Job failing in the source system.

Hi all,
I am loading data to a data store object from a R/3 system.
The job is failing in the source system with the error - ABAP/4 processor: UNCAUGHT_EXCEPTION
Can anyone help me resolving this error?
Thanks in advance.
Regards,
Deepti.

HI,
This is very generic and seems like a short dump...can you check in ST22 in the source system and see if there is any entry for ALEREMOTE check the the error log and the step where it failed??If you can analyze it and come up with the answers then people can help you here.
Also what kind of data source it is??
Was the load full or delta??
Thanks
Ajeet

Similar Messages

  • How can we change the Job priority in the Source system

    Hi All,
    We are facing an issue with the process chain execution in the Production system. We have a process chain which runs daily in BI system and the chain is designed in such a way, that as soon as the chain starts in BI system,  a corresponding job is triggered in the Source system (ECC  6.0system).
    Now the issue is that after we have our Source system upgraded the memory allocation for the particular Job (FIGL )is reduced and due to which the FIGL job is failing frequently. When we have consulted some experts.They  advised Us to increase the Priority of the Job in source system to A/1, as of now the job is running in B/2 priority.
    Please let us know the way how we can increase the priority of the Source system Job, so that when the process chain triggers a job in source system and that particular jobs  should run with Priority A/1.
    Thanks in advance.
    Regards,
    Chandra.

    Hi Chandra,
    First please find the job name in SM37 for FIGL and check the job status to be in "released" status. Select that job and go to job menu and click on change. then it will take you to the job screen where you have "job class". Here you can change the job class to "A" to get to high priority.
    If you are unable to edit the job then create a new job with the same variants by clicking STEP button in the Job screen.
    Try these steps, let me know if are able to do so.
    Regards,
    Ravi Kanth

  • Job Cancelling in the Source System

    Hi,
    Few days back (one week) our R/3 System upgraded with ECC 5.0, from that day onwards some of the master data loads failed.Whenever we retriggered the infopackage the Job in the R/3 side was immediately(automatically) cancelled.(we tried 3times).
    So, please give any suggestions how to get rid of these errors.
    Best Reagards
    Shyam/venkata

    Hi,
    well basically we need some more information. Do you get any job logs, system log entries (sm21) or short dumps (st22) in the source system as well as the BW system? What messages do you get in the request monitor?
    Keep us updated!
    Siggi
    PS: in the meanwhile this might be of some help: /people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
    Message was edited by: Siegfried Szameitat

  • Job terminated in the source system

    Hi BW ens,
    when i try to load data i am getting error as below.
    Error message when processing in the Business Warehouse
    Diagnosis
    An error occurred in the SAP BW when processing the data. The error is documented in an error message.
    System response
    A caller 01, 02 or equal to or greater than 20 contains an error meesage.
    Further analysis:
    The error message(s) was (were) sent by:
    Second step in the update
    **when i tried to see in the source system it is showing like  :Extrapolation cannot be carried out because no inst. has been allocated"and "ABAP/4 processor: CONVT_NO_NUMBER:**
    **pls let me know how to overcome this problem in loading.**
    regards
    Ravi

    Hi Ravi,
    U can check the Job logs in SM37 !!!!!
    Apart from that  i think there is a lock that has occured ,goto SM12 and unlock the objects.
    Reload the data at the point where the error has occured ,It should be fine.
    Rgds
    SVU123

  • Job Termination In the source system (TSV_TNEW_PAGE_ALLOC_FAILED)

    Hi Experts,
       I have a load in bw which extracts the data from R/3.  In the IP selection i have OLAP variable set to 0calmonth and the selection is one month.  The loads gets failed with the page allocation error in the source system.  I tried reducing the packet size with different option.  Still i couldn't complete the load.
    If any one come across with this kind of situation please help to resolve this issue.
    Thanks
    Deepthi

    Hi ,
    Below are the parameters and values for them which are recommended by SAP.There is a SAP Note available for this.ASk yr basis consultant to check the notes.
    ES/TABLE                    SHM_SEGS
    ES/SHM_SEG_SIZE             2048
    em/global_area_MB           250
    abap/heap_area_total        4000000000
    abap/heap_area_dia          2000000000
    abap/heap_area_nondia       2000000000
    ES/SHM_PROC_SEG_COUNT       16
    ES/SHM_MAX_PRIV_SEGS        15
    ES/SHM_USER_COUNT          2048
    ES/SHM_SEG_COUNT           2048
    Need to do a system bounce for the parameter change to take effect.
    Regards
    Balaji

  • An error occured in the source system

    My process chain has been doing FULL load for COPA data in a ODS. It failed today saying
    Diagnosis
    An error occurred in the source system.
    System response
    Caller 09 contains an error message.
    Further analysis:
    The error occurred in Extractor .
    Refer to the error message.
    When I click on indiv. Message tab I get "Job in source system terminated - Requests is set to red"
    What should I do to resolve the problem.

