                  jobname          = v_jobnm
                  sdlstrtdt        = sy-datum
                  sdlstrttm        = v_time
             IMPORTING
                  jobcount         = v_jobcnt.
To run roll of revision
        IF sy-subrc = 0.
          submit zecr via job v_jobnm
          NUMBER v_jobcnt
          with p_matnr = v_matnr
          WITH p_aennr = v_aennr
           AND RETURN.
        ENDIF.
*end of submit
    CALL FUNCTION 'JOB_CLOSE'
         EXPORTING
              JOBCOUNT             = V_JOBCNT
              JOBNAME              = V_JOBNM
              SDLSTRTDT            = SY-DATUM
              SDLSTRTTM            = V_TIME.
i hope i have used the funciton modules in a right way,
where the error occured.
002760         ENDIF.
002770       WHEN 3.
     >         RAISE invalid_startdate.
i think this is an exception in the function module job_close.
Thanks & Regards
Syed

Executing a BDC Session using a Function Module from a Custom Z-Report

Hello,
          I have a requirement where I need to Create a BDC Session for the given Transaction Code. But instead of executing the Session from SM35 manually, I need to Execute the Session Immediately from my Custom Z-Report itself.
         Is there any Function Module for this Activity? Please let me know.
Thanks and Regards,
Venkata Phani Prasad K

1) fm job_open
2) submit report
3) fm job_close
4) finally select table TBTCO
example:
DATA: jobcount_test LIKE tbtcjob-jobcount,
        job_released    LIKE btch0000-char1,
        rcode(2),
        strtimmed LIKE btch0000-char1 VALUE 'X'.
DATA jobname LIKE tbtcjob-jobname.
CONCATENATE 'TEST_' sy-repid '_' sy-datum INTO jobname.
CALL FUNCTION 'JOB_OPEN'
       EXPORTING
            jobname          = jobname
       IMPORTING
            jobcount         = jobcount_test
       EXCEPTIONS
            cant_create_job = 1
            invalid_job_data = 2
            jobname_missing = 3
            OTHERS           = 4.
IF sy-subrc NE 0.
    MESSAGE x000(yp) WITH 'JOB-START ' jobname ' failed !!!'.
ELSE.
*--Step insert
    SUBMIT rsbdcsub
    USER sy-uname VIA JOB jobname NUMBER jobcount_test
    WITH mappe = map
    WITH von = pdatum
    WITH z_verarb = 'X'
    AND RETURN .
    CALL FUNCTION 'JOB_CLOSE'
         EXPORTING
              jobcount             = jobcount_test
              jobname              = jobname
              strtimmed            = strtimmed
              targetsystem         = sy-host
         IMPORTING
              job_was_released     = job_released
         EXCEPTIONS
              cant_start_immediate = 1
              invalid_startdate    = 2
              jobname_missing      = 3
              job_close_failed     = 4
              job_nosteps          = 5
              job_notex            = 6
              lock_failed          = 7
              OTHERS               = 8.
    IF sy-subrc > 1.
      MESSAGE x000(yp) WITH 'JOB-CLOSE ' jobname ' failed!!!'.
    ENDIF.
ENDIF.

Calling Function Module starting new job

Hallo !
I'm calling a 'Z' function module from a class method.
I want the calling will start immediately a new job.
(That I will see in SM37)
(Like we can do with submit statement)
Is there a way to this ?
(I need the function will start a job - because
I want to save the function log in the Job list.)
Thanks in advance,
N.S.

step : 1
Sample Program: Creating a Job with JOB_OPEN
explanation :
Use JOB_OPEN to create a background job. The function module returns the unique ID number which, together with the job name, is required for identifying the job.
Once you have "opened" a job, you can add job steps to it with JOB_SUBMIT and submit the job for processing with JOB_CLOSE.
Create your job with JOB_OPEN. The module returns a unique job
number. Together with the jobname, this number identifies the
job. Other parameters are available, but are not required.
JOBNAME = 'Freely selectable name for the job(s) you create'.
CALL FUNCTION 'JOB_OPEN'
EXPORTING
JOBNAME = JOBNAME
IMPORTING
JOBCOUNT = JOBNUMBER
EXCEPTIONS
CANT_CREATE_JOB = 01
INVALID_JOB_DATA = 02
JOBNAME_MISSING = 03
OTHERS = 99.
IF SY-SUBRC > 0.
<Error processing>
ENDIF.
step 2;
Sample Program: Adding an ABAP Job Step
explanation :
Use JOB_SUBMIT to add a job step to a background job that you have opened with JOB_OPEN.
A job step is an independent unit of work in a job, the execution of an ABAP or external program. Each job step can have its own authorizations user and printer/optical archiving specifications.
Add a job step: ABAP program
CALL FUNCTION 'JOB_SUBMIT'
EXPORTING
AUTHCKNAM = SY-UNAME " Runtime authorizations
" user
JOBCOUNT = JOBNUMBER " Value from JOB_OPEN
JOBNAME = JOBNAME " Value from JOB_OPEN
REPORT = 'REPORT' " Report to be run
VARIANT = 'VARIANT' " Variant to use with
" report
PRIPARAMS = USER_PRINT_PARAMS " User printing options
ARCPARAMS = USER_ARC_PARAMS " User archiving options
" Both sets of options
" come from
" GET_PRINT_PARAMETERS
EXCEPTIONS
BAD_PRIPARAMS = 01
INVALID_JOBDATA = 02
JOBNAME_MISSING = 03
JOB_NOTEX = 04
JOB_SUBMIT_FAILED = 05
LOCK_FAILED = 06
PROGRAM_MISSING = 07
PROG_ABAP_AND_EXTPG_SET = 08
OTHERS = 99.
step 3
Sample Program: Immediate Start with JOB_CLOSE
explanation :
Use JOB_CLOSE to pass a background job to the background processing system to be run. Once you have "closed" a job, you can no longer add job steps to it or change job/job step specifications.
The function module returns an indicator as to whether the job was automatically released or not. A job is automatically released to run only if the user who scheduled the job has RELE release authorization for the authorization object Operations on background jobs.
A job step is an independent unit of work in a job, the execution of an ABAP or external program. Each job step can have its own authorizations user and printer/optical archiving specifications.
Submit job for processing: immediate start
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
JOBCOUNT = JOBNUMBER " Job identification: number
JOBNAME = JOBNAME " and name.
STRTIMMED = 'X' " Schedules the job for
" immediate start. The job
" is started immediately
" only if the user has the
" RELE authorization to
" release a job to run.
IMPORTING
JOB_WAS_RELEASED = JOB_RELEASED " If user has authorization
" to release jobs to run, job
" is automatically released
" when it is scheduled. This
" field is set to 'x' if the
" job has been released.
" Otherwise, the job is sche-
" duled but must be released
" by an administrator before
" it can be started.
EXCEPTIONS
CANT_START_IMMEDIATE No longer used. Replaced by IMPORTING
parameter JOB_WAS_RELEASED.
INVALID_STARTDATE = 01
JOBNAME_MISSING = 02
JOB_CLOSE_FAILED = 03
JOB_NOSTEPS = 04
JOB_NOTEX = 05
LOCK_FAILED = 06
OTHERS = 99.
IF SY-SUBRC > 0.
<Error processing>
ENDIF.
in step 1 we will create a job with name etc..
in step 2 we will assign work to this job
step 3 : we will close the job inorder make it scheduled .
Regards
srikanth
added descriptions to each steps

