Job for InDesign programmer in Bangalore

Hi,
A Bangalore,India based reputed Software company is looking for InDesign programmer.
Those interested kindly send their contact information on the following mail id [email protected]
Regds

Here is how we work:
We create brochures for a furniture store. We are 6 designers, 1 image editor and 6 photographers who work parallel on the same project. We use Bridge to browse and stay up to date. Each spread is a separate InDesign document. A brochure with 20 pages consists of 11 indd-files. The background is that all designers can work on the same project. Every designer has its main resort. But the articles one spread can be from different departments and we need to see in Bridge the whole spread to see it. Ready pages are visually marked in the document for the image editor, so he sees where pictures need to be retouched. Now with single pages he sees only have of its work. Also it was good to browse through old brochures to look for special marketing layouts and to generally get a feel during designing if it looks "nice". Exporting PDFs is on our network architecture a time consuming procedure, since all elements are stored on different network shares. The whole process of creating the brochures takes place on servers. We are not allowed to store any data on our local machines. Due to the fact that all data needs to backed up and there ware always persons who "forget" to put its daily work back on the server.

Similar Messages

Job for Programmer

Real job at home for IT (programmer, webmaster, webdesign, webpromotion, translator, copywriting and etc). 1000 more project can you follow but you must have skill to finish project, you can select project appropriate you skill and you will be pay after you finish project.
This is serious job so please read all guide and tips trick how wons project because much worker confused how to get project after they sign-up. in this site will be explain step by step how to get project.
http://freelancer-it.co.nr
Edited by: bamba on Dec 10, 2007 5:43 PM

you can select project appropriate you skill and you will be pay after you finish project.Maybe I would take this seriously if you could write in proper English.

Looking for a Programmer to Create A YouTube "Embed" Plug In

Hello everyone,
I am Looking for a Programmer to Create An Acrobat Pro "Embed" Plug In based on the free YouTube API.
The purpose of this is to be able to easily embed YouTube Video's within Acrobat documents so that It can stream the content into the PDF file.
Many have suggested to download the content and embed it, but doing so will violate the user agreement with YouTube plus it would increase the size of the PDF file consideribly.
If there are any Programmers out there that would be interested in taking this project on please let me know. I believe there is a real need for this tool which people would really like to have.
The programming goals for the project would be as follows:
1. Take the Free YouTube API and create a plug in for Acrobat that would allow you to easily embed content into any PDF.
2. The "Embed Plug-In" Would essentially allow you to just copy and past the embed codes from YouTube, Hulu, or any other web source that provides an "Embed Code" so that the content can easily be placed within the PDF. This embeded content could be videos, audio, playlist systems, ads, etc.. "anything with embed codes."
3. You would be able to select an area of the PDF for the placement, paste the code and then be able to resize the content window. i.e. for YouTube Files.
The Market for this is as follows:
- Web Based Magazines, or Flash Magazines that were created with Indesign, Acrobat then Flash. They can easily then create interactive content, with ads and multimedia. Anyone cab be interactive publisher then, no need for Flash Programming Skills.
- Educational Institutions that want to create lesson materials with Web Content.
- Business's that wish to share media elements from the web within PDF presentations.
If you need examples of how this might be used please contact me to discuss it further.
Thanks for your assistance.
Regards,
Robert
Robert Stewart
creativemind
New York

Since I only found the plug in yesterday I've only played with it a little bit.
First thoughts:
It works. It's easy to set up. I followed the instructions and I had a link working to our promotional video on youtube in only a couple of minutes.
Things I found:
I am using layers extensively in my pdf and wanted the plug in window to show up on only one layer. However as I mentioned before it doesn't do that so my workaround was to change the settings in the video to play in a floating window. However the plugin window is still visible if you do this, so my workaround was to reduce it to essentially a dot on the page and hide it on something pale grey! I created a button in InDesign and used that to fire the video.
Security stuff:
Obviously the pop up windows are somewhat frustrating but I see no way to get around them without doing what Joel suggested in his other blogs, which given the amount of users receiving my pdf and their varying competence levels with computers is not really an option. My workaround for that was to include a note explaining what to expect and do when they did show up.
For the future:
See if Adobe would make this an option in InDesign and usable within it's layers section. That would be awesome. I haven't had a chance to check out the addin Joel mentioned that might help with this in Acrobat. Have you?
Thanks for the other tips on embeding html etc - always good to find new ways get around problems.
Grahame

