Job executing the SSIS pkg via cmdExec line step not picking the config details

Job executing the SSIS pkg via cmdExec line step not picking the config details (of prod server connections/parameters)
specified in dtsConfig file and by default using the values present in the pkg (which is of dev env). I have to open the package
uncheck "Enable package configuration" save the package and check it again and save again then the package will use the prod config.
What could be the reason? and how to fix this?
The SSIS pkg and the dtsCofig reside in same folder of network drive.
SQL Server R2 Ent Ed
Thanks

Hi Ramzi24,
This is the by design behavior. The Dtexec utility will apply the default package configurations for the second time after applying the options specified in the command lines or other package configurations configured in the job step. In this way, as long
as the default package configurations file is valid, the configurations of it cannot be overwritten.
If the package is not deployed/installed, the Dtexec utility looks for the XML configurations file according to the file path defined in the Package Configurations Organizer window. In this situation, you need to either disable the package configurations or
modify the XML file path in the BIDS.
If the package is already deployed/installed, you need to modify the package as above or re-specify the install folder for the package configurations file.
Reference:
http://technet.microsoft.com/en-us/library/ms141682(v=sql.105).aspx
Regards,
Mike Yin
TechNet Community Support

Similar Messages

Report not picking the template

Hi all,
I built and registered a rtf template to an Oracle Report(print purchase orders), which is typically run
while approving a PO by selecting the check box (PRINT) in the Approve Documents Form. But Its not picking the
template instead it prints the XML Data. Do I need to call the template through the report trigger.
In other words, How to apply rtf template for the cocurrent report w/ short name, POXPPO? Please Help.
Thanks,
kalyan.
Edited by: kwin on May 21, 2010 6:22 AM

Hi
We had similar issue while submitting BI Publisher report from Shipping transaction form though report is associated with template and data defintion.
To fix we need to another setup through responsibility System Administration > Concurrent Programs > Define query for concurrent program choose update and go to onsite setting tab, In template choose template in LOV after it worked with out any issues. Try similary for this issue it might work. If this doesn't work create forms personalization on approving PO call that step where you can call plsql program, in plsql program you can call template use standard API's before submitting concurrent program
Let me know if this as worked
Thanks
Kamalakar.G

TS1363 my iphone 5 is blank an when conected to a power source it just flashed on an off with the apple logo, my laptop is not picking the device up either?

my iphone 5 is blank and when connected to a power source flashes on an off with the apple logo, also my laptop is not picking the iphone up in itunes when i click on devices?

Try restarting the phone by holding the power buton and home buttion for 10 - 15 second
Apple logo should appears and your iTunes should detect the phone

SSIS ETL does not pick the file from Share point when it execute through SQL Agent job

I have created one SSIS packages, which pick the file from the Share point document library. its work successfully, once it execute through the VS project application.
But when i create a job in SQL Server Agent for this package then it does not pick the file and job getting fail.
Just for more update, SQL Server has been install in Cluster mode and using BIDS 2012 with SQl Server 2012.

Hi PriyankGupta,
SQL Server Integration Services is not cluster awareness, and does not support failover from one cluster node to another. So, in your clustered environment, make sure SSIS is installed on each node in the cluster. In other word, SSIS must be installed on
the server where the SQL Server Agent job is created.
If you use any third party task/component or drivers, make sure they are installed on the SQL Server Agent job server. Besides, also pay attention to the protection level of the package as well as 32-bit or 64-bit runtime mode of the package. For more information,
please see:
http://social.technet.microsoft.com/Forums/systemcenter/en-US/e13c137c-1535-4475-8c2f-c7e6e7d125fc/how-do-i-troubleshoot-ssis-packages-failed-execution-in-a-sql-agent-job
If the issue persists, please post the error message in the job history for further analysis.
Regards,
Mike Yin
TechNet Community Support

Purpose: to create photo galleries to insert or not items: 1) with phocagalery, it works 2) with the transfer via lightroom, I do not see the downloaded files but if I want to create a directory folder with the same name, he said he is already, I see noth

purpose: to create photo galleries to insert or not items:
1) with phocagalery, it works
2) with the transfer via lightroom, I do not see the downloaded files but if I want to create a directory folder with the same name, he said he is already, I see nothing in the media in content management
Can you help me

Mahsa21,
We are glad that we were able to resolve the international calling plan issue for you. If you need assistance,please reach out to us.
thanks,
Tonya D.