Function Module to print

Hi all,
Anyone knows a function module that could perform print function?
Thanks all.

You can also view the following code :
Normal definition of the print parameters
DATA: PARAMS LIKE PRI_PARAMS,
 VALID TYPE C.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING DESTINATION = 'LT50'
IMPORTING OUT_PARAMETERS = PARAMS
 VALID = VALID.
IF VALID <> SPACE.
NEW-PAGE PRINT ON PARAMETERS PARAMS.
ENDIF.
Definition of the parameters for printing and archiving
DATA: PRI_PARAMS LIKE PRI_PARAMS,
 ARC_PARAMS LIKE ARC_PARAMS,
 VALID TYPE C.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
IMPORTING OUT_PARAMETERS = PRI_PARAMS
 OUT_ARCHIVE_PARAMETERS = ARC_PARAMS
 VALID = VALID.
IF VALID <> SPACE.
NEW-PAGE PRINT ON PARAMETERS PRI_PARAMS
 ARCHIVE PARAMETERS ARC_PARAMS.
ENDIF.
Definition of the parameters for a background job
DATA: PARAMS LIKE PRI_PARAMS,
 VALID TYPE C.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING MODE = 'BATCH'
 REPORT = 'MYREPORT'
IMPORTING OUT_PARAMETERS = PARAMS
 VALID = VALID.
IF VALID <> SPACE.
CALL FUNCTION 'JOB_OPEN' .... EXPORTING JOBCOUNT ...
SUBMIT MYREPORT VIA JOB 'MY_JOB' NUMBER JOBCOUNT
 TO SAP-SPOOL WITHOUT SPOOL DYNPRO
 SPOOL PARAMTERS PARAMS.
CALL FUNCTION 'JOB_CLOSE' ...
ENDIF.
Modifying the print parameters
CALL FUNCTION 'GET_PRINT_PARAMETERS' "Obtain print
EXPORTING NO_DIALOG = 'X' "parameters
IMPORTING OUT_PARAMETERS = PARAMS.
CALL FUNCTION 'GET_PRINT_PARAMETERS' "Modify print
EXPORTING NO_DIALOG = 'X' "parameters
 IN_PARAMETERS = PARAMS
 LIST_NAME = 'NEW-LIST'
IMPORTING OUT_PARAMETERS = PARAMS.

URGENT: Function modules or BAPIs

Hi Experts,
I need function modules or BAPI to get the open items and cleared items G/L Account wise.
Useful replies will be surely awarded.