Looking for a Programmer to Create An Acrobat Pro "Embed" Plug In

Hello everyone,
I am Looking for a Programmer to Create An Acrobat Pro "Embed" Plug In.
The purpose of this is to be able to easily embed YouTube Video's within Acrobat documents so that It can stream the content into the PDF file.
Many have suggested to download the content and embed it, but doing so will violate the user agreement with YouTube plus it would increase the size of the PDF file considerably.
If there are any Programmers out there that would be interested in taking this project on please let me know. I believe there is a real need for this tool which people would really like to have.
The programming goals for the project would be as follows:
1. Take the Free YouTube API and create a plug in for Acrobat that would allow you to easily embed content into any PDF. The content must be PC & Mac Playable within the Latest Version Reader.*
2. The "Embed Plug-In" Would essentially allow you to just copy and past the embed codes from YouTube, Hulu, or any other web source that provides an "Embed Code" so that the content can easily be placed within the PDF. This embeded content could be videos, audio, playlist systems, ads, etc.. "anything with embed codes."
3. You would be able to select an area of the PDF for the placement, paste the code and then be able see a preview of the content, then be able to resize the content window. if it resizable like YouTube Files.
4. You need to be able to "Add" to the defined the "Trusted Source" from the Emebed Code information so that it does not require every instance of the content loading to require the user to select "Allow" each time it loads.
The Market for this is as follows:
- Web Based Magazine Creation, that turn into Flash Magazines that were created with Indesign, Acrobat then Flash. This process would easily allow anyone to create interactive content, with ads and multimedia. Anyone cab be interactive publisher with no need for Flash Programming Skills which is currently what is needed to achieve much of this process.
- Educational Institutions that want to create lesson materials with Web Content.
- Business's that wish to share media elements from the web within PDF presentations and Business Materials, such as training materials, Marketing Research, etc..
If you need examples of how this might be used please contact me to discuss it further.
I have a project that I am working on that needs this type of functionality and the deadline is approaching so I am seeking any and all help I can find to reach my goal. This Plug could also be a plug in to Indesign as well. Whatever it will take to reach the desired goal.
Thanks for your assistance.
Regards,
Robert
Robert Stewart
creativemind
New York

I think this is what you need.
http://blogs.adobe.com/pdfdevjunkie/the_youtube_widget_for_acrobat.html
Hope it helps.

Multiple Openings for InDesign Plug-in developers

Hello InDesign Plug-in Developers
We have got multiple openings for InDesign plug-in developers in our company. Excellent package, work environment and perks assured.
Details
=======
Location: Noida, India
Years of Experience required: 2-5 years
Job Requirements: The candidate must possess strong knowledge on Adobe InDesign SDK and scripting model, with ability to work with external APIs. He must have strong Object oriented concepts.
Contact: [email protected]
Please send your updated resumes to [email protected]
cheers
~Shaurya

Hi
List of available languages you can find in InDesign tech specs
http://www.adobe.com/uk/products/indesign/tech-specs.edu.html
or in SDK, reading PMLocaleIds.h header.
Regards
Bartek

No InBooklet SE features for InDesign CS3, is there a 3rd party plug-in ???

I am searching for a plug-in for Mac that will supply all/most of the capabilities of InDesign's CS2 InBooklet SE for InDesign CS3. Realizing that Print Booklet was not designed to offer the same services as it's CS2 predecessor, I am hoping that a 3rd party will step up to the plate to fill the gap.
Features such as manually altering the pagination by deleting or inserting blank pages and generating a new InDesign document in printer spreads (rather than just a PDF, as in CS3) are vital to my Design department.
Any suggestions would be appreciated. Thanks all!

InBooklet was VERY limited in it's ability to PROPERLY create new files.
That ability would have gotten even worse had those limitations
continued into CS3.
Imposition is the job of the printer, not the designer. And if you are
the printer there's really no need to be imposing InDesign files.
Follow Richard's advice and impose PDFs...it's far safer since you don't
have to worry about shadows moving or number lists getting totally mangled.
You might want to have a look at Quite Imposing since I wouldn't really
want to depend on anything owned by Quark.
Bob

InDesign programmer required as contractor

Hi,
We are starting an interesting project where we will be using InDesign Server connecting to a Web client. So we are looking for a programmer with expertise in InDesign programming.
Location: Anywhere in Europe, remote is acceptable.
Years of Experience: 2 - 5 years
Strong knowledge on Adobe InDesign SDK and scripting model.
Able to work with external APIs.
Strong Object oriented concepts.
Email: Please use this e-mail address for [email protected] holman DOT romero AT yahoo DOT com
Thanks !

