Job History stopped updating

I am running Oracle Management Server on Red Hat Enterprise 3. Everything has worked flawlessly for the last 9 months (the time at which I implemented it). Now out of nowhere, completed jobs stopped showing up in the job history tab in OEM. I have check the filesystems of my database servers (the jobs are daily RMAN backups) and the files are up to date. RMAN even reports the backups as being completed. But job history stopped updating on September 24th.
Has anyone ever seen this or have any suggestions?

Where is that setting? I do delete entries in the job history on a monthly basis.

Similar Messages

Can't print- 27" 2013 iMac-my epson stylus 3800 pro will not print-i updated driver n added printer in syst prefs-When i print the printer queue opens and shows the job as "stopped"-Supply level "information is not available"-maybe part of problem...thx

I can't print from my 27" late 2013 iMac. I am using an epson stylus 3800 pro. I updated driver and added printer in system preferences. When i print the printer queue opens and shows the job as "stopped". Supply level shows "information is not available which maybe part of problem...thank you

The first thing you could try is a reset of the printing system. Please note that this action will remove all printers and scanners from the Printers & Scanners preference pane.
With the reset complete, unplug the Epson USB cable from the Mac for a minute and then reconnect it. This action should result in the printer being added again to the Mac automatically. If this does happen, then see if you can print again.
If the printer is not added again automatically, open Printers & Scanners and click the plus button to add the Epson. Once this is done, then see if you can print again.

My history stopped on September 13 and it wont update

My history stopped on September 13 2013 and no matter what i have done (reloaded firefox and plugins) my history will not show anything beyond that date. How do i get my history to start working again?

Make sure that you do not run Firefox in (permanent) Private Browsing mode (Never Remember History).
*https://support.mozilla.org/kb/Private+Browsing
*Tools > Options > Privacy > Firefox will: "Use custom settings for history"
*Deselect: [ ] "Always use private browsing mode"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Problems with bookmarks and history not working properly can be caused by a corrupted places.sqlite database file.
You can check for problems with the places.sqlite database file in the Firefox profile folder.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
Note that you lose all history if you remove the places.sqlite file.
*History Export: https://addons.mozilla.org/firefox/addon/history-export/

ITunes stops updating podcasts / iTunes has stopped updating this podcast because you have not listened to any episodes recently. Would you like to resume updating this podcast?

Hi,
My iTunes is set to automatically update podcasts and keep the last five episodes of each podcast.
However, iTunes appears to stop updating podcasts after several (five?) unwatched episodes and gives me an exclamation mark in the podcast overview. Clicking on that, I get the message: "iTunes has stopped updating this podcast because you have not listened to any episodes recently. Would you like to resume updating this podcast?"
This is not what I intend... and not what I told iTunes to do... (at least this my reading of the below settings)
This stopping is rather less then ideal: (1) if I am going away for two weeks, which I often do, I would still like to have the last five days of news, not the last five days of news back from the date I left, (2) I need to click update for approx. 20 podcast on regular basis, (3) my iPhone is synced to iTunes as soon as I come home, if iTunes does not have the podcasts downloaded, they are not copied over to the iPhone, and the iPhone will attempt to download the episodes via 3G next time I play the podcast on the go, (4) I am mainly using iTunes functions, such as smart playlists and podcasts, through another app (Plex, a fullscreen media player) and it is a pain to have to go to iTunes to manually do things. That is why this bothering me...
How can I get iTunes to behave as intended? (From reading through old posts I know that there is a Doug script adressing this problem, which I have just set up, but I would prefer to use internal settings if possible... maybe I am just missing a setting)
Thank you for your ideas!

Thank you for the response, Roger!
OK, that's how it is then.
The iTunes podcasts settings should be reworded in that case because it suggest something different from what it does. And, of course, it would be ideal for Apple to make this more flexible and allow users to set up their podcast downloads in their way and not be so motherly (c'mon, Apple, your users are not as dumb as you think, and they have uncapped Internet connections these days anyway)...
Btw., for anyone interested, this is external script I am using now:
http://dougscripts.com/itunes/scripts/ss.php?sp=updateexpiredpodcasts
Including the "cron job" setup here:
http://dougscripts.com/itunes/2011/12/updated-update-expired-podcasts-v2-2-and-l aunchd-project/
Cannot tell how well it works because I have just set it up, other members of the forum say it works for them...
If anyone knows of in-app solutions, please share...