Hi Chakradhar,
Check tcode : BAPI
u will get all bapis there.
Regards,
Hemant

How to attached class or function module in FD03

Hi Guys
I want to attached CL_ATTACHMENT_LIST for retriving attachment list from fd03 please help to attached the function module in my program?
regards
Piroz
report zfir_aged_debtors no standard page heading
 line-size 255.
Type group
type-pools:
slis. " ALV types
Tables
tables:
adrc, " Addresses
bsad, " Accounting: Customer secondary index (Cleared)
bsid, " Accounting: Customer secondary index (Open)
kna1, " Customer master: General data
knkk, " Customer master: Credit management
knvk. " Customer master: Contact persons
Types
types:
begin of ty_bsadbsid,
 bukrs like bsad-bukrs, " Company code
 kunnr like bsad-kunnr, " Customer
 gjahr like bsad-gjahr, " Fiscal year
 belnr like bsad-belnr, " Accounting document number
 buzei like bsad-buzei, " Line item
 budat like bsad-budat, " Posting date
 bldat like bsad-bldat, " Document date
 waers like bsad-waers, " Currency
 xblnr like bsad-xblnr, " Reference
 shkzg like bsad-shkzg, " Debit/credit indicator
 dmbtr like bsad-dmbtr, " Amount
 zfbdt like bsad-zfbdt, " Baseline date for due date
 " calculation
 zbd1t like bsad-zbd1t, " Cash discount days 1
 zbd2t like bsad-zbd2t, " Cash discount days 2
 zbd3t like bsad-zbd3t, " Net payment terms period
 rebzg like bsad-rebzg, " Number of the invoice
 rebzt like bsad-rebzt, " Follow on document type
end of ty_bsadbsid,
ty_it_bsadbsid type ty_bsadbsid occurs 0,
begin of ty_merged,
 kunnr like kna1-kunnr, " Customer number
 name1 like adrc-name1, " Name
 city1 like adrc-city1, " City
 post_code1 like adrc-post_code1, " Post code
 street like adrc-street, " Street
 house_num1 like adrc-house_num1, " House number
 tel_number like adrc-tel_number, " Telephone number
 fax_number like adrc-fax_number, " Fax number
 namev like knvk-namev, " First name
 namew like knvk-name1, " Last name
 telf1 like knvk-telf1, " Telephone number
 klimk like knkk-klimk, " Credit limit
 skfor like knkk-skfor, " Total receivables
 total like bsad-dmbtr, " Total amount
 rast1 like bsad-dmbtr, " Amount period 1
 rast2 like bsad-dmbtr, " Amount period 2
 rast3 like bsad-dmbtr, " Amount period 3
 rast4 like bsad-dmbtr, " Amount period 4
 rast5 like bsad-dmbtr, " Amount period 5
 rast6 like bsad-dmbtr, " Amount period 6
end of ty_merged,
ty_it_merged type ty_merged occurs 0.
Internal tables
data:
Internal table to store customer line items from BSAD and BSID
it_bsadbsid type ty_it_bsadbsid,
Internal table to store field catalog for ALV function call
it_fieldcat type slis_t_fieldcat_alv,
Internal table to store summarised data for report output
it_merged type ty_it_merged.
Structures
data:
Display variant structures
st_tvariant like disvariant,
st_variant like disvariant.
Constants
constants:
co_delim_dash type c
 value '-',
co_false type c " False
 value space,
co_koart_d like faede-koart " Customer account type
 value 'D',
co_save_u type c " User display variant
 value 'U', " saving allowed.
co_shkzg_h like bsid-shkzg " Debit/Credit indicator
 value 'H', " for credit
co_shkzg_s like bsid-shkzg " Debit/Credit indicator
 value 'S', " for debit
co_selected type c " Value of selected radio
 value 'X', " button or checkbox
co_true type c " True
 value co_selected.
Variables
data:
va_exit type c.
Selection screen definition
selection-screen: begin of block b1 with frame title text-001.
select-options:
s_kunnr for bsad-kunnr. " Customer number
parameters:
p_kkber like knkk-kkber, " Credit control area
p_pafkt like knvk-pafkt, " Contact function
p_datum like sy-datum. " Report date
selection-screen: begin of line,
 comment 01(30) text-006,
 position pos_low.
parameters:
rastbis1 like rfpdo1-allgrogr " Due date sorted 1
 default '000',
rastbis2 like rfpdo1-allgrogr " Due date sorted 2
 default '000',
rastbis3 like rfpdo1-allgrogr " Due date sorted 3
 default '000',
rastbis4 like rfpdo1-allgrogr " Due date sorted 4
 default '000',
rastbis5 like rfpdo1-allgrogr " Due date sorted 5
 default '000'.
selection-screen: end of line.
selection-screen: end of block b1,
 begin of block b2 with frame title text-002.
parameters:
p_varint like disvariant-variant. " Display variant.
selection-screen: end of block b2.
Initialisation
initialization.
Provide default periods for due date sorted list.
rastbis1 = 0.
rastbis2 = 30.
rastbis3 = 60.
rastbis4 = 90.
rastbis5 = 120.
Default report date to current.
p_datum = sy-datlo.
Default credit control area to BP01.
p_kkber = 'BP01'.
At selection screen on value request for
at selection-screen on value-request for p_varint.
Provide display variant list for this program.
call function 'REUSE_ALV_VARIANT_F4'
 exporting
 is_variant = st_variant
 i_save = co_save_u
 importing
 e_exit = va_exit
 es_variant = st_tvariant
 exceptions
 not_found = 2.
if sy-subrc eq 2.
 message id sy-msgid type 'S'
 number sy-msgno
 with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
else.
 if va_exit eq space.
 st_variant = st_tvariant.
 p_varint = st_tvariant-variant.
 endif.
endif.
At selection screen
at selection-screen.
Load display variant.
if not p_varint is initial.
 move st_variant to st_tvariant.
 move p_varint to st_tvariant-variant.
 call function 'REUSE_ALV_VARIANT_EXISTENCE'
 exporting
 i_save = co_save_u
 changing
 cs_variant = st_tvariant.
 st_variant = st_tvariant.
else.
 clear st_variant.
 st_variant-report = sy-repid.
endif.
if p_kkber is initial.
Ensure credit control area is specified.
 message e000(zgen) with 'Credit control area must be specified'.
endif.
if p_pafkt is initial.
Ensure contact person function is specified.
 message e000(zgen) with 'Contact person function must be specified'.
endif.
Start of selection
start-of-selection.
Extract open customer items from BSID
select bukrs kunnr gjahr belnr buzei budat bldat waers xblnr shkzg
 dmbtr zfbdt zbd1t zbd2t zbd3t rebzg rebzt
 from bsid
 into table it_bsadbsid
 where kunnr in s_kunnr
 and budat le p_datum.
Extracct cleared customer items from BSAD
select bukrs kunnr gjahr belnr buzei budat bldat waers xblnr shkzg
 dmbtr zfbdt zbd1t zbd2t zbd3t rebzg rebzt
 from bsad
 appending table it_bsadbsid
 where kunnr in s_kunnr
 and budat le p_datum
 and augdt ge p_datum.
Ensure that items were not selected twice while getting data from the
open and cleared items tables (Only if transaction occured during
report run).
sort it_bsadbsid by bukrs belnr gjahr buzei.
delete adjacent duplicates from it_bsadbsid
 comparing bukrs belnr gjahr buzei.
if it_bsadbsid[] is initial.
No data found for selection
 message s001(zgen).
 exit.
endif.
Merge data for report output
perform merge_data tables it_bsadbsid
 it_merged.