HT1844 Library Issue: I just imported 2 CD's into ITunes. They show up in "Recently Added" and on my other devices via ITunes Match, but NOT in the ITunes software on the computer where I added them.

Library Issue: I just imported 2 CD's into ITunes. They show up in "Recently Added" and on my other devices via ITunes Match, but NOT in the ITunes software on the computer where I added them. They show up in the search box, but when I click on the results it just kicks me to ALL my music. I have imported thousands of songs/CD's before and this is a new one.

Something may have gone wrong with the index of the Music playlist. Making another change to the library such as downloading the current iTunes Free Single of the Week, or deleting one track from your library and reimporting it, should fix the problem.
If that doesn't work close iTunes and delete the hidden file sentinel from inside the main iTunes folder, then start iTunes again. It should run a consistency check when it starts up which ought to correct things.
tt2

When I make a purchase in the app store via paypal it redirects me to the paypal website to add a credit card. However, my paypal is linked to my account directly and I have no card. What can I do?

When I make a purchase in the app store via paypal it redirects me to the paypal website to add a credit card. However, my paypal is linked to my account directly and I have no card. What can I do?

Welcome to the Apple Community.
Start here (change country if necessary) and navigate to 'Password and Security', reset your security questions using the link provided, you will receive an email to your rescue address, use the link in the email and reset your security questions.
If that doesn't help, you don't receive a reset email or you don't have a rescue address, you should contact AppleCare who will initially try to assist you with a reset email or if unsuccessful will pass you to the security team to reset your security questions for you.
If you are in a region that doesn't have international telephone support try contacting Apple through iTunes Store Support.

The name of the security certificate is invalid or does not match the name of the site error?

I am looking for some help folks. We are in a Outlook 2007/Exchange2010/Windows2008R2 environment.
When users open Outlook off the network, and occasionally on the network, they get the error
The name of the security certificate is invalid or does not match the name of the site error
The CAS hostname is HRECAS.XXX.ORG. The URL that is listed on the SSL certificate (issued by VeriSign) is WEB.XXX.ORG. WEB.XXX.ORG is what users use to get to OWA and such.
When I use testexchangeconnectivity.com, under certificate name validation I see an error that reads:
Host name autodiscover.xxx.org doesn't match any name found on the server certificate CN=web.xxx.org.
Does this mean somehow we have to add autodiscover.xxx.org on the certificate?
I tried to add AutoDiscoverExternalUri using
http://support.microsoft.com/?kbid=940726 &
http://social.technet.microsoft.com/Forums/en-US/exchange2010/thread/2d0c0f5f-e4ec-4f33-a37d-b94fd7a2319f on the CAS server.
Set-ClientAccessServer -identity HRECAS -AutodiscoverServiceExternalUri
https://autodiscover.xxx.org/Autodiscover/Autodiscover.xml
I get an error that says
"a positional parameter cannot be found that accepts argument '-AutoDiscoverExternalUri'.
Can someone point to me what I am doing wrong with the command and whether I should be concerning myself with adding that line? By the way the
InternalUrl information is already configured on the system. Also should I edit the certificate to add autodiscover.xxx.org?
Thank in advance for your support.
TD
TD

Hi Tapera,
Thanks for the question.
SRV record is a good idea. You can set the SRV to
https://web.abc.com/autodiscover/autodiscover.xml but you must make sure the
url can be resolved from External clients.
In addition, there is still a issue. It is hard coded that Outlook will find the autodiscover by the orders below:
1. Access autodiscover via SCP in AD.
https://web.abc.com/autodiscover/autodiscover.xml
2. If SCP access fails, it will try:
https://abc.com/autodiscover/autodiscover.xml
3. Then
https://autodiscover.abc.com/autodiscover/autodiscover.xml
4. Local XML file
5. SRV record
As you can see, Outlook will try SRV record at last. Therefore, it will still try to access
https://autodiscover.abc.com/autodiscover/autodiscover.xml each time you run Outlook. Then the certificate warning will still persists.
I have a workaround solution. You can do a local policy to disable the autodiscover to access the
https://autodiscover.abc.ocom/autodiscover/autodiscover.xml by:
1.
On the Outlook client machine, open regedit and add the following key:
HKEY_CURRENT_USER\Software\Microsoft\Office\12.0\Outlook\Autodiscover
         "ExcludeHttpsAutodiscoverDomain"
         "ExcludeHttpsRootDomain"
2.
Then set the value to “1” on the above two keys.
Thanks,
Simon