ACPI battery level stops updating

Hello,
I have a strange problem with battery level (displayed using xfce4-power-manager). At startup it updates but not very precisely (not percent by percent), after some minutes it stops updating.
I thought it was an xfce problem, so I installed xfce4-power-manager-git. But reading acpi status and getting /sys/class/power_supply/BAT0/ info reports same results as xfce. ACPI does not update battery level!
Why acpi stops updating my battery level?
I'm using kernel 3.15.10-1
xfce4-power-manager-git
xfce4-power-manager 1.4.1-1
upower 0.99
lah

No one interested about this problem?
Now, to get battery level I'm manually polling using a cron job executing acpi -V command...
I've not yet found another solution to get battery level update working.
I found another interesting point. When I resume from suspend battery level updates... Here are my logs when suspending / resuming
dmesg
[ 1137.086386] wlo1: deauthenticating from 00:1f:9f:e7:22:53 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 1137.092006] cfg80211: Calling CRDA to update world regulatory domain
[ 1137.168083] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 1137.307402] PM: Syncing filesystems ... done.
[ 1137.390588] PM: Preparing system for mem sleep
[ 1137.390812] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 1137.392234] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 1137.393433] PM: Entering mem sleep
[ 1137.393499] Suspending console(s) (use no_console_suspend to debug)
[ 1137.394631] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 1137.394711] sd 0:0:0:0: [sda] Stopping disk
[ 1137.557027] e1000e: EEE TX LPI TIMER: 00000011
[ 1137.809968] PM: suspend of devices complete after 416.371 msecs
[ 1137.823466] PM: late suspend of devices complete after 13.483 msecs
[ 1137.824416] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 1137.824592] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[ 1137.824603] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[ 1137.824680] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[ 1137.836734] PM: noirq suspend of devices complete after 13.269 msecs
[ 1137.837000] ACPI: Preparing to enter system sleep state S3
[ 1137.853504] PM: Saving platform NVS memory
[ 1137.853505] Disabling non-boot CPUs ...
[ 1137.853535] intel_pstate CPU 1 exiting
[ 1137.854780] kvm: disabling virtualization on CPU1
[ 1137.854790] smpboot: CPU 1 is now offline
[ 1137.855147] intel_pstate CPU 2 exiting
[ 1137.856377] kvm: disabling virtualization on CPU2
[ 1137.856383] smpboot: CPU 2 is now offline
[ 1137.856949] intel_pstate CPU 3 exiting
[ 1137.858168] kvm: disabling virtualization on CPU3
[ 1137.858180] smpboot: CPU 3 is now offline
[ 1137.859931] ACPI: Low-level resume complete
[ 1137.859980] PM: Restoring platform NVS memory
[ 1137.861096] CPU0 microcode updated early to revision 0x1b, date = 2014-05-29
[ 1137.861225] Enabling non-boot CPUs ...
[ 1137.861272] x86: Booting SMP configuration:
[ 1137.861273] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 1137.873339] kvm: enabling virtualization on CPU1
[ 1137.875919] CPU1 is up
[ 1137.875970] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 1137.887493] CPU2 microcode updated early to revision 0x1b, date = 2014-05-29
[ 1137.888105] kvm: enabling virtualization on CPU2
[ 1137.890491] CPU2 is up
[ 1137.890527] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 1137.902171] kvm: enabling virtualization on CPU3
[ 1137.904609] CPU3 is up
[ 1137.908608] ACPI: Waking up from system sleep state S3
[ 1138.663122] acpi LNXPOWER:02: Turning OFF
[ 1138.663203] acpi LNXPOWER:01: Turning OFF
[ 1138.675606] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 1138.675825] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[ 1138.675838] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 1138.722182] PM: noirq resume of devices complete after 58.952 msecs
[ 1138.722883] PM: early resume of devices complete after 0.648 msecs
[ 1138.723159] mei_me 0000:00:16.0: irq 32 for MSI/MSI-X
[ 1138.723478] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[ 1138.726178] snd_hda_intel 0000:00:1b.0: irq 33 for MSI/MSI-X
[ 1138.731841] sd 0:0:0:0: [sda] Starting disk
[ 1138.841851] e1000e 0000:00:19.0: irq 34 for MSI/MSI-X
[ 1138.928730] usb 1-1.3: reset high-speed USB device number 4 using ehci-pci
[ 1139.045227] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1139.045398] usb 3-2: reset high-speed USB device number 2 using xhci_hcd
