Job control

Hello gurus.
We need to deactivate the job control in R/3 prod. We are enhancing some cubes in BW. Last week we went to lbwe and clicked on jobcontol to stop the job. After deleting the dates, we just came back...but today when i checked the job started and ended...How to stop the job permanently. The program name is
RMBWV302
RMBWV311
RMBWV312
RMBWV313
REgards
Rak

hi,
You can to find out your job in SM37, in BW goto Monitor screen and copy the Job Name (from Header tab) and goto SM37 and give the job name and if you know the user give or else give * and set timings and execte, now you can get your job.In R/3 also you can see the same thing, but in R/3 in SM37 you need to give job name is *<job name> but you need to delete job name upto _ (under scoor).
or also you can go to sm50 and click on process and cancel without core
watch this link.
Re: Job detail
Shreya

Similar Messages

Error when scheduling job for Job Control LO

Hi all,
I tried to schedule the job for collective update after I set the job parameter in tcode LBWE for LO Data Extraction. But they said 'Error generating job' without any description why.
Maybe you can help me about this since I still can't do the delta extraction for LO.
Thanks and appreciate for your help.
-Martin Darmawi-

Hi!
You have to pass two parameters for job control scheduling.In that you have traffic light for the respective parameters,defaulty those will appear in red.when you have specified parameters,both turns in to green.then you can say start.hope this will helps.....
Best Regards
Sunil.

Job control in R/3 System

Guys,
I have a question about Job control on LBWE screen. When I click on it. It gives user multiple options. Those options are self explainatory. However, I would like to know for instance if I schedule a job to start at 2:00 PM on November 1st, 2008. The data that is in the setup tables will be sent over to BW system on that date/time?
Thanks,
RG.

Hi Ram,
The jobs that you schedule in LBWE are not for moving data from setup tables. The process works like this. First you load the setup tables and load an INIT into BW. then, an init pointer appears in RSA7. That is Delta queue. On the R/3 side when the documents are posted, they are queued in the extraction queue (LBWQ). The job that you schedule using LBWE moves the data from LBWQ into RSA7. When you load the delta, the data in RSA7 is moved into BW system. Hope it helps.
Thanks and Regards
Subray Hegde

How to make JOB CONTROL setting for delta extraction in Production system .

Hello All,
We are in the process to transport our development to PD server in BI . We have transported the data sources to ECC production and now we are filling the setup table for " SD BILLING BW " . After filling Setup table data in full mode through infoPackage we have to load data in delta mode .
How we can set our Update mode(LBWE setting) in PD server ?
Is LBWE T.Code authorisation required in ECC PD server to make the setting of Update mode or We have to set all Job Control Paramater in Dev System at the time of transport the datasource request to ECC production . Is our time which is set in job control of ECC development will be reflected in ECC production ?
can any body tell me about how to make setting for delta extraction in Production system .
Thanks ...

Hi,
How do you load the data in the development system?
- you set up the update mode in the infopackage. There you must customize "Initialization"
- you have to filled the setup table in the production system without laoding the data in the BW? then this step was for nothing. Filling the setup table and do the INIT in the BW, this must be together - during no changing will be done in your R/3 SD.
Sven

Is Job Control required for Full Dataloads in LO Cockpit

Is Job Control required for Full Dataloads in LO Cockpit
Points will assigned for every useful answer.
regards,
AVNEET

No, Job control is required only for delta records
Why?
When you do full update/Initilization of delta, the system directly goes to the setup tables (note that setup tables are filled from applications tables using statistical setup) and gets the data to the data targets. Normally, you go with this option to get all the historical data which is present in the applications tables.
So, when you peformed init, all the historical data till today are moved to the BW system. Now, how are your delta records( records which are created/modified after your init) moved?
It depends on the update option you have selected in the LO cockpit
if you go with Direct Delta : All the delta records are posted directly to the Delta Queue(RSA7). In this case, Job control is not required.
2. If you go with Queue Delta : All the delta records are first posted to Extraction Queue (LBWQ) and from here records are moved to RSA& using Job Control.
3. If you go with Unserialized V3 update : All the delta records are first posted to Update tables (SM13) from there records are moved to RSA7 using again Job control.
So, all the delta records must be moved to RSA7 from where the bw system picks it delta records.
Thanks
Vj

