Job Monitoring with SolMan or CCMS

Hi,
does anyone know, how to monitor jobs and zjobs within the SolMan? Or using CCMS?
Thank you

Hi Timm,
you should evaluate Business Process Monitoring capabilities within SAP Solution Manager. It offers functionality for a technical job monitoring.
You will find further information (for example detailed setup guides) in Service Marketplace: http://www.service.sap.com/bpm -> Media Library
Check the information on configuration in the Solution Manager IMG (transaction SPRO -> SAP Reference IMG -> SAP Solution Manager Implementation Guide ->SAP Solution Manager -> Scenario-Specific Settings -> Operations -> Business Process Monitoring.
Best regards
Ruediger Stoecker

Similar Messages

Queue monitoring in Solman through CCMS

Hi All,
Can some one please help me to know how Queue monitoring(SMQ1 and SMQ2 in ECC system) is possible through CCMs.
Would be thank ful if somebody can provides me steps as to how we can configure queue monitoring.
Thanks You all in advance.
Regards,
Prerna

Hi Prerna,
Please go through the below SAP Note and a link which will help you to configure Queue Monitoring in CCMS.
441269 - Setting up tRFC/qRFC monitoring in the alert monitor
http://scn.sap.com/community/pi-and-soa-middleware/blog/2012/03/25/michals-pi-tips-component-based-message-alerting
Let me know if You face any more Issues for the same.
Thanks
Ajitabh

Background Job Monitoring not getting activated

Hi Gurus,
I have been trying to use the batch job monitoring with ccms.
I have a problem in activating the "Background Job Monitoring" in few systems.
I followed the steps in SAP Note 553953 but no use.
In RZ21 i am not able to see the Background Job Monitoring under "Background" MTE .
The same is wokring in Dev but in QA and Prod its not .
Please suggest the solution and cause of the problem.
Dev

Hi,
in SAP Solution Manager there are actually tools to support you in implementing the Job Scheduling Management (JSM) standard and these tools cover the request, documentation, schedulign and monitoring of a job.
http://service.sap.com/~form/sapnet?_SHORTKEY=01200252310000087418&_SCENARIO=01100035870000000202&_OBJECT=002007974700000007302009E
Visit the following FAQs to find out more about JSM
http://wiki.sdn.sap.com/wiki/display/SM/FAQJobScheduling+Management
http://wiki.sdn.sap.com/wiki/display/SM/FAQBusinessProcess+Monitoring
Kind regards,
Martin
http://service.sap.com/jsm
http://service.sap.com/bpm

Job scheduling in solman

Hi All,
We want to configure only batch job monitoring in our Solution Manage 7.0 and we already configured initial and basic s setting in our solman.
Any suggestion on how to proceed further..
Regards,
Panu

hI
Here the best practice guide [batch job monitoring in Solman|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/97d2e8b3-0b01-0010-b787-b8ce558a51c2?quicklink=index&overridelayout=true]
if you look for business process monitoring chk here
ttps://service.sap.com/bpm --> Media Library --> Technical Information > bpm guide
Hope this helps
Jansi

RFC monitor with CCMS

Hello,
I'm implementing RFC monitor with CCMS and I have a problem.
I was able to implement the method with an auto-reaction method of send mail.
It is working fine but it doesn't repeat the alert! Let's say, imagine that the RFC isn't working since 3am... we are now at 13pm and the alert is not triggered anymore. In fact, in RZ20 I just see 1 Alert triggered at 3am.
Is there any way to set this alert to trigger every period of time?
thanks.
regards,
Filipe Vasconcelos