[ 1139.045414] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 1.
[ 1139.045416] usb 3-2: hub failed to enable device, error -22
[ 1139.047871] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 1139.057847] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 1139.058273] ata1.00: configured for UDMA/133
[ 1139.205382] usb 3-2: reset high-speed USB device number 2 using xhci_hcd
[ 1139.205409] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 1.
[ 1139.205412] usb 3-2: hub failed to enable device, error -22
[ 1139.365138] usb 3-2: reset high-speed USB device number 2 using xhci_hcd
[ 1139.378870] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b3b73120
[ 1139.841774] usb 3-2.6: reset low-speed USB device number 3 using xhci_hcd
[ 1139.841797] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2.
[ 1139.841800] usb 3-2.6: hub failed to enable device, error -22
[ 1140.098137] usb 3-2.6: reset low-speed USB device number 3 using xhci_hcd
[ 1140.098161] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2.
[ 1140.098165] usb 3-2.6: hub failed to enable device, error -22
[ 1140.101400] tpm_tis 00:01: TPM is disabled/deactivated (0x7)
[ 1140.101410] rtc_cmos 00:03: System wakeup disabled by ACPI
[ 1140.354747] usb 3-2.6: reset low-speed USB device number 3 using xhci_hcd
[ 1140.370114] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b3b73180
[ 1140.370126] usb 3-2.6: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1140.380774] PM: resume of devices complete after 1658.753 msecs
[ 1140.381265] PM: Finishing wakeup.
[ 1140.381268] Restarting tasks ...
[ 1140.381412] acpi PNP0501:00: Still not present
[ 1140.382480] usb 2-1.6: USB disconnect, device number 3
[ 1140.389100] done.
[ 1140.421569] pci_bus 0000:01: Allocating resources
[ 1140.421585] pcieport 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 1140.421589] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
[ 1140.421599] pci_bus 0000:02: Allocating resources
[ 1140.421622] pcieport 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 1140.421624] pcieport 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 1140.421632] pci_bus 0000:03: Allocating resources
[ 1140.421658] pcieport 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
[ 1140.421660] pcieport 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[ 1140.421663] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 1140.421668] pcieport 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 1140.421670] pcieport 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 1140.421672] pcieport 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 1140.421674] pcieport 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 1140.421676] pcieport 0000:00:1c.2: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 1140.421677] pcieport 0000:00:1c.3: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 1140.421687] pcieport 0000:00:1c.0: BAR 15: assigned [mem 0xbf200000-0xbf3fffff 64bit pref]
[ 1140.421697] pcieport 0000:00:1c.2: BAR 15: assigned [mem 0xbf400000-0xbf5fffff 64bit pref]
[ 1140.421702] pcieport 0000:00:1c.3: BAR 15: assigned [mem 0xbf600000-0xbf7fffff 64bit pref]
[ 1140.421707] pcieport 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff]
[ 1140.421710] pcieport 0000:00:1c.2: BAR 13: assigned [io 0x4000-0x4fff]
[ 1140.421713] pcieport 0000:00:1c.3: BAR 13: assigned [io 0x5000-0x5fff]
[ 1140.421980] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 1140.422076] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 1140.549726] e1000e: enp0s25 NIC Link is Down
[ 1140.550076] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 1140.577868] usb 2-1.6: new full-speed USB device number 4 using ehci-pci
[ 1140.662671] usb 2-1.6: string descriptor 0 read error: -22
[ 1140.684516] e1000e 0000:00:19.0: irq 34 for MSI/MSI-X
[ 1140.771126] usb 2-1.8: new full-speed USB device number 5 using ehci-pci
[ 1140.784983] usb 2-1.6: USB disconnect, device number 4
[ 1140.787680] e1000e 0000:00:19.0: irq 34 for MSI/MSI-X
[ 1140.971041] usb 2-1.6: new full-speed USB device number 6 using ehci-pci
[ 1141.055968] usb 2-1.6: string descriptor 0 read error: -22
[ 1144.446140] wlo1: authenticate with 00:1f:9f:e7:22:53
[ 1144.455094] wlo1: send auth to 00:1f:9f:e7:22:53 (try 1/3)
[ 1144.457056] wlo1: authenticated
[ 1144.459038] wlo1: associate with 00:1f:9f:e7:22:53 (try 1/3)
[ 1144.463874] wlo1: RX AssocResp from 00:1f:9f:e7:22:53 (capab=0x411 status=0 aid=1)
[ 1144.463995] wlo1: associated
lah