Cost estimate (CK11N)is not picking the overhead cost for some of the mat

Hi all,
we are facing a problem. The overhead key is defined. the calculation base is defined in the cost sheet. But the overhead cost is not picking for some of the materials
Bad Material 5019-0581 via CK11n.
As you can see in the itemization, only the material and the routing are listed. No amounts from the OH of ZPTA ( .10). It should show a line #5 with an amount of (28 quantity x .10) = $2.80 added to the Total value.
first three line items it is picked from material and fourth line item from the internal activity.
the fifth item from G overhead is not picked.

Hi,
Check whether u have assigned the cost sheet in u r costing variant which is being used in CK11N.
Regards
SudhakarReddy

How do I get messages to go back to an AIM account? It's only seeing the iPad's Facetime email address and not seeing the old AIM account name that is on my desktop. I am using my iMac using iChat to talk to a newer iMac that doesn't have iChat.

How do I get messages to go back to an AIM account? It's only seeing the iPad's Facetime email address and not seeing the old AIM account name that is on my desktop. I am using my iMac using iChat to talk to a newer iMac that doesn't have iChat. We had this working using Messages and Facetime (on the new machine) talking to my existing iChat account. One day last week, when Facetime rang, my kids answered on the iPad. Dang! Now it's all fouled up! The new iMac won't see my AIM account name and shows that I'm offline, because the iPad is off. We were able to call using "most recent call" in Facetime, but now I can't go and control that new iMac remotely to help with some email concerns the user is having. I'm trying to not personalize this too much, but it's grandkids talking to Grandma and Mom and Dad trying to solve new machine hiccups. Normally, I could just go in via iChat and control the other machine and troubleshoot, but I can't do it with Facetime only. My buddy list doesn't see the other computer even though we are connected on Facetime right now. My name is not highlighted for the other computer. What could have gone so wrong?
Any help would be appreciated.

How do I get messages to go back to an AIM account? It's only seeing the iPad's Facetime email address and not seeing the old AIM account name that is on my desktop. I am using my iMac using iChat to talk to a newer iMac that doesn't have iChat. We had this working using Messages and Facetime (on the new machine) talking to my existing iChat account. One day last week, when Facetime rang, my kids answered on the iPad. Dang! Now it's all fouled up! The new iMac won't see my AIM account name and shows that I'm offline, because the iPad is off. We were able to call using "most recent call" in Facetime, but now I can't go and control that new iMac remotely to help with some email concerns the user is having. I'm trying to not personalize this too much, but it's grandkids talking to Grandma and Mom and Dad trying to solve new machine hiccups. Normally, I could just go in via iChat and control the other machine and troubleshoot, but I can't do it with Facetime only. My buddy list doesn't see the other computer even though we are connected on Facetime right now. My name is not highlighted for the other computer. What could have gone so wrong?
Any help would be appreciated.

Could not load file or assembly 'Microsoft.ReportingServices.SharePoint.ObjectModel' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)

