Job getting deleted

Dear all,
Some of my scheduled jobs are getting deleted for the scheduled job list . How can i find out how it is getting deleted and is there any setting so that the user who scheduled the job only can delete the job??..
Regards
Sandy.

Hi
you can see this here SE16---->Table name
<b>TBTCO</b> and <b>TBTCP</b>
Then you found all information
Reward points if helpful
Thanks
Pankaj Kumar

Similar Messages

Past due PurRqs are getting deleted in APO but not getting deletd in R3

Hi folks,
We have a daily job, which runs at 18:00 hrs in the evening everyday in the APO Production System.The job is to delete all past due Purchase Requisitions for last 2 years (job & variant details are mentioned below) All the past due PurRqs are getting deleted from APO, which we have cross-cheked in RRP3 view many times.
However the same is not getting deleted in R3 systems. The planner/end- user is getting confused & hassled by this list of old PurRqs which is visible in R3 through MD04 t-code.
Please suggest remedial/corrective actions to get this issue sorted.
The job details for the deletion of past purchase requisitions.
The job is run with the following variant details:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ABAP Program name :/SAPAPO/RLCDELETE
VARIANT Details
Select Object-> By Categories ->Category = AG (PurRqs in R3)
Manual Selection-> Version =000; Product = (blank); Location = List ofall locations;
Fixed Order (ticked)
Period = 14.03.2009 to 14.03.2011 {All PurRqs in these period shouldget deleted in APO as well as R3}
Settings-> Delete Transaction Data ->In R3 & APO (ticked)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Past due PurRqs are not getting deleted in R3 systems. The planner/end-user is getting confused & hassled resulting in loss of productive time & generation of erroneous planning which is negatively impacting Business.
Pls suggest some remedy for this.
MMTIA
Kumar
Edited by: Blue Lotus on Mar 14, 2011 5:51 PM

Do you run the CCR on a daily basis. If so do you see the "reqs missing in R/3" in the CCR ?
Also what is your transfer setting ? Meaning the transfer from APO to R/3 configuration - is it immediate or change pointer based ? check that also
Thanks
Aparna

Data in BBP_DOCUMENT_TAB are not getting deleted

Hi All,
We are in SRM 4.0.
Since today morning whenever a user trying to create / change shopping cart, PO, GR it got updated in the BBP_DOCUMENT_TAB. But it is not getting deleted automatically. Earlier it used to get deleted automatically once the documents have been ordered.
But I could see the POs and GRs have been transfered to the back end system.
Job CLEAN_REQREQ_UP is running every 2 mts.
Please advise.

Hi Arun,
note 338985 describes in detail how the the status of the document(s), CLEAN_REQREQ_UP and the IDOCs interact.
If the documents are posted without any error i.e. there´s everything perfect but the 'obsolete' entries in BBP_DOCUMENT_TAB, then this sounds like a malfunction.
Maybe you should debug the the cleaner with one document and see whats happening starting at the following spot:
CLEAN_REQREQ_UP
process selected entries: check existence of follow on documents,
update if necessary local documents etc. (depends on entry type)
        LOOP AT selarea.
          IF still_to_proc = c_proc_block_size.
            SET UPDATE TASK LOCAL.
          ENDIF.
lateron the entries are deleted in function module BBP_DELETE_FROM_DOCUMENT_TAB
Note 535765 describes how to delete entries via a Z* report but I would NOT RECOMMEND to do that without having checked the situation by SAP before.
see note 535765:
Please note!:
Deleting relevant entries from the BBP_DOCUMENT_TAB may cause severe
problems, as the system needs the entries to set the right status to
shopping carts, invoices and confirmations. So please be careful with
the deletion of entries.
Kind Regards
Michael

SAP Back ground Jobs getting cancel automatically

Hi All,
All schedule Background jobs getting cancel automatically in ECC 5 server. Also not getting any job log in respective schedule job. please help me out with expert suggestions.
Regards
Gyan