Job Control Cancelled

My Job Control Runs are Cancelled.
Error Message below:-
Job started                                                        00           516          S
Step 001 started (program RMBWV302, variant , user ID )      00           550          S
Queue processing started (MCEX02, 100, , 0)                       MCEX          153          S
Extraction queue processing started MCEX02 with 6.616 LUWs        MCEX          154          S
ABAP/4 processor: MESSAGE_TYPE_X                                   00           671          A
Job cancelled                                                      00           518          A
Please help.
I have the delta's in SMQ1, RSA7 and LBWQ but I cannot execute the Job Contor Run.

Hi Vikram,
   There's nothing is sm58.
   All I did was create an append structure for 2LIS_02_CGR and used a user exit fill up the append structure.
   When I transported this across to PROD, the job control could NOT run anymore
   The log is as attached below & appreciate a speedy responce.
Short text
    The current application triggered a termination with a short dump.
What happened?
    The current application program detected a situation which really
    should not occur. Therefore, a termination with a short dump was
    triggered on purpose by the key word MESSAGE (type X).
What can you do?
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
Error analysis
    Short text of error message:
    Structures have changed (sy-subrc=2)
    Long text of error message:
    Technical information about the message:
Message class....... "MCEX"
Number.............. 194
Variable 1.......... 2
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
to correct the error
Probably the only way to eliminate the error is to correct the progr
If the error occures in a non-modified SAP program, you may be able
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the followi
keywords:
"MESSAGE_TYPE_X" " "
"SAPLMCEX" or "LMCEXU03"
"MCEX_UPDATE_02"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
    To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
    Display the system log by calling transaction SM21.
    Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
   In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
em environment

Job Control Clover components

Hi,
I was looking through the documentation on Clover's site and noticed there were quite a few components that are not included with OEID 2.3, in particular the Job Control components.
According to the documentation, +"To be able to use this component, your license needs to support the Jobflow."+
Are there any plans in the future to include these set of components? There are components in that set that I see being very beneficial in building graphs.
Thanks,
Chris

Chris,
I think this question is best answered by OEID product management who actively post in this forum. You'll likely get a response from that angle soon.
That said, in my experience with the product, major releases of the OEID product typically look to incorporate the most recent version of the CloverETL product so I assume you'll see CloverETL 3.3 incorporated in one of the next few releases.
I know that doesn't give you much to go on.
Dan
http://branchbird.com

Job control in LBWE

Hi gurus
can any body say the purose of chossing job control in LBWE .. what happens actually if we choose a date in that job control
Thanks in advance
regards
pradeep

Hi......
Check this link :
LOGISTIC COCKPIT DELTA MECHANISM - Episode three: the new update methods
Gist of LO Cockpit Delta
Job Control
Hope these helps you......
Regards,
Debjani......

Lo-cockpet(job control)

hi friends,
i am using lo-cockpet for logistics, i am running deltas using job contro(set time and date) , in case any job control will be fail, i need to get mail, this job control is failed, where can i create mail in job control.
regards
suneel.

hi Suneel,
check
http://help.sap.com/saphelp_nw70/helpdata/en/c4/3a7f87505211d189550000e829fbbd/frameset.htm
5. If spool requests generated by this job are to be sent to someone as email, specify the email address. Choose the Spool list recipient button.
hope this helps.

LO-JOB CONTROL

hi,
What process takes place in jobcontrol at LO COCKPIT.?
URGENT
SRIDEVI

Hi sridevi,
V3 job control , you set the job control in back ground or immediately or after event, etc.
without set the v3 job control data doesn't come to deltaqueue.
V3 updates are serizes v3 update or unserized v3 update or queuedelta or direct delta.
Regards,
Ramesh

LBWE - Job Control drop back to "not maintained"

Hello,
I tried to Schedule Job Control to Hourly for 02 Purchasing. But once i check the job control again, i see it back to not maintained.
Please advise.

