Job is not in Active mode, still in Ready mode in the source system

Hi Folks,
Process Chain carrying some data loads asusally today also, i noticed there is no action in the details tabs, then i checked in the source sytem, jobs in ready mode. why it is turned like this.
Can any one provide your valuable inputs on this...
Thanks,
V

Hi ,
Thanks for your quick responce on this..
My issue has been resolved: Issue occured due to in the source system issue. All BW job has been scheduled in one particular application server which is facing more than issue.
Basis team involved and resolved them.

Similar Messages

My iphone4's mic is not working. I can assure that my iphone4 is not on mute mode. The audio is working only when headset/handsfree plugged in.I tried reset my handset many times already but still nothing got success.what is the remedy to comeout from it.

My iphone4's mic is not working. I can assure that my iphone4 is not on mute mode. The audio is working only when headset/handsfree plugged in.I tried reset my handset many times already but still nothing got success.what is the remedy to comeout from it.

Try plugging the headphones in and gently wiggling them around for a few seconds. It may be that the sensor that tells the iPhone that headphones are plugged in has gotten stuck. If this doesn't work, they try a reset (hold down Sleep/Wake and Home all the way until the Apple logo appears on the screen).

My Time Capsule expired and no longer works. My printer (a HP) will now not work as it still wishes to connect through the Time Capsule. It will not allow itself be recognised through a USB connection to my Mac. Anyone got any ideas?

My Time Capsule expired and no longer works. My printer (a HP) will now not work as it still wishes to connect through the Time Capsule. It will not allow itself be recognised through a USB connection to my Mac. Anyone got any ideas?

You will need to install the printer on your Mac
Open System Preferences (gear icon) on the dock
Open Print & Fax
Click the + (plus) button at the bottom of the printer list
Wait for your printer to appear in the next box, then click it to highlight it
Click Add at the lower right
Be sure to select the correct printer when you try to print as you will see your printer listed twice. Good idea to make the printer now installed on your Mac the default printer so you do not have to choose which printer to use each time you want to print.
You can also go into Print & Fax, select the printer associated with the Time Capsule and click the - (minus) button if you want to delete that location.

Error Infosource is not defined in the source system

I am extracting data into ODS. It was running perfectly till now. But today i am getting this error.and for all packages i run. whether it is transaction data or master data.
I replicated the DataSource and activated all the objects and transfer structure.but still getting the same error.
I even created a new DataSource and infosource but still the error persists. please help me in this matter.
Thanks

the data is extracted from BW system itself (Self System).
there are three tables linked to each other.I have created an infoset query and creted datasource on that infoset query.
the source system is the same bw system.
The detailed error report is -
InfoSource is not defined in the source system.
Message no. R3005
Diagnosis
The InfoSource specified in the data request, is not defined in the source system.
System response
The data transfer is terminated.
Procedure
In the Administrator Workbench of the Business Information Warehouse, update the metadata for this source system, and delete the InfoPackages belonging to InfoSources that no longer existing .

InfoSource 80FIAR_O03 is not defined in the source system

Hello,
I am facing one issue while running process chain in Test client.
Isssue: 0FI_AR_4 process chain loading to ODS successfull. the next step in process chain is further update. data is goint to cube. error getting u201CInfoSource 80FIAR_O03 is not defined in the source system.u201D i have replicated the DS and activated 3-4 times also ran progam also. but still getting same error message. i deleted data from cube. In productio its running fine.
currently client is updating ECC 6.0 system
what could be root cause?
Thanks in advance
CPY

Hi,
Can you please check this thread :
Re: InfoSource 80FIAR_O03 is not defined in the source system
Cheers,
Tanish.

Data Source Z*** is not defined in the source system

Hello All,
I am facing a well known problem extracting data from R3 to the BI side. On both sides I've got SAP ALL.
I created data source on R3 DEV side, tested it and it extracts data. I've replicated metadata on BI side and activated the data source. The problem starts once I create the info package as no data is availble in PSA.
I went to extractor checker and tried to start the extraction and I could see the message: data source Z**** not defined in the source system.
I tried to locate the data source through RSA5 and I cannot see that it is availble there.
Can you please help and advise where the problem is?