1)Are the bgd workprocess free in the system currently?Check if there are any long running jobs holding them.
Bgd Work process are free but with error code 373,223,007 etc for all 5 bg wp
error reports from work directory as per work process:---
wp 22 :Fri Sep 25 15:07:04 2009
A
A ABAP/4 Program SAPLSYDB                                .
A Source LSYDBU27                                 Line 7.
A Error Code DBIF_DSQL2_DEFAULT_CR_ERROR.
A Module $Id: //bas/640_REL/src/krn/runt/abexsql.c#5 $ SAP.
A Function DsqlErrorHandler Line 1986.
A COMMIT/ROLLBACK error on "DEFAULT" database connection..
A
M ***LOG R68=> ThIRollBack, roll back () [thxxhead.c   12289]
C Rollback Work (0)
M *** ERROR => ThCallHooks: event handler rsts_before_commit for event BEFORE_COMMIT failed [thxxtool3.c 252]
B ComRolHook(BEFORE_COMMIT, free_all) failed
B db_con_commit received an error return code in before-commit action
M ***LOG R38=> ThICommit3, db_commit98 ( 001024) [thxxhead.c   12036]
WP23: Fri Sep 25 15:06:05 2009
B dbtran INFO (init_connection '<DEFAULT>' [MSSQL:640.00]):
B   max_blocking_factor = 50, max_in_blocking_factor      = 255,
B   min_blocking_factor =   5, min_in_blocking_factor      = 10,
B   prefer_union_all    =   1, prefer_union_for_select_all =   0,
B   prefer_fix_blocking =   0, prefer_in_itab_opt          =   0,
B   convert AVG         =   1, alias table FUPD            =   0,
B   escape_as_literal   =   0, opt GE LE to BETWEEN        =   0,
B   select *            =0x00, character encoding          = STD / []:X,
B   use_hints           = abap->1, dbif->0x1, upto->0, rule_in->0,
B                         rule_fae->0, concat_fae->0, concat_fae_or->0
M ***LOG R68=> ThIRollBack, roll back () [thxxhead.c   12289]
C Rollback Work (0)
M *** ERROR => ThCallHooks: event handler rsts_before_commit for event BEFORE_COMMIT failed [thxxtool3.c 252]
B ComRolHook(BEFORE_COMMIT, free_all) failed
B db_con_commit received an error return code in before-commit action
M ***LOG R38=> ThICommit3, db_commit98 ( 001024) [thxxhead.c   12036]
wp 24:Fri Sep 25 14:33:10 2009
M *** ERROR => ThCallHooks: event handler rsts_before_commit for event BEFORE_COMMIT failed [thxxtool3.c 252]
B ComRolHook(BEFORE_COMMIT, free_all) failed
B db_con_commit received an error return code in before-commit action
B ***LOG BZY=> unexpected return code 32768      calling DBACDS     [dbacds#2 @ 1225] [dbacds 1225 ]
B
*WP25: *** ERROR => BtcCleanUp: BtcLgAp-call failed (rc = 4) [btcjcntl.c   1308]*
M ThCallHooks: call hook >ITSP: EndOfSession< for event BEFORE_SESSION_CANCEL
M ThCallHooks: call hook >RtmClearSession< for event BEFORE_SESSION_CANCEL
M ThCallHooks: call hook >HttpClearSession< for event BEFORE_SESSION_CANCEL
M ThCallHooks: call hook >SpoolHandleHook< for event BEFORE_SESSION_CANCEL
M ***LOG R47=> ThResFree, delete (001009) [thxxmode.c   1284]
M ThCallHooks: call hook >ASTAT-collect commit handling< for event BEFORE_COMMIT
M ThCallHooks: call hook >rsts_before_commit< for event BEFORE_COMMIT
M ThCallHooks: call hook >rsts_after_commit< for event AFTER_COMMIT
M ThCallHooks: call hook >ThNoClearPrevErr< for event AFTER_COMMIT
M ThCallHooks: call hook >SpoolHandleHook< for event AFTER_COMMIT
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_TASK_SWITCH
M ThCallHooks: call hook >ImcResetPtr< for event BEFORE_TASK_SWITCH
M ThCallHooks: call hook >DbgBeforeTaskSwitch< for event BEFORE_TASK_SWITCH
M ThCallHooks: call hook >HttpResetPtr< for event BEFORE_TASK_SWITCH
B
B Fri Sep 25 14:47:04 2009
B Disconnected from connection con_da={R/3*WORKFLOWTRACE,26000006,1}
please let me know where i can send log file if req.
2)Check for the sm21/sm50 bgd wp traces.
Getting so may Tem se management errors.
Some TemSe objects are stored in files. To do this, a path name is set up from the TemSe object name. To be able to use this path, TemSe management requires a directory. It attempted to create it itself. However, this did not succeed.
3)Check if the filesystem is full as you suggest no logs are being written.
File system having free space
4)Check if the user who has scheduled the job is locked ?
user unlocked
please help me to resolv this issue.
thanks
Gyan
Edited by: Gyan Prakash on Oct 9, 2009 10:02 AM

Line item get deleted in PO & PR.

