Job for transaction PBA6

Hi,
I'm trying to create a job for transaction PBA6 (program RPAPRT02) but once I get the list of all the activities I should complete I don't know how to select them all and execute de program SAPMSSY0.
Any idea?
Thanks

Hi,
Did you try to make a Parallel Processing referred to RFC?
Maybe this link can help you.
[http://help.sap.com/saphelp_nw04/helpdata/en/22/0425c6488911d189490000e829fbbd/content.htm]

Similar Messages

BackGround Job for Transaction VF06

Hi Experts,
We are having problems with the background Job for transaction VF06. We run this job every day except weekends but this job runs and takes only 0 sec without creating Invoices.
Allthough running this transaction Manually creates Invoice with same variant.
Kindly help me on this.
Thanks and Regards,
Neha Kapoor

Hi,
I have the seen the Log it tells:
Date       Time     Message text                                                                 Message class Message no. Message type
29.06.2008 22:00:48 Job started                                                                       00           516          S
29.06.2008 22:00:48 Step 001 started (program RV60SBAT, variant SOIE AUTO BILL, user ID GGBATCH)      00           550          S
29.06.2008 22:00:48 Job finished                                                                      00           517          S
But Invoices are not getting created.
Thanks and Regards,
Neha Kapoor

How to schedule a job for transaction CG36, incl. variant?

Hi all,
When you enter transaction CG36, you need to select a User Exist (EHS_DXSDB). After that you need to define a file path.
I would like to schedule a job for transaction: CG36 > Define User Exit: EHS_DXSDB (Import Dok-X material Safety Data Sheets) > and define a path. With transaction SE93, I found program name: RC1RIMPS (program is allowed to be job scheduled), only I can't create a Variant (to define the user exit and file path, no selectionscreen), how to create a variant?
The following programs can't be scheduled either (as they are not of type 1 or J):
SAPLC131
SAPLC1EO
SAPLC3G
Thank you in advance!
Kind regards,
Roy Derks

Hello Roy
I am sorry. To my knowledge up to ECC 6.0 Enhancement Pack 4 there is no SAP EH&S process available there you can do what you are requesting. The "problem" is that you need to "answer" the user dialog. Therefore you can not generate/prepare a variant which could be processed as a job according to my knowledge.
Therefore in my opinion you have this option only: prepare a copy of the transaction (or only the report) using either "Z" or "Y (customer reports). Then you need to exclude some line in the code (which gives rise to the user dialog) and prepare some customer specific coding so that the resulting report can be used in such a way that a variant is possible, but you must make sure that the process later (the real upload process) is processed too in this "job" queue. IN any case: you need to check the log of the report and this must be done by an user. Therefore an automatic process does have some "risks"
The topic of import of reports is used in most cases during a set up of EH&S, because of mergers/acustions but not in the daily work with EH&S and there I believe that SAP does not support this demand.
With best regards
C.B.

How to create a batch job for transaction SM13 or SM37

How to create a batch job for transaction SM13 or SM37?
I want to create a batch job for t-code SM13/SM37, the jobs will send a email to my inbox when the errors occurred in SM13/SM37.
How to do this? thanks in advance.

Hi,
Check the link:
http://www.sdn.sap.com/irj/sdn/index?rid=/webcontent/uuid/30237989-0901-0010-70a4-944691eb5e52 [original link is broken]
Make sure the CCMS agent installation is in place as per the Monitoring setup guide.
Follow the link Central auto reactions for configuring alert mails.
Regards,
Srikishan

Pre-processing job for Transactions

Hi Archiving Forum,
In SAP help it is mentioned that pre-processing job is optional job. I am trying to run Write job for few of the transactions where the status is completed without pre-processing job.
But when i debugged the write program for - CRM_SERORD archiving object, the program internally checking the I1100 status for each Service ticket/ Order.
Here, all Service tickets were marked completed status on 24/03/2009.
Residency time for all transaction types is 1 day.
I am running the Write job for Service Ticket and Service order on 24/03/2009. - but job is not able to write the data into Archive files.
Should i wait for One day ( where it completes the Residency time) to run the Write job?
If i wait for one day, then the write program is internally checking the status I100 (Archival status). Is this status is updated by default in the CRM_JEST table after completing Residency period ?
Please need concrete answers.
Thanks in Advance,
Kishore