Hello,
first it would be good to clarify which monitor are you implementing - there are multiple RFC monitors - for example:
Availability and Performance Overview Monitor :
http://help.sap.com/saphelp_nw70/Helpdata/en/ae/cd823bd26a5c42e10000000a114084/frameset.htm
Transactional RFC and Queued RFC Monitor
http://help.sap.com/saphelp_nw70/Helpdata/en/8b/ceea3b31aac554e10000000a114084/frameset.htm
Best to type the name of monitor as displayed in RZ20.
Based on the type of monitor you might find the answer here:
http://help.sap.com/saphelp_nw70/Helpdata/en/f6/c55c3bab977239e10000000a114084/frameset.htm
(for example for status monitor you can set option "When should a message trigger an alert?" to "Always (at every message)")
Anyway I am afraid that in case you are using performance monitor there is not much you can do. Possibility can be to check if data collection method (for example function) has parameter that can do this (but I am skeptical about this) - if not then you would have to adjust data collection method or implement the monitoring in another way.
Possibility can be to use some kind of "switch". You can activate option "Display All-Clears in Alert Browser" - this will generate green alerts. Then you can program your own autoreaction method that will perform the "switch operation" (simple insert/update/delete into some Z-table you will create - based on status of alert - red/yellow/green.) Then you can have batch job running another Z-program that is reading this value and constantly reminding use via email.
If you program this in a good way (abstract autoreaction method) - you can reuse this solution for other monitors as well and easily buid you own email notification functionality.
I hope it helps.
Best regards.

SALRT_CREATE_API with CBMA and/or Central Monitoring using Solman

Hi,
Does anyone know if function SALRT_CREATE_API can be used to raise alerts in Component Based Message Alerting (CBMA) and/or Centralised Monitoring in Solman? I understand SALRT_CREATE_API worked with the classic Alert Framework.
Che

Hi Michal,
Thank you for jumping in on this thread. Great timing with your blog
However the following thread suggests we can still use SALRT_CREATE_API:
XI Alerting and Central Monitoring : some alerts remain on PI
"Try removing the "CentralMonitoringServer-XIAlerts" RFC connection from both systems (proxy and PI). Then, ensure all com.sap.aii.rwb.server.centralmonitoring.* parameters are configured correctly on PI (restart system to apply changes on exchange profile) and try executing the scenarios again.
Check the target CCMS system the RSALERTDISP report and see if the alerts are being received there."
Perhaps the above only applies in the case of a dual stack? I am not quite ready to try some examples but when I do then perhaps options will become clearer to me. I will try to remember to update this thread with what I find.
Thanks
Che

Unified Job Monitoring -Share your experiences with SAP Solution Manager 7.1

Dear Forum members,
I woudl like to introduce myself as Raghav, S. I am in the development team responsible for building the unified job monitoring workcenter starting 7.1 SP10 (onwards).
Please post your feedback, current status wrt to setup, commmon issues in this area.
I will be more than glad to help you here.
Regards, Raghav
Development Manager
CLM - Solution manager team, Labs India.

Hello Raghev,
we implemented unfied job monitoring on a larger scale by now, starting out with the monitoring of SAP Standard & Reorg Jobs.
Everything seemed quiet OK at the beginning, but over time display performance of the Monitoring UI decreased drastically (exceeding 5 Min. "per click" in the UI).
I pinned this down to the following (Oracle) SQL access:
SELECT
"CLIENT", "CONTEXT_ID", "TYPE_ID", "HASH_METRIC_PATH", "START_TIMESTAMP", "IS_CURRENT", "END_TIMESTAMP",
"METRIC_PATH", "RATING_AGGREGATE", "VALUE_MIN", "VALUE_MAX", "VALUE_SUM", "VALUE_COUNT", "VALUE_LAST",
"VALUE_DATA_TYPE", "VALUE_MAX_TIME", "LAST_TEXT"
FROM
"MES_DB_AGGREGATE"
WHERE
"CLIENT"=:A0 AND "CONTEXT_ID"=:A1 AND "TYPE_ID"=:A2 AND "IS_CURRENT"=:A3 OR "CLIENT"=:A4 AND
"CONTEXT_ID"=:A5 AND "TYPE_ID"=:A6 AND "IS_CURRENT"=:A7 OR "CLIENT"=:A8 AND "CONTEXT_ID"=:A9 AND
"TYPE_ID"=:A10 AND "IS_CURRENT"=:A11 OR "CLIENT"=:A12 AND "CONTEXT_ID"=:A13 AND "TYPE_ID"=:A14 AND
"IS_CURRENT"=:A15 OR "CLIENT"=:A16 AND "CONTEXT_ID"=:A17 AND "TYPE_ID"=:A18 AND "IS_CURRENT"=:A19
The execution plan used for this SQL is:
0
SELECT STATEMENT
1
INLIST ITERATOR
2
TABLE ACCESS BY INDEX ROWID MES_DB_AGGREGATE
3
INDEX RANGE SCAN MES_DB_AGGREGATECU
MES_DB_AGGREGATE in our case has over 5 million entries.
The parameterization of the DB incl. Memory and all should be OK.
The index range scan simply takes that long.
This might be, because the MES_DB_AGGREGATECU index has the lowest cardinality column (CLIENT) first.
Header 1
Header 2
COLUMN_NAME
NUM_DISTINCT
CLIENT
1
CONTEXT_ID
433
TYPE_ID
2192
IS_CURRENT
2
Could you have your team check on this, because with the situation as is, the Job Monitoring application seemingly becomes non-usable, as soon, as you start to scale up.
Best Regards,
Thorsten

