Job details and batch monitor

hi ,for a process chain,each process depends on background job,but what is spool  and release in job monitor while seeing display messages for a process chain

Hi kumar,
spool is the output that one can see when job scheduled in background get finished as it is a background job we wont see any output so if we want to see the output of background job we will see spool
job monitor is the place where we can monitor our job wheter it is running fine or not...
regards,
jai

Similar Messages

  • DSP 4 and Batch Monitor crash immediately

    I've used DVD Studio Pro 4 and Batch Monitor on my Mac repeatedly, though it has been about two months since I've last done so. Now, whenever I run either, they crash immediately, with little clue left as to why. (The console simply says "DVD Studio Pro crashed," and that a log was written out. But the log file is incomprehensible to me.)
    I've tried rebooting; even re-installing DSP4, to no avail. I've also tried to remember what I may have installed over the past couple of months to cause this problem and nothing obvious jumps to mind. The only candidates I can even think of are Keyboard Maestro or QuicKeys, though they were only trial editions, and as far as I can tell they're no longer running--and no longer installed--on my machine.
    If anyone has any suggestions, please let me know.
    Thanks.

    There was a problem with a recent Pro Apps update, as I far as I've been able to tell. I found something that helped me fix Compressor with the same problem, but I can't fix DVDSP yet. I'm going to do some more searching and see what I come up with. I'll let you know what I find.

  • Multiple Compressor/Qmaster problems...clusters and batch monitor launch

    Hi All,
    I am continuing to have problems with Compressor and Qmaster. My original problem was that I was trying to create clusters to speed up my workflow. My computer is the only computer in the network. The issue came up when I created a cluster and it would work fine if I dragged in a QT from outside FCP to process in compressor, but if I tried to export a QT from FCP to compressor it would fail. Yesterday as I was about to leave work I was trying to export stuff through compressor and the batch monitor wouldn't launch. Sometimes I could get it to, but the QT it was exporting would disappear once it was processed.
    I've deleted the compressor/FCP prefs and I also tried reinstalling compressor/qmaster. I trashed all the files I was supposed to and it couldn't get rid of all of them because it said they were still in use. AHHH!!!! I'm getting a little frustrated. I called apple and in so many words, they said, "Well, that's what happens with Studio 2. Try reinstalling it."
    Help! I'm on FCP studio 2.

    As mentioned in other threads, virtual clusters are very tricky to setup properly and, unless you're doing a lot of H.264 encoding there's almost no benefit in doing it.
    I highly suggest that you (and anyone struggling with VC's) pick up a copy of "Compressor 3 Quick Reference Guide, Brian Gary" and get a solid understanding of the environment VC's create - and what they're really good for.

  • Issue for Production Report With Production Order Details and Batch Number

    Hi Guys,
    I am looking for a  batch report.I have tried it but i didnt get the desired results.Pls any body give me some solution.
    I need to include the Batch number  in this report and when i have done the same  the values are repeating  and also need to display the Item Description for (Description in Production Order - Parent Item)
    SELECT  distinct t0.docnum,T0.[DocDate], t4.IssuedQty as 'Consumed Qty', T1.[ItemCode] as 'Circle Codee',T1.[Dscription] as 'Circle Name',t3.itemcode
    FROM [dbo].[OIGE]  T0
    INNER JOIN [dbo].[IGE1]  T1 ON T0.DocEntry = T1.DocEntry
    LEFT JOIN owor t3 on t1.baseref = t3.docnum
    left  join wor1 t4 on t3.docentry=t4.docentry
    INNER JOIN OITM T5 ON T1.ItemCode = T5.ItemCode
    INNER JOIN OITB T6 ON T5.ItmsGrpCod = T6.ItmsGrpCod
    INNER JOIN IBT1 T7 ON T5.ItemCode = T7.ItemCode
    INNER JOIN OIBT T8 ON T7.BatchNum = T8.Batchnum and T7.ItemCode = T8.itemcode
    where t0.docdate between  [%0] and [%1] and T6.[ItmsGrpNam] = 'Raw Materials' and t0.JrnlMemo = 'Issue for Production'
    Any body provide me some idea for achieving this....
    Regards,
    Vamsi.