ITunes has stopped updating my podcast, posted weekly

iTunes has stopped updating my podcast, posted weekly: http://itunes.apple.com/us/podcast/kpfk-4-oclock-report-jon-wiener/id492010645
first one missing is Oct. 29, http://archive.kpfk.org/mp3/kpfk_141029_160001johnwiener.MP3
http://archive.kpfk.org/xml/johnwiener.xml -- how can I fix this?

iTunes is not reading your feed at all because there is a parsing error in Episode 7:
<item>
<title>Episode 7 - How to Invade Africa</title>
<link>http://thehistoryofpodcast.blogspot.co.uk/2012/07/a-history-of-hannibal-episode- 7-how-to.html/link>
There is no '<' in the closing 'link' tag and this is wrecking the feed.

CCMS job monitoring -- RZ20 job history node get duplicated record

Hi,
I configured CCMS/Solution Manager auto monitoring job failure. When a job failed on my satellite system, it created a alert and send notification to my CEN, which is my solution manager. Then solution manager send e-mail to a distribution group.
This is working fine until last week. Now when a job failed, in job history node of RZ20 of my satellite system, the alerts are created mutiple times even the job actually only failed once. For some reasons, the history node of the alerts are updated every 5 minutes with the same job failure. More interestingly, after one hour, it did not create alerts any more. However, as the result I get many e-mails with the same job failure in this once hour, which I expect only one e-mail.
Do you guys encounter the same problem? I am wondering something has been unintentionaly turned on so it's updating every 5 minutes. I want to turn it off. I looked at SM37 try to find if some batch jobs are doing this but did not find anything running on every 5 minutes.
Any helpful answers will definitely be appreciated and reward point.
Yujun Ran

Hi Suhas,
Once we had the same issue. But once we updated the current ccmsagent in both Solution manger and the satellite system the issue got resolved.
Regards,
Rafikul Hussain

Favicon stopped updating

Recently noticed favicons stopped updating. Seems some of my history is working, but any newer favicons are just blank. Looking at page info shows no icon files are downloading. I cannot find any setting that controls/sets this. Anyone having this issue?

The next time you are on that web page, Go to Tools > Page Info. In the Media tab, there should be a link to the favicon. Try visiting the exact URL of the favicon.

Activity Monitor Stops Updating

First post here.. thanks for any help
I've been using OSX Leopard since release, and for some reason Activity Monitor stops updating after a while. Sometimes after 10 minutes or 20 minutes. Then my processes stop updating, including stuff in the process list and any summary info below it such as disk activity, memory activity, etc. I use the floating CPU window as well (cmd-4) which continues to update, but doesn't behave well with Spaces which is another gripe of mine but not the point of this post.
By going and changing the refresh rate, it starts responding again, though it's easier to simply quit and reopen the app. This is a big issue for me as I leave Activity Monitor open 24/7 and having to open/close it constantly throughout the day is bothersome.
Oh, and for my install, I did a fresh install and updated to 10.5.1. I'm on a Dual-quad core 3.0ghz Mac. Many thanks.

I also trashed the plist file and it worked for a little while but then back to the previous behavior which is not refreshing the process table list, or network traffic, or disk activity, the only thing that keeps on refreshing is the CPU history.

Print job starts, stops on last page of job, then finally restarts.

Hello, I have an HP Office Jet Pro 8500 (A909), connected via router (ethernet cable). Windows 8, HP Pavillion machine, i5 processor, 64 bit, 6gigs ram
The print job starts, stops on last page of job, then finally restarts, then starts whole print job over with same results; pausing for about a minute, restarting and finishing job but the driver must detect that the job - still in the queue - is not done and starts again.
I've swapped ethernet cables with the same results. I can print over the wireless network with other computers and do not have this issue.
I thought it was a driver issue so I uninstalled/reinstalled HP software, with all available updates, same results.
The only work around at my disposal now, other than printing from another machine, is to wait for the last page to print and manually clear the queue so the job doesn't print again. Suggestions?
Thanks

Hey @DavidWW ,
Thank you for joining us on the HP Forums today, hope you enjoy your time with us! Also thank you for taking the time to thoroughly explain the issue, much appreciated.
I understand you are having an issue with the last page printing late, the computer not recognizing it, re-printing and so on. You need to print, wait for stall and then last page and then clear queue to stop the printer. That is truly annoying, however; I might have a fix for you in 1 simple post... maybe not, but maybe at least.
Try the tool I have posted below and run the print fix option.
Click here to download and run the Print and Scan Doctor >>> www.hp.com/go/tools
If that doesn't fix your issue make sure you let me know and we can continue.
I worked for HP.