Adapter Monitoring with CCMS

Hi,
is there anybody who already set up an adapter monitoring with CCMS using the alert framework of Runtime Workbench ?
Background:
When using the existing MTE's in CCMS (J2EE Monitor Templates - All Systems - <SID> - J2EE Applications - SAP XI Adapter Engine) only rare monitoring information related to XI messages are posted.
What I would like to see are information about the adapters provided in the logfiles of each adapter.
For example as soon there's a permission problem for a directory in File Adapter an alert in CCMS should be raised.
I already checked SAP notes 870232, 913858 and 824039.
Any feedback appreciated.
Cheers,
Juergen

Hi,
You can configure the CCMS as per the following two blogs,
Part 1: /people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i
Part 2: /people/sap.user72/blog/2005/12/05/xi-grmg-customizing-for-xi-ccms-heartbeat-monitoring-part-ii
Configure the Alert Framework with the below Blog as reference,
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
Then forward the Alerts created in the CCMS to Alert Frame work, the required steps are given in the below help links.
http://help.sap.com/saphelp_nw04/helpdata/en/3f/567ddea69d3d4c93a6aedabd08899e/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/30/62e77b2f4865488a866d4103923a93/frameset.htm
Then any alerts that gets generated in CCMS can be passed to the Alert Category kept configured in the Alert Framework.
Hope this helps you

CCMS Background Job Monitoring

We have setup CCMS background job monitoring and use it to send alerts for failed CH_* jobs. We activated an autoreaction for Job_Monitoring_Status.
Our autoreaction method has some extra functions to suppress duplicate alerts. It uses the alert text to check this. The standard alert text for Job_Monitoring_Status includes the job id + the end time: e.g.:
u201CCH_APAC_SD_RVV50R10C_DEL_BS_S1 | 03282700 | Termin, started at 12.10.2011,03:28:27 terminated at 12.10.2011,03:28:29u201D
This will let us duplicate suppression fail. We only need the job name in the alert text.
Can we change the message class for the Job_Monitoring_Status? Do we need to write our own message class?

Hi,
This is possible and perhaps the link in the thread below should help:
Simple question for CCMS Output format
Regards,
Srikishan

CCMS Background Job Monitoring Runtime Alert

Our Basis team has configured CCMS and the Background Job Monitoring for long-running jobs. They want to set up a "generic" entry (for example, * for job name) so that all jobs will be monitored for runtime longer than 1 hours (will be longer duration when moved to production). This seems to be working correctly but the alert message does not give the name of the background job that triggered the alert. The altert text is "Alert Text:3821 Sec > 3600 Sec Current value over threshold value System:DEV ". This message is coming from message class RT, number 001. How do we get the job name included in the alter message? I have looked at the messages available in message class RT but do not see one that includes a variable for job name. We do not know where to look to see what data is actually available for the alert text message and what other message classes might be possible.

Hi,
This is possible and perhaps the link in the thread below should help:
Simple question for CCMS Output format
Regards,
Srikishan

RZ20 CCMS background job monitoring not collecting updated information

System: ECC 6
In RZ20 > background job monitoring, the jobs that I am monitoring show last data collection was on November 30, 2010. However, under "backgroud service" and "background processing servers" data collection shows current date and time. This is on a Production system, and in the QA system this is working correctly.
What could be the cause of the data collection not working for just the background job monitoring?
Edited by: Jayson Parker on Jan 27, 2011 10:13 PM

Monitoring segment needed to be reset to warmup status.