    Hi Bala.
    Thanks for the query but still  not acheived the result.
    The Scenario is to know the quantity of the Coil (Raw MAterial) used IN making a product in different stages and from which batch and Whse the RawMaterial is Consumed in making of the Product(Production Order Parent Item)
    ------------- (Issue for Production )-----------------------|    Production Order Qty(IssuedQty)    Production Order       |  BatchNum
    DocNo/Date      | ( RawMaterial/Coil Code/Desription)  |   (Quantity issued for RM)                  ItemCode/Description | Batchnum
    Regards,
    Vamsi..
    Edited by: VamsamP on Dec 1, 2010 5:06 PM

  • Compressor, Qmaster and Batch Monitor

    Hi,
    Whenever i use any of these apps they constantly come up with the
    'Do you want the application 'xxx' to accept incoming newtork connections' window.
    How can i make this stop? No matter what i click it won't go away it just
    keeps coming back.
    Thanks

    System Preferences > Security > Firewall. How is your Firewall set up?
    I have "Set access for specific services and applicaions" as the active choice.
    I gave Qmaster etc permission to use the network and haven't seen those warnings since.
    While other, legitimate applications will also ask if they can connect, you should be cautious if somthing you don't recognize asks for permission.

  • Batch Monitor and Compressor do nothing when I submit...

    Hey, guys,
    I've re-install the whole OS and Final Cut Studio 2,
    I use Compressor to encode my video clip,
    after setup the format and the destination,
    I click the "submit" Button, the batch job send to Batch Monitor,
    but Compressor and Batch Monitor do nothing, the status bar didn't run.
    Compressor's CPU usage is only about 0.x %.
    Any body have the same problem?
    How to solve this problem?

    hi Thomas!
    I have norton 2005 and turned it off when I downloaded itunes and I get the same result. quicktime will open for me however.
    NIS 2005 is the usual suspect with "symptomless launch suppression".
    first try:
    b noir, "itunes wont open" #6, 02:11pm Oct 3, 2005 CDT
    ... but if no joy with that, try:
    Lorraine M, "NIS/i-tunes problem rectified" #2, 01:51am Oct 17, 2005 CDT
    keep us posted.
    love, b

  • Batch Monitor shows no progress - qmaster doesn't seem to process anything

    I've been using this iMac since my company bought it a year ago and haven't had trouble with compressor until earlier this week when it just stopped working - no error message no crash - its just doesn't process jobs. I haven't updated anything or added any weird software of which I'm aware. Unfortunately I don't have a time machine back up to return to. We have the extended apple care and I haven't reformatted and reinstalled everything yet, I'm desperately trying to avoid that as I've already had to do it once in the past few months and it put me back at least a week of productivity as it took several days to get everything reinstalled. The same is true for taking it to the local apple specialist - took them a week last time I dropped a computer off there.
    Whether its a file that I'm opening in compressor or a project I'm exporting from final cut I can wait for 20 hours and no progress is made I've done a great deal of searching on these as well as other online forums and taken lots of advice given to other people with similar problems and nothing seems to work here's what i've tried in a rough order:
    Checking for Updates
    Resetting back ground processes
    Deleting preferences (for compresser et al)
    turning sharing on/turning sharing off
    starting qmaster using terminal
    restarting qmaster using terminal
    checking qmaster's settings using terminal and setting 'rendering' and processing to 'on'
    Reinstalling compressor,qmaster,qadministrator and batch monitor using Pacifist
    When Reinstalling I never click the box to share processing on a network
    I've tried starting jobs with it disconnected from my office LAN
    I've tried Everything on the compressor troubleshooting basics page including deleting all files associate with compressor, qmaster, qadmin and even motion and reinstalling them.
    after each reinstall I always update compressor as it wont even start in snow leopard without updating
    I've checked in activity monitor - qmaster is running just fine, it appears.
    If anyone has any more suggestions as to things that could be done, please offer them.

    try these initial things:
    • check the QMASTER logs in /var/logs (or simply use the /applications/utilities/CONSOLE.app). IF its failing or stalled there WILL be a reason for it.
    • look for QMASTER crashes logs...... you maybe not be able to red the dump but there will be a common thing in there somewhere...
    • stalled?: maybe sitting in the ACTIVE QUEUE with PROCESSING, but doing nothing.. maybe one of the services has failed. I se an EMAIL address up in the compressor to tell if anything broke. works great!
    • stalled?: maybe your set up the cluster maybe expecting MANAGED SERVICEs and you cluster is not SETup for that.lots of these things.
    anyway, have a look in the console logs and post your stuff. Happy to help you with it.
    I have found the latest qmaster and compressor with FCS3 is very good.
    LAstly, I have had the ODD thing that utilises PERIAN plugins etc t sit and do nothing. PErian ends up dumping.. anyway all this can be worked around.
    w