Build field catalog
perform build_field_catalog tables it_fieldcat.
Output report via ALV
perform output_report_via_alv tables it_fieldcat
 it_merged.
*& Form merge_data
 text
form merge_data tables pa_it_bsadbsid type ty_it_bsadbsid
 pa_it_merged type ty_it_merged.
Local work areas
data:
lwa_bsadbsid type ty_bsadbsid,
lwa_merged type ty_merged.
Local structures
data:
lst_faede like faede.
Local variables
data:
lva_daysover type i,
lva_merged_tabix like sy-tabix.
loop at pa_it_bsadbsid into lwa_bsadbsid.
Lookup merged entry for customer
 clear lwa_merged.
 read table pa_it_merged into lwa_merged
 with key kunnr = lwa_bsadbsid-kunnr
 binary search.
 lva_merged_tabix = sy-tabix.
 if sy-subrc ne 0.
 Create new merged record for customer
 lwa_merged-kunnr = lwa_bsadbsid-kunnr.
 Get customer details from KNA1
 clear kna1.
 select single *
 from kna1
 where kunnr eq lwa_bsadbsid-kunnr.
 Get customer address details from ADRC
 clear adrc.
 select single *
 from adrc
 where addrnumber eq kna1-adrnr
 and date_from le p_datum.
 lwa_merged-name1 = adrc-name1.
 lwa_merged-city1 = adrc-city1.
 lwa_merged-post_code1 = adrc-post_code1.
 lwa_merged-street = adrc-street.
 lwa_merged-house_num1 = adrc-house_num1.
 lwa_merged-tel_number = adrc-tel_number.
 lwa_merged-fax_number = adrc-fax_number.
 Get credit limit details from KNKK
 clear knkk.
 select single *
 from knkk
 where kunnr eq lwa_bsadbsid-kunnr
 and kkber eq p_kkber.
 lwa_merged-klimk = knkk-klimk.
 lwa_merged-skfor = knkk-skfor.
 Get customer contact person details from KNVK
 clear knvk.
 select single *
 from knvk
 where kunnr eq lwa_bsadbsid-kunnr
 and pafkt eq p_pafkt.
 lwa_merged-namev = knvk-namev.
 lwa_merged-namew = knvk-name1.
 lwa_merged-telf1 = knvk-telf1.
 insert lwa_merged into pa_it_merged index lva_merged_tabix.
 endif.
Interpret debit/credit indicator
 case lwa_bsadbsid-shkzg.
 when co_shkzg_h.
 Credit
 lwa_bsadbsid-dmbtr = 0 - lwa_bsadbsid-dmbtr.
 when co_shkzg_s.
 Debit
 endcase.
Perform ageing
 clear lst_faede.
 move-corresponding lwa_bsadbsid to lst_faede.
 lst_faede-koart = co_koart_d.
 call function 'DETERMINE_DUE_DATE'
 exporting
 i_faede = lst_faede
 importing
 e_faede = lst_faede
 exceptions
 others = 1.
 lva_daysover = p_datum - lst_faede-netdt.
Accumulate total.
 add lwa_bsadbsid-dmbtr to lwa_merged-total.
 if lva_daysover le rastbis1.
 add lwa_bsadbsid-dmbtr to lwa_merged-rast1.
 else.
 if lva_daysover le rastbis2 or
 rastbis3 is initial.
 add lwa_bsadbsid-dmbtr to lwa_merged-rast2.
 else.
 if lva_daysover le rastbis3 or
 rastbis4 is initial.
 add lwa_bsadbsid-dmbtr to lwa_merged-rast3.
 else.
 if lva_daysover le rastbis4 or
 rastbis5 is initial.
 add lwa_bsadbsid-dmbtr to lwa_merged-rast4.
 else.
 if lva_daysover le rastbis5.
 add lwa_bsadbsid-dmbtr to lwa_merged-rast5.
 else.
 add lwa_bsadbsid-dmbtr to lwa_merged-rast6.
 endif.
 endif.
 endif.
 endif.
 endif.
Update the merged record
 modify pa_it_merged from lwa_merged index lva_merged_tabix.
endloop.
endform. " merge_data
*& Form build_field_catalog
 text
form build_field_catalog tables pa_it_fieldcat type slis_t_fieldcat_alv.
Local work areas
data:
 lwa_fieldcat type slis_fieldcat_alv.
--WG1K903216: Start Insert-
data: v_datum type datum,
 v_mdmth type datum,
 v_datxt type string,
 v_noday type i.
--WG1K903216: End Insert---
refresh pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'KUNNR'.
lwa_fieldcat-ref_tabname = 'KNA1'.
lwa_fieldcat-ref_fieldname = 'KUNNR'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '1'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'NAME1'.
lwa_fieldcat-ref_tabname = 'ADRC'.
lwa_fieldcat-ref_fieldname = 'NAME1'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '2'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'CITY1'.
lwa_fieldcat-ref_tabname = 'ADRC'.
lwa_fieldcat-ref_fieldname = 'CITY1'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '3'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'POST_CODE1'.
lwa_fieldcat-ref_tabname = 'ADRC'.
lwa_fieldcat-ref_fieldname = 'POST_CODE1'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '4'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'STREET'.
lwa_fieldcat-ref_tabname = 'ADRC'.
lwa_fieldcat-ref_fieldname = 'STREET'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '5'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'HOUSE_NUM1'.
lwa_fieldcat-ref_tabname = 'ADRC'.
lwa_fieldcat-ref_fieldname = 'HOUSE_NUM1'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '6'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'TEL_NUMBER'.
lwa_fieldcat-ref_tabname = 'ADRC'.
lwa_fieldcat-ref_fieldname = 'TEL_NUMBER'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '7'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'FAX_NUMBER'.
lwa_fieldcat-ref_tabname = 'ADRC'.
lwa_fieldcat-ref_fieldname = 'FAX_NUMBER'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '8'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'NAMEV'.
lwa_fieldcat-ref_tabname = 'KNVK'.
lwa_fieldcat-ref_fieldname = 'NAMEV'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '9'.
lwa_fieldcat-seltext_l = 'Contact first name'.
lwa_fieldcat-seltext_m = 'Contact Fname'.
lwa_fieldcat-seltext_s = 'Ctct Fname'.
lwa_fieldcat-ddictxt = 'L'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'NAMEW'.
lwa_fieldcat-ref_tabname = 'KNVK'.
lwa_fieldcat-ref_fieldname = 'NAME1'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '10'.
lwa_fieldcat-seltext_l = 'Contact last name'.
lwa_fieldcat-seltext_m = 'Contact Lname'.
lwa_fieldcat-seltext_s = 'Ctxt Lname'.
lwa_fieldcat-ddictxt = 'L'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'TELF1'.
lwa_fieldcat-ref_tabname = 'KNVK'.
lwa_fieldcat-ref_fieldname = 'TELF1'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '11'.
lwa_fieldcat-seltext_l = 'Contact phone no.'.
lwa_fieldcat-seltext_m = 'Contact phone'.
lwa_fieldcat-seltext_s = 'Ctct Phne'.
lwa_fieldcat-ddictxt = 'L'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'KLIMK'.
lwa_fieldcat-ref_tabname = 'KNKK'.
lwa_fieldcat-ref_fieldname = 'KLIMK'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '12'.
lwa_fieldcat-seltext_l = 'Credit limit'.
lwa_fieldcat-seltext_m = 'Credit limit'.
lwa_fieldcat-seltext_s = 'Crdt limit'.
lwa_fieldcat-ddictxt = 'L'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'SKFOR'.
lwa_fieldcat-ref_tabname = 'KNKK'.
lwa_fieldcat-ref_fieldname = 'SKFOR'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '13'.
lwa_fieldcat-seltext_l = 'Credit used'.
lwa_fieldcat-seltext_m = 'Credit used'.
lwa_fieldcat-seltext_s = 'Crdt used'.
lwa_fieldcat-ddictxt = 'L'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'TOTAL'.
lwa_fieldcat-ref_tabname = 'BSAD'.