System Monitoring with Solution Manager Ehp1

Hi,
I'm Tomas Piqueres, and I'm working in a VAR SAP with Solution Manager.
Recently, we installed Solution Manager Ehp1 and we are trying to configure it for System Monitoring. When I worked with Solution Manager SP17 I used to go to transaction RZ21 to add the system I wanted to monitoring and then put the SID and RFCs of the system.
Now with Solution Manager Ehp1, when I create the system in transaction RZ21, first I have to set the Component Type to Be Monitored and then the SID, Message Server Logon Group, the client and user are set automatically, and the password I've set to user CSMREG.
when I fill all the entries, I can see the RFCs used for the monitoring of the system. Those RFCs are set automatically:
<SID>_RZ20_COLLECT
<SID>_RZ20_ANALYZE
I can't edit those RFCs, so I have to create it manually. I check that RFCs destination works fine and both pass the authorization test, so when I try to save the system at transaction RZ21, I see the following errors:
<SID>_RZ20_COLLECT_123539Error when opening an RFC connection
Error during remote call of SAL_MS_GET_LOCAL_MS_INFO function: Error when opening an RFC connection
Error during remote call of SALC function: Error when opening an RFC connection
Error during remote call of RFC1 function: Error when opening an RFC connection
I've been looking for information about those errors and how to monitoring with Solution Manager Ehp1, but I haven't found anything usefull.
Please, Could you help me?
Thanks and regards,
Tomas.