  • Batch Monitor - Sort Order

    I'm running a series of batch compression jobs of a couple of hundred files each, mainly transcoding, but that's probably irrelevant.
    When I submit a job of (say) 200 files, each called NAME_xxx where xxx is a number between 000 and 200 they appear in compressor in alpha numeric order, as expected. However, when I actually submit the job Batch Monitor seems to display them in a completely random order, even though it's processing them in alpha numeric order.
    Is there any way to rearrange the batch jobs in the Batch Monitor so that it displays them in the order they are going to be processed? It's a real PITA to have to keep scrolling up and down the window looking for where we are in the queue.
    Yes, I tried the 'Sort Order' button but it does not change the order within a single batch.

    when you restart your database, the modification will take effect..
    bye

  • Batch Monitor Wont cancel item :(

    I had a file that I wanted to compress from Motion, so I saved it to my desktop and put it through Compressor. I checked it in Batch monitor as it didn't seen to be doing anything also I spotted that I wanted one more filter on the footage, so I cancelled the file in batch monitor and trashed the desktop original.
    My problem is now everytime I go back into batch monitor after submitting a new file in compressor, the canned file is still there trying to cancel and it wont let me get anything else done.
    Please advise if anyone out there can help, as im going out of my mind trying to sort it out - my last resort is to do a clean install and I really dont want to do that

    Cannot cancel a job in Batch Monitor
    Posted: Jun 6, 2007 4:40 AM
    Reply Email
    I sumbitted a Compressor 3 job, a 10-sec Motion project that I wanted to encode in Flash using the On2 plugin (I also have Flash 8 installed). This kind of job was routine with Compressor 2 and took very little time.
    With Compressor 3, things look weird. I submitted the job and almost 25 minutes later it was still sitting in the job list of the Batch Monitor, its progress bar empty, no processor activity reported. I decided to cancel this job but was not successful. I quit Batch Monitor, trashed permissions of both Compressor 3 and Batch Monitor, deleted the Motion project that was the source of the encode, re-installed Compressor 3 - nothing helps.
    Now whenever I submit a new job it lands in the queue which is being halted by the old indestructible job. This defective job does not progress and I cannot cancel it. If I Reset Background Processing, this job comes back as a new job and sits there ticking off new time. The log follows:
    <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
    <services>
    </services>
    If anyone can tell me how to get rid of this job without erasing the hard drive, I will be very grateful.
    PowerMac G5 DP 2.7 Mac OS X (10.4.9) 3.5 Gb RAM, FCS2
    scutdog
    Posts: 9
    Registered: Jun 3, 2007
    Re: Cannot cancel a job in Batch Monitor
    Posted: Jun 6, 2007 11:56 PM in response to: George Bazhenov
    Helpful
    Reply Email
    Sounds similar to the problem I described in this thread.
    This is how I deleted the entire queue when I couldn't cancel in Batch Monitor:
    1) In the Finder, select the menu item Go->Go to Folder...
    2) Enter /var/spool/qmaster
    3) Trash the folder(s) that you see in that folder
    4) In Compressor, select the menu item Compressor->Reset Background Processing...
    Mac OS X (10.4.9)
    I found this thanks George

  • Batch monitor doesn´t cancel a file

    Hello
    I´m sending some videos to compressor but I want cancel one of them and batch monitor can ´t do it. It always says " cancelling " but doesn´t do it. And I can transcode the other files because it is the first of them

    Have you tried to reset background processing? It is in the menu just below preferences. This should flush out the non-canceling job.

  • Batch Monitor troubles - no progress

    I'd like to export a project from final cut pro (6.0.4) with compressor (3.0.4), as I did about 50 times before. Compressor opens, I choose my settings and click "send". Batch Monitor opens and that's it. No progress in Batch Monitor, no encoding, no failure code, nothing.
    In the information-box I find:
    pid="261" what="service-request" req-id="06B72FBC-BBB5-4F63-B985-6C4CA034BFF2:1" msg="Error: unrecognized request."></mrk>
    What's wrong? If possible I'd like to avoid to reinstall compressor.
    I already deleted the prefs for compressor and batch Monitor, I repaired disk permissions and restarted.
    Exporting the movie with quicktime works fine, exporting audio only works fine, too.
    What's wrong with Batch Monitor? Any idea someone?
    Thx, Wolfgang

    Sounds like Qmaster has missing assets.
    Qmaster is what controls batch monitors, batch lists.
    You will need to reinstall Qmaster again.