lwa_fieldcat-ref_fieldname = 'DMBTR'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '14'.
lwa_fieldcat-seltext_l = 'Total'.
lwa_fieldcat-seltext_m = 'Total'.
lwa_fieldcat-seltext_s = 'Total'.
lwa_fieldcat-ddictxt = 'L'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'RAST1'.
lwa_fieldcat-ref_tabname = 'BSAD'.
lwa_fieldcat-ref_fieldname = 'DMBTR'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '15'.
--WG1K903216: Start Delete-
concatenate '<'
 rastbis2
 into lwa_fieldcat-seltext_l
 separated by space.
--WG1K903216: End Delete---
--WG1K903216: Start Insert-
clear: v_datum,
 v_datxt.
v_noday = rastbis2.
Always use the middle of the report month as a heading reference date.
concatenate p_datum+0(6) '15' into v_mdmth.
call function 'ZWAG_DATE_CALCULATOR'
 exporting i_datum = v_mdmth
 i_noday = v_noday
 i_oprnd = '+'
 importing e_datum = v_datum
 exceptions invalid_operand = 1.
call function 'ZWAG_END_MONTH'
 exporting i_datum = v_datum
 importing e_datum = v_datum
 e_datxt = v_datxt
 exceptions invalid_date = 1.
concatenate 'Due' v_datxt into lwa_fieldcat-seltext_l
 separated by space.
--WG1K903216: End Insert---
lwa_fieldcat-seltext_m = lwa_fieldcat-seltext_l.
lwa_fieldcat-seltext_s = lwa_fieldcat-seltext_l.
lwa_fieldcat-ddictxt = 'L'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'RAST2'.
lwa_fieldcat-ref_tabname = 'BSAD'.
lwa_fieldcat-ref_fieldname = 'DMBTR'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '16'.
--WG1K903216: Start Delete-
concatenate rastbis1
 rastbis2
 into lwa_fieldcat-seltext_l
 separated by co_delim_dash.
--WG1K903216: End Delete---
--WG1K903216: Start Insert-
clear: v_datum,
 v_datxt.
v_noday = rastbis1.
call function 'ZWAG_DATE_CALCULATOR'
 exporting i_datum = v_mdmth
 i_noday = v_noday
 i_oprnd = '+'
 importing e_datum = v_datum
 exceptions invalid_operand = 1.
call function 'ZWAG_END_MONTH'
 exporting i_datum = v_datum
 importing e_datum = v_datum
 e_datxt = v_datxt
 exceptions invalid_date = 1.
concatenate 'Due' v_datxt into lwa_fieldcat-seltext_l
 separated by space.
--WG1K903216: End Insert---
lwa_fieldcat-seltext_m = lwa_fieldcat-seltext_l.
lwa_fieldcat-seltext_s = lwa_fieldcat-seltext_l.
lwa_fieldcat-ddictxt = 'L'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'RAST3'.
lwa_fieldcat-ref_tabname = 'BSAD'.
lwa_fieldcat-ref_fieldname = 'DMBTR'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '17'.
--WG1K903216: Start Delete-
concatenate rastbis2
 rastbis3
 into lwa_fieldcat-seltext_l
 separated by co_delim_dash.
--WG1K903216: End Delete---
--WG1K903216: Start Insert-
clear: v_datum,
 v_datxt.
v_noday = rastbis2.
call function 'ZWAG_DATE_CALCULATOR'
 exporting i_datum = v_mdmth
 i_noday = v_noday
 i_oprnd = '-'
 importing e_datum = v_datum
 exceptions invalid_operand = 1.
call function 'ZWAG_END_MONTH'
 exporting i_datum = v_datum
 importing e_datum = v_datum
 e_datxt = v_datxt
 exceptions invalid_date = 1.
concatenate 'Due' v_datxt into lwa_fieldcat-seltext_l
 separated by space.
--WG1K903216: End Insert---
lwa_fieldcat-seltext_m = lwa_fieldcat-seltext_l.
lwa_fieldcat-seltext_s = lwa_fieldcat-seltext_l.
lwa_fieldcat-ddictxt = 'L'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'RAST4'.
lwa_fieldcat-ref_tabname = 'BSAD'.
lwa_fieldcat-ref_fieldname = 'DMBTR'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '18'.
--WG1K903216: Start Delete-
concatenate rastbis3
 rastbis4
 into lwa_fieldcat-seltext_l
 separated by co_delim_dash.
--WG1K903216: End Delete---
--WG1K903216: Start Insert-
clear: v_datum,
 v_datxt.
v_noday = rastbis3.
call function 'ZWAG_DATE_CALCULATOR'
 exporting i_datum = v_mdmth
 i_noday = v_noday
 i_oprnd = '-'
 importing e_datum = v_datum
 exceptions invalid_operand = 1.
call function 'ZWAG_END_MONTH'
 exporting i_datum = v_datum
 importing e_datum = v_datum
 e_datxt = v_datxt
 exceptions invalid_date = 1.
concatenate 'Due' v_datxt into lwa_fieldcat-seltext_l
 separated by space.
--WG1K903216: End Insert---
lwa_fieldcat-seltext_m = lwa_fieldcat-seltext_l.
lwa_fieldcat-seltext_s = lwa_fieldcat-seltext_l.
lwa_fieldcat-ddictxt = 'L'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'RAST5'.
lwa_fieldcat-ref_tabname = 'BSAD'.
lwa_fieldcat-ref_fieldname = 'DMBTR'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '19'.
--WG1K903216: Start Delete-
concatenate rastbis4
 rastbis5
 into lwa_fieldcat-seltext_l
 separated by co_delim_dash.
--WG1K903216: End Delete---
--WG1K903216: Start Insert-
clear: v_datum,
 v_datxt.
v_noday = rastbis4.
call function 'ZWAG_DATE_CALCULATOR'
 exporting i_datum = v_mdmth
 i_noday = v_noday
 i_oprnd = '-'
 importing e_datum = v_datum
 exceptions invalid_operand = 1.
call function 'ZWAG_END_MONTH'
 exporting i_datum = v_datum
 importing e_datum = v_datum
 e_datxt = v_datxt
 exceptions invalid_date = 1.
concatenate 'Due' v_datxt into lwa_fieldcat-seltext_l
 separated by space.
--WG1K903216: End Insert---
lwa_fieldcat-seltext_m = lwa_fieldcat-seltext_l.
lwa_fieldcat-seltext_s = lwa_fieldcat-seltext_l.
lwa_fieldcat-ddictxt = 'L'.
append lwa_fieldcat to pa_it_fieldcat.
clear lwa_fieldcat.
lwa_fieldcat-tabname = 'PA_IT_MERGED'.
lwa_fieldcat-fieldname = 'RAST6'.
lwa_fieldcat-ref_tabname = 'BSAD'.
lwa_fieldcat-ref_fieldname = 'DMBTR'.
lwa_fieldcat-row_pos = '1'.
lwa_fieldcat-col_pos = '20'.
--WG1K903216: Start Delete-
concatenate '>'
 rastbis5
 into lwa_fieldcat-seltext_l
 separated by space.
--WG1K903216: End Delete---
--WG1K903216: Start Insert-
clear: v_datum,
 v_datxt.
v_noday = rastbis5.
call function 'ZWAG_DATE_CALCULATOR'
 exporting i_datum = v_mdmth
 i_noday = v_noday
 i_oprnd = '-'
 importing e_datum = v_datum
 exceptions invalid_operand = 1.
call function 'ZWAG_END_MONTH'
 exporting i_datum = v_datum
 importing e_datum = v_datum
 e_datxt = v_datxt
 exceptions invalid_date = 1.
concatenate 'Due By' v_datxt into lwa_fieldcat-seltext_l
 separated by space.
--WG1K903216: End Insert---
lwa_fieldcat-seltext_m = lwa_fieldcat-seltext_l.
lwa_fieldcat-seltext_s = lwa_fieldcat-seltext_l.
lwa_fieldcat-ddictxt = 'L'.
append lwa_fieldcat to pa_it_fieldcat.
endform. " build_field_catalog
*& Form output_report_via_alv
 text
form output_report_via_alv
 tables pa_it_fieldcat type slis_t_fieldcat_alv
 pa_it_merged type ty_it_merged.
Local variables
data:
 lva_repid like sy-repid,
 lva_formname type slis_formname.
lva_repid = sy-repid.
lva_formname = 'USER_COMMAND'.
call function 'REUSE_ALV_GRID_DISPLAY'
 exporting
 i_callback_program = lva_repid
 i_callback_user_command = lva_formname
 i_save = 'A'
 is_variant = st_variant
 it_fieldcat = pa_it_fieldcat[]
 tables
 t_outtab = pa_it_merged
 exceptions
 program_error = 1
 others = 2.
endform. " output_report_via_alv