Tomas,
I need to configure EWA from my Solman system and I completed the steps (defining and creation of RFC destinations to the target systems from my Solman system). I downloaded the lates ccmsagent file from the market place based my target system configurations.
Herewith attaching the logs while I'm trying to check the profile parameter.
tqaadm@saptqa01:/usr/sap/TQA/SYS/exe/run 5> sappfpar check pf=/usr/sap/TQA/SYS/profile/TQA_DVEBMGS30_saptqa01
================================================================================
==   Checking profile:     /usr/sap/TQA/SYS/profile/TQA_DVEBMGS30_saptqa01
================================================================================
***WARNING: Unexpected parameter: DIR_EPS =/usr/sap/trans/EPS/----
***WARNING: Unexpected parameter: SAPSECULIB =/usr/sap/TQA/SYS/exe/run/libsapsecu.o
***WARNING: Unexpected parameter: abap/buffersize_part1 =1200000
***WARNING: Unexpected parameter: auth/auth_number_in_userbuffer =5000
***WARNING: Unexpected parameter: dbs/io_buf_size =100000
***WARNING: Unexpected parameter: rsau/local/file =/usr/sap/TQA/DVEBMGS30/log/audit/audit_++++++++
***WARNING: Unexpected parameter: rsau/selector1/class =35
***WARNING: Unexpected parameter: rsau/selector1/severity =2
***WARNING: Unexpected parameter: rsdb/rclu/cachelimt =0
***ERROR: Size of shared memory pool 40 too small
================================================================
SOLUTIONS: (1) Locate shared memory segments outside of pool 40
               with parameters like: ipc/shm_psize_<key> =0
SOLUTION: Increase size of shared memory pool 40
          with parameter: ipc/shm_psize_40 =1472000000
Shared memory disposition overview
================================================================
Shared memory pools
Key:   10 Pool
            Size configured.....:   642000000 ( 612.3 MB)
            Size min. estimated.:   637597428 ( 608.1 MB)
            Advised Size........:   640000000 ( 610.4 MB)
Key:   40 Pool for database buffers
            Size configured.....: 1048000000 ( 999.4 MB)
            Size min. estimated.: 1468229308 (1400.2 MB)
            Advised Size........: 1472000000 (1403.8 MB)
Shared memories inside of pool 10
Key:        1 Size:        2500 (   0.0 MB) System administration
Key:        4 Size:      523648 (   0.5 MB) statistic area
Key:        7 Size:       14838 (   0.0 MB) Update task administration
Key:        8 Size:    67108964 ( 64.0 MB) Paging buffer
Key:        9 Size:   134217828 ( 128.0 MB) Roll buffer
Key:       11 Size:      500000 (   0.5 MB) Factory calender buffer
Key:       12 Size:     6000000 (   5.7 MB) TemSe Char-Code convert Buf.
Key:       13 Size:   200500000 ( 191.2 MB) Alert Area
Key:       16 Size:       22400 (   0.0 MB) Semaphore activity monitoring
Key:       17 Size:     2672386 (   2.5 MB) Roll administration
Key:       30 Size:       37888 (   0.0 MB) Taskhandler runtime admin.
Key:       31 Size:     4806000 (   4.6 MB) Dispatcher request queue
Key:       33 Size:    39936000 ( 38.1 MB) Table buffer, part.buffering
Key:       34 Size:    20480000 ( 19.5 MB) Enqueue table
Key:       51 Size:     3200000 (   3.1 MB) Extended memory admin.
Key:       52 Size:       40000 (   0.0 MB) Message Server buffer
Key:       54 Size:    20488192 ( 19.5 MB) Export/Import buffer
Key:       55 Size:        8192 (   0.0 MB) Spool local printer+joblist
Key:       57 Size:     1048576 (   1.0 MB) Profilparameter in shared mem
Key:       58 Size:        4096 (   0.0 MB) Enqueue ID for reset
Key:       62 Size:    85983232 ( 82.0 MB) Memory pipes
Shared memories inside of pool 40
Key:        2 Size:    31168040 ( 29.7 MB) Disp. administration tables
Key:        3 Size:   114048000 ( 108.8 MB) Disp. communication areas
Key:        6 Size: 1064960000 (1015.6 MB) ABAP program buffer
Key:       14 Size:    28600000 ( 27.3 MB) Presentation buffer
Key:       19 Size:    90000000 ( 85.8 MB) Table-buffer
Key:       42 Size:    13920992 ( 13.3 MB) DB TTAB buffer
Key:       43 Size:    43422392 ( 41.4 MB) DB FTAB buffer
Key:       44 Size:     8606392 (   8.2 MB) DB IREC buffer
Key:       45 Size:     6558392 (   6.3 MB) DB short nametab buffer
Key:       46 Size:       20480 (   0.0 MB) DB sync table
Key:       47 Size:    13313024 ( 12.7 MB) DB CUA buffer
Key:       48 Size:      300000 (   0.3 MB) Number range buffer
Key:       49 Size:     3309932 (   3.2 MB) Spool admin (SpoolWP+DiaWP)
Shared memories outside of pools
Key:       18 Size:     1792100 (   1.7 MB) Paging adminitration
Key:       41 Size:    25010000 ( 23.9 MB) DB statistics buffer
Key:       63 Size:      409600 (   0.4 MB) ICMAN shared memory
Key:       64 Size:     4202496 (   4.0 MB) Online Text Repository Buf.
Key:       65 Size:     4202496 (   4.0 MB) Export/Import Shared Memory
Key:     1002 Size:      400000 (   0.4 MB) Performance monitoring V01.0
Key: 58900130 Size:        4096 (   0.0 MB) SCSA area
Nr of operating system shared memory segments: 9
Shared memory resource requirements estimated
================================================================
Nr of shared memory descriptors required for
Extended Memory Management (unnamed mapped file).: 64
Total Nr of shared segments required.....:         73
System-imposed number of shared memories.:       1000
Shared memory segment size required min..: 1472000000 (1403.8 MB)
System-imposed maximum segment size......: 35184372088832 (33554432.0 MB)
Swap space requirements estimated
================================================
Shared memory....................: 2050.4 MB
..in pool 10 608.1 MB,   99% used
..in pool 40 999.4 MB, 140% used !!
..not in pool:   34.4 MB
Processes........................: 716.8 MB
Extended Memory .................: 8192.0 MB
Total, minimum requirement.......: 10959.2 MB
Process local heaps, worst case..: 1907.3 MB
Total, worst case requirement....: 12866.5 MB
Errors detected..................:    1
Warnings detected................:    9
After checking the profile parameter I tried to run sapccm4x in /run directory but got the below error and I'm not able tomove further.
Pls have a look at these two and let me know what could I do to proceed further.
tqaadm@saptqa01:/usr/sap/TQA/SYS/exe/run 5> sapccm4x -R pf=/usr/sap/TQA/SYS/profile/TQA_DVEBMGS30_saptqa01
INFO: CCMS agent sapccm4x working directory is /usr/sap/TQA/DVEBMGS30/log/sapccm4x
INFO: CCMS agent sapccm4x config file is /usr/sap/TQA/DVEBMGS30/log/sapccm4x/csmconf
INFO: Central Monitoring System is [SMP]. (found in config file)
      additional CENTRAL system y/[n] ?   :
INFO: found ini file /usr/sap/TQA/DVEBMGS30/log/sapccm4x/sapccmsr.ini.
INFO:
      CCMS version 20040229, 64 bit, multithreaded, Non-Unicode
      compiled at   Jun 28 2010
      systemid      324 (IBM RS/6000 with AIX)
      relno         6400
      patch text    patch collection 2010/1, OSS note 1304480
      patchno       335
INFO Runtime:
      running on    saptqa01 AIX 3 5 00069A8FD600
      running with profile   /usr/sap/TQA/SYS/profile/TQA_DVEBMGS30_saptqa01
INFO profile parameters:
      alert/MONI_SEGM_SIZE = 200000000
      alert/TRACE          = 1
      SAPSYSTEM            = 30
      SAPSYSTEMNAME        = TQA
      SAPLOCALHOST         = saptqa01
      DIR_CCMS             = /usr/sap/ccms
      DIR_LOGGING          = /usr/sap/TQA/DVEBMGS30/log
      DIR_PERF             = /usr/sap/tmp
INFO:
      pid           4165682
INFO: Attached to Shared Memory Key 13 (size 200141728) in pool 10
INFO: Connected to Monitoring Segment [CCMS Monitoring Segment for application server saptqa01_TQA_30, created with version CCMS version 20040229, 64 bit single threaded, compiled at Oct 3 2008, kernel 6400_20020600_254, platform 324 (IBM RS/6000 with AIX)]
        segment status     ENABLED
        segment started at Tue Sep 14 09:35:56 2010
        segment version    20040229
ERROR: Shared Memory misconfiguration ==> can not monitor SAP application server saptqa01_TQA_30
       Dispatcher Admin Shared Memory (Key 01) and CCMS Shared Memory (Key 13) both in pool 10.
       Please change configuration with profile parameters
           ipc/shm_psize_01 = -<different pool nr>
       xor
           ipc/shm_psize_13 = -<different pool nr>
EXITING with code 1