Hello,
We are facing issue in posting the goods receipt in MIGO,
since the line items in the Purchase Order is getting deleted automatically and
in turn Purchase Requisition Number is deleted.
What are the probable reason for thie?
we have checked everything but didnt find solution?
Thank you in advance
Regards,
Tina.

Tina
Can you used PM Module in your company.
When a Purchase Requisition (PR) is created from PM order using control key PM03 after approval of PR, Purchase Order (PO) is issued. After completion of maintenance job and acquiring services or material procured against PR which has been created from PM order, PM order is Technically completed. When order status is set as TECO, PR got deleted. This behavior of deletion of PR when order is TECO
This is standard behaviors in the PM/CS order As Of My Knowledge can you used PM Module in your company

Profile Imanges are not getting deleted from Profile Image library

Hi,
If I go mysite and edit my profile and set a profile images and save the changes. Image is uploaded to profile Image library in the root of the mysite.
I Edit my profile again and this time I remove the profile image and save the changes. Image is not getting deleted from the profile Image library.
as per my understanding it should get deleted. My site clean job is running. user profile is active in AD.
Thanks
Omkar

My first question would be is it a big deal if the picture doesnt get deleted from the libarary? My understanding is that the profile picture field is a URL link, the first time you add a picture it will provision 3 copies of differing sizes to the
library. When you "remove" the picture, it just empties out the picture URL field. Which is a nice hidden recovery if someone accidently deletes a profile photo they really wanted (Or if your company really locks down picutures so you only get
a choice of a couple avatars instead of a personal photo).
Similar issue:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/17bc8538-568f-4fff-8933-458fdba4b701/delete-user-profile-picture-in-sharepoint-2010-when-account-is-deactivated-or-deleted-from-ad?forum=sharepointadminprevious
and response:
Since the user photo library follows certain standards OOB:
http://iedaddy.com/2010/12/sharepoint-2010photo-management-for-social-mysites/
I would say just create a small script that will periodically read the UPS and make sure there are no photos sitting in the library not associated to an account... here's an example of accessing the User Profiles w/ Powershell:http://iedaddy.com/2010/06/sharepoint-2010-updating-user-profile-properties-with-powershell/
You would just modify it to delete image files whose name is not associated to an existing NTName in the UPS.
ieDaddy
Blog: http://iedaddy.com
Twit: @iedaddy

Condition Record PB00 gets deleted from A018 table

Hi Gurus-
Could anyone of you explain how the PB00 condition is getting deleted from A018 table (Purch Org Level Condition)? It looks like some batch job is randomly setting the Valid to Date A018-DATBI to yesterday's date and today there is no valid time dependent condition.
I don't know any process/program that accesses PB00 condition in table A018 other than MEK1 or MEK4.
Does SD condition type change has any impact in Purchasing Price (PB00). Although all the Rate/Price is stored in the same table KONP but separated by application area and table (A017, A018, A071, A073).
Can anybody shed some lights on this please?

Thanks for your reply. We know the user name who is making the change in A018. It is a batch user ID that makes the change but we have about 100 differentg background batch job that is scheduled everyday and I went through every one of them but did not raise any flag.
And the worst part is since it is done by the batch user id (batch job), there is no change record (if I try to do MEK3-Environment>display changes) not even an entry in CDHDR table or CDPOS table.
Trying to see if you guys know of any SD or MM program that accesses that table and set the valid to field to yesterdays date and create a new condition record (KNUMH) with valid to date 31.12.9999 and rate (value) to 0.00?
Please let me know if you have any suggestion.
Thanks in advance.

WorkItem getting deleted

Hi, I have created a workflow for PR release. Approver will get the PR in his SAP inbox, when he click on workitem, it will take him to ME54N, from where he can release the PR.
The problem I am facing is that, if approver dont perform any action in ME54N, simply come back by pressing the back button, without releasing it, the workItem is getting deleted from his inbox and workflow going to next step. My BO method that is associated with task responsible for that workitem is Dialog and Synchronous method.
I have also given one terminating event for this task, and raising this event at SAVE button of ME54N, so that pressing BACK button should not delete the Workitem.
Please suggest the possible cause of this problem. I want workitem only to get delete on SAVE button, not on Back Button.
If Approver is not releasing it and simply coming back the workitem should remain in his inbox, and workflow should not go to next step.