  • How to find out batch job failure and taking action:

    Normally We will monitor the batch jobs  through transaction code sm37 for job monitoring. In SM37 we will give a batch job name date and time  as  input. In the first step we will check the batch job for the reason failure or check the spool request for the batch job for failures an help in analyzing the error
    I understand from the my experience is that the batch may fail due to below reasons.
    1.,Data issues :             ex: Invalid character in quantity (Meins) field  >>>> We will correct the corresponding document with correct value or we will manually run or request the team to rerun the batch job by excluding  the problematic documents from the batch job variant  so that it may process other documents.
    2.Configuration issues : Materials XXXX is not extended for Plant >>>> we will contact the material master team or business to correct the data or we will raise sub contract call with support team to correct he data. Once the data been corrected and will request the team to rerun the batch job.
    3.Performance issues : Volume of the data being processed  by the batch job ,network problems.>>>Normally these kind of issues we will encounter during the month end process as there will lot of accounting transactions or documents being posted business hence it may cause the batch job failure as there is enough memory to complete the program or select queries in the program will timeout because of volume of the records.
    4.Network issues. : Temporary connectivity issues in other partner systems :Outage in other partner systems like APO or other system like GTS  will cause the batch job failure as Batch job not in position to connect other system to get the inforamtion and proceed for further steps.Nornmally we will check RFC destination status by running a custom program  weather connectivity between system are in progress or not. then intimate other partner system  for the further actions, Once the partner system comes online then we will intimate the team to restart or manually submit batch job.
    Some times we will create a manual job by transaction code SM36.

    I'm not sure what the question is among all that but if you want to check on jobs that are viewable via SM37 and started via SM36. The tables are TBTCP -Background Job Step Overview and TBTCO - Job Status Overview Table.
    You can use the following FM to get job details:
    GET_JOB_RUNTIME_INFO - Reading Background Job Runtime Data

  • How to view ALL batch job details (SM37) at one glance ?

    Dear all,
    I am documenting all released batch job details, the information required includes the job name, client number, job frequency .. etc.
    In order to see that information, i go to SM37 and click on each job to see the details. I have about 60 jobs released, to get their details i have to click on them at least 60 times.
    Is there a report or table that i can refer to that provides me the information of all the jobs in one screen ?
    Thanks.
    Advice and comment will be appreciated.
    Regards,
    Kent

    Dear Prashanth,
    Thanks for the link, I managed to get the required information from table TBTCO or TBTCP with below selected fields.
    JOBNAME = Background job name
    SDLSTRTDT = Planned Start Date for Background Job
    SDLSTRTTM = Planned start time for background Job
    SDLUNAME = Initiator of job/step scheduling
    PRDMINS = Duration period (in minutes) for a batch job
    PRDHOURS = Duration period (in hours) for a batch job
    PRDDAYS = Duration (in days) of DBA action
    PRDWEEKS = Duration period (in weeks) for a batch job
    PRDMONTHS = Duration period (in months) for a batch job
    PERIODIC = Periodic jobs indicator ('X')
    STATUS = State of Background Job, S = Released, F = Finished
    AUTHCKMAN = Background client for authorization check
    EVENTID = Background Processing Event
    EVENTPARM = Background Event Parameters (Such as, Jobname/Jobcount)
    Dear Juan,
    Thanks for your reply.
    Regards,
    Kent

  • Droplet jobs submitted not showing up in Batch Monitor

    I am compressing MP4 files in large batches of 100-150 files at a time by dragging them over a droplet. I can submit about 4-6 batches in a row, but after that Batch Monitor does not appear to accept anymore batches.
    I can continue dragging files over my droplet and submit the batch. The process completes as if the batch was submitted successfully, but it never shows up in batch monitor and the output files are never created. Any ideas?
    I have three, dual-quad Intel machines with 8 GB of RAM in their own private cluster processing my jobs.

    Setting found to increase number of jobs.

  • Submited Jobs not showing up in Batch monitor

    I just got done with a reinstall of compressor and Qmaster with some positive results. I can now start a quickcluster just fine, and have it show up in compressor and submit to it. When i click the submit button, The batch doesn't show up in batch monitor. Even when i try submitting it "My Computer" it still fails to show up in batch monitor.
    Anyone have any ideas?

    Batch monitor was set to list completed jobs. I'm an idiot.

Maybe you are looking for