    For Source system R3 :
    This particular problem "Job terminated in the source System" occurs when there are long running jobs in the backend.
    In the monitor tab,
    Environment --> Job Overview --> In the source system.
    After logging into the source system, click execute
    Check the status of the job i.e. active or failed.
    Check the job log for the same.
    If its " DBIF_SQL_..... " sort of error, then in this case, delete the request from the data target and reload again.
    The load would be successful
    Caller 09 error normally occurs when the source from which the datasource is picking up data may be in use on the R3 side.
    Hope this helps!!!!!!!

  • Error in the Source system while data loding through Process Chain

    Hi,
    I am facing issue while data loading for certain extractors through Process chain. Load of 0BPM_WIHEAD, 0BP_LOGHIST, OBPM_OBJREL, 0BPM_DEADLINES(there are 2-3 more extractors) is getting failed daily with message Error occurred in the source system and if we repeat the same it is getting executed successfully.
    Regards,
    Javed

    Hi..
    It means that the extraction job is failing in the source system..
    Please check the Job log in the source system  --> Copy the request nimber --> In the source system go to SM37 --> Give * then the request number......execute --> Check the Job log..
    Look there may be multiple reasons behind this....
    1) Connection problem : Go to SM59 and test the connection, If you don't have the access in SM59...then go to RSA1 --> Source Systems --> Right click --> Connection Parameters --> Connection Test
    2) Or may be work processes are not available and due to which jobs are failing due to time out...
    In both the cases you can check with the Basis Team if they can suggest something....or you can change the process chain scheduling time if possible, and schedule it in such a time when less no of jobs are running..
    Regards,
    Debjani..

  • Job is not in Active mode, still in Ready mode in the source system

    Hi Folks,
    Process Chain carrying some data loads asusally today also, i noticed there is no action in the details tabs, then i checked in the source sytem, jobs in ready mode. why it is turned like this.
    Can any one provide your valuable inputs on this...
    Thanks,
    V

    Hi ,
    Thanks for your quick responce on this..
    My issue has been resolved: Issue occured due to in the source system issue. All BW job has been scheduled in one particular application server which is facing more than issue.
    Basis team involved and resolved them.

  • Jobs are cancelled in source system

    hI all,
               i scheduled process chain. load was  chain was failed .failed request is showing jobs are cancelled in source system? why jobs are cancelled in source system & how to solve this error.
    Thanks,
    chandu

    Try to repeat the process manually, as a temporary fix.
    Check in SM58 and BD87 for pending tRFCs and IDOCS and puch them using F6
    But you can analyze as advised by BR and Venugopal.
    Hope it helps,
    Naveen
    Edited by: Naveen Vytla on Jul 21, 2008 2:46 PM

  • Infosource 8ZISCMS10 is not defined in the source system

    Hi Gurus,
    I got an issue when loading the data with in SAP BW (Info source is ODS),It threw an error message stating "Infosource 8ZISCMS10 is not defined in the source system",
    Could any one of you help me in this regrad plz,
    N:B: I have activated the transfer structure through RS_TRANSTRU_ACTIVATE_ALL  and replicated the data sources before loading...

    When u activate DSO/ODS (say ZISCMS10) it creates datasource (8ZISCMS10) & Infosource (8ZISCMS10)
    U can check these at ...... Modeling --> Datasources -> BI -> BI source system name. If it is missing .. reactivate DSO/ODS.
    If the load is failing in QA, u should rereactivate DSO/ODS in DEV and transport that to QA.. After transport.. make sure datasource (8ZISCMS10) & Infosource (8ZISCMS10) appears in QA (Modeling --> Datasources -> BI -> BI source system name)

  • Error: Infoobject is not defined in the source system

    hi
    (I posted this in other forums as well - but wondering, it it should be here in BCT/Extractors - I could use more help).
    this is my issue:
    I am trying to load master data (attr) for an infoobject.
    But, it fails with the following error message (when I click on the "Error message" button on the "monitor" screen.
    "Infoobject is not defined in the source system"
    "Erros in source system".
    (I did rsa3 and find it has some data + i checked on the base table as well, it has data; the datasource is from an SRM system) Why is it complaining like this.
    any help on what could be wrong here? Pl let me know,
    thanks

    Thanks Ricardo,
    I have tried that b4. and it says the "source system connection is OK".
    any other idea?
    Do I have to install the infoobjects on the source system as well? SRM is my source system.. I am not sure on that, but If I have to, how do I do that?
    thanks
    Message was edited by: Esan