Hi,
You have to use Asynchronous method for requirements like these where you have standard SAP transactions doing the same job as your work item.
Change your method to synchronous. Also you can refer to WS000000038 workflow for reference as it does the same thing.
( Also do compare your terminating events ).
Regards
Gautam

Setup tables data not getting deleted for application 11

Dear Team,
Trying to delete data from setup tables after completing few fields enhancements
System triggering following error message and the data is not getting deleted
Step 001 started (program RMCSBWSETUPDELETE, variant &0000000000010, user ID 00938H744
Database problems with table MC11VA0ITMSETUP
Job cancelled after system exception ERROR_MESSAGE
Please guide
Thanks,
Sarasu

Try to adjust the database tables using SE14 transaction.
SE!4 --> Enter table name MC11VA0ITMSETUP -->Select radio button "tables" --> click on Edit -->Select processing type "Background" --> Click on "Activate and Adjust database".
Here before performing the Activate and Adjust database function -- first try to check the data base object (click on check button and select database object --ok) if every thing is ok then proceed with the above steps.
Next try to delete the setup tables and check.. hope this should work.
Try to check the logs in SM21 and also check if the data source is active or not before deleting the setup tables.
Regards
KP
Edited by: Konduru Prashanth. on Mar 2, 2012 6:08 PM

How to stop user profiles clean-up job from deleting Active users.

Hi,
Somehow bunch of active users profile are marked for deletions and their managers have received email saying it will be deleted in X days.
I know if we disable My Site Clean Up Job, it will not delete any profiles. But I want that job to continue running and stop active user profiles from getting deleted.
How do I proceed here...
Thanks,
Abhilash

Hi Abhilash,
I understand SharePoint 2010 MySite clean up timer job is deleting active user profiles.
Firstly, I need to confirm with you that the timer job will work on below two situations:
1.When you use the web UI in Central Administration to delete a user profile
2.When a user who was included in a previous user profile import is no longer included in the import.
The second point bears a little more explanation, please refer to How Is A User Profile Deleted?
in the article below:
http://blogs.msdn.com/b/kaevans/archive/2012/06/25/top-recommendations-for-managing-the-my-site-cleanup-timer-job.aspx
Let me know if you situation is not included in the above two.
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

How can I delete printed job list Delete jobs grayed

How can I delete printed job list Delete jobs grayed

Apple lets you see a list of what is printed out but there is no way to erase the list and mine is two years of all that printed out. I want to erase it but there is no place to get rid of the list or the items on it. Epson said it was an Apple problem. Apple doesn't seem to know the answer. You can only delete jobs when it is not grayed out and it is usually for those you have not printed . I am hoping someone can figure it out.

Job change/deleted log!

Hi,
Job scheduled was deleted (SAP 4.6c)
How to find out who deleted this scheduled job?
Is there a change log for jobs or table exists.
Thanks in advance,
AC.

I did not see any table when job has deleted status .
any how trace the FM BP_JOB_CHECKSTATE ,You may get good idea.
I guess it will not store any table
Thanks
Seshu

Oracle .trc files getting deleted as soon as it generates.

Hi,
Its a strange situation. Oracle .trc files are getting deleted as soon as it genetates. There is no cron job nor any background job is running .
Any idea what this could be?
Thanks,
kam

change the location of your trace files..1. Is it somewhere documented; if yes then please give link.?
2. Have you or your friend ever tried like that? If yes then please share your experience.

Job gets cancelled - Plan version cannot be planned for fiscal year

hello,
In R/3, I am trying to delete data using KEPM TCODEand the job gets cancelled with message "Plan version cannot be planned for fiscal year".
Does anyone know what I should do to resolve it.
thanks,
Bhat

Hello,
Thanks for your response.
I have checked OKEQ and
we have entries for fiscal year planning version and in operating concern the version is locked. I don't know if I should unlock the version and what will be the impact.
thanks,
Bhat

HT201269 I am trying to save memory on my iPhone 4S/ ios6. Can I back up all photos to icloud and the external hard disk I normally use for photos? If I then delete photos from the iPhone do the get deleted on iCloud?

I am trying to save memory on my iPhone 4S/ ios6.
1) Can I back up all photos to icloud and the external hard disk I normally use for photos? If I then delete photos from the iPhone do the get deleted on iCloud?
2) Can I back up the newsstand to iCloud and save memory on the iPhone?
3) Can I back up the bookshelf to icloud and save memory on the iPhone?

1. What format is the external drive? It sounds like it's ina format that Macs can't write to. Is it a NAS or NTFS?
2. Easiest thing: just move your iPhoto Library to the external
Make sure the drive is formatted Mac OS Extended (Journaled)
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
Regards
TD

Job getting deleted

Similar Messages

Maybe you are looking for