Job Mgmt : error "This component cannot be used" when sending job request
Hi,
When i try to create a job request (basic job request link from the Job Management Workcenter), I am having an error : "This component cannot be used".
It seems the component is the number read from the ibase corresponding to the client and the sid. There seems to be ne problem on this side.
But everything is correctly setup regarding Ibases and components.
What's more when trying to create a ZLFJ (duplicated from SLFJ) in CRMD_ORDER, there is no problem.
Any suggestion where it could come from ?
Hello Hervé ,
could you please provide me with some more information?
When exactly do you get the message? When trying to submit the job request? Or when clicking on the link "Create Job Request" in the workcenter?
If you get the message when submitting, please provide more information on the entered System (IBase). Maybe a screenshot could help.
Best regards,
Jonny
Similar Messages
-
I plug my I-Phone 3gs into iTunes on my laptop and this error comes up : :This iPhone cannot be used because the Apple Mobile Device service is not started". Its doing this on my phone and my wives, both 3gs's. Is there a setting in i-tunes somewhere? I just finally got I-tunes downloaded on my computer after a corrupt file problem
See http://support.apple.com/kb/TS1567.
-
Can anyone help with this error message? Not currently able to sync iPhone or update software because of the error message.
Thanks!
Leigh BandyHelp here > iPhone: How to restart the Apple Mobile Device Service (AMDS) on Windows
-
The 64-bit iTunes is definitely installed, but it doesn't recognize it as such and won't allow me to sync my devices. Previous steps that I found here (which are to crack open the installer to isolate the mobile support file) don't work, since I can't extract files from the installer. This problem occurs with both my iPad and iPhone.
Hello there CalCoo,
Looks like we need to get the 64 bit version of iTunes installed on your system there. First start here, and remove iTunes and its components from the system: Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7 http://support.apple.com/kb/ht1923.
You can download the 64 bit version of iTunes here: http://support.apple.com/kb/DL1615
All the very best,
Sterling -
"This disc cannot be used because it is not recognized" Error
For about the last month I have not been able to burn any cd's. I have just upgraded to Leopard and that still didn't fix anything. I can read cd's but when I put in a cd-r disc to burn, the error "This disc cannot be used because it is not recognized" comes up.
G5 2 ghz, Sony DVD RW DW- U10A drive.I too have been having a similar problem. I can read CDs but not burn them. The drive that I have is a pioneer 112D with the latest firmware installed v 1.24, (did it today) This drive is a replacement for one that died about 6 months ago. I have OS 10.4.11, the newest patch burn installed, repaired permissions, repaired disk from a start-up disk, tried to burn from toast, and itunes,and disk burn. I looked in the LaunchDaemons folder but it was empty. I called Pioneer and while it is still under warrantee, I have to send it in and wait 4 weeks to get it back. Not good service in this day and age! Anyone have any ideas?
-
This iPod cannot be used because the Apple Mobile Device service is not
I have a Dell 32 bit Windows XP and an iPod touch.
Recently I tried to sync my iPod but received the following error:
This iPod cannot be used because the Apple Mobile Device service is not started.
So I googled the error message and someone suggested that I go to My Computer>Manage>Services>Apple Mobile Device and manually start the service.
However when I tried to manually start the service, I got the following message:
Error 3: The system cannot find the path specified.
I tried reinstalling iTunes, but no help.Hello Jonashin,
And welcome to Apple Discussions!
Perhaps try re-installing just the Apple Mobile Device driver as described in this Apple support document.
http://support.apple.com/kb/ts1538
B-rock -
after downloading the LION OSX upgrade I am getting an error "This disk cannot be used for startup" I can go any further. I am using checkpoint fulldisk encryption software on the MACAIR
You've answered your own question.
Lion will not install on a disk with 3rd-party encryption. -
When I tried to sync my iphone 4 and ipad in iturnes, an error message popped up saying this device cannot be used because Apple Mobile Device service is not started! What does that mean and how do I start service? I've had these devices for over a year and update and sync regularly and have never seen this message before!
I got that message yesterday. I'm new at this so don't know if this is the correct solution but it worked for me. I reset my iPod by holding the 2 buttons down until the apple appears AND I restarted my computer. After that everything worked.