So long as you are UK based then that is fine.

Any DBA job for 11 months Exp in india

Dear All,
Are there any DBA job for 11 months Exp in india. Cities like Pune,Mumbai, Bangalore, Delhi, Gurgaon, Noida. If all u ppl have any requirements in ur company plz do inform me. I am also an OCA 9i ie SQL, PL/SQL Developer , but i have been working on DBA 10g for past 9 months. I have also taken a professional training from SQL*International. Plz do reply
Regards

Hi all
I am also looking for Oracle DBA job in india. I am 4 years Exp As oracle DBA 8i,9i. I have taken training for 9i also.now working in Saudi arabia. I would like to work in india.
Any body reply me
Bye
Best Regards

Job for httpd.service failed. See 'systemctl status httpd.service' and

Hello,
I am the problem. I change "/etc/httpd/conf/httpd.conf" to install php5 on apache.
sudo systemctl start httpd
Job for httpd.service failed. See 'systemctl status httpd.service' and 'journalctl -xn' for details.
systemctl status httpd.service
● httpd.service - Apache Web Server
Loaded: loaded (/usr/lib/systemd/system/httpd.service; enabled)
Active: failed (Result: exit-code) since lun. 2014-08-25 12:19:31 CEST; 1min 18s ago
Process: 2208 ExecStop=/usr/bin/apachectl graceful-stop (code=exited, status=1/FAILURE)
Process: 2433 ExecStart=/usr/bin/apachectl start (code=exited, status=1/FAILURE)
Main PID: 2060 (code=exited, status=0/SUCCESS)
août 25 12:19:31 creaprog apachectl[2433]: httpd: Syntax error on line 66 o...y
août 25 12:19:31 creaprog systemd[1]: httpd.service: control process exite...=1
août 25 12:19:31 creaprog systemd[1]: Failed to start Apache Web Server.
août 25 12:19:31 creaprog systemd[1]: Unit httpd.service entered failed state.
Hint: Some lines were ellipsized, use -l to show in full.
cat /etc/httpd/conf/httpd.conf
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/access_log"
# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log"
# will be interpreted as '/logs/access_log'.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to specify a local disk on the
# Mutex directive, if file-based mutexes are used. If you wish to share the
# same ServerRoot for multiple httpd daemons, you will need to change at
# least PidFile.
ServerRoot "/srv/http"
# Mutex: Allows you to set the mutex mechanism and mutex file directory
# for individual mutexes, or change the global defaults
# Uncomment and change the directory if mutexes are file-based and the default
# mutex file directory is not on a local disk or is not appropriate for some
# other reason.
# Mutex default:/run/httpd
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_socache_module modules/mod_authn_socache.so
LoadModule authn_core_module modules/mod_authn_core.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
#LoadModule authz_dbd_module modules/mod_authz_dbd.so
LoadModule authz_core_module modules/mod_authz_core.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule access_compat_module modules/mod_access_compat.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_form_module modules/mod_auth_form.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule allowmethods_module modules/mod_allowmethods.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule cache_disk_module modules/mod_cache_disk.so
#LoadModule cache_socache_module modules/mod_cache_socache.so
#LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
#LoadModule socache_dbm_module modules/mod_socache_dbm.so
#LoadModule socache_memcache_module modules/mod_socache_memcache.so
#LoadModule watchdog_module modules/mod_watchdog.so
#LoadModule macro_module modules/mod_macro.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule dumpio_module modules/mod_dumpio.so
#LoadModule echo_module modules/mod_echo.so
#LoadModule buffer_module modules/mod_buffer.so
#LoadModule data_module modules/mod_data.so
#LoadModule ratelimit_module modules/mod_ratelimit.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule request_module modules/mod_request.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
#LoadModule reflector_module modules/mod_reflector.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule sed_module modules/mod_sed.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule deflate_module modules/mod_deflate.so
#LoadModule xml2enc_module modules/mod_xml2enc.so
#LoadModule proxy_html_module modules/mod_proxy_html.so
LoadModule mime_module modules/mod_mime.so