Hi Neb,
It can be related to many issues, one of them can be RFC connection issue. Please check the link below :-
Datasource xxx is not defined in the source system
It might give you some of ideas. Also if possible can you tell what Datasource are you having problem with.
Regards
Sunny

Hello Apple? How do i fixed my problem with my ipad apps every time i open that apps it takes 10min. to play the games ant its getting LOST MODE and the ipad system is crashing

How do i fixed my problem with my ipad apps every time i open that apps it takes 10min. to play the games ant its getting LOST MODE and the ipad system is crashing

We are fellow users here on these user-to-user forums, you're not talking to iTunes Support nor Apple.
Have you tried closing all apps via the iPad's multitasking bar and then doing a soft-reset and seeing that helps ? To close all apps :
iOS 7: double-click the home button to open the taskbar, and then swipe or drag each app's screen from there up and off the top of the screen to close it, and click the home button to close the taskbar.
iOS 6 and below : from the home screen (i.e. not with any app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of each app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
Soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Infosource 8ZISCMS10 is not defined in the source system

Hi Gurus,
I got an issue when loading the data with in SAP BW (Info source is ODS),It threw an error message stating "Infosource 8ZISCMS10 is not defined in the source system",
Could any one of you help me in this regrad plz,
N:B: I have activated the transfer structure through RS_TRANSTRU_ACTIVATE_ALL and replicated the data sources before loading...

When u activate DSO/ODS (say ZISCMS10) it creates datasource (8ZISCMS10) & Infosource (8ZISCMS10)
U can check these at ...... Modeling --> Datasources -> BI -> BI source system name. If it is missing .. reactivate DSO/ODS.
If the load is failing in QA, u should rereactivate DSO/ODS in DEV and transport that to QA.. After transport.. make sure datasource (8ZISCMS10) & Infosource (8ZISCMS10) appears in QA (Modeling --> Datasources -> BI -> BI source system name)

DataSource 0HR_ATT is not defined in the source system

Hi Gurus,
When I am trying load data for HR Master data Attribute it is not loading any anything. I checked that datasource in Rsa3 at R/3 side there it is showing
"DataSource 0HR_xx_attr is not defined in the source system", can anybody give me the solution.
I will assign full points.
Thanks in advance.

Hi Sergio,
I have replicated the datasource in BW. Still It is showing the same.
Kindly advice.
Maruthi

DataSource 2LIS_11_VAHDR is not defined in the source system

I have a problem when I had activated the Data Source called 2LIS_11_VAHDR in ERP DEV and then put it in a request to be transfered to ERP Prod
Then I am using RSA3 I receive the following error
DataSource 2LIS_11_VAHDR is not defined in the source system
I tried to activate this data source several times in ERP Dev and send it to production without any success

I am sure you would have done these steps, but just a double-check.
1. RSA5 - Install the data source
2. RSA6 - Activate the data source
Check in LBWE if the data source is available.
All this will be captured in a transport request(s) - you may may have a Workbench request & a Customizing request.
Also, before transporting, please check in your target system whether the datasource is available or not (RSA5).
Further to the above, do a check in Dev for the following.
After activating it in RSA6, fill the setup tables for 2LIS_11_VAHDR - i.e. thru' transaction OLI7BW.
And check the data in RSA3.

Extraction Problem - DataSource is not defined in the source system

Hi,
I am loading transaction data into sales cubes, while loading in process chain it shows "No Data"
so when i go in rsa3 extration for checking availibilty of data.
The following message shows,
DataSource 2LIS_12_VCHDR is not defined in the source system.
In LBWE first it was shown Inactive then i make it active.
So, what is the procedure to defined this data source to the source system.
Thanks & Reagards,
SD.