Configure System monitoring in SOLMAN

Hi
I need some help on this. For now I have installed solman / windows 2008 / oracle 10g on VM. A test system has been added as a satellite system in solman. CCMS Agent and CCMS PING has been installed in the satellite system. I am able to use my Alert monitor in solman to check out alerts from the satellite system. what do I need to do next to integrate this with solution manager?
I have reads the document http://help.sap.com/saphelp_sm40/helpdata/EN/0b/160419162a476380b5608e7f27a742/content.htm
This talks about "Setup system monitoring" and going into change mode. I dont see the change mode or the option to setup system monitoring.
PS: SMSY is setup correctly, I can see my satellite system from there.
any ideas on how to proceed will be appreciated.
thanks
ravi

The "Setup system monitoring" option showed up after in went into solutions overview in solution_manager Tcode and clicked on a number (hyperlink) under System monitoring for SAP Solution Manager Reference

Anybody using Batch Job Monitoring?

Hi Team,
Looking for some Solman BPM Batch Job monitoring help with the "job not started" monitor. It's not detecting the alerts.
Thanks,
Milton

Dear Milton,
For setup and monitoring possibilities, see the Business Process Monitoring Set-up and User Guideline Business Process Monitoring with SAP Solution Manager Releases 7.1 SP05+,
as of page 65, e.g. chapter 6.1.2.1.2 Start procedures in detail.
Kind regards, Barbara

Error in background job scheduling in Solman 7.0

Hi Experts,
I am working with Solman 7.0 configuration. In the IMG node for Scheduling background jobs (Solution manager-> General Settings), while following the documentation to schedule the jobs, I am facing issues with the following jobs:
1. *SEND_SYSTEM_RELATIONSHIP_TO_SUPPORT *
This job got cancelled on immediate scheduling, however has been scheduled for next day. What could be the reason by which it got cancelled?
2. AI_SDK_FILL_FILE_TYPE_TABLE
I cant find a job of this name in the system (while all other jobs are already available in the system by default). But, there is a program with the same name. Should I schedule the same in SM36?
Regards,
Arun.

Hi,
Yes schedule a job with program AI_SDK_FILL_FILE_TYPE_TABLE. Hope this solves your problem.
Feel free to revert back.
--Ragu

Job Monitoring with SolMan or CCMS

Similar Messages

Maybe you are looking for