Hi shiva
Thanks for your help,
Can you check this coding and revert me back ASAP Please.
REPORT BDS_GOS_CONNECTION.
DATA : logical_system LIKE BAPIBDS01-log_system.
 CLASSNAME LIKE BAPIBDS01-CLASSNAME
 OBJKEY LIKE SWOTOBJID-objkey.
PARAMETERS: pa_lo_sys BAPIBDS01-log_system,
 pa_class like BPIBDS01-CLASSNAME,
 pa_objkey like swotobjidobjkey.
AT SELECTION-SCREEN.
CALL FUNCTION 'BDS_GOS_CONNECTIONS_GET'
 EXPORTING
 bor_id = bor_id
 IMPORTING
 logical_sytem = pa_lo_sys.
 classname = pa_class.
 objkey = pa_objkey.
 EXCEPTIONS
 no_objects_found = 1
 internal_error = 2
 internal_gos_error = 3.
 IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
 ENDIF.
clear v_attno1.
i_object1-typeid = 'BUS2012'.
i_object1-catid = 'BO'.
i_object1-instid = i_yItem-docno.
call method cl_gos_attachment_query=>count_for_object
 exporting
 is_object = i_object1
 ip_arl = space
 receiving
 rt_stat = i_stat1.
read table i_stat1 into wa_stat1 index 1.
if sy-subrc eq c_0.
 move wa_stat1-counter to v_attno1.
endif.
CALL METHOD cl_gos_attachment_query=>count_for_object
EXPORTING
is_object = object
ip_arl = space
RECEIVING
rt_stat = lt_stat.
READ TABLE lt_stat INDEX 1 into ls_stat.
count = ls_stat-counter.
*The object has to be a concatenation of your document, like this:
CONCATENATE object-instid tab-gjahr INTO object-instid.
ELSE.
CONCATENATE tab-bukrs tab-belnr tab-gjahr INTO
object-instid.
ENDIF.