#LoadModule ldap_module modules/mod_ldap.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_debug_module modules/mod_log_debug.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule logio_module modules/mod_logio.so
#LoadModule lua_module modules/mod_lua.so
LoadModule env_module modules/mod_env.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
#LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
#LoadModule remoteip_module modules/mod_remoteip.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
#LoadModule proxy_fdpass_module modules/mod_proxy_fdpass.so
LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule proxy_express_module modules/mod_proxy_express.so
#LoadModule session_module modules/mod_session.so
#LoadModule session_cookie_module modules/mod_session_cookie.so
#LoadModule session_crypto_module modules/mod_session_crypto.so
#LoadModule session_dbd_module modules/mod_session_dbd.so
LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
#LoadModule slotmem_plain_module modules/mod_slotmem_plain.so
#LoadModule ssl_module modules/mod_ssl.so
#LoadModule dialup_module modules/mod_dialup.so
LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
LoadModule mpm_event_module modules/mod_mpm_event.so
LoadModule unixd_module modules/mod_unixd.so
#LoadModule heartbeat_module modules/mod_heartbeat.so
#LoadModule heartmonitor_module modules/mod_heartmonitor.so
#LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule asis_module modules/mod_asis.so
#LoadModule info_module modules/mod_info.so
#LoadModule suexec_module modules/mod_suexec.so
#LoadModule cgid_module modules/mod_cgid.so
#LoadModule cgi_module modules/mod_cgi.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
#LoadModule imagemap_module modules/mod_imagemap.so
#LoadModule actions_module modules/mod_actions.so
#LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
#LoadModule rewrite_module modules/mod_rewrite.so
#Load php5 module
LoadModule php5_module modules/libphp5.so
<IfModule unixd_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User http
Group http
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName www.example.com:80
# Deny access to the entirety of your server's filesystem. You must
# explicitly permit access to web content directories in other
# <Directory> blocks below.
<Directory />
AllowOverride none
Require all denied
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/srv/http"
<Directory "/srv/http">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.4/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# AllowOverride FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Require all granted
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<Files ".ht*">
Require all denied
</Files>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "/var/log/httpd/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog "/var/log/httpd/access_log" common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "/var/log/httpd/access_log" combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock cgisock
</IfModule>
# "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/srv/http/cgi-bin">
AllowOverride None
Options None
Require all granted
</Directory>
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values 'default', 'none' or 'unlimited'.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall may be used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
# Defaults: EnableMMAP On, EnableSendfile Off
#EnableMMAP off
#EnableSendfile on
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
Include conf/extra/httpd-mpm.conf
# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include conf/extra/httpd-autoindex.conf
# Language settings
Include conf/extra/httpd-languages.conf
# User home directories
Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
Include conf/extra/httpd-default.conf
# PHP settings
Include conf/extra/php5_module.conf
# Configure mod_proxy_html to understand HTML4/XHTML1
<IfModule proxy_html_module>
Include conf/extra/proxy-html.conf
</IfModule>
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
# uncomment out the below to deal with user agents that deliberately
# violate open standards by misusing DNT (DNT *must* be a specific
# end-user choice)
#<IfModule setenvif_module>
#BrowserMatch "MSIE 10.0;" bad_DNT
#</IfModule>
#<IfModule headers_module>
#RequestHeader unset DNT env=bad_DNT
#</IfModule>
Thanks, sorry my english is bad .
Last edited by Creaprog (2014-08-25 10:25:17)