Huge SharePoint_Config Database/Timer Job History Overflow

Hello All,
I know there are quite a few sites about this issue, but none of them seem to work for me so I was hoping for some help.
Just for reference, this is in my dev environment on a VM running:
SP2010
SQL Server 2008 R2
Windows Server 2008 R2
It is the same old story of SharePoint's "Delete Job History" timer job not running and therefor the “TimerJobHistory” database table growing massive. For the last couple of months
my drive keeps running out of space and putting a halt to my work. So I went to the Net looking for a solution. I found a few that looked promising, but either caused more problems or simply did not work. Now that I have my environment back up and running
I was hoping for some help in solving this.
Does anyone know how to purge the “TimerJobHistory” table so my SharePoint_Config database will not keep filling up my space? From there is there anyway to prevent this from happening again?
The “Delete Job History” will not run currently even though I have adjusted the days to keep history and increased the duration that the job should run.
So far here is what I tried and the results:
http://sharepoint.it-professional.co.uk/?p=228 – Runs for a while and seems promising, but keeps growing the log and database
file until out of space, then crashes. I have to spend a lot of time freeing up space, detaching, and reattaching the config database. At this point I have removed everything from that drive that I can so no more space can be freed.
Shrinking files – This is only a temporary fix and I heard that it is a bad idea to do this more than once every now and again anyway. I am sure my database is already fragmented terribly
(which also if anyone can point me to a working solution for defragging in SQL Server 2008 R2 I would greatly appreciate it.)
There are a number of other sites that make recommendations that seem to be… well… less than what would be considered a “good practice” so I avoided those.
For the time being I have done what I had hoped not to and turned the SharePoint Timer service off to prevent the database from filling up again. If I turn it back on the log fill will be full
in a matter of seconds which will move me back to no space and in a bad position.
This seems to be happening to all the devs here, but I got a bit too brave and tried to find a solution… I learn a lot from my mistakes though!
If any other information is needed, please let me know.
Any help would be GREATLY appreciated.
Thanks,
J.

Hi,
We need to reduce the amount of data being deleted by the timer job during each run, so I need to modify the daystokeephistory value of the timer job.
The following PowerShell script for your reference:
$history = Get-SPTimerJob | Where-Object {$_.name -eq "job-delete-job-history"}
$history.daystokeephistory = 25
$history.update()
$history.runnow()
More information:
http://convergingpoint.blogspot.com/2012/05/sharepoint-configuration-database-too.html
http://www.techgrowingpains.com/2012/01/out-of-control-sharepoint_config-database/
Best Regards
Dennis Guo
TechNet Community Support

HT201077 After updating my iPhone4s to the lastest update my photostream stopped updated onto my comuter. From my phone it looks like pictures have been moved into the photostream folder... but they are not showing up on my computer. Help!

After updating my iPhone4s to the lastest update my photostream stopped updated onto my comuter. From my phone it looks like pictures have been moved into the photostream folder... but they are not showing up on my computer. Help!
I have signed out then back into the cloud. I have comfirmed location of the photostream folder. I have have even restored settings on my phone. any ideas on what I can do to get it working again? or do I have to accept defect, and manually save my photos?

There's a whole lot to read in your post, and frankly I have not read it all.
Having said that, this troubleshooting guide should help:
http://support.apple.com/kb/TS1538
In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it.

How can I make sure iTunes doesn't stop updating my podcasts

OK I'm subscribed to multiple podcasts, but I don't always get a chance to listen to them so some of them will stop updating and it says something like "iTunes has stopped updating this podcast because you haven't listened to any episodes lately".
How can I make sure it doesn't do that? When I do get to listen to my podcasts, I would really like it if they weren't 3 weeks old.
Message was edited by: MacAttakk

someone made a script that fixes this. It seems to work for me. If you want it to do it automatically just make an iCal even for every 3 days or something that runs this script.
http://dougscripts.com/itunes/scripts/download.php?sc=updateexpiredpodcasts

Format of Date Field in RAR background job history page

Hi Everyone,
Is it possible to customize the format of the fileds: "last run", "next start" in RAR background job history page?
By default it is in the format yyyy-mm-dd.
I am just wondering my customer's requirement is possible or not?

Hi,
There is no option to set the date format in the Configuration settings. Check the FM /VIRSA/ZCC_GET_STATREC_DATA which has the CALL FUNCTION 'GET_SYSTEM_TIMEZONE'. RAR will read the time from the system.
You may look at formatting the the date format here.
Hope this helps!!
Warm Regards,
Raghu

How to schedule job V3 unserialised Update job for Inventory

Hi gurus,
How to schedule job V3 unserialised Update job for Inventory management
What are the things need to be configured
Thank you

Hi,
In R/3 go to SBIW > Settings for Application-Specific DataSources (PI) > Logistics > Managing Extract Structures > Logistics Extraction Structures Customizing Cockpit
UIn this Screen you can define delta type, and the jog usign the control job option.
Regards,
Dani

Job History stopped updating

Similar Messages

Maybe you are looking for