  • An error occurred in the source system when running infopackage

    Hello,
    I am using 0CO_PC_PCP_03 (Product Cost Planning: Itemizations Costing) and cube 0COPC_C10 (Exploded Itemization) in BI. RSA3 extractor checker shows that there is data if you put in a period.But as soon as I run the infopackage I get error    :
    Error message from the source system
    Diagnosis
    An error occurred in the source system.
    System Response
    Caller 09 contains an error message.
    Further analysis:
    The error occurred in Service API .
    Refer to the error message.
    Procedure
    How you remove the error depends on the error message.
    And i did put in the period in the internal formatfor  FROM and TO in the selection tab on the infopakand  but I am still getting the same error.
    And when i go into details it gives me " Error occurred in the data selection "
    Please assist
    Thanks

    I followed what you & Tarun advised and it shows the job as finished.Also this is what the log read:
    Date        Time      Message
    04/03/2009  12:49:29  Job started
    04/03/2009  12:49:29  Step 001 started (program SBIE0001, variant &0000000000160, user ID DEVERP100)
    04/03/2009  12:49:29  Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
    04/03/2009  12:49:29  DATASOURCE = 0CO_PC_PCP_03
    04/03/2009  12:49:29  RLOGSYS    = DEVBI100
    04/03/2009  12:49:29  REQUNR     = REQU_4DCA7N474P53QS8FJQ0RAKOW5
    04/03/2009  12:49:29  UPDMODE    = F
    04/03/2009  12:49:29  LANGUAGES  = *
    04/03/2009  12:49:29  *************************************************************************
    04/03/2009  12:49:29  *          Current Values for Selected Profile Parameters               *
    04/03/2009  12:49:29  *************************************************************************
    04/03/2009  12:49:29  * abap/heap_area_nondia......... 2000683008                              *
    04/03/2009  12:49:29  * abap/heap_area_total.......... 2000683008                              *
    04/03/2009  12:49:29  * abap/heaplimit................ 40894464                                *
    04/03/2009  12:49:29  * zcsa/installed_languages...... 1NEFDIJLPS                              *
    04/03/2009  12:49:29  * zcsa/system_language.......... E                                       *
    04/03/2009  12:49:29  * ztta/max_memreq_MB............ 2047                                    *
    04/03/2009  12:49:29  * ztta/roll_area................ 3000320                                 *
    04/03/2009  12:49:29  * ztta/roll_extension........... 2000683008                              *
    04/03/2009  12:49:29  *************************************************************************
    04/03/2009  12:49:29  Synchronized transmission of info IDoc 3 (1 parallel tasks)
    04/03/2009  12:49:29  IDOC: Info IDoc 3, IDoc No. 6812, Duration 00:00:00
    04/03/2009  12:49:29  IDoc: Start = 04/03/2009 12:49:29, End = 04/03/2009 12:49:29
    04/03/2009  12:49:29  Job finished

  • 'Error Occured in the Source System' for Non SAP system

    Hi Gurus,
    We have an Info Package which is getting the data from the Source System 'DOCP' and it has failed due to 'Error Occured in the Source System'.Since the source system is Non SAP system there is no option 'Replicate Data Sources'.So,First I activated the transfer rules by the program and ran the package again .But again the same error occured.
    Please suggest me how to proceed for this error for Non SAP Systems?

    Hi,
    Check the RFC connection in SM59 and reactivate the source system again.
    Hope this helps..
    Thank you,
    S R.

  • Error occured in the Source system while loading mater data

    hi all
    While loadng the master data info package.The request is getting failed with error occured in the source system.
    error message says "<b>if the source system is a Client Workstation, then it is possible that the file that was to be loaded was being edited at the time of the data request. Make sure that the file is in the specified directory and is not being edited, and restart the request</b>".
       I had tried repeating the Request but again It is getting failed.
       please help me resolving the issue.
      Thanks(=Points)
          Priya

    Hello Priya
    If u r loading thru flat file
    1. Check the correct path in infopackage
    2. Check if it is opened,if it is then close it and run package again
    If loading thru R/3
    1. Check DS is not opened in change mode
    2. Check if RSA3 is able to extract data...if it is then check in RSA7 and chk IDOC status...
    3. Are you running init..then make sure no document is posted in R/3 side...
    Thanks
    Tripple k

  • Error in the Source System...

    Hi
      <b>RSA1-->Source System >(Context Menu)> Check</b>
    <b>Error:</b>
    <b>The BW IDoc type ZSBA011 is not the same as the source system 
    IDoc type ZSBD012                                                                               
    </b>                          
    Thanks

    Hi BW KING,
    This error due to RFC connect is not there between BW to Sorce system.
    OR else There is RFC connection mis match.
    You have to ask the BASIS People to correct the RFc connection between BW to your source system.
    Other wise data will not get it will show RFC connection Failed.
    Thanks,
    kiran.

Maybe you are looking for