Hi All,
Thanks for ur reply.
But i can not found the datasource in RSA5, can anyone explain how to find the datasource in RSA5?
Datasource name : 2LIS_12_VCHDR , Cube Name : 0SD_C03
and how to activate in RSA5 ? & after activation how can migrate the same datasource in r3 side by replication?
Also the procedure to fill up the setup tables and then do the loading from r3side by thorugh infopackage...
Thanks & Regards,
SD

RFC Error:The BW IDoc type ZSBA011 is not the same as the source system

Hi Experts,
RSA1Source System (Context Menu) Check
I am getting the below error
<b>The BW IDoc type ZSBA011 is not the same as the source system IDoc type ZSBD012               </b>
What might happened wrong.When i checked with my Basis Consultant who is new to job,Replied every this is ok with regeards to RFC.
Where should i check to correct the error
Thanks

Hi,
Did you do a system copy for BW ?
Try a restore (rightclick on your source system) in most cases this will solve the problem.
If not check the notes below:
184322 Procedure after DB copy of BW source systems
886102      System Landscape Copy for SAP BW 2.X, 3.X and NW2004s BI
325470      Activities after client copy in BW source systems
325525      Copying and renaming systems in a BW environment
184754      Procedure after BW database copy
184447      Building a BW-system landscape
184971      Notes on BW source system connections
140276      Error in source system assignment
524554      Storing destinations in the BW environment
538052 Maintenance of Myself destination in BW
Regards, Patrick Rieken
Message was edited by:
        Patrick Rieken - BI-Formance B.V.

Job Termination In the source system (TSV_TNEW_PAGE_ALLOC_FAILED)

Hi Experts,
   I have a load in bw which extracts the data from R/3. In the IP selection i have OLAP variable set to 0calmonth and the selection is one month. The loads gets failed with the page allocation error in the source system. I tried reducing the packet size with different option. Still i couldn't complete the load.
If any one come across with this kind of situation please help to resolve this issue.
Thanks
Deepthi

Hi ,
Below are the parameters and values for them which are recommended by SAP.There is a SAP Note available for this.ASk yr basis consultant to check the notes.
ES/TABLE                    SHM_SEGS
ES/SHM_SEG_SIZE             2048
em/global_area_MB           250
abap/heap_area_total        4000000000
abap/heap_area_dia          2000000000
abap/heap_area_nondia       2000000000
ES/SHM_PROC_SEG_COUNT       16
ES/SHM_MAX_PRIV_SEGS        15
ES/SHM_USER_COUNT          2048
ES/SHM_SEG_COUNT           2048
Need to do a system bounce for the parameter change to take effect.
Regards
Balaji

Trans struc is not available for InfoSource ZF_GLER in the source system

Hello Experts,
I am facing an issue:
While trying to load data in the data target(ODS) from the data source ZF_GLER i am getting an error message :
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
The error message states that: No transfer structure is available for InfoSource ZF_GLER in the source system
For this I activated the data source in se38> RS_TRANSTRU_ACTIVATE_ALL.
After this I tried to load data again I am getting the same error.
Pls provide me the solution
Thanks in Advance,
Amit

Hi,
This is a Time stamp error
You need to Replicate the respective Data source from the corresponding source system first then Activate the Transfer Rules and load again
If you are in Production system you cannot activate transfer rules directly
Go to SE38 --> run the Program RS_TRANSTRU_ACTIVATE_ALL --> mention the infosource and click execute. this will activate the transfer rules and try to reload.
Regards,
Gunjan.

RFC destination BW could not be created in the source system R3073

I'm creating a source system for our BW (version 7.0) dev client.I'm linking it to our R/3 4.7 QA client. From RSA1 I select create source system, I enter the system information and in the next screen I'm prompted to log on as system administrator. I'm in QA now and the system automatically crated the RFC connection. I test the connection and it runs ok. I log on to the BW client from QA and it logs on just fine. When I exit the screen I get the following message:
RFC destination BW could not be created in the source system message number R3073
Why is this happening? The connection tests just fine.
I'm using RFCREMOTE user in BW and ALEREMOTE in QA with the same password
Any ideas?
thanks

Hi,
I cannot tell you surely the settings for SCC4 now (I can't connect to my sys).
Nevertheless, create your R3QA RFCDEST manually in your BWDEV with SM59.
Create your BWDEV RFCDEST manually in your BWQA .
Perform test and authorization test within SM59 from both sys.
When creating the source system in BW the system will detect the RFC and ask you if you want to use it; accept an proceed the the rest of the procedure.
hope this helps...
Olivier.

Job is not in Active mode, still in Ready mode in the source system

Similar Messages

Maybe you are looking for