Call RFC Function Module and return 1000 records at a time

I would like to call a Remote Enabled Function Module from a non SAP system. This function module will select data from the database and return it to the calling program.
Suppose there are 100,000 records that need to be returned, but the calling module would like the data in chunks of 1000 records. Therefore the calling program would call the FM 100 times.
How do I code the function module to know on each subsequent call to grab the next chunk of 1000 records?
Let me know if additional information is needed.
Thanks,
Aaron

Hello,
Here is how you can go for this issue:
1. Create one RFC function module with following parameter. These parameters are with respective of chunking logic.
     Import: Package Size
     Export: Total number of records
     Changing: chunk count
Implement following logic:
1. First of you need to know how many chunks you need to fetch for that get the count of total number of records. This is one
    time activity so you better maintain one flag import parameter will be set to 'X' only first call.
2. Get the number of chunk using total number of records / chunk size for e.g. 1000 / 100 so chunk count = 10.
3. Define internal chunk counter in function module which will be used to locate the correct chunk depending on the chunk
    counter value sent from calling program.
4. Send first call with package size 100 and chunk count = 1, execute select statement and increment internal
    chunk count check if chunk count = internal chunk count in current case chunk count = 1 so exit select statement and return
    with first chunk.
5. Send second call with package size 100 and chunk count = 2. Execute select statement and check chunk count with internal
    chunk counter, in current case it will be 1 so skip that data and go for next chunk of 100 records increment internal chunk
    counter. In this case it will match with external chunk count = 2. load output table with that data and return to calling program.
6. Repeat step 4 until you reach last chunk.
You need to use SELECT...ENDSELECT with PACKAGE SIZE addition so for every loop it will return number of records mentioned in package size.
Hope this helps.
Thanks,
Augustin.