Hello Roberto,
Unfortunately, I see the red light "not maintained" additionally if i click on "start date" my previous settings are not there anymore.
How i am settings is:
immediate, then Check Periodic Job, set Periodic Values as Hourly and saving it.
If i open again for the session it is there, but if i relogin same day or next day it's gone.
This is for my all the 9 R/3 systems.
Please Help!

Cancelled Job - Control

Hi,
We are generating a cancelled background job listing for control purpose. Normally we use SM37 to do it. But we need some additional out of it. That is combining the output of sm37 the initial report and the joblog in one report.
Can anybody help me out? Otherwise it is becomming too much manual work for maintaing control complience.
Regards,
Soumen

I feel to go with ABAP. For a small complience requirement I cannot go for an upgradation.
In my mind one of the table from which the base result can come out is TBTCO. I need to know <b>the other table from which the error text is stored</b>.
In fact there is a field in TBTCO named <b>joblog</b> which is temse object name. I guess this may also help.
But can U/anybody help me on that. It is something internal, not very TCODE based what most of the SAP consultaunts are habitual.
Regards,

How to set a different SUSP character? (job control)

Stopping the foreground job associated with a terminal can be done by typing 'C-z', which is the default special character for suspending or resuming it (using the 'SIGSTOP' signal).
Documentation says:
The functions, data structures, and symbolic constants are all declared in the header file 'termios.h'.
and
17.4.1 Terminal Mode Data Type wrote:The entire collection of attributes of a terminal is stored in a structure of type 'struct termios'. This structure is used with the functions 'tcgetattr' and 'tcsetattr' to read and set the attributes. '
I would like to remap that key but I don't know exactly how to store my new character into TERMIOS.c_cc[VSUSP]. I have no programming background. In various Perl modules I found setcflag() calls:
# (source)
# put current values into Termios structure
$self->{TERMIOS}->setcflag($self->{"C_CFLAG"});
Could someone please guide me to a simplified script I can call in .bashrc? is something like this correct?
$termios->tcsetattr( $hotkey | &POSIX::VSUSP );
I also found this in the ActivePython Docs:
termios.tcgetattr(fd)
Return a list containing the tty attributes for file descriptor fd, as follows: [iflag, oflag, cflag, lflag, ispeed, ospeed, cc] where cc is a list of the tty special characters (each a string of length 1, except the items with indices VMIN and VTIME, which are integers when these fields are defined). The interpretation of the flags and the speeds as well as the indexing in the cc array must be done using the symbolic constants defined in the termios module.
termios.tcsetattr(fd, when, attributes)
Set the tty attributes for file descriptor fd from the attributes, which is a list like the one returned by tcgetattr(). The when argument determines when the attributes are changed: TCSANOW to change immediately, TCSADRAIN to change after transmitting all queued output, or TCSAFLUSH to change after transmitting all queued output and discarding all queued input.
POSIX Standard: 7.1-2 General Terminal Interface, Kernel: 3.18.4-1-ARCH
Last edited by sharethewisdom (2015-02-17 11:07:25)

During import, Designer attempts to match fonts in the PDF file with fonts that are available on your computer. If the file contains an unavailable font, Designer displays a dialog box showing the missing font and a suggested replacement. You can accept the replacement font or change it.
This font substitution is not permanent. Designer must map the unavailable fonts every time the form opens. You can make the font substitution permanent by selecting File > Save As and then selecting Permanently Replace Unavailable Fonts before saving the file. This method is recommended for permanently substituting fonts.
You can also set up a font-substitution table in the file ConvertPDF_FontMap.txt in the Designer installation directory. If you add a font-substitution rule to this file, all occurrences of the substituted font are changed to the new font when you import a PDF, regardless of the font-mapping table and regardless of whether the substituted font is available on your computer.
ConvertPDF_FontMap.txt is empty by default. Each entry you add should have the following syntax:
input_font=Designer_font
where input_font is the name of the font used in the input PDF file, and Designer_font is the name of the font that is installed on your computer. Asterisks (*) represent wildcard characters. For example, the string *Cour* refers to all font names that contain the string Cour. Question marks (?) represent single-character wildcards. Adding wildcard characters before and after the input_font name accounts for any slight variations in the name of the font in the form. For example
*Arial*=Arial
*Helv*=Arial
*Cour*=Courier New
*=Times New Roman
Processing occurs in descending order. The last line in the example converts all remaining fonts to Times New Roman.