Could not load file or assembly 'Microsoft.ReportingServices.SharePoint.ObjectModel' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
===========================================================
This is a SQL Server 2012 Developer Edition of SSRS.
I am getting this error when navigating to http://servername/Reports. The reports site was working fine, until I installed a SQL 2014 Developer instance (including SSRS) on the same server.
I can still get to the http://servername/ReportServer site.
Neither of these are using Sharepoint.
Any help resolving this issue would be greatly appreciated.
Below is the stack trace.
===========================================================
[FileLoadException: Could not load file or assembly 'Microsoft.ReportingServices.SharePoint.ObjectModel' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)] System.Reflection.Assembly._nLoad(AssemblyName
fileName, String codeBase, Evidence assemblySecurity, Assembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection) +0 System.Reflection.Assembly.InternalLoad(AssemblyName assemblyRef, Evidence assemblySecurity,
StackCrawlMark& stackMark, Boolean forIntrospection) +416 System.Reflection.Assembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) +166 System.Reflection.Assembly.Load(String
assemblyString) +35 System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +190 [ConfigurationErrorsException: Could not load file or assembly 'Microsoft.ReportingServices.SharePoint.ObjectModel'
or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)] System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +1149
System.Web.Configuration.CompilationSection.LoadAllAssembliesFromAppDomainBinDirectory() +323 System.Web.Configuration.CompilationSection.LoadAssembly(AssemblyInfo ai) +116 System.Web.Configuration.AssemblyInfo.get_AssemblyInternal() +36 System.Web.Compilation.BuildManager.GetReferencedAssemblies(CompilationSection
compConfig) +212 System.Web.Compilation.WebDirectoryBatchCompiler..ctor(VirtualDirectory vdir) +174 System.Web.Compilation.BuildManager.BatchCompileWebDirectoryInternal(VirtualDirectory vdir, Boolean ignoreErrors) +57 System.Web.Compilation.BuildManager.CompileWebFile(VirtualPath
virtualPath) +295 System.Web.Compilation.BuildManager.GetVPathBuildResultInternal(VirtualPath virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile) +482 System.Web.Compilation.BuildManager.GetVPathBuildResultWithNoAssert(HttpContext
context, VirtualPath virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile) +108 System.Web.Compilation.BuildManager.GetVirtualPathObjectFactory(VirtualPath virtualPath, HttpContext context, Boolean allowCrossApp, Boolean
noAssert) +171 System.Web.Compilation.BuildManager.CreateInstanceFromVirtualPath(VirtualPath virtualPath, Type requiredBaseType, HttpContext context, Boolean allowCrossApp, Boolean noAssert) +52 System.Web.UI.PageHandlerFactory.GetHandlerHelper(HttpContext
context, String requestType, VirtualPath virtualPath, String physicalPath) +53 System.Web.HttpApplication.MapHttpHandler(HttpContext context, String requestType, VirtualPath path, String pathTranslated, Boolean useAppConfig) +519 System.Web.MapHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
+176 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +274
===========================================================

Hi Glen，
"The located assembly's manifest definition does not match the assembly reference." is generally caused by the loaded assembly's version is different than the expected version application refers to.
In this case, it should be caused by:
While starting Report Manager, the backend process ReportingServiceService need to load assemblies it refers to
ReportingServiceService reads the compilation/assemblies element from web.config(under Report Manager virtual patch)
If the compilation/assemblies is not existing, ReportingServiceService loads all assemblies from Bin folder. It can be verified from call stack System.Web.Configuration.CompilationSection.LoadAllAssembliesFromAppDomainBinDirectory(). ReportingServiceService
uses System.Reflection.Assembly.Load with the assemblies' name only to load assemblies.
The Assembly.Load tries to load from the specify assembly by name from GAC at first. If it is found from GAC, it won't be loaded from Bin folder any more.
Since Reporting Service SharePoint Integration mode is installed, a same assembly of 'Microsoft.ReportingServices.SharePoint.ObjectModel' with different version might be installed to the GAC. That causes the error "The located assembly's manifest definition
does not match the assembly reference."
For more information about the error message and the loading process, please see:
http://blogs.msdn.com/b/junfeng/archive/2004/03/25/95826.aspx
https://msdn.microsoft.com/en-us/library/yx7xezcf(v=vs.100).aspx
Thanks,
Jinchun Chen

Sender File adapter not picking the file ABCD.PRN extension file

Hi
Am doing File to Abap Proxy scenario. My source will be in text format of fixed length of fileds 7.
My souce file will be generated by a third party machine with the extension EEE150809.PRN. In my scenario my file adapter should pick the file and update the same in ECC via a Proxy.
I have configured the Sender File adapter with Message Protocol - Content Conversion but file adapter is not picking the file. I have checked the Communication channel and status is fine. But the same Communication Channel works for .XML file.
What are the parameters that I have to consider with the file extension .PRN using File adapter?
Thanks.
S.

Hi Swarna,
You dont need to worry about the extension when picking the file. You can try using EEE* so that is picks all the files starting with EEE. If you have the fixed name then you can try giving EEE150809.*. Also EEE150809.PRN should not have any issue. Try to see in sender commu ication cahnnel for anyerrors. Probably there might be some network issues or authorisation issues. If you are reading with NFS then ask them to give necessary permissions. If you are reading through FTP check the user id and pwd you are using.
Regards,
---Satish

How do I extend my WiFi with Airport Express? I have Ethernet in the house and an Wifi that do not cover the whole house. I do not get it to work.