Error while passing a table to a function module

Hi Iam passing a table g_tab of length 376 flat structure to the function module..under TABLES section parameter.
Changedocument_read_headers.
iam getting a complile time error like the below displayed thing. Can u tell me how to solve this ?
In the function module interface, you can specify only
fields of a specific type and length under "I_CDHDR".
Although the currently specified field
"G_CDHDR_TAB" is the correct type, its length is incorrect.
Edited by: kiran kumar on Jul 7, 2008 8:53 AM

probably u making a mistake while declaring the table
declare it like this in the tables section:
S_JOB LIKE RNGE_OBJID
where s_job is the internal table name and RANGE_OBJID is a structure type and NOT an internal table type.

RFC Error While Invoking A Remote Function Module.

I am invoking A remote function module while invoking it get an exception when i see the error logs
com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: Screen output without connection to user. , error key: RFC_ERROR_SYSTEM_FAILURE at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:101) at... [see details]
can anyone pls tell me what the error is..
regards
Nilesh Taunk.

Hi Nilesh Taunk,
You can go through the following steps
-o JCO Exceptions 1. http://help.sap.com/saphelp_nw04s/helpdata/en/f6/daea401675752ae10000000a155106/frameset.htm
-o JCO Exceptions 2. http://help.sap.com/saphelp_nw04/helpdata/en/f6/e002416225f023e10000000a155106/frameset.htm
-o Restart of the J2EE instance and try re-importing the RFC model. Sometimes it helps.
-o Logon into WebDynpro Content Administrator as a J2EE Admin and check if the JCO Connections and User /pwd of your application is correct. You can ping or test your JCO connections. if something is wrong, enter the values again for JCO n retest them.
-o Try undeploying or removing the complete application and redeploy it.
Tu undeploy please go to
Go to Visual Admin -> Server -> Services -> Deploy ->

Under Runtime Tab
select the server, open the tree , you would find the webdypro list there.
Now select an application, first stop it, remove it and redeploy if necessary.
Let us know if you could solve the problem or not, gud luck!
Rgds,
Sreenivas.

Error while generating Web Service from a function module.

Hi Experts,
I am trying to create a web service from function module by doing the steps as mentioned in the below document:
http://www.sdn.sap.com/irj/scn/index;jsessionid=(J2EE3417800)ID1146834250DB10778842957931285337End?rid=/library/uuid/80fa3dff-ce76-2a10-3f94-f3df8f2db5a2&overridelayout=true
When i save it as an local object instead of generating the Web Service it gives me the below error:
"Error during activation of Web Service"
Kindly let me know what needs to be done inorder to resolve this issue.
I have a feeling that this error may be with respect to some authorizations, in that case how do we resolve it
Helpful Inputs Awaited.!!!
Thanks
Dhwani

Hi Dhawani,
Hi Pavan,
Can you please elaborate...how this will help??
Thanks
Dhwani
I dont know the specific reason but internally there may some inconsistancy but i faced the same error and i tried with saving it in the package.
Thanks

CNTL_ERROR while calling a function module from Java webdynpro

I am calling a RFC function module from javawebdynpro app
which inturn calls a function module performing BDC on CAPP transaction. When I run this from SE37 of the same system or a different system everything works fine. But when called from Java webdynpro app, it raises a CNTL_ERROR exception and creates a short dump.
Any help on this is highly appreciated

Good catch, BI Learner. This was exactly it: when assigning the values from SOURCEFIELDS directly to the import/export parameters, you have to make sure that the types are EXACTLY the same, otherwise it will not work (the routine stops with an error when calling the FM, but there is no dump).
Therefore, to solve my problem, I created the declarations precisely as expected by the FM and assigned the values to these fields:
DATA:
      SOURCEVAL TYPE /BIC/OIINVQTY,
      SOURCEUOM TYPE /BIC/OIUSUOM,
      USITM TYPE /BIC/OIUSITM,
      TARGETUOM TYPE /BIC/OIUSUOM,
      CONVERTED_COST TYPE /BIC/OIINVQTY.
DATA PRODUCTION_UOM TYPE /BIC/OIUSUOM.
" get the Production UOM
    SELECT SINGLE I~/BIC/USPRDUOM
      FROM /BIC/PUSITM AS I
      INTO PRODUCTION_UOM
      WHERE I~/BIC/USITM = SOURCE_FIELDS-/BIC/USITM AND I~OBJVERS = 'A'.
    IF ( SY-SUBRC = 4 ). " no records found
      "RAISE PARTNO_NOT_FOUND.
      RAISE EXCEPTION TYPE CX_RSROUT_SKIP_RECORD.
    ENDIF.
" load the parameters
    SOURCEVAL = SOURCE_FIELDS-/BIC/USFRZMFC.
    SOURCEUOM = SOURCE_FIELDS-BASE_UOM.
    USITM = SOURCE_FIELDS-/BIC/USITM.
" then you can call the FM
    CALL FUNCTION 'Z_CA_CONVERT_US_COST'
      EXPORTING
        PSOURCEVAL                = SOURCEVAL
        PSOURCEUOM                = SOURCEUOM
        PUSITM                    = USITM
        PTARGETUOM                = PRODUCTION_UOM
      IMPORTING
        PTARGETVAL                = CONVERTED_COST
      EXCEPTIONS
        CONVERSION_NOT_MAINTAINED = 1
        PARTNO_NOT_FOUND          = 2
        OTHERS                    = 3.
" ... [do the rest]
Thanks for your help,
Dennis

JOB_CLOSE function module

Similar Messages

Maybe you are looking for