I just noticed the exact same thing. It turns out that the httpd-ssl.conf file on my system is still the old v2.2 syntax, which means that the SSLMutex directive is still in there. This is an invalid directive after 2.2.
This is where things get interesting. At first, I simply thought I had forgotten to merge httpd-ssl.conf.pacnew after apache had been upgraded to 2.4. However, when I check my pacman.log, it appears that httpd-ssl.conf was never upgraded when apache went to 2.4 - (2.2.26-1 -> 2.4.7-1). There was never a pacnew file generated to be merged.
I took a look at the apache package via the abs and the "proper" httpd-ssl.conf is certainly in there, so why pacman never created a pacnew file is a mystery.
Anyway, to fix this: pull the httpd-ssl.conf from the apache package, either from your cache, using the abs and building it, or (I think) pacman may re-install it if you move the file to a backup location (not sure about this). Then merge your original httpd-ssl-conf with the new one.

When trying to update my CC apps, the update fails. I get this error: Update Failed. There was an error installing this update. Please try again later or connect customer support. This is currently happening for InDesign, Photoshop and Bridge. I had this

When trying to update my CC apps, the update fails. I get this error: Update Failed. There was an error installing this update. Please try again later or connect customer support. This is currently happening for InDesign, Photoshop and Bridge. I had this problem previous and was able to fix by doing a complete wipe of my computer and reinstalling CC. However, I should not have to wipe my computer clean everytime I need to do a CC update. HELP!

Hi,
Please download the updates directly from the link below:
WIN: All Adobe CC 2014 Updates: The Direct Download Links for Windows | ProDesignTools
MAC: All Adobe CC 2014 Updates: The Direct Download Links for Mac OS | ProDesignTools
Regards,
Sheena

I am trying to install a trail for InDesign CC to finish a project soon. I downloaded Creative Cloud, the app is in my folder, but it won't open and when I try to download InDesign an error pops up saying Adobe is trying to install malware.

I just installed Creative Cloud in order to download a trial for InDesign. I have the app icon for CC, but it won't open. When it was in my toolbar (on a mac) it just sat there loading for about 15 minutes. I tried restarting it but it won't open at all now. I also tried downloading an InDesign trail and it won't open at all. When I click for it to download an error message pops up saying Adobe is trying to instal malware and asks me if I want to continue. When I say yes, it doesn't do anything. I have a brochure that needs to go to the client by 4pm today! EEK!

Sydneybling it does sound like your security software is interfering with the process of installing and utilizing your Adobe Creative applications. I would recommend that you try temporarily disabling your security software and utilizing the directions listed at Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html to install InDesign CC.

Is there a way to save print job for later?

Is there a way to have print jobs saved for a later date/time? The only solution I can think of is to save the document/web page/file to a folder (e.g., "print later"). However, I'd rather just be able to hit print and in the print dialogue "send" the job to a print queue that I can open later.
For the curious, there are two often reoccuring situations where I want to save a print job for later: 1) I work late at night when my family is asleep and my house is not large enough to avoid disturbing their sleep by printing; and 2) I need to print out a 50+ page work document and I don't want to use my home computer to do it.
I'll appreciate whatever tips, recommendations, thoughts I get.

the method mentioned by benwiggy will certainly work. If you want to an option that would give you more options, you could use a PDF Service. You could then put a specific job on hold while still allowing others to use the printer.
You can do this by opening AppleScript Editor (/Applications/Utilities). You can copy and paste the following into an editor window --
on open printJobs
tell application "Finder"
set trapFile to quoted form of POSIX path of (printJobs as string)
end tell
set defaultPrinter to do shell script "lpstat -d | awk -F: '{print $2}'"
do shell script "lpr -P" & defaultPrinter & " -q " & trapFile
end open
Save the file as an Application. You can name it something like Hold Print Job. Then just put it in the PDF Services directory in the Library directory of your Home folder <yourname>/Library/PDF Services. You may need to make the PDF Services directory as it may not already be there.
Once the file is in place, you can use it by using the PDF drop down menu at the bottom left of a print window. That will send the file to the printer and put it on hold. Others can still use the printer. You can then print your file whenever you want. Just open the print queue as mentioned by benwiggy. Highlight the job that is Paused. You will see a little curly icon at the very right (looks like a reload icon in a web browser). Just click that icon and the job will start printing.

BackGround Job for Transaction VF06

Hi Experts,
We are having problems with the background Job for transaction VF06. We run this job every day except weekends but this job runs and takes only 0 sec without creating Invoices.
Allthough running this transaction Manually creates Invoice with same variant.
Kindly help me on this.
Thanks and Regards,
Neha Kapoor

Hi,
I have the seen the Log it tells:
Date       Time     Message text                                                                 Message class Message no. Message type
29.06.2008 22:00:48 Job started                                                                       00           516          S
29.06.2008 22:00:48 Step 001 started (program RV60SBAT, variant SOIE AUTO BILL, user ID GGBATCH)      00           550          S
29.06.2008 22:00:48 Job finished                                                                      00           517          S
But Invoices are not getting created.
Thanks and Regards,
Neha Kapoor

Program works but background job for that program fails....

I have a requirement where I have to collect the details of the purchase order and put the details in XML file format and FTP the XML file to an external third party FTP Server.
To realize this I developed a report program which follows following logic.
1)     First I collected the PO details by calling the BAPI BAPI_PO_GETDETAIL1.
2)     Then using the following link "/people/r.eijpe/blog/2005/11/10/xml-dom-processing-in-abap-part-i--convert-an-abap-table-into-xml-file-using-sap-dom-approach
I converted these PO details to the XML file format that the third party people accept.
       In the code I used u201CCALL METHOD cl_gui_frontend_services=>gui_downloadu201D and in this process first the XML file is generated and is getting stored on my deskytop.
3)     Then I called HTTP_SCRAMBLE, FTP_CONNECT, FTP_COMMAND , FTP_DISCONNECT and RFC_CONNECTION_CLOSE.
This works perfectly well and each time I execute the report the file is getting FTPu2019ed to the third party FTP server.
Now I tried to schedule a batch job for this and the batch job fails with follwing errors
02/25/2009 15:08:47 Error in Control Framework
Message Class = FES
Message Number = 022
Message Type   = E
02/25/2009 15:08:47 Job cancelled after system exception ERROR_MESSAGE
Message Class = 00
Message Number = 564
Message Type   = A
Can some one tell me what is going wrong. My report works perfect in front end but fails if I try to schedule a background job for it in SM36.
Can you please tell me whatz going wrong with batch job? Any Help is highly appreciated.
Regards,
JEssica SAm

Robert...Thanks for the reply...
I am using follwing code
l_xml_size = l_ostream->get_num_written_raw( ).
    CALL METHOD cl_gui_frontend_services=>gui_download
      EXPORTING
        bin_filesize = l_xml_size
        filename     = FILEPATH
        filetype     = 'BIN'
      CHANGING
        data_tab     = l_xml_table
      EXCEPTIONS
        OTHERS       = 24.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
Now what changes should i make..where should i store my XML file then instead of my desktop?
and whih Function Module should i Use..

Can ABAP proxy to consume WSDL file be run as background job for every10min

Hi all,
I have a requirement where I need to build an interface which gatheru2019s the purchase order details and send to external third party software in their required format (as an XML file).
So I should be the first point of contact and should trigger the interface each time a purchase order is generated.
So I am thinking that I should develop a background job for every 10 minutes which will look for new purchase orders and gathers the information of the purchase orders and send them to external third party software in their required format.
I have gone through all the SAP forums and e-Learning but still I have confusion in regards to how is it possible technically? Can some one guide me with some information on the same.
I have a little bit of confusion and want to know few things.
1)     Should I create a web service or should I consume a web service?
2)     If I need to consume a web service, then can I write an ABAP proxy to be run in background fro evry 10 minutes? I mean can we run ABAP proxy as a batch job in the background?
3)     Is there a difference between consuming an XML file and WSDL File?
Any Help will be highly appreciated.
Regards,
Jessica.

There are two options (as I know) to generate XML file.
1. Use XML TRANSFORMATION to get the XML string based your TRANSFORMATION. You can input your data and get back the XML string. Download this string to a file
Test XML generation program is:
types: begin of ty_data,
       num   type i,
       end   of ty_data.
DATA: itab TYPE standard table of ty_Data,
      la_data like line of itab,
      xmlstr TYPE string.
DO 3 TIMES.
la_data-num = sy-index.
APPEND la_data TO itab.
ENDDO.
CALL TRANSFORMATION ztest_np1
SOURCE table = itab
RESULT XML xmlstr.
CALL FUNCTION 'DISPLAY_XML_STRING'
EXPORTING xml_string = xmlstr.
My ZTEST_NP1 transformation. To create a transformation, click on the transformation in the "CALL TRANSFORMATION ztest_np1" statement. Select Simple transformation type.
<?sap.transform simple?>
<tt:transform xmlns:tt="http://www.sap.com/transformation-templates">
<tt:root name="table"/>
<tt:template>
    <table>
      <tt:loop ref=".table">
        <item>
          <tt:value ref="NUM"/>
        </item>
      </tt:loop>
    </table>
</tt:template>
</tt:transform>
XML string is like:
<?xml version="1.0" encoding="utf-8" ?>
<table>
<item>1</item>
<item>2</item>
<item>3</item>
</table>
To use this option, you have to create a transformation and than use it to generate the XML string.
Check this SAP Help
http://help.sap.com/saphelp_nw04s/helpdata/en/e3/7d4719ca581441b6841f1054ff1326/frameset.htm
2. You can concatenate and create an XML string and download that string into a file.
Regards,
Naimesh Patel

Job for InDesign programmer in Bangalore

Similar Messages

Maybe you are looking for