I have Ethernet in the house and an Wifi that do not cover the whole house. I do not get it to work. I have tried to get it into my network and it get connected via the WiFi but not the Ethernet. Also when it gives a green light I cannot see that it is giving any signals to my devices (iPhone etc).

You need to pay attention to something, while extending your network with the latest AirPort Express upgrade, your devices will be connected to it except your iPhone, you'll see your iPhone always connected to the capsule instead, even if you're at 1 foot from the AirPort Express.
You need to change the radio settings from automatic to 802.11a - 802.11b/g on your capsule, then I put it back to the default settings...
Now in the AirPort utility you should see your iPhone connected to the AirPort

The cumulative balance displayed in FS10N does not match the sum of the det

Hello,
The cumulative balance displayed in FS10N does not match the sum of the details. For example, we have a GL disbursement account that has a ***. Balance of 8 million. The debit is 2 million and the credit is 10 million. But, when you drill down on the ***. Bal. for the current period, the sum of the details is 9 million. According to our users, the 2 balances should equal. I did a search in this forum and found 1 post stating they had the same issue and the answer was to run f.16. Has anyone experienced this and if so, how did you handle it? I'm not sure how f.16 functions. Do we have to run it for each consecutive year? I'm not a FI specialist. I'm responsible for data archiving and the users think it's related to archiving. However, we have a test system that was resynced with production prior to when archiving was done and it shows that this issue is pre-existing.
Thank you very much in advance,
Lourdes

Hello,
There is a possibility that you have activate line item display for some of the accounts at a later stage. Meaning that earlier postings were not be shown for the earlier postings but only totals will be made available. Therefore, obviously there is bound to be difference between line item report and totals report.
You need to identify which accounts are being changed with line item display at a later stage.
In case if you forget to keep GL Line item display for an account, but the posting are already made the following steps you would required to get the line item display retrospectively.
1. Note that you are NOT required to make the balance of that GL account to ZERO. Please do not confuse with Open Item Management.
2. Put the check box line item display for the account in FS00. Make sure you are entering right company code.
3. Block the account for posting in COA Segment and Company Code Segment in FS00
4. Go to SA38 and run program RFSEPA01 (Give correct GL Account and Company Code)
5. Now, remove the block you kept on the GL Account in FS00.
This will reset the line item display retrospectively.
Hope this will solve your problem.
Regards,
Ravi

Query Designer is not picking the host:port

Dear All
We have installed BI 7.0 on Netweaver 2004s alongwith BI Java. When we run a query and execute it does not pick the hostname:port but come as
http:///irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=ZSD_C03_Q009&VARIABLE_SCREEN=X&DUMMY=1
Please check i have activated all services in SICF and SMICM - all the services is running
and i have added the icm/hsotnamefull in the instance profile also.
is there any thing missing.
Whether PI/Xi is to be also installed and u think it is necessry to configure SLD?
regards
balaji

Japnese yen is maintained in units of 100. Check the entry in TCURX table for Yen. That is why the value is getting multiplied by 100 and getting displayed.
JPY (Japanese Yen) and others have a 0 in the TCURR-CURRDEC field which means 0 decumals. SAP applications will process amounts in these currencies by dividing the input value by 100 for storing in tables. Then, when being displayed, it will do a conversion exit and multiply the stored table value by 100 to show the correct amount.
SAP stores currency values in a data type that has a fixed interpretation of two decimal places. There are some currencies that do not work well with that setting. Usually that is because for some currencies , a fraction o the currency unit is meaningless. That is true of the Japanese Yen, the Turkish Lira, Korean Won and many other currencies whose value is often 10 US cents or less.
Here's a full explanation of the decimal issue in SAP. It is not just
limited to BW but is a system-wide situation.
1. By default there are two decimals on the data base, e.g. 123.45
2. When there is no corresponding entry in TCURX, these two decimals
are displayed in the query.
3. When there is an entry in TCURX, it determines the division factor
when reporting. (default = 2)
Example TCURX = NO ENTRY: Database entry = 123.45
There is no division
The above number is displayed as 123.45
Example TCURX = 3: Database entry = 123.45
There is a division by 10 (because 3 - 2 = 1).
The above number is displayed as 12.345.
example INR currency.
Example TCURX = 0 Database entry = 123.45
There is a division by 0.01 OR Multiplication by 100

Job executing the SSIS pkg via cmdExec line step not picking the config details

Similar Messages

Maybe you are looking for