Bash job control not working

Hey all, recent problem in bash. I do most of my development work in bash with emacs. I was working just fine until a couple weeks ago. Things added since... I tried Visor for a day, hated it and removed it (delete SIMBL plugin). I tried QuickSilver and think it takes a lot of getting used to. No conflicts with QS I can see.
Here is the problem. If I type ^Z to escape a shell process, it succeeds but then immediately throws a warning from bash like this
silversurfer:~ distracted24x7$ emacs .bash_profile
[1]+ Stopped emacs .bash_profile
-bash: warning: deleting stopped job 1 with process group 563
Running "jobs" gets me...
silversurfer:~ distracted24x7$ jobs
[4]+ Running "$cmdfile" 10 &
The PID is still there though...
silversurfer:~ distracted24x7$ ps -ef | grep emacs
501 563 480 0 0:00.02 ttys001 0:00.09 emacs .bash_profile
Running "fg" tells me there are no running jobs. Sure enough, that "cmdfile" thing is gone once I execute a "ps -ef"
I cannot find anything wrong with my system. I upgraded bash to v4.1 and it is still broken. I re-installed iTerm but no success. ZSH is not affected so I have switched to it. Does anyone have any idea what is wrong?
Thank you very much. Be well and have a great day!

Here is my stty output
stty -a
speed 9600 baud; 58 rows; 120 columns;
lflags: icanon isig iexten echo echoe -echok echoke -echonl echoctl
-echoprt -altwerase -noflsh -tostop -flusho pendin -nokerninfo
-extproc
iflags: -istrip icrnl -inlcr -igncr ixon -ixoff ixany imaxbel iutf8
-ignbrk brkint -inpck -ignpar -parmrk
oflags: opost onlcr -oxtabs -onocr -onlret
cflags: cread cs8 -parenb -parodd hupcl -clocal -cstopb -crtscts -dsrflow
-dtrflow -mdmbuf
cchars: discard = ^O; dsusp = ^Y; eof = ^D; eol = <undef>;
eol2 = <undef>; erase = ^?; intr = ^C; kill = ^U; lnext = ^V;
min = 1; quit = ^\; reprint = ^R; start = ^Q; status = ^T;
stop = ^S; susp = ^Z; time = 0; werase = ^W;
I also have an iMac at home and my account has the same problem over there. I logged in as my wife and her account works fine. It is most interesting that my account would be messed up on two separate systems. I suppose you can say it is encouraging that my machine is fine but my profile is not. I also tried my account on my son's macbook and it works fine but then I don't use that machine. So, there is something in my configuration...
I am using the default emacs install and have tried really hard not to update any of the packages that come bundled with OS X. Of course I blew that with the new version of BASH.
Thanks BobHarris and etresoft for helping me through this. I wasn't even thinking about a trying a new account on my system. I have so much to do for so many people... Anyway, the benefit of enlisting others is clearly seen in the help you are giving me.
I am not against rebuilding my machine. I have already done it three times in its life. Of course, I would rather figure out what is wrong but the shortest path is sometimes the best path.

Can't access tty; job control turned off

I have 1 HDD, 2 partitions, both are NTFS, on the first is installed windows 7 X64, and now Im trying to install Arch on the second partition.
Just downloaded the Core install i686, created bootable usb with unetbootin in windows, and when I want to boot from usb stick i get this:
link to the image: http://dl.dropbox.com/u/47497005/IMG_20 … 184733.jpg
Last edited by fsckd (2011-12-13 19:32:52)

Thx djgera, that was causing the problem. Now boots without any problems.
Just in case, do you have any good advices before I begin to install Arch on a HDD that has Windows 7 installed on its first partition?
Oh and I was using unetbootin-windows-563.exe
And I've just checked, the stick boots normally on other laptop also.
Anyway, thank you guys.

Job control

Similar Messages

Maybe you are looking for