-
Just downloaded iTunes to new dell laptop, tried syncing my iPhone get an error message: "this iPhone cannot be used because the Apple Mobile Device service is not started". What is the issue, had this phone over a year??
I had this problem before. I like to disable extra services to speed up my computer and I disabled the Apple Mobile Device service and had to re-enable this.
You can do that by going Control Panel>Administrative Tools>Services. Once you have gone to the services window, look for Apple Mobile Device and right-click. Select "Properties". There should be some information about the service as well as the label "Startup Type" with a drop-down menu beside it. If it says "disabled", that is your problem; Change the selection to anything except disabled (Automatic is easier and ensures that you can sync as soon as itunes opens).
If this doesn't work, I would look into your anti-virus' settings. Good Luck! -
Erased all content on 3G but now won't sync with iTunes. Error states, "This iPhone cannot be used because the Apple Mobile Device service is not started." I don't want phone service on this old 3G. Just want to use it as an iTouch. Any suggestions?
Type "Apple Mobile Device service " into the search bar at the top of this page by "Support"
-
When I plug in my iphone 4S to my 64-bit computer a error box comes up in my 64-bit itunes that reads (This iphone cannot be used because the required software is not installed. Run the Itunes installer to remove itunes, than install the 64-bit version of itines.) This just started a few weeks ago. I've done a system restore on my computer, deleated and reinstalled the 64-bit itunes several times, did a registery clean, rebooted. Nothing seems to work it will not pick up my phone.
Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.) -
Hello People!
I'm getting an error message when I plug my iPhone 4 into my computer. It says, "This iPhone cannot be used because the Apple Moblie Device Service has not been started." What does this mean? I've never had this error before. It's also giving the same message with my iPod touch. Please help!
Thanks,
DanaGalYou can easily check whether you've the Apple Mobile Device in your computer.
Right click 'My Computer' , then Manage => Services and Applications => Services. Apple Mobile Device is listed in alphabetical order. If none, it means you've not download iTunes into your computer yet. If yes, please ensure the Apple Mobile Device is in 'Started' status.
Good luck -
I get an error message with I try to plug into itunes;
This iPhone cannot be used because the Apple Mobile Device service is not started.http://support.apple.com/kb/TS1567
-
When I try to sync my iPhone, I get an error message that says "This iPhone cannot be used because the Apple Mobile Device Service is not started. There's no explanation of what to do to fix it.
Follow this article:
How to restart the Apple Mobile Device Service (AMDS) on Windows -
Error message:This IPHONE cannot be used because the Apple Mobile Device service is not started. It is a 3GS version 4.3.5 (8L1). I had upgraded my ITUNES and after two attempts to update to IOS 5 (it timed out each time), I am now getting the message above. everything seems to be working. I have rebooted both computer and IPHONE. I am have had for couple of years. Anyone have other tips or ideas?
There are instructions on this page for how to start it and how to set it to start automatically : http://support.apple.com/kb/TS1567
Maybe you are looking for
-
I removed bootcamp with disktool. My harddisk drive is 500gb, but now I can only use 419gb. I tried with Lion's recovery to fix the disk without luck (stretch the window). I want to have a harddrive with one section. I could have Macintosh hd2. What
-
Java source code to compare XML based on ExamXML XML diff tool
I’m working on a project that includes comparing XML files and I need a source code on Java to compare XML fragments. I’m using ExamXML from http://www.a7soft.com to compare XML files but I need the Java source code. Can anybody help me.
-
Hi, Is there any document or point list to look for to improve performance of CIF in case of high data load. I mean what are parameters to look for in configuration. What is impact those parameters How to fine tune it. Any changes in integration mode
-
Process.exec and '-character
I am trying to run external program from my java-program on linux-platform. One of the parameters that I send to the external program is a directory and can contain spaces so I need to surround it with " ' "-characters. For some reason this does not
-
Hi Guys, I have the following volumes on my MacPro 1. Boot Disk - 465.3 GB, 200GB used 2. Raid 0 volume - 436.2 GB How easy is it for me to move the boot disk data to the raid 0 volume and then boot from the raid 0 partition. Also I have heard that i