Hi Kishore,
Pre-processing job should be scheduled for archiving objects before runing write program because it will help in basic archivability check and makes the basement for write program.
Without executing pre-processing program write program will fails to archive data. For example: CO_ORDER, MM_EKKO, MM_EBAN and so on... in R/3 system.
Similarly in CRM system Pre-processing program will help
In check, the following database changes for CRM_SERORD:
1) The date of the archivability check is updated.
2) For the archivable data, the status is changed to 'Archivable'. Then the
data is no longer changeable.
3) For the archivable data, the system sends a deletion BDoc type with
message type 'A' (for archiving) via the CRM Middleware so that the other
components involved in mySAP CRM solutions are informed about an archiving
of the data in the CRM server. The system sends deletion BDoc types at this
time because the change to an unchangeable status is the status change
which is relevant from a business point of view.
In CRM 3.0 version
The check occurs in an archiving object-specific preprocessing program
entered for the archiving object in transaction AOBJ.
As of mySAP CRM5.0 it is controlled using transaction SARA check/delete
In your case:
Even after passing of 1 day of residence time service order or service ticket will not be archive since write program will not set the status for archive I1100. Preprocessing program calling functional module and setting the status as archivable (I1100) after all the pre-requisites are met and write program will archive those data.
The status in ST / SO will not be automatically changed after meeting residence time.
Please also read OSS note no 500551.
-Thanks,
Ajay
Edited by: Ajay Kumar on Mar 25, 2009 2:17 AM

Is there a possibility create background jobs for transaction SP01?

We are creating spool requests (status 'to be processed') for specific printers that are located in different time zones. We want to schedule print jobs by printer to make sure the prints come out at a time the user specifies to us. I am looking for a program with the possibility to make variants by printer that I can include in a job to be created via SM36.Looking forward to your suggestions!
kind regards
Angelique Heutinck

Hi,
Check this link It may help you.
https://forums.sdn.sap.com/click.jspa?searchID=4305151&messageID=2622788
Thanks.

How to create a background job for call transaction

hi gurus
can any one suggest me
how to create the background job for call transaction.
thank you
regards
kals.

Hi,
Refer
https://forums.sdn.sap.com/click.jspa?searchID=10926107&messageID=889652
Regards
Kiran Sure

Set a batch job for LP21 transaction

How to set up a batch job for LP21 transaction.

first you call LP21.
enter your selection criteria
click save button
give name and a description for the variant and save.
leave LP21
call SM36
enter a job name e.g. "MY Replenishment run"
click start conditons button
click date/time button
enter a date and a time when the job shall run
click button for periodic value
click daily
click save
click save
now your back at define job
click step button
enter a user that has the rights to run this job (maybe your own user id, maybe a functional user id)
enter the ABAP name e.g. RLLNACH1
enter the variant name of the variant you created earlier in LP21 (you can use F4 to find it)
enter language
SAVE
now you are in the step list overview.
you can leave this screen
back on the job definition just click the SAVE button
thats all

Job for httpd.service failed. See 'systemctl status httpd.service' and

Hello,
I am the problem. I change "/etc/httpd/conf/httpd.conf" to install php5 on apache.
sudo systemctl start httpd
Job for httpd.service failed. See 'systemctl status httpd.service' and 'journalctl -xn' for details.
systemctl status httpd.service
● httpd.service - Apache Web Server
Loaded: loaded (/usr/lib/systemd/system/httpd.service; enabled)
Active: failed (Result: exit-code) since lun. 2014-08-25 12:19:31 CEST; 1min 18s ago
Process: 2208 ExecStop=/usr/bin/apachectl graceful-stop (code=exited, status=1/FAILURE)
Process: 2433 ExecStart=/usr/bin/apachectl start (code=exited, status=1/FAILURE)
Main PID: 2060 (code=exited, status=0/SUCCESS)
août 25 12:19:31 creaprog apachectl[2433]: httpd: Syntax error on line 66 o...y
août 25 12:19:31 creaprog systemd[1]: httpd.service: control process exite...=1
août 25 12:19:31 creaprog systemd[1]: Failed to start Apache Web Server.
août 25 12:19:31 creaprog systemd[1]: Unit httpd.service entered failed state.
Hint: Some lines were ellipsized, use -l to show in full.
cat /etc/httpd/conf/httpd.conf
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/access_log"
# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log"
# will be interpreted as '/logs/access_log'.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to specify a local disk on the
# Mutex directive, if file-based mutexes are used. If you wish to share the
# same ServerRoot for multiple httpd daemons, you will need to change at
# least PidFile.
ServerRoot "/srv/http"
# Mutex: Allows you to set the mutex mechanism and mutex file directory
# for individual mutexes, or change the global defaults
# Uncomment and change the directory if mutexes are file-based and the default
# mutex file directory is not on a local disk or is not appropriate for some
# other reason.
# Mutex default:/run/httpd
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_socache_module modules/mod_authn_socache.so
LoadModule authn_core_module modules/mod_authn_core.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
#LoadModule authz_dbd_module modules/mod_authz_dbd.so
LoadModule authz_core_module modules/mod_authz_core.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule access_compat_module modules/mod_access_compat.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_form_module modules/mod_auth_form.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule allowmethods_module modules/mod_allowmethods.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule cache_disk_module modules/mod_cache_disk.so
#LoadModule cache_socache_module modules/mod_cache_socache.so
#LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
#LoadModule socache_dbm_module modules/mod_socache_dbm.so
#LoadModule socache_memcache_module modules/mod_socache_memcache.so
#LoadModule watchdog_module modules/mod_watchdog.so
#LoadModule macro_module modules/mod_macro.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule dumpio_module modules/mod_dumpio.so
#LoadModule echo_module modules/mod_echo.so
#LoadModule buffer_module modules/mod_buffer.so
#LoadModule data_module modules/mod_data.so
#LoadModule ratelimit_module modules/mod_ratelimit.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule request_module modules/mod_request.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
#LoadModule reflector_module modules/mod_reflector.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule sed_module modules/mod_sed.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule deflate_module modules/mod_deflate.so
#LoadModule xml2enc_module modules/mod_xml2enc.so
#LoadModule proxy_html_module modules/mod_proxy_html.so
LoadModule mime_module modules/mod_mime.so
#LoadModule ldap_module modules/mod_ldap.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_debug_module modules/mod_log_debug.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule logio_module modules/mod_logio.so
#LoadModule lua_module modules/mod_lua.so
LoadModule env_module modules/mod_env.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
#LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
#LoadModule remoteip_module modules/mod_remoteip.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
#LoadModule proxy_fdpass_module modules/mod_proxy_fdpass.so
LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule proxy_express_module modules/mod_proxy_express.so
#LoadModule session_module modules/mod_session.so
#LoadModule session_cookie_module modules/mod_session_cookie.so
#LoadModule session_crypto_module modules/mod_session_crypto.so
#LoadModule session_dbd_module modules/mod_session_dbd.so
LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
#LoadModule slotmem_plain_module modules/mod_slotmem_plain.so
#LoadModule ssl_module modules/mod_ssl.so
#LoadModule dialup_module modules/mod_dialup.so
LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
LoadModule mpm_event_module modules/mod_mpm_event.so
LoadModule unixd_module modules/mod_unixd.so
#LoadModule heartbeat_module modules/mod_heartbeat.so
#LoadModule heartmonitor_module modules/mod_heartmonitor.so
#LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule asis_module modules/mod_asis.so
#LoadModule info_module modules/mod_info.so
#LoadModule suexec_module modules/mod_suexec.so
#LoadModule cgid_module modules/mod_cgid.so
#LoadModule cgi_module modules/mod_cgi.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
#LoadModule imagemap_module modules/mod_imagemap.so
#LoadModule actions_module modules/mod_actions.so
#LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
#LoadModule rewrite_module modules/mod_rewrite.so
#Load php5 module
LoadModule php5_module modules/libphp5.so
<IfModule unixd_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User http
Group http
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName www.example.com:80
# Deny access to the entirety of your server's filesystem. You must
# explicitly permit access to web content directories in other
# <Directory> blocks below.
<Directory />
AllowOverride none
Require all denied
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/srv/http"
<Directory "/srv/http">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.4/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# AllowOverride FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Require all granted
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<Files ".ht*">
Require all denied
</Files>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "/var/log/httpd/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog "/var/log/httpd/access_log" common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "/var/log/httpd/access_log" combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock cgisock
</IfModule>
# "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/srv/http/cgi-bin">
AllowOverride None
Options None
Require all granted
</Directory>
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values 'default', 'none' or 'unlimited'.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall may be used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
# Defaults: EnableMMAP On, EnableSendfile Off
#EnableMMAP off
#EnableSendfile on
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
Include conf/extra/httpd-mpm.conf
# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include conf/extra/httpd-autoindex.conf
# Language settings
Include conf/extra/httpd-languages.conf
# User home directories
Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
Include conf/extra/httpd-default.conf
# PHP settings
Include conf/extra/php5_module.conf
# Configure mod_proxy_html to understand HTML4/XHTML1
<IfModule proxy_html_module>
Include conf/extra/proxy-html.conf
</IfModule>
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
# uncomment out the below to deal with user agents that deliberately
# violate open standards by misusing DNT (DNT *must* be a specific
# end-user choice)
#<IfModule setenvif_module>
#BrowserMatch "MSIE 10.0;" bad_DNT
#</IfModule>
#<IfModule headers_module>
#RequestHeader unset DNT env=bad_DNT
#</IfModule>
Thanks, sorry my english is bad .
Last edited by Creaprog (2014-08-25 10:25:17)

I just noticed the exact same thing. It turns out that the httpd-ssl.conf file on my system is still the old v2.2 syntax, which means that the SSLMutex directive is still in there. This is an invalid directive after 2.2.
This is where things get interesting. At first, I simply thought I had forgotten to merge httpd-ssl.conf.pacnew after apache had been upgraded to 2.4. However, when I check my pacman.log, it appears that httpd-ssl.conf was never upgraded when apache went to 2.4 - (2.2.26-1 -> 2.4.7-1). There was never a pacnew file generated to be merged.
I took a look at the apache package via the abs and the "proper" httpd-ssl.conf is certainly in there, so why pacman never created a pacnew file is a mystery.
Anyway, to fix this: pull the httpd-ssl.conf from the apache package, either from your cache, using the abs and building it, or (I think) pacman may re-install it if you move the file to a backup location (not sure about this). Then merge your original httpd-ssl-conf with the new one.

Problem in creating Batch job for programs in different servers.

Hi All,
I have a requirement like i have 2 different programs ( PRG1,PRG2 ) running in 3 different SAP servers (SER1,SER2,SER3).
I want to create a batch job for the programs.
Here When I run the PRG1 in Server SER1,it will create a file1 in SER1 as well as the other 2 servers (SER2 and SER3).
It just create a file and there is no content in the file.Once i start writing records to file1in SER1,the same record will be started writing in SER2 and SER3.This is using PRG1.
Once PRG1 will complete writing records in file,Next PRG2 will run in SER2 using file created by PRG1.
I want to create a batch job for PRG1.
How to trigger the PRG2 after completing job1 for PRG1 without any manual interaction.
Please help me for this.

Hi Ambili
You can set steps in these jobs in transaction SM36.
You can define that Job 2 starts after Job1 complete sucessfully and same game for other jobs.
Please, check attachment for detailed information about that
Kind regards
Edited by: Carlos Machado on May 27, 2010 6:01 PM

Schedule Background job using transaction CATM

Hi all,
Since we cannot schedule a background job using transaction CATM, I have created a program calling the CATM transaction through batch-input.
I have done a recording and entered the coding in a Z-program. For a vendor, I have recorded time in CAT2 for multiple purchase orders.
After entering the vendor number in CATM, all the purchase orders showed up. I have clicked 'select all' and posted.
When I run the program in the background, it posts only for one purchase order.
When I run the program in the foreground, using the Select All-button it only proceeds with the first line in my list of PO's.
How to read the whole stack and post the whole stack of purchase orders?
Please help me out with this.
Thanks
Regards
Srinivasan Desingh
408 368 3837

Hi,
When I run the program in the background, it posts only for one purchase order.
When I run the program in the foreground, using the Select All-button it only proceeds with the first line in my list of PO's.
See..it's a Z-program so Its difficult to answer without checking the program. But I think, you should check your BDC again from Debugging, with the help of your abaper. You will find, why its is processing only one entry.
Regards
Shishir

Invoice List Job for F2 Only. Exclude other Billing types, e.g. L2,

Hi:     We have just set up a job for invoice list. Everything seems to ran alright until customer service created a debit memo (L2) for that customer and the debit memo got consolidated with the rest of the F2. I understand that L2 will be consolidated because the invoice list type set in the billing document setting is LR.
I later found that we do have a long list of billing docs that is set to LR as the invoice list type. (Please see below)
The requirement that I've got from the user is that they only want F2 invoice consolidated in the invoice list. What would be the best advise to do this?
Can anyone please advise?
Thanks!
F1     Invoice
F2     Invoice
FAS     Canc.down pymnt req.
FAZ     Down payment request
L2     Debit Memo
FP     Billing POS-Interfce
FR     Invoice Repair
FV     Invoice Contract
FX     Billing Ext Transact
G2S     Cred. memo 3rd party
HR     Billing Training Adm
IGS     Cancel ICM
IV     Intercompany Billing
IVA     IB order-related
S1     Cancellation of Inv
S3     Cancellation of Inv
SHR     Cancel Training Adm
WIA     Plants Abroad
ZF2     Drop Ship US Cust
ZIV     Interco. Invoice
ZL2     I/C Debit Memo
ZML2     Misc Debit Memo
ZSF2     Samples Invoice

We need to know what this "Job" is using for the invoice list. Is it T-Code VF05, VF04, etc?
Either of these you could create a variant for the job to only include specific Document Type(s) ala F2

Why the background job for downloading file failed?

I have a background job for downloading file with logical path.
with
'OPEN DATASET l_out_file FOR OUTPUT IN TEXT MODE ENCODING DEFAULT';
Now, the program can be run in foreground;but when it running on background, it shows 'open file error'.
I do not know what happen?
Please help ~~

Hi,
The logical path you have provided might be incorrect or you might not have the necessary authorization to read/write on that folder.
Please check the folder in transaction AL11 & check whether you have the authorization to read/write. BASIS consultant would be able to tell you about it.
Best regards,
Prashant

Define back ground job for Maintenance Order Settlement through KO8G

Hi Experts,
I need to define back ground job for Maintenance Order Settlement through KO8G transaction code.
Here are the requirements
1. The job should run on weekly basis automatically.
2. The settlement period and posting period should be taken care by the job dynamically. i.e. if the job runs in July, the job should pick up Settlement period and posting period as 7 automatically.
Kindly let me know the steps to define the back ground job as per above requirement.
Sanjeev

To run the KO8G each week, the a RECURRING job has to be created. At my job, Basis/Ops department would create and schedule the job.
To have the posting periods, dates etc dynamically determined at the time the job runs:
Create the variant and save.
In 5.0, KO8G does not save a variant, therefore, go to SE38 and create a variant for program: RKO7KO8G
When you go to the ATTRIBUTES screen, to add a name and description, you will see a list of all the fields that are part of the selection criteria.
For an example, I frequently use the Posting Date. To the right of the screen is a field called Selection Variable, click on the drop box and select D - Dynamic Date Calculation.
Go to field NAme of variable, click on drop box and select the variable you want.
Each field has its own list of selection variable and name of variable depending on how it works in the progra.
If you look at Posting period you will see:
T: Table Variable from TVARVC
B: User-defined variables
I do not know about User defined variables, but for TVARC there is thread that leads to a "how to" blog
[How create a variable in the TVARVC that calculate the last week]
do some more searching and you should find more answers
Good luck
Althea

Cancel the scheduled jobs for process chains - urgent

Hi,
How do I cancel the scheduled jobs for process chains which are going to run tonight.
thanks,
Radha

Hello,
Go into transaction code RSPC and then select the particular process chain by going into the edit mode and in the menu...
Look for Execution --> Remove from Schedule.
Let me know if that answered your question.
Thanks
Dharma.

Job for transaction PBA6

Similar Messages